Connecting iPad to dlink DIR-600 router

I wish to connect my iPad to a DIR-600 router so I can print wirelessly. The printer and router have successfully connected but I have no idea what settings to put into the iPad to get it to connect. There is no internet involved due to location (building site). I also realise that the router in use is perhaps 'outdated', should I just be looking at upgrading that to solve my issue? Any help greatly appreciated!

Lack of internet is irrelevant to printing. If your Printer is Air Print enabled, the iPad should pick it up when connected to the wireless network provided by the router.
Look for your Printer here: http://support.apple.com/kb/ht4356
If it appears in the list, then simply go into Settings on your iPad, and tap on Wi-Fi. Search for the Dlink Wifi network and connect to it. If your Printer is configured on that same network and is airprint compatible, your iPad should pick it up to Print from any App with the ability ot Print.

Similar Messages

Unable to connect to DLINK DIR-825 router

I am trying to connect to a condo public wifi which uses a DLINK DIR-825 router. The network name and password is posted. I select the network in my wifi settings, and enter the password, and the iPad returns "Unable to join. Incorrect password". I have shutdown my iPad, restarted the router, and attempted to join the network several times, to no avail. Password is PSK2.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Wireless connection to D-Link DIR-655 router

I just got a MBP and I can't connect wirelessly to my D-link router (WPA password protected; wired connection works great). Aiport sees the router, asks for the password which I enter, and then I get the message "the selected network uses and Access Control List.. and this computer is not on the list." I've tried to add the MBP to my network using the Network Magic process for adding new devices (which worked just fine to wirelessly connect my PC laptop from work), but it can't seem to find the MBP. I tried the steps suggested by iVmichael to someone having a similar problem April 5-6, and also tried disabling my network lock, but so far haven't found the magic combination. Suggestions?
MacBook Pro Mac OS X (10.4.8) D-Link DIR-655 router
MacBook Pro Mac OS X (10.4.8)

I had a similar problem and I needed a second computer (B) using a wired connection to the router to allow the other one (A) in. This is what I did:
1. Using the wired computer (B) I opened up the network so any computer could join the network wirelessly.
2. I joined the network with (A) wirelessly.
3. Once I had successfully joined the network with (A) I used the wired computer (B) to do a search for new computers so (A) could be registered in the Access Control List.
4. Using (B) I closed the network again.
5. Now I could join the network with (A) wirelessly without any trouble.

Getting error and connection problems with iPad and DLink DI-634M router

We're seeing spotty connectivity from our iPad - sometimes it works fine, other times it can't get to any websites. Looking at our wireless router logs, I found a bunch of messages like this for the iPad's address:
"Blocked incoming TCP packet from 192.168.0.140:52023 to 74.125.0.222:80 with unexpected acknowledgement 3307518865 (expected 3307530074 to 3307595610)"
What does this indicate and how can I fix it?
Searching a bit, I found recommendations to disable SPI on the router's firewall, but I don't see any option for doing that on the DI-634M's admin pages.
Any help appreciated - thanks.

We're seeing spotty connectivity from our iPad - sometimes it works fine, other times it can't get to any websites. Looking at our wireless router logs, I found a bunch of messages like this for the iPad's address:
"Blocked incoming TCP packet from 192.168.0.140:52023 to 74.125.0.222:80 with unexpected acknowledgement 3307518865 (expected 3307530074 to 3307595610)"
What does this indicate and how can I fix it?
Searching a bit, I found recommendations to disable SPI on the router's firewall, but I don't see any option for doing that on the DI-634M's admin pages.
Any help appreciated - thanks.

Wi-Fi access using DLink DIR 615

I just bought my IPad this Saturday. Can't get Wi-Fi access using my DLink DIR 615 router at home. This router supports my brother's laptop w/no problem. My IPad works fine with other hotspots

Welcome to the Apple Discussions.
A few things to try when having issues like this, in order of use:
1. Make sure the router firmware is up to date.
2. Reboot the router by full power off and on.
3. Reboot the iPad by full power off and on.
4. Reset WiFi on the iPad, Settings > WiFi > forget the network and then reinstall the network info by hand.
It is very important to check and make sure the router is using fully updated firmware, especially since you said you are able to connect at other hotspots.
Hope this helps.
Ralph

Mac mini intermittent wireless connection to a DI-524 wireless router

My friend just got his first Mac, it is a 2.0 Core 2 Duo with Nvidia graphics and 1 GB ram. We have ahd lots of problems but the most troubling is the wireless connection, it connects to a DLink DI-524 router, it connects with full bars, some times it self assigns IP address, other times it connects gets and IP, connects to the internet and then stops working a few minutes latter. The bars for signal are all ways full regardless of problems, any help would be appreciated .
For information both of our iPhones and his laptop have no problems connecting, and staying connected.

problem seems to be with the WPA2 implementation, switch off WPA2 to nothing works no problem, moved it to WPA seems to be ok.

Dlink DIR-615 not finding connection?

Hi all, I just acquired a Dlink DIR-615 wireless network for my KDE run laptop and all seems to be good on paper but in practice i cannot connect to a web page.
i can find the box in my wifi, it shows as linked at 100%, yet on firefox it shows that the page could not be found!? ive been looking around but im not sure where to find the solution to the issue does anyone know what i could do to improve the issue? Let me know if you need more info im still green at arch if possible a little simplistic explanation would be much appreciated.
Thanks!!!

The good news is that I think your router will work just fine. Mine supports an Arch Laptop, a Macbook, a Wii, and an HP printer via wireless.
Are you using WPA or WPA-2?
Are you using TKIP or or only allowing AES?
Are you using b,g, or pseudo-n?
What is your laptop's wireless hardware?
In my case I am using the broadcom wl driver on an 802.11g link. I have the router configured for WPA-2 Only with AES encryption
When I was setting up my system, I found that if the encryption was mis-configured, I could connect to the router and could "Ping" it. Like you, however, I could not send or receive usable packets.
Here is my modules line from /etc/.rc.conf
MODULES=(hp_wmi !ssb !b43 lib80211_crypt_tkip wl acpi-cpufreq cpufreq-ondemand cpufreq_conservative cpufreq_powersave)
Again, this is for the broadcom wl driver. Notice that I specifically excluded TKIP encryption. The prohibition on ssb and b43 are required only if one is using the Broadcom wl driver.

Iphone and Ipad are not detecting airprinters with Dlink DIR-651

Since changing my router to a Dlink DIR-651, my apple deivces are not detecting airprinters.
Dlink says I need to open ports on the router.
Please advise.

Hi..I've had a variant of this problem; my internet was accessible but my devices on wifi could not see the PC on Lan. That meant no iTunes syncing, Airplay from iTunes etc.
Dlink has a strange default setting that isolates Wifi & Wired connections into different subnets.I'm assuming you have DHCP setup on your router and you're PC or MAC has internet access via the same router. Try the following steps to see if this solves the problem for you; first Log into your DLINK admin page-
1. Go to Setup -> Local Network and Uncheck the box that says 'Configure the second IP Address and Subnet Mask for LAN' - Hit Apply
2. Go to Wireless -> Wireless Basic and Uncheck 'Enable MultiAP Isolation' - Hit Apply
3. Restart your Router
You do not need to port forward. Just get the Wired & Wireless devices on the same Subnet.
Let me know if this solves your problem. I've been frustrated by my problem for months & had nearly given up.
J

Connecting AE to Dlink Router DI-624

Greetings all ! just purchased the AE and already having difficulty :P
I want to transfer music from my PC to my living room stereo.
Tried connecting the AE to my network with no sucess. Here's my config and if someone can help me make this thing work I'll be extatic!
1 pc connected to Dlink DI-624 Wireless Router
1 Ibook connected to a Dlink Wireless Access Point
1 AE.
I have no wirless network set up as there is no need to since both devices communicate out of the box. Airport Admin Utillity and Airport Setup Assistance both can't find my Router. Help!

Step one: set up your D-Link wireless router to create a wireless network. At minimum, you should configure it with a wireless network name (SSID) - follow the instructions in your D-Link router's user manual to do this (it will require running a web browser from one of the computers currently cabled to this router).
Then follow the advice posted in this discussion by David Lovell, to configure your Airport Express so that it "joins" the wireless network created by your D-Link wireless router:
Ryan O1, "Airtunes for XP with a Wired/Wireless network", 08:04pm Jan 8, 2005 CDT

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect

I can not get the iPad to connect to the internet thru the router it shows the modum but will not connect it keeps saying choose a netwokand the IP Address it automaticaly puts in is wrong?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

My MAC mini looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shut down. I have to re select the network when restarting or waking the computer up. I think this just started with Lion. My iPod and iPad have no trouble.

My MAC MINI looses the wi-fi connection to a Belkin N wireless router when it goes to sleep or shuts down. I have to re select the network when re starting or waking up the computer. I think this just started with LION. My iPod and iPad have no problem remembering the wireless network.

Thank you BGreg. That is what I have been doing, and then it works just fine. I think it was doing the same thing in the previous version of Lion. I may be incorrect about that. I upgraded to 10.7.3 a few weeks ago, and then last week I reloaded the combo update, hoping it would help. Not so. Thank you for letting me know it is a common problem. I have tried permissions in Disk Utilities, and in Macaroni, both at least 4 times, plus numerous restarts. Nothing Improves. It still can not find the internet when it wakes up or gets up.

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2. Currently router is running in mixed b and g mode.

If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

TS1398 How to connect iPad to private router not connected to the internet?

I have an iPad 2 running iOS6.1 that will not connect to my Asus RT-AC66R router when the router is not connected to the internet. The message I get on my iPad is "The cable for ethernet is not plugged in". This also happens with my iPod gen 5.
I'm trying to control Philips Hue bulbs with their Zigbee bridge connected to the router, but I do not want a connection to the internet. The Hue app works with an Android phone and an older iPhone 4 running an older iOS version without the router connected to the internet. The newer iOS6 seems to want to have access to the internet, but having internet access should not be required for this application.
If I do connect the router to the internet, the Hue app works on my iPad2 and it continues to work for a couple of minutes after I disconnect the internet cable. Then I get the message "The cable for ethernet is not plugged in" again. I'm doing this at work where I'm not supposed to connect the router to the work network cable, else it wouldn't be an issue.

mrogers641 wrote:
How can I install Mavericks on a Mac that is not connected to the internet? Is there a way to copy OS 10.9 to a USB drive an then install it?
Log in to another computer, family's or friend's, and download it to a USB drive, using YOUR OWN Apple ID and then install it onto your Mac. Preferably you could use someone else's WiFi connection to directly download and install on your Mac,
Cheers
Pete

Setting up airport express with a d-link dir 655 router on xp

I bought a new router and would like to setup my old AX to use it to stream music. I installed the airport utility which seems to find my device but I can't connect to it - via my router or the airport utility. When I select select manual or continue I get a 60 second or so delay and then it returns to the same screen - "airport utility found an apple wireless device with default settings."
Wireless Network ebxxxx
Airport ID: 00:11:xxxxxx
Any ideas on what I'm doing wrong? My laptop is plugged into the same router that my AX is. I've tried what I believe to be a soft and hard boot with the AX but so far no luck.
Thanks
Chris

AS far as I am aware only the devices listed at the top of this page do UPnP
http://support.dlink.com/faq/view.asp?prod_id=1996&question=UPnP
On some, such as the 624 listed here http://docs.info.apple.com/article.html?artnum=93333 (See note 2) it actually doesn't work with a Mac properly.
The pics of the Menus on this page http://portforward.com/english/routers/port_forwarding/Dlink/DIR-655/iChat.htm suggest it does not have UPnP
The item in the menu "Application Rules" looks like a possible name for Port Triggering (A way of allowing Multiple computers use the same ports)
However it does not seem to be listed in the Port Forward Triggering guide list
http://www.portforward.com/english/routers/port_triggering/routerindex.htm
8:29 PM Wednesday; April 30, 2008

Problem to connect to D-Link DIR-655

I have MacBook Pro with Lion 7.1 and a router D-link DIR 655 (with latest firmware). I have had problem with the WiFi connection now and then. Just now I can not see my router in list but I can see many neigbours. It happends that I can see the router but then I connect I got timeout, I have iMac also with Lion which is connected to the same router with no problem. I have alse a IPad connected with no problem. I can connect to my wireless mobilmodem with help of a Dovado 3GN Router (WiFi connection). So what I can see I can connect things to the D-Link router but not the MacBookPro and I can connect the MacBook Pro to WiFi but not to D-Link DIR 655. What shall I do?

Download the free KisMAC and in the driver preferences enable the Apple Airport PASSIVE mode in preferences and click scan.
You will need to enter your Admin password.
Use that to scan your neighbors wifi and determine the channels they use.
Reset your router channel so it's as far from the others as possible.
Also read the WIFI security section of my post here
https://discussions.apple.com/message/16276201#16276201

Connecting iPad to dlink DIR-600 router

Similar Messages

Maybe you are looking for