Connecting ipad2 to my printer

How do I connect my hp photosmart b109 to my ipad2?really stuck with this one and it's a present for my kid

Hello. I would first make sure that the firmware is up to date on the printer. Then make sure that the printer and Ipad are on the same network. You will want to check that on the Ipad by going to Settings>Wi-Fi>>Make sure that there is a check mark by your network name, and that "Ask to join other Networks" is turned on. If you have Bluetooth on, turn it off. Then to test go to camera roll/Photos and bring up a photo , locate the icon that looks like an arrow turning left in a box and see if the print option appears, then check to see if your printer is listed as an option. If not showing Power cycle both the printer and the iPad in an attempt to get them to sync up. If this does not work write me back and supply me with the make and model of your router.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

How di I connect ipad2 to Epson stylus nx330

How di I connect ipad2 to my Epson stylus nx330

The Epson NX330 is not an AirPrint printer.
To print directly from an iPad you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or AirPrintActivator (free).
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html

How do I connect ipad2 espson stylus nx330

How do I connect ipad2 to Epson stylus nx330 printer

That printer is not on the list of supported printers for AirPrint. It won't work.
Best of luck.

How to connect my iPad, Brother printer, and AirPort Extreme?

How to connect my iPad, Brother printer, and AirPort Extreme?

I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

My iMac is connected to a Brother printer. I have Snow Leopard 10.7.3 As of yesterday, when I try to print a PDF it prints as a blank black page. Does anyone know how to correct this so that the PDF will print as I see it on screen?

If you are running Mac OS X 10.7.3 then you have Lion installed, not Snow Leopard. It's probably not important to this discussion, but something you should be aware of.
What application are you printing the PDF files from? Have you tried opening the PDF file using the Preview application that can be found in the Applications folder? Does the issue still occur? Have you tried other PDF files from a different source?
Another poster in the following discussion thread reported that this method resolved their black blank PDF issue when viewing (and presumably printing) PDF files from Safari.
https://discussions.apple.com/thread/3890509?start=0&tstart=0
This solved my question by mcbuffy on Apr 20, 2012 11:29 AM
There's a solution if you want to see the PDF inside Safari's window :
Go to the folder : Your Hard Drive / Library / Internet Plug-ins.
If you see a file with PDF in its name drag it to the trash.
Quit and restart Safari to test with a PDF.
If it works you can empty the trash.

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

I have c 6180 wireless printer and an apple ipad2, can the printer print from the ipad?

i have c 6180 wireless printer and an apple ipad2, can the printer print from the ipad? how can i set it up?

Not with the built-in AirPrint print function. However, you can download free and cheap print apps that can provide some (limited) printing abilities. HP's iPrint is one of those.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I connect a Lexmark x6570 printer to my iMac wirelessly? The basic user guides are not helping me and the add printer is not finding my printer...

How do you connect a lexmark x6570 printer to an iMac wirelessly? The basic user manuals are not helpful as the printer is not showing up when using the add printer function. I my printer is working fine wirelessly with my windows laptop so it appears to be functioning fine. This is my first time using an Apple at home...
Thank you.

Hello,
I am using a Mac with this router. Any ideas how I can set it up to print wireless. Im not a tech person so this gets confusing for me sometimes.
Thanks!

You do not have sufficient access to your computer to connect to the selected printer

Environment
Print server: Windows 2008 R2 SP1
Clients: Windows XP SP3 + GPP
Drivers:
HP UPD PCL6 5.3.1.10527
Intermec 7.2.2
Ricoh UPD PS 3.9.0.0
Xerox UPD PS 5.216.12
Zebra 2.6.42.03
GPO Configuration - enables users to add printers/drivers from the print servers.
Background
For the last year, we've had the 2008R2 print server set up and the clients have not had any problems connecting to the print server to add printers.
Issue
Over the past ~3 weeks, we've gotten spurious reports from users stating they're unable to add a printer. The specific error displayed is:
You do not have sufficient access to your computer to connect to the selected printer.
It occurs for multiple vendors, so it's not a print driver specific issue. I've personally witnessed the problem where (using a User's account) I was unable to add Printer X out of a list of 10 random printers. 2 minutes later, still logged on
as the same user, I was then able to add Printer X which doesn't make any sense since nothing had changed.
Another user logging into the same workstation will not have any problems adding the same problematic printer. The user who had the problem can log onto a different workstation and add the same printer with no problems, so it's not a User permission
issue either.
Most of the time running gpupdate /force and/or rebooting the box will also 'solve' the problem.
Running the group policy results wizard on a few random workstations (which have exhibited this problem in the past), shows everything appears to be properly configured/enabled related to GPOs, including the
Prevent users from installing printer drivers setting per http://support.microsoft.com/kb/259937
Has anyone else ran into this problem lately?
How does one troubleshoot this issue since I can't faithfully reproduce it on demand since it appears to resolve itself after a period of time?

Haven't found the smoking gun to this problem, but I am getting closer.
Troubleshooted another PC today which was exhibiting this problem for another user. Logged onto the PC with my User account and sure enough, received the same message for the same printer. Fired up Sysinternals Process Monitor, but nothing useful
was captured when receiving the failure message. There was also another Point and Print printer which was present on the workstation (i.e.
PrinterName on PrintServerName) for my User account which stated "printer cannot be removed. Access is Denied" when I tried to delete it. Odd. Getting properties on the printer would bring up the correct info from the print server
though, so it was valid and appeared functional.
I tried running the new
MS FixIT printing tool, but it failed in full mode with an admin account.
Next, I searched through the registry for this printername which I was unable to delete. Eventually it was found at:
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\LanMan Print Services\Servers\PRINTSERVERNAME\Printers\PRINTERNAME
On a hunch, I deleted the entire PrinterName key, restarted the print spooler, and then was able to add the printer with no permission errors! There were several more printers listed in this registry key. I tried the same steps again:
validate receiving 'sufficient access' error.
purge printer's registry key
restart spooler
Able to add the same printer via point and print.
This solved the problem on half of the printers. The others added with no errors. The printer drivers in question are from both HP and Xerox, so I doubt it's a vendor specific issue and instead Windows (unsure if XP or 2008 though).
It would appear that Windows caches the information about the printer/driver/settings/etc from the print server in CurrentVersion\Print\Providers\LanMan Print Services\Servers\PRINTSERVERNAME\Printers\PRINTERNAME ? Why does it need to be duplicated
in both HKLM and HKCU?
Separate PC, further exploring this printer issue and the contents of the \LanMan Print Services\Servers\PRINTSERVERNAME\Printers\ keys. On this PC, I successfully ran the MS FixIt for Printing tool in Full mode and rebooted. After reboot, the
System Event logged the following for multiple printers -- which should've been deleted --
Event Type: Error
Event Source: Print
Event Category: None
Event ID: 23
Date: 4/9/2012
Time: 5:11:48 PM
User: NT AUTHORITY\SYSTEM
Computer: U-xxxxx
Description:
Printer UH-xxxxx-COLOR failed to initialize because a suitable Xerox Global Print Driver PS driver could not be found.
Event Type: Error
Event Source: Print
Event Category: None
Event ID: 23
Date: 4/9/2012
Time: 5:11:48 PM
User: NT AUTHORITY\SYSTEM
Computer: U-xxxxx
Description:
Printer UH-xxxxxx failed to initialize because a suitable HP Universal Printing PCL 6 (v5.3) driver could not be found.
Yet a minute later, the updated driver was automatically installed via P&P:
Event Type: Warning
Event Source: Print
Event Category: None
Event ID: 20
Date: 4/9/2012
Time: 5:12:22 PM
User: NT AUTHORITY\SYSTEM
Computer: U-xxxx
Description:
Printer Driver HP Universal Printing PCL 6 (v5.4) for Windows NT x86 Version-3 was added or updated. Files: <snip>
Sure enough, after checking the \LanMan Print Services\Servers\PRINTSERVERNAME\Printers\ keys, all of those printers which logged EventID 23 were still present! This time, I manually deleted the entire \LanMan Print Services\Servers\PRINTSERVERNAME\Printers\
subkeys, rebooted the PC, logged on, and those errors did not repeat.
Something strange is definitely going on with the printing subsystem on XP lately...

Unable to connect to USB shared printer

I hope someone will be able to help with this. I recently had to change my home network setup, and now I can't wirelessly connect to the USB printer shared through my PowerMac G4. Previously, I had AT&T DSL coming in through a Westell modem, with the line out going to the WAN port of the Airport Extreme base station. I then connected the LAN port on the base station to the uplink port on a Linksys switch, to which were connected the iMac G5 and the PowerMac G4. I had a Samsung laser printer connected to the USB port on the base station and an old Epson Stylus Color 740i connected to the G4 with USB printer sharing turned on in System Prefs. Everything worked fine - I could print to either printer from any computer, including wirelessly through my MacBook.
Unfortunately, I have been experiencing slow speeds with my DSL, so one of the steps an AT&T tech took was to replace my Westell modem with a new AT&T 2Wire, which also serves as a router (or switch, I'm not sure which one). Now I don't have the Linksys switch, as it's not needed. The iMac G5 and the G4 are connected directly to the modem through ethernet, and another ethernet port is connected to the WAN port on the Airport base station. There is no connection to the LAN port on the base station. The two printers are connected in the manner I described above. I can print to either printer from the iMac and the G4, but from my MacBook I can only connect to the Samsung that is plugged into the base station. Although printer sharing is still turned on in the G4, I don't see the Epson printer listed anywhere when I try to add a printer on the MacBook. Also, I used to be able to browse the local network to connect to my other computers from the MacBook, but now they don't show up in the browse window. I can connect to them if I put in the computer's IP address, which is now in a different format (192.xxx.x.xx) rather than 10.0.x.x like it used to be. I only mention these last two points because they might be related to why I can't connect to the printer.
Sorry this is so long and complicated, but if anyone has more networking experience than I do, please help. Thanks!

linbobmiller wrote:
Just bought an HP c310a printer with wireless capability. When I install it on the wireless network it say I need to input a MAC address. I don't think that is necessary, but I can't bypass it. Any suggestions?
Your printer is requesting a mac address?
Is that before or after the printer showed you the available ssid's while running the wireless setup.
Did you run the wireless network test on the printer? and if so did it report any errors?
Which wireless setup are you running?
This may help
http://h20563.www2.hp.com/p/_wireless/printer-setup-help.html#preparing

Connecting to a wireless print server, please help!!!

i have a canon mp500 connected to a network through a wireless printserver and wireless router. the printer works when directly connected to my macbook, but not when connected to the print server. i contacted linksys and they sent a docment on how to set the printer up using it's ip address. still didn't work (the instructions were for 10.1 and 10.2). i have downloaded and installed the current mac os x drivers from the canon website with no luck. please help

I'm no expert, but I was able setup HP printer connected wirelessly to AEBS by using Apple's Printer Setup Utility and Bonjour. I was, however, able to install the HP drivers using the software that came with the printer, but it sounds like you could not do so with Canon?
Anyway, here are Apple's help files for adding an IP printer:
"Connecting to an IP printer
An IP printer is a network printer that uses TCP/IP protocols (such as LPD/LPR, IPP, or Socket or Jet Direct) to communicate with your computer. If the IP printer you want to use is not listed when you print, you can add it to your list of available printers.
To add an IP printer, you need to know its IP address or DNS name. See your network administrator for assistance.
Open the document to print, and choose File > Print.
Choose Add Printer from the Printer pop-up menu, and click IP Printer in the dialog that appears.
Choose the appropriate printing protocol from the Protocol pop-up menu.
Type the IP address or DNS name for the printer in the Address field.
If your printer requires it, type the queue name for your printer in the Queue Name field. If you don't know the queue name, see your network administrator for assistance.
Enter a name and location for the printer, so you can identify it in the Printer pop-up menu.
If the Print Using pop-up menu does not display the name of your printer's model, choose the item appropriate for your printer from the Print Using pop-up menu, and then select your printer in the Model Name list.
Click Add.
Usually, your computer can detect whether a printer has special accessories installed, such as additional paper trays, extra memory, or a duplex unit. If it can't, a dialog appears that lets you specify them. Make sure the settings in that dialog accurately reflect your printer's installed accessories so you can take full advantage of them."

Trouble Connecting Wirelessly to PC Printer

As the subject says, I can't connect to my PC printer. The situation is this:
When the server computer is turned off, the printer is down for the entire network. However, despite the main computer (server) being turned off, I can still access the internet wirelessly.
The problem I'm having is being able to connect to the printer. I have already enabled printer sharing on the PC printer (running Windows XP SP2), but I can't find it anywhere on my MBP. In fact, when I try to add a printer under PRINTER & FAX, the Windows workgroup doesn't appear at all. Does anybody have any suggestions? I figured by this day and age, connecting to a printer on a network wirelessly would be just a few simple clicks of the mouse button...

Let me make sure I understand.
Normally, you print through the server and everything is fine.
You want to be able to print directly to the printer, which is attached to a Windows XP system (How? USB?), so if the server is down, you can continue to print.
In this scenario, is the server normally forwarding the print job to the Windows XP system?
Is this correct?

Is it possible to connect a dot matrix printer to MacBook Air? If yes, please suggest a good application for printing bills in a shop.

Is it possible to connect a dot matrix printer to MacBook Air? I need to print receipts in my textile showroom. Please suggest good applications for printing receipts and saving daily sales records.

Prath33k wrote:
Is it possible to connect a dot matrix printer to MacBook Air?
yes. As long as it is a newer one (means not 15-20 years old). Do you have one? If so, provide the make/model. If you do not have one, which ones are you looking to purchase?

How do you connect iPad to canon printer

How do you connect a canon wireless printer up to a iPad 2nd generation?

Read this to see if your printer model supports Airprint: http://support.apple.com/kb/ht4356
If your printer is not Airprint capable you may need an App to print, for example PrintCentral, etc.

Officejet 6600 All But One Laptop Can Connect To Wireless Network Printer

One windows and 2 macs can connect to the wireless printer over the newtwork just fine but one (Windows 7) will not. HP Print and Scan Doctor can discover the printer from that laptop as "visible" but repeatedly says " need to install full software" which I've done, and after, it runs install wizzard reports, the IP address I've entered is wrong, which it's not. Firewalls are off. I've un and re installed, tried windows add device which can't connect either. I've had this problem before with this laptop but just can't remember how I fixed it. I remember getting to a screen that offered the option of installing over a nework or wireless directly to the printer and over the network fixed it, but I can't remember how I got there. Any ideas as I'm at wits end. Thanks

Welcome to the forums @Davidchicago ,
I read through your post about the installation troubles you are having with one of your Windows 7 computers and your Officejet 6600. I am here to let you know what my suggestion is for you!
There could be a program blocking the installation and causing the problem. I'd recommend a Clean Boot, restarting your PC, disabling your firewall and running through the installation again.
Hopefully that will get you through the install. Let me know the results!
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Connecting ipad2 to my printer

Similar Messages

Maybe you are looking for