Connecting iPads to TVs and projectors?
Hello.
Is it easy connect to Apple iPads (Mini mainly) to TVs (CRT to HD) and projectors like with computers (e.g., MacBook Pros (2008 [10.5.8] and 2012 [10.8.4] models))? Bascially, a portable player.
Thank you in advance.
deggie wrote:
I don't believe the iPad will be able to output to composit or S-Video.
Have you checked the manual?
Do you already have the projector? What make/model is it? Have you checked with the manufacturer to see if it is compatible with the iPad?
No, but it's not recent. It's somewhat old like maybe a decade old? There are no HDMI for sure. It's VGA, composite, S-Video, regular audio, etc.
Similar Messages
-
Connecting iPad 2 to a projector
I recently purchased an iPad 2 to use in the classroom with a projector. I am using the VGA adapter sold by apple with a standard VGA male to male cable to make a connection to a wall plate. I am getting a signal but it drops out periodically and then it comes back. It is not a consistent duration or frequency. What I was wondering is is there a maximum distance using standard VGA that the iPad is able to push its signal.
I did check to see if the iPad were connected directly to the projector (which is not an option for normal operation) and it works fine. When I connect a computer to the wall plate there is no signal interruption so it doesnt see to be a problem with the wiring in the wall.
HELPIt is my understanding that the dgital adapter will give you full video mirroring over HDMI from the iPad 2, although there are some reported models of TVs and projectors that have issues, but that analog signaling, such as VGA, is limited to apps specifically written to provide access to that type of video connection.
-
Can I connect the following?
- 4k TV via HDMI
- 4k TV via Mini DisplayPort with an HDMI adapter
- DVI monitor with 2560x1440 resolutionI saw this page before but I am not 100 % sure if I interprete the statements correctly. For example, it is stated that "Two HDMI (HD or 4K) devices" are supported. When reading only this, it seems that the configuration in my question is not supported. However, they also wrote:
"Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adapter such as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all."
Does this mean that I can also attach additional 4k HDMI TVs (and not just DVI displays)? -
When I connect ipad to computer, itunes does not show ipad on left side of page. winzip appears and says need pro version. i have apple id, etc. and have dowmloaded music to ipad previously. What do I need to do to get it to recognize ipad?
Did you set the iPad up on a Mac? I set mine up on windows and my Mac wouldn't read it so I started over. Just a thought though, not sure if that's your problem.
-
Connected ipad to computer with usb and downloaded 2 apps that aren't showing up on my ipad. Says they are downloaded on itunes, but I don't see anything on my ipad. Tried downloading AGAIN and it says the same thing. Downloaded but don't see them on the ipad. I have synced it several times. Am I missing something?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
Trying to restore iPad2 but itunes just says connecting ipad software server and does nothing
ipad is disabled and says to connect to itunes but when i connect in DFU mode it just sits there
Doublechecking. In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server -
How do connect iPad wireless to a projector for use in classroom?
I want to be able to utilize my iPad in the classroom as I would an airtablet. Is there a way to do this?
Probably the simplest way, if you want to remain wireless (not be cabled to the projector) is to buy an AppleTV and use Airplay to mirror the iPad to the projector that way. AppleTVs have HDMI outputs, so if your projector has that connection, you just need an HDMI cable - otherwise, you will probably need an HDMI-VGA adaptor.
Matt -
Connecting iPad to Windows7 and I cannot see see videos or photos on the device using explorer
I have connected iPad3 running iOS 6.1.4 to a PC running Windows 7. I cannot see by using windows explorer any photos or videos on the iPad device.
Also AutoPlay provides me with a message that it has nothing to import. Would someone be able to help. Thank you.If you imported the photos and videos using iTunes, then you cannot see them with Windows Explorer.
-
Connecting iPad 2 to Digital Projector
My son will be giving a presentation in his third grade class showing how to use ToonTastic. I need to know what cable I need to hook up our iPad 2 to the classroom ELMO digital projector. Any advice would be appreciated!
Without knowing what input the Elmo has, I can't be definite, but it would probably be one of these two:
http://store.apple.com/us/product/MC953
http://store.apple.com/us/product/MC552
If the Elmo has only DVI input, you'd need an HDMI to DVI adapter to go with that first item (MC953).
Regards. -
How to connect the iPad to a VGA projector
I read the comments about using the iPad with a VGA projector for presentations, but those were for the original iPad. My association is asking me to present a live demonstration of the new iPad 2. I tested the iPad 2 with the digital connector to HDMI on my TV and that works great. I can move around all the screens on my iPad and even play Angry Birds.
But what about connecting this iPad 2 to a VGA projector? All the earlier comments referred to that process as "very limited" with only a few apps running on it, like Keynote. That won't do for my presentation. Is there a solution or does the new iPad 2 fully support a standard (read old) VGA projector?
Thank you for your replies.
Jean FeuilletIt is my understanding that the dgital adapter will give you full video mirroring over HDMI from the iPad 2, although there are some reported models of TVs and projectors that have issues, but that analog signaling, such as VGA, is limited to apps specifically written to provide access to that type of video connection.
-
Connecting the ipad to a data projector when projector is on the ceiling
I am trying to connect the ipad to a data projector when projector is on the ceiling. I have the VGA cord but it is way to short ...is there another cord to connect the both?
It is my understanding that the dgital adapter will give you full video mirroring over HDMI from the iPad 2, although there are some reported models of TVs and projectors that have issues, but that analog signaling, such as VGA, is limited to apps specifically written to provide access to that type of video connection.
-
how do you unlock ipads if ur forgotten ur password. i have plugged it into my comp and it says cant connect ipad is locked
Try and force the iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: Data will be lost. You may have to repeat the above many times. -
Connecting iPad to a projector
Hi
How can I connect my iPad to a VGA projector to play my presentation?
Thank youHey guys,
If you need to show a web page during your presentations you should give Expedition-The VGA out browser for iPad a try. It lets you show a web browser on the projector screen and can even play HTML5 video on a page on the projector. Also has a laser pointer feature just like keynote.
Here's a video of it in action:
http://www.youtube.com/watch?v=QUn4ryLUZFA
Here's a link to it in the appstore
http://itunes.apple.com/us/app/expedition-the-vga-out-web/id369305234?mt=8 -
Connecting New iPad (3) to vga projector
Hi everyone
Has anyone tried connecting a New iPad (3) to a projector using the vga adaptor?
From what i've read, most projectors have a resolution of around 1028 x 768.
What happens if you connect the New iPad, with it's 2048 x 1536 resolution, to a vga projector with a lower resolution? (using the Apple vga connector).
I would like to show keynote app presentations on a vga projector, but i'm worried that if I use the New iPad (3) that some of the image will be missing?
Help?
ThanksDoes anyone know why the display on the LCD projector is not 1028x768. I have 2 black bands on each side. This is output from iPad3 using the VGA adaptor. It was working fine a day earlier, with 1028.x768. I used another application called Web Presenter and that works fine, with the option to choose external display setting.
-
HT201335 Can I connect an Ipad wirelessly to a projector?
Can I connect an Ipad wirelessly to a projector?
Epson has a bit of software called EasyMP for PC's or Macs - this can be used wired USB / VGA / HDMI - or used wirelessly from either device without too much trouble.
If you give the Projector an IP Address in its own "Settings" Menu and then connect wirelessly using Epson's iProjection App for the iPad it should work.
T.
Maybe you are looking for
-
Hi folks, I have copied MSSBIZVIEW and MSSVIEW_SUB to the customer namespace and now I am wondering how to enable substitution in the MSS role on portal? please help. Thanks & Regards Sahil Kohli
-
Why can't I return to a previous story on Yahoo News and have to log out?
When I am on a news story on Yahoo I often find I cannot return to the previous one and the only way I can is to log out and log back in again..this is one reason I keep deleting Firefox ..it is a real irritation. Please advise Thank you john pulling
-
How to instal adobe flash player for nokia n97 min...
I got a nokia N97 and i what to instaal adobe flash player 9 so i can whatch clips on some sites pls anyone HElP thanks in advance.!!!!!
-
Getting master graphics to be on the bottom layer.
Hi all, I have a master page with a footer that has a shadow coming of the top. On my pages, this shadow is covering up the graphics. I want my page graphics on top, but I can't seem to figure it out, even though I've put the master graphics on the
-
IBP with ERP systems overview document
This document gives professors and overview of the IBP textbook and syllabus options.