Connecting iPhone restarts my computer

I bought an iPhone 3GS six days ago and synced it with my computer immediately, everything worked fine until today. I connected the iPhone and my computer flashed a blue screen with writing on it and then restarted. I did not see what was written on the blue screen because it was only visible for a moment. Thinking it may have been a problem with itunes i have removed itunes and any apple software on my computer (except safari). I then reconnected my iPhone and nothing happened. I then went to proceeded to download itunes again, halfway through the install the blue screen flashed and the computer restarted. I then re-removed itunes etc and tried connecting again only to find the computer restarts even though itunes isnt installed.
So in sumary; when I connect iPhone to the computer, it restarts. What should i do?

Have any photos in the camera roll on your phone?
Running any logitech camera software, i.e. a webcam?
If so, that's most likely your problem. There is a know conflict between logitech's software and the iphone. You can see if there are updated drivers available or try & disable the logitech cam(if you have one), & see if that fixes the problem.

Similar Messages

  • Connecting Iphone 5 to computer and Iphone

    Recently upgraded to Iphone 5.  Computer (HP Windows 7-64bit) does not even recognize as portable device and is not recognized by Itunes.
    Have litterally done everything listed on support:   Deleted I tunes and all software and re installed,  went under services to make sure softwared was running, have restarted phone and computer multiple times.   I have a new I pad that uses same cord and is working just fine and is recognized instantly.  Even triged daughters I phone 4 and works fine.  Tried different cord and still nothing!

    j0lie92 wrote:
    Connecting IPhone 5 to MacBook i get this message: The iPhone “iPhone” cannot be used because it requires iTunes version 11.1 or later. I've downloaded iTunes 4 times and restared my computer and it's not updating nor acknowledging my iPhone
    Open iTunes .
    Go to iTunes menu iTunes > About iTunes.
    What version is it?
    Go to Apple menu > About this Mac.
    What is the OS version?

  • "Please connect iPhone to a computer running a 32-bit version of Windows XP

    Anyone! Please, anyone! I just got an iPhone and plugged it in to my existing iTunes and it required for me to update to a new version of iTunes in which I did, which is now 7.4.3.1. When I plug the iPhone in, an error message displays and it says "Please connect iPhone to a conputer running a 32-bit version of Windows XP (SP2) or Windows Vista. I have a Windows Vista and re-checked compatability it everything is fine. I've even re-installed iTunes,and restarted my computer but no success! I still keep getting the same error message. Oh, by the way, I've tried all USB ports as well. =(

    It isn't compatible with the 64 bit version of vista. If you search the threads you might find some workarounds that might work. I believe the installer doesn't put the files in the correct directory.
    Good luck...

  • How to connect iphone to new computer without having the old one?  The hard drive on my macbook broke, so I had to install a system from scratch. I now cannot reconnect my iPhone. How can I set the new computer without loosing my data on the iPhone?

    Recently the hard drive on my mac book was damaged beyond repair and I had to reinstall the OS.
    MY iPhone still has all its original dta.
    How can I connect my iPhone to my computer (virtually new) without loosing the data I have on my iPhone?
    Obviously I cannot recover any of the old itunes files.
    Thanks,

    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
    - deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • HT201269 How to connect Iphone 4 to computer

    How to connect Iphone 4 to computer

    Plug one end of the cable into your computer and the other into your iphone

  • Connecting iphone 5 to computer

    i cant get my iphone 5 to connect to my computer or show up in itunes please help

    j0lie92 wrote:
    Connecting IPhone 5 to MacBook i get this message: The iPhone “iPhone” cannot be used because it requires iTunes version 11.1 or later. I've downloaded iTunes 4 times and restared my computer and it's not updating nor acknowledging my iPhone
    Open iTunes .
    Go to iTunes menu iTunes > About iTunes.
    What version is it?
    Go to Apple menu > About this Mac.
    What is the OS version?

  • Connect IPHONE to the Computer so I can navigate in my computer instead of

    It is very difficult to navigate though the iphone. Is there anyway that I can connect the iphone to my computer so I can navigate using my laptop but using iphone internet conexition

    Leslie_Macias wrote:
    It is very difficult to navigate though the iphone. Is there anyway that I can connect the iphone to my computer so I can navigate using my laptop but using iphone internet conexition
    Difficult?

  • Connecting IPhone 3G to Computer

    In most cases, hardware that you connect to your computer is supposed to be in the off position, then you plug the USB into the computer, then the hardware, and THEN you turn it on after connected with the computer.
    For instance: My cameras must be off; my Garmin must be off, etc..
    So, should the iPhone be turned off or on when you connect it to the computer via the USB cable, and then be turned on? Or does it matter whether it is off or on? The instruction book does not answer this question.
    Thank you.

    Thanks, Roaminggnome. Apprecitate it.

  • Connecting Iphone crashes my computer, any help?

    Every time I connect my Iphone it crashes my laptop and forces a restart through the blue error screen, the computer loads the immediatly crashes again.
    Its only recently started doing this, any help?

    Did you take some photos with your iPhone?
    Does your PC use a Logitech Camera or Logitech Camera Software?
    If so try updating the software
    What to do when Windows XP or Vista computer displays a blue screen error message when syncing the iPhone
    http://support.apple.com/kb/TS1502

  • Error when connecting Iphone 4 to computer

    When i connect my iphone 4 to the itunes, it says: "This iphone cannot be used because the required software is not installed. Run the itunes installer to remove itunes, then install itunes again."... i already did this once it did not work. can somebody help, i cannot download ios5 because of this.

    Hello, helplessandconfused. 
    Thank you for visiting Apple Support Communities. 
    When syncing your device for the first time, iTunes will prompt you to either setup as a new device.  Make sure to select the option to setup as new otherwise your data will be overridden.  You will also need to transfer purchases as outlined in the second article below.  To import your photos to your computer, see the last article.  I would recommend following the steps for importing photos first. 
    Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
    http://support.apple.com/kb/ht5262
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    http://support.apple.com/kb/ht1848
    iOS: Importing personal photos and videos from iOS devices to your computer
    http://support.apple.com/kb/ht4083
    Cheers,
    Jason H. 

  • HT4623 unable to connect iphone 5 to computer why?

    why am i not able to sync my iphone 5 to my pc

    Very vague.
    What happens when you try?
    Any info at all?

  • When connecting iphone to computer iphoto always loads

    When connecting iphone to my computer iphotos always loads on top. how do I stop iphotos from loading

    When there are photos in your iPhone's Camera Roll, your iPhone is also detected as a digital camera when connected to your computer. Although photos in your iPhone's Camera Roll are included with your iPhone's backup, which is updated by iTunes as the first step during the iTunes sync process, photos in your iPhone's Camera Roll should be imported by your computer as with any other digital camera. Not a good idea to depend on your iPhone's backup alone for these photos, and deleting the photos from the Camera Roll after the import process is complete will improve your iPhone's backup time. If you want any of the imported photos available on your iPhone for viewing, you can add the photos to an existing iPhoto album already selected to be transferred to your iPhone followed by a sync, or create a new iPhone album for the recently imported photos, select the new iPhoto album under the Photos tab for your iPhone sync preferences followed by a sync.
    http://support.apple.com/kb/HT3603

  • How can I transfer Voice Memos from my iPhone to my computer?

    Dear Iphone users,
    I have a very nice Iphone. I know how to transfer the pictures on my Iphone to my computer but I do not know how to transfer my "audios" (from the "dictaphone" function in French). How can I do that ?
    Thank you very much

    iTunes automatically syncs voice memos to your iTunes library when you connect iPhone to your computer. This lets you listen to voice memos on your computer and provides a backup if you delete them from iPhone.
    Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos application until you delete them. If you delete a voice memo on iPhone, it isn’t deleted from the Voice Memos playlist in iTunes. However, if you delete a voice memo from iTunes, it is deleted from iPhone the next time you sync with iTunes.
    You can sync the iTunes Voice Memos playlist to the iPod application on iPhone using the Music pane in iTunes.
    Sync the Voice Memos playlist to iPhone:
    1. Connect iPhone to your computer.
    2. In iTunes, select iPhone in the sidebar.
    3. Select the Music tab.
    4. Select the “Include voice memos” checkbox and click Apply.

  • How to copyphotos from iPhone 4S to computer

    How do I copy or download photos from my iPhone 4S to my computer?

    you can do this with iPhoto, for how to do it, you can go to Apple website: http://support.apple.com/kb/ph2328
    you can also have this done with iTunes. Install the latest iTunes and connect iPhone to the computer. Then, you'll see your device's icon on the "Computer (disk)" list , click it, you can see all your pictures on the iPhone and import or copy it to the computer.

  • My MacBook Pro that is running on 10.6.8 won't update software so that iTunes connects to my iphone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.

    My MacBook Pro that is running on Mac OS X 10.6.8 won't update software that I need in order to download the newest iTunes software to connect to my iPhone 6. Problem is that when I go to update, it restarts the computer but never updates any of the software.

    In addition to Stedman's spot-on reply --
    When you buy an upgrade disk, all updates in that OS can be found on Software Update.
    For instance, I bought Snow Leopard at 10.6.
    All other updates have been free and downloadable.  So I'm not a 10.6.7.
    10.4 (Tiger) went to 10.4.11.
    10.5 (Leopard) went to 1.5.8
    10.6(Snow Leopard) is currently at 10.6.7.
    Now, when Lion come out (the next major upgrade of OSX), I will have to pay to go to 10.7.
    After that, updates are free til 10.8 comes out.

Maybe you are looking for

  • Can we design analog to digital signal conversion block diagram (ADC) in labview

    hi every one,i've doubt i.e can we convert function generator output (i.e analog signals) to digital signal in labview......can anyone help me how to create ADC circuit that means ADC Block Diagram in LABVIEW.....please give me solutions for my probl

  • Routing-Sequences Error in co11n

    Dear all, Can any one please share the screen shots how to process the sequences in routing I have tried by using help portal but i dint get any differences on that. While confirming in co11n,that particular sequences also not get displayed in sequen

  • Form Guide

    I am trying to create a form guide.  I keep getting errors as follows: As an example, this is the script part: ReturnAddress.para.lineHeight = "12pt"; This is the error : Warning: Unsupported XFA mehod/property "para: Here's another one wih the same

  • Cannot import contacts in CSV format

    hi all, When i updated my firmware on nokia e 71 i saved my messages to my pc using nokia messaging center as csv format.After upgradation when i tried to take it back the import option was disabled. I can do only export or what ?. Can anyone help me

  • CS6 - "error compiling movie - Disk Full"

    This is the message I am getting from both Premiere and Media Encoder cs6 when I try to export my Premiere project.  It is 1080p 59.94fps.  This disk I am exporting to is FAR from full.  I am running Mac OS X 10.7.4 - not sure how else I can export w