Connecting ipod 2nd gen to auxiliary input in car

Just got a new car - it has an auxiliary input. I noticed I can purchase two different connectors for my ipod - 1) cord with 3.5 mm connector on both ends 2) cord with 3.5 mm connector on one end, ipod dock connector on the other end.
Which one is better for listening to the ipod?
Thanks, Jessica

I'd probably say the one with the dock connector because it's most likely integrated into the car stereo, meaning it should keep you ipod charged as well as allow you to go through your songs on the head unit of the car. With the 3.5mm connector your car won't keep it charged and yu'll have to use the actual ipod to browse through songs.

Similar Messages

  • Running os xp.cable connect ipod 2nd gen and box appears that asks that a camera is installed. i click no and i get no reconicition of a device in itunes. this is a recent happening. i have had no sync problems for almost 2 years. i cannot sync iphone too

    have recently experienced sync issues with iphone 3gs,ipad2 and 2nd gen itouch.When i cable connect to xp pc i get a camera connected box. i opt out of this and itunes does not reconize my devices. Is ther something in my device manager missing?

    Try this:
    iOS: Disabling digital camera notification in Windows
    Also check is AMDS is installed and active:
    iPhone and iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • Every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

    every app on my ipod (2nd gen) which requires wifi connection doesn't work although the wifi mark is on. i did try restarting my ipod, resetting network setting, disconnect from wifi and reconnected it but non of them worked.

    This may sound silly but try your date a time setting my ipod had the same problem and i had even checked the the date and time went all the way to the apple store for help and the genius guy just rest the date and time and it worked just fine.

  • Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work.  Any ideas without needing to reset the ipod?

    Hi, my ipod (2nd gen) won't connect to the internet via Safari or through apps but my email does work.  Any ideas without needing to reset the ipod?

    - Have you tried when connected to other networks?  Maybe the router is blocking the ports used by Safari and the other apps.
    - What kind of network are you using? a personel or bussines?

  • Ipod 2nd gen not connecting to bluetooth

    Hi I have an ipod 2nd gen that i would like to pair with my Windows 7 laptop but for some reason it wont....Is it due to wrong specifications o nthe ipod?

    iOS: Device not recognized in iTunes for Mac OS X
    - New cable and different USB port. Different conductors/contacts are used for charging and data
    - Try on another computer to help determine if computer or iPod problem

  • HT1477 When i disconnect my iPod 2nd Gen from my laptop, its display turns off and working freezes. Please help me.

    When i disconnect my iPod 2nd Gen from my laptop, its display goes off and working freezes. Please help me.

    The computer freezes?  There may be something wrong with the USB port.  If the laptop has more than one port, does this happen on any port?  If you are disconnecting the shuffle cable from the computer, does it make any difference if you disconnect the shuffle at the other end of the cable first, then disconnect the cable from computer?  Or if you currently disconnect the shuffle from cable first, try it the other way.
    You may be able to work around this problem, if you get a self-powered USB hub.  Something like this one
    http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
    There are many choices, but be sure to get one that has its own power supply.  You can leave the shuffle cable connected to the hub, and connect the shuffle to the hub, instead of directly to the computer.  This may provide a "buffer" for whatever is causing your laptop to shut off when the shuffle is disconnected.  Since the hub has its own power supply, it will not rely on the computer for power to re-charge the battery.

  • I have an ipod 2nd gen that was synced to a computer that i no longer have access to..now when i plug it in to my current computer itunes wants to delete all my songs!!!!!

    I have a ipod 2nd gen that was synced to a computer that i no longer have access to...now when i plug it in to my new computer it shows the ipod but wants to erase all my music on the ipod in order to use itunes!!!

    I think that's the way it's supposed to work. When you connect to a computer that has iTunes, but is different from the computer you are normally synced to, you are asked if you want to sync to the current computer. If you say yes, it will replace the content of your iPod with what is designated to sync in the iTunes. If you say no, it will leave your content alone, but you won't be able to load any new songs, but you can still use it in disk mode as a storage device.
    The exception is that you can transfer your iTunes store purchases to the new computer from the iPod, but I haven't done that myself. I'm not sure, but I don't think you can transfer non-store tracks, like those you burn from your own CDs. You have to copy those manually and then sync them onto the iPod.
    Anyway, that's how it works with a 6th gen and the latest iTunes. Not sure if there is a limitation with 2nd gen.

  • IPod 2nd gen with Windows

    I upgraded iTunes to 7.4.3.1 on my Windows computer and it is giving me this message when I connect my 2nd gen shuffle. It didn't give me this message before I upgraded.
    "The iPod "Share" cannot be used with iTunes because it is not formatted properly.
    To format this iPod so that it can be used with iTunes, go to the Summary tab in iPod preferences and click Restore."
    I hit restore. iTunes appears to restore the shuffle but then gives me the same message.
    I can reformat the same shuffle at home on my iMac without any problems. Like I said, this only started after upgrading to the lastest version of iTunes

    I have a very similar problem. I switched to a new (Windows XP) computer, connected my 2G Shuffle and get the message "The iPod 'Enormous Cave' cannot be used with iTunes because it is not formatted properly.
    Restoring from within iTunes 7.4.2.4 doesn't work. I downloaded the reset utility, but it can't locate the iPod.
    I can still listen to the iPod, but the podcasts are getting stale.

  • I have an iPod 2nd gen. that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

    I have an iPod 2nd gen that keeps having an error code 9 when trying to restore. Any ideas on how to fix?

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • IPod 2nd gen not showing in iTunes

    My iPod 2nd gen hadn't been used for a while, and the battery was dead.  I charged it, and connected it to my Mac Mini (1st gen).  It is now continuously blinking orange but is not showing up as a device in iTunes (v. 10.6.3).  According to the manual, the blinking means it's syncing in iTunes, or the iPod shuffle is enabled for disk use.  I don't know what the latter means. 
    I'm using the original dock, but it is connected to a USB port on my external hard drive which is connected to the mini, since the 1st gen Mini doesn't have enough USB ports.  (That shouldn't be a problem though, because my 3rd gen iPod nano shows up in iTunes using that same port.) 
    I've tried twice to get it to show up in iTunes.  The first time it was already connected to the USB port but wasn't showing any lights, and it didn't show up in iTunes.  I turned the shuffle off, waited 5 seconds, and turned it on again.  Still didn't show up, so I manually removed it from the dock and unplugged the dock. Then I plugged the dock in again, and put the ipod firmly into the dock.  Then the orange blinking lights started, but it didn't show up in iTunes that time either.  I did get an error message that it had not been put away properly.
    Since it wasn't showing up anywhere that I could find (iTunes, Finder, Desktop) to eject it, I shut down the computer, removed the iPod from the dock, restarted the computer, opened iTunes and then put the iPod in the dock. It still doesn't show up as a device in the left-side sidebar of iTunes where it usually does, right after Library, Store, and before Playlist).  I can't put it away properly now because I can't find it to eject it. It's still blinking orange.  (The right sidebar only has a message about Genius and learning to use it).
    I've read previous questions similar to this, but nothing suggested there has worked.  If anyone has suggestions/idea, it would be greatly appreciated.
    My O.S. is 10.5.8.
    Thanks,
    Esther

    Thanks for providing a good amount of detail. 
    Enable disk use is a setting (checkbox) on the shuffle's Settings tab in iTunes.  It allows you to see the iPod's "disk" on the Desktop continously while it is connected, so that you can copy files to it using Finder (like it was a USB flash drive).  The light blinks as a warning to eject before disconnecting, because the iPod's disk is mounted.  If that checkbox is NOT checked, iTunes only mounts the iPod's disk when syncing, so the light does not blink most of the time (and you can disconnect it without ejecting).
    Although you have confirmed that the USB port on the external drive (Is it an OWC miniStack?), which is the same as a powered USB hub, works with another iPod, you may want to disconnect something from a direct USB port temporarily.  Connect the shuffles docking cable there, to confirm it's not the port causing the problem.
    If you connect it and run Disk Utility instead of iTunes, does it appear in the Disk Utility sidebar?
    Since this is a 2nd gen shuffle, and you use a Mac, you can try using the iPod Reset Utility
    http://support.apple.com/kb/ht1238

  • HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

    GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

    Please don't shout.
    Has the unit EVER been jailbroke?  Has it EVER been dropped?  Did it EVER get excessively wet?  Did you EVER load a pirated developer's version of the IOS?
    If "No" to all the above, first try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

  • I have an iPod 2nd gen, trying to get an update so I can add facebook, but it will not update. Current ver is 4.2.1 How do I get it to update?

    I have an iPod 2nd gen . I have been trying to get an update to the software, but it will not update. Current version is 4.2.1 Trying to update it so I can use facebook on it, but with this version facebook will not work. Can someone help  with this please.

    Ipod touch 2 g does not go above ios 4.2.1 and the facebook update needs 4.3 , so there is no way to update the app.

  • IPod (2nd Gen) syncing with iTunes 11

    On iTunes 11, the songs on my iPod (2nd Gen) playlist are greyed out and I would like to be able to add and remove them. I have read through the discussions and they all point to changing things under the summary button, of which I don't seem to have one.  When I click on my device on the sidebar, the only tab underneath it is Genius.  The only tabs on top are Settings and On This iPod (of which all the songs are greyed out) and Autofill is on. There is no option under Settings to turn Autofill off. I've read how I need to change my settings from Autofill to Manual but can't seem to locate a 'Summary' button anywhere to do so.  Please help!

    I am having this same problem. Did you ever resolve the issue and how? I feel really goofy not being able to figure this thing out. Crazy.

  • Connect ipod classic (gen 4) to a TV

    Tried connecting ipod classic (gen 4) to Panasonic flatscreen TV. I get only sound. Same with a friends ipod. Followed instructions using AV cables.
    Been looking at this for a day now.
    Anyone have a similar problem or know a solution?
    Regards. T

    Do you have a 4th gen iPod or an iPod Classic? They're not the same and the instructions will be different.
    If you need help identifying your iPod, try here:
    http://docs.info.apple.com/article.html?artnum=61688
    Then, if you don't have a Classic, you might want to post in the correct forum.
    Best of luck.

  • Ok I want to update my iPod 2nd gen iOS 4.3 is there any way to do so

    Ok I want to update my iPod 2nd gen to iOS 4.3 is there any way to do so

    Well that's kind of ******** could I go to apple and have them put a new inside in it that would hold the newer firmware

Maybe you are looking for

  • Unit conversion in the sales order

    Hi All, We have got a typical requirement from the user where they need unit conversion at sales order creation level. The scenario goes as below. Initially the order quantity will be enetered in terms of pieces and the price will be determined accor

  • Menu Item Text translation

    Hi all, I have to translate the menu items text of a program. I tried in SE41 and in SE80 "Go To --> Translation" but the item "Transaltion" is not activated. How can I translate the menu items text? Thanks in advance. Flavio

  • Items In safari reading list get duplicated

    For some strange reason any items that I add to my reading list in safari get duplicated, about 5 times. Same thing happens to my bookmarks that are outside the "bookmarks bar" and "bookmarks menu" folders. I have an ipad, an iphone and one computer

  • Gourp Policy software installation suddenly stopped working

    My GPO'S were all in wonderful working order, I just imaged 30+ machines using the same policies with no problem.  Now I have to deploy more machines but the GPO'S are not applying.  I ran gpresult on one of the computers in question and get the mess

  • DUMP on KP97

    hie i'm experiencing a system dump when i'm trying to copy this year's transaction data in cost centers to next year.. after i input ,y values when i click the execute button it gives me a dump!!