Connecting iPod launches iTunes and Windows Explorer

Just curious. Is there any way to keep my iPod from launching Windows Explorer via Autoplay when connecting it to my PC via USB? Currently it opens an instance of Windows Explorer showing the contents of the iPod as a storage device and then about 30 seconds later launches iTunes as well. I'd like a succesful connection to launch only iTunes - and without the delay if possible.
Thanks for your help!
iPod Mini 4GB Windows XP

Disconnect the printer, use a rear port on your computer and try it again.

Similar Messages

Ipod freezes itunes and windows explorer

I have been trying to connect a new 30G Ipod to my Vista computer and everytime I do both Itunes and Windows Explorer freeze. Neither recognize my ipod. I tried to change the drive designation but couldn't because of Explorer freezing. I did run the same Ipod on my XP and everything worked fine so it is a problem with my Vista computer or with the ITunes (7.2.035) software. Any ideas?

Disconnect the printer, use a rear port on your computer and try it again.

Ipod not recoginized in itunes and windows explorer but is charging

ok here's the deal, like it says in the subject line, when I hook it to my pc it charges but isn't recognized by itunes or windows explorer. I've already reset the ipod (by holding down center and menu button.) and I've already uninstalled and reinstalled itunes. Just got done checking services. The ipod service was set to manual, so I restarted it and changed it to automatic. Then I reset the ipod and plugged it back in, still no good?!?!?!?
Any ideas, besides something super drastic. Thanks in advance
Forgot to mention that I have a iPod Classic.

Hi open.mike.nite,
Thanks for using Apple Support Communities. This article has steps you can take if your iPod classic isn't recognized in iTunes or My Computer:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Cheers,
- Ari

Classic 160GB, Itunes and Windows Explorer all disagree on how much space is on the Ipod

Hi,
I restored and resynced my Ipod Classic 160GB (about 2.5-3 years old) to see if it would help a problem I was having when plugging it into my stereo receiver via USB (the receiver was only recognizing it for four or five songs, then losing the connection).
It took a long time to restore the Ipod, due to the size of the collection and the number of MP3s that I had it convert to AACs.
The Ipod, which had had the exact same songs on it before with 2.7 GB left over, now claimed to have only 53 MB of empty space. Looking at the drive in Windows Explorer, it had 2.6 GB. In Itunes, the Ipod appeared to be 6 GB OVER its capacity.
So I took a chance and defragged and optimized the drive. It made it better, but not fixed:
Now, the Ipod claims that it has 2.3 GB of empty space remaining; looking at it as a drive in Windows, it appears to have 2.6 GB remaining; Itunes, however, claims that the Ipod is totally full (2.5 GB OVER CAPACITY), so it won't add the final 3,000 songs or so to my Ipod.
I know that this all fit on the Ipod fine before the restore - with the same songs checked in my library, I had 2.7 GB left over.
Also, now Itunes reads the Ipod and says that it has 12.6 GB (!!!) of "Other." I have no video, no photos, no contacts on the Ipod or in the library - nothing other than music and album cover images. There's no way that I'd have 12 gigs that I didn't know about.
Should I assume that the drive is dying? Is there anything that I can do to make this better?
Thanks for your help.

Also, does an Ipod running on Windows need the "metadata_never_index" file? I don't remember this being on the pod until recently, and from what I've read it's a file for connection to Macs.

Itunes and Windows Explorer crash when ipod attached

Hi, for some reason my ipod has started to crash both my laptop and my home desktop computer whenever i attach it. It shows up in Windows Explorer but if i click on the icon it crashes the window. Similarly, Itunes opens if i attach my ipod but then freezes straight away, but then if i take out my ipod it starts to work fine again. Im starting to think that seeing as this is happening on more than one computer it might be a fault with the ipod. Any ideas?!
O and it's a 120gb ipod classic and im using the most up to date itunes on vista.
Thanks alot

Im starting to think that seeing as this is happening on more than one computer it might be a fault with the ipod.
I'm with you on that. By any chance do you have a spare USB cable (or have access to a different one)? If so, try experimenting with connecting using the other cable. Do you still get the freeze with that?

Connect Ipod to Mac and Windows

I started to connect my Ipod to my Windows computer. Now I bought an Imac. I want to connect my Ipod to my mac without loose all the songs I have loaded to my Ipod from my Windows pc.
Is that possible ?
Thanks in advance for help.
Cheers from Copenhagen - Frank

Strictly speaking using a Windows formatted iPod on a Mac isn't supported however many people use one without any issue. iTunes will allow you to use an iPod formatted for Windows on a Mac but Apple currently only supports using the iPod shuffle in FAT32 format on Mac. This means you will have to make sure that any time there is a software update available you do this on a PC. If you updated the software while the iPod was connected to the Mac you would end up erasing and formatting the iPod for Mac.
If you only intend using the iPod on the Mac from now on, you could transfer your songs to the computer and then Restore the iPod on your Mac. Restoring will erase and reformat the hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions and it should connect to iTunes and give you a prompt to automatically update your library onto the fresh installation: Restoring iPod to Factory Settings with iTunes 7
If you have any iTMS purchases the transfer of purchased content from the iPod to authorised computers has been introduced with iTunes 7 A paragraph on it has been added to this article: Transfer iTunes Store purchases using iPod
The transfer of non iTMS content is designed by default to be one way from iTunes to iPod. However there's a manual method of copying songs from your iPod to your Mac at this link: Two-way Street: Moving Music Off the iPod
If you prefer something more automated there are a number of third party utilities that you can use to retrieve music files and playlists from your iPod, this is just a selection. I use Senuti but have a look at the web pages and documentation for the others as well, they are generally quite straightforward. You can read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
Senuti Mac Only
iPodRip Mac Only
PodWorks Mac Only
PodView Mac Only
iPodAccess Mac & Windows
YamiPod Mac & Windows
PodUtil Mac & Windows
iPodCopy Mac & Windows

Why cannot I see my music on my iPod when connected to the pc, using Windows explorer

I am having problems with seeing my iPod Classic in my Windows Explorer.... when connecting using the correct leads I can only see the non-essential directoris, my music is hidden and is shown as F1, F2, F3,etc......
Please help as I wish to transfer the music to my netbook...
Thanks

Those F1, F2, etc., folders are the ones containing your actual music. If you copy these over to your Desktop and then into iTunes most of your track tags should still be with associated with the correct tracks in these folders. Some may not.
B-rock

My Ipod 7th gen is not being recognized by itunes and Windows 8.1.

Hello. My ipod 7th gen is not being recognized by itunes and Windows 8.1. When I connect my ipod to my computer, itunes will open automatically and a message bar below will appear:
I have followed all the instruction in the support and itunes still unable to deted my ipod. The funny thing is, if i uninstall itunes, Windows 8.1. will detect my ipod but when itunes is installed, both itunes and windows 8.1. cannot detect my ipod. Thank you in advance for all your help.

the message box says like this:
An ipod has been detected but could not be identified properly. Please disconnect and reconnect ipod, then try again. If the problem persists, unisntall itunes then install itunes again.

Problem with syncing iPod ... Itunes and windows show errors... itunes 7...

hey guys... since I upgraded to itunes7 my ipod (4th gen click wheel) doesnt sync poperly! it all began when I was syncing the ipod and my screen just froze a few secs after connecing the ipod! I had to restart the computer and reset my ipod... from that time had alot of trouble!
first the screen froze immediately when I connected my ipod with the pc and later when i had formatted it with windows several times and resetted it a million times with itunes7, itunes and windows show errors (error (-124) while syncing and everything stops! I've just spent nearly two nights on that and really hope that my ipod didn't break just because of itunes7! to stay in proper english and not get that angry in letters that I am in mind--- please so help me... my ipod is everything and im a music junkey! by the way... itunes itself works perfectly... if i not sync! how peculiar that getting back to itunes6 is impossible...i tried it... does it hav a spec reason, hah!
IBM, Pentium3 (666MHZ), FW(desire to fire), Ipod Click Wheel Windows XP 30cm

I tried formatting the ipod with windows! in the end of it windows says that it was not able to format the drive properly. then I click ok, open itunes, restore the ipod, try to sync again and have the problem that after a while the whole thing freezes... no more errors....just from the moment i disconnect the ipod manually from the cable, everything gets back to normal life again! I do not know what to do! do you guys think, my computer is too old or maybe my ipod's broke???
I'm despairing people...never had problems like that until itunes7! I tried as well to close all the other working programs with the task manager... doesn't change it!
Thx for the help!
Christopher
IBM, Pentium3, FW(desire to fire?)...doesn't really matter Windows XP

Computer says iPod is there, but iTunes and Windows won't recognize it

I've had a 60GB ipod photo for about 4 years and it has served me well. This morning the iPod froze in the middle of a song. I hit reset, and it came back blank - all the files were gone. When I got to work and hooked it up to my computer, iTunes and Windows can't recognize it, but I can find it in device manager - which means I couldn't do restore.
I hit reset a few more times, changed USB ports and, somewhat miraculously, the iPod came back, complete with all files. On the way home from work it happened again and I haven't been so lucky.
I forced it into disk mode and iTunes recognized it, but told me it was corrupt. I also received a computer sound card error - my sound card was busy, and an error stating that audio/video playback could be limited. I tried restore, but I received the unknown error. I'm using the latest version of iTunes and I'm all out of ideas.
Any suggestions or should I put this iPod to rest and save up to buy a new one?
Thanks

The most likely problem is that the hard drive in the iPod is becoming unreliable. It may be experiencing sticktion, which is friction that makes the spinning platter stick and the motor cannot get it spinning. The iPod is regularly spinning the hard drive up, to cache songs into memory, and then spinning it down, to save power. If the drive was not able to spin up when commanded (in the middle of a song), the iPod would seem to lock up. Later, bumping the iPod may make the hard drive spin again, so it seems to work again, at least for a while.
If this the the problem, the only way to fix it would be to replace the hard drive inside.
You might try reformatting the iPod using Windows, if you can get it to appear in a My Computer or Windows Explorer window. Use a full format instead of a quick format. If that process competes successfully, run iTunes and try using Restore again to install and initialize the iPod's software.
If formatting does not compete successfully, it may be time for that new iPod.
You can do some experimenting on the old iPod, if you're into such things. I have successfully installed a compact flash card (through an adapter), inside a 4th gen iPod as a replacement for the hard drive. It is only 4GB at the moment, but CF cards up to 16GB are getting relatively cheap, so I might get one of those and start using by old broken 4G iPod again, +now with shock-resistant energy-saving flash-based storage+.

I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

I have an old ipod touch and it keeps saying, ipod is disabled. I connected it to itunes and it said, sorry you need to put the passcode in, but it wont let me. And my power button doesnt work.

iOS: Unable to update or restore

HT201413 Why is it my songs or none of my information appearing in my ipod? What can i do? its been a whole 2 days connected to my itunes and it still says waiting for items to copy

Why is it my songs or none of my information appearing in my ipod? What can i do? its been a whole 2 days connected to my itunes and it still says waiting for items to copy

my iPad it get stuck on step 8 with a prompt that says "waiting to copy items" it stays on like that for hours
Reset your iPad.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
I recently upgraded to to the iOS 5 on my iMac and iPad
You don't need to manually sync using iOS 5.
Help here > Apple - iCloud - Learn how to set up iCloud on all your devices.
Message was edited by: Carolyn

HT4623 I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with

I updated my Ipod touch 4th gen (IO6 or whatever its called) And it has the picture that says to connect my ipod to Itunes, and I did, now it says "ITunes has detected an Ipod in recovery mode. You must restore this Ipod before it can be used with ITunes." I just updated it and now I have to restore it??! I don't wanna lose all my things on my ipod just for a stupid update! Please someone help!

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Note:
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download

My windows 7 computer will not detect my ipod since updating both itunes and windows. I've tried downloading them again and testing the ipod on a different computer which does detect it.

My Windows 7 laptop won't detect my iPod since the last update of iTunes and Windows. I've tried downloading them again. The apple device manager has an error message.

http://support.apple.com/kb/ts1538

HT1459 My iPod touch screen just turned a white-ish green color and I can't turn it on or off. I can't connect it to iTunes, and the back is too scratched up to see the serial number so I have no way of getting it. Can someone tell me how to fix it?

My iPod touch screen just turned a white-ish green color and I can't turn it on or off. I can't connect it to iTunes, and the back is too scratched up to see the serial number so I have no way of getting it. Can someone tell me how to fix it? Please tell me quickly! I was right in the middle of something!

Did you try a reset?
iPod touch User Guide (For iOS 5.1 Software)

Connecting iPod launches iTunes and Windows Explorer

Similar Messages

Maybe you are looking for