Connecting iPOD to car radio

Hi there,
Recently, I got a new car. A Seat Leon with a radio/MP3/Navigation system. The system is the exact same one used in VolksWagens (IIRC the manufacturer is BlauPunkt).
Since I'm taking a long trip from Holland to Denmark soon, and I don't want to listen to the German 'Rundfunk', I decided to replace my old iPOD (it got very sick. Its HD went 'click' all the time, which can't be good)) with a new iPOD 30 GB.
This morning I stepped into my car, excited like a kid in a candystore, and hooked up the USB cable to the USB port of my car. Then I plugged in the iPOD, which told me to not disconnect. SCORE! Or not?
The iPOD realises it is connected, and starts charging. It also pretends to be playing, but my radio won't recognise it. Anyone have any experience like this? The dealer I bought the car at recommended me to RTFM and configure the radio for AUX, but I don't think there's such a thing, and they are closed now, so I cannot even yell at them now.
Anyone at all? whimpers
Thanks.
Peter
PC   Windows XP Pro   IRTEHANGRYZ0RZRAWR!!!!!!!!!ELEVENTYONE!

Having a USB port is not all you need. It's just one piece.
Is the car radio 'iPod Ready'?
The radio needs to be aware that it is an iPod connected to it, and not just some USB storage device which has MP3 files on it.

Similar Messages

  • Connecting iPod to car radio - USA-Spec

    Just installed the USA-Spec adapter to connect my iPod to the factory radio in my Toyota via the CD changer (no factory iPod connector). This is by far the best sounding and most elegant solution I have found - since it's a direct connection and there are no wires showing.
    There seems to be an issue with the pause/play on the iPod sometimes getting out of sync with the radio. When you turn the radio off the iPod goes on and visa versa.
    Could really use some insight for resolving this - before it drains my car battery.
    Thanks.

    Contact the car manufacturer.  Find out if it is compatible with your model iPod Nono.  You must be specific as which model you have in order to receive the correct information from the car manufacturer.

  • My ipod nano 6th generation will not work connected to my car radio?

    my ipod nano 6th generation will not work connected to my car radio? My wife's ipod nano 4th generation works perfectly.

    Hey CorineNL,
    If your iPod not recognized by iTunes or computer, I would follow the directions here:
    Follow this troubleshooting assistant.
    Also see these articles for further assistance:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iPod not recognized in iTunes and Mac desktop
    from: iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Welcome to Apple Support Communities!
    Best,
    Delgadoh

  • Connecting mini to car radio

    My sister wants a device to connect her ipod to her car radio. She has an older car so it doesn't have a built in port. Her radio does have a cd player. Does anyone have any suggestions for one that works well (she's invested in a few duds in the past)?
    Thanks!
    Message was edited by: sdjurek17

    see if this helps
    http://www.crutchfieldadvisor.com/S-tH7aRkVXTSY/learningcenter/car/ipod/ipod_ins tallation.html?page=6

  • Connect Iphone to car radio system

    I try to find a way to connect my Iphone to my car radio. I wan to listen my mp3 and use my phone with the car radio system.
    annuaire et actualité

    There are many ways to do this (I use the MonsterCable ipod adapter in rental cars, and the Pioneer Ipod Interface for my P7500DVDII) both with decent results. (great results if you turn on airplane mode). All GSM phones can effect stereo equipment to some degree, and the iphone is no exception. Alot of the 3rd party kits do not use shielded connections which just makes the problem that much more obvious. I found if I adjust the location of my phone in relation to the transmitter and the radio the Monster fm modulator gives satisfactory results without disabling my ability to recieve phone calls. The pioneer is the best, however I can't place the phone in the holder which was installed with the kit since it is in the DIN above the stereo (VW Jetta) and the phone constantly interferes with the amplification circuits. Moving the phone 3-4 inches fixes it.

  • Using Ipod with car radio

    I have tuned my wireless adaptor with my car radio but it does not seem to register it. Can anyone tell me how to do this successfully?

    Your radio has to be on the same station as your wireless adaptor. If they are on the same station, try a different one. The ones that work best for me are the ones that are usually just static, like the 88s on FM Radio. If none of this works then something is probably wrong. Check your connections and battery also. There may be a software you need to install on your iPod.
    Hope that helps!

  • Why can't I connect iPod to car stereo with red/white RCA cables?

    I have red/white/yellow RCA (I think that's the name of them) plugs in my car stereo and I bought a cable to connect it to my iPod. It's the small plug (3.5 I think) on one end and a split 'Y' that's red and white on the other. The people and my car dealer connected a cell phone that is also a music player to it and it works, but it won't work with the iPod connected. The dealer thought it should be able to work with my iPod, but doesn't know why it won't. Are iPods able to connect to a car stereo this way. Is there another special cable that I need to get?

    No, I should think that would work fine. I have a splitter like that connected to my hifi and no issues...you would want to make sure the volume on the iPod is up all the way; I don't know what car stereo you have, but possibly it's a setting on there that isn't right?

  • Cark-126 connections (esp. to car radio)

    I am struggling to find wiring instructions for the Cark-126 car kit. Can anyone help?
    In particular I want to wire it into my Car Radio (Pioneer KEH-P4830R in 1999 Honda Civic) so that:
    * I use the radio’s loudspeakers (ie. not the Cark’s speaker)
    * The radio mutes automatically (the radio does specifically support this)
    1. Do I need to buy any additional cables to do this? (ie. not already included in the car kit).
    2. If not how do I connect the kit’s control unit (HFU-4) to the radio?
    3. Where do I connect the Yellow (“radio mute”) core of the PCU-4 power cable?
    4. Is there anywhere I can still download / obtain the installation manual? (it’s no longer available on Nokia website)
    Thanks, Andrew

    You will need to buy a mute interface to make the sound come through the car speakers, this will also provide power to the car kit & can be ordered with a cark-126 plug already on the lead, so it just plugs in. The pioneer radio will have a yellow wire on the back with a tag stating mute wire, connect this to the yellow on your car kit. I would not recommend you try and install this yourself because you can do a lot of damage if you dont know what you are doing, look in you phone book and find a specialist who can supply all the corect parts and fit it properly for you.
    Danny b
    Nokia Accredited Installer
    If my answers help you, give me a Kudos. Its like a pat on the back.

  • Ipod to car radio

    I have new a Eclipse cd3000 car radio with an ipod adapter, 1pc106. When the radio was first installed it interfaced perfectly with my ipod. Now I have lost the ability to select playlist > albums. I tried to putting in the software again, I have tried all sorts of things, but the radio won't read the ipod like it did before. I don't think this is an ipod problem becauses every once in awhile it works.
    Any suggestions?
    Email me at [email protected], if you have a good suggestion or have experienced a similar thing.

    I have new a Eclipse cd3000 car radio with an ipod adapter, 1pc106. When the radio was first installed it interfaced perfectly with my ipod. Now I have lost the ability to select playlist > albums. I tried to putting in the software again, I have tried all sorts of things, but the radio won't read the ipod like it did before. I don't think this is an ipod problem becauses every once in awhile it works.
    Any suggestions?
    Email me at [email protected], if you have a good suggestion or have experienced a similar thing.

  • HT1477 Good evening.  What kind of an adapter do I require to plug my ipod shuffle into the Aux In plug to connect to my car radio??  Thank you.

    Good evening,  What kind of an adapter do I require to plug my ipod shuffle into aux 1 outlet in my car to go through radio???

    It's not really an "adapter."  It's a cable with a mini-stereo plug at both ends.  Here's an example
    http://www.amazon.com/Monster-iCable-Player-Auxiliary-Input/dp/B002AR5XIK
    Connect it from the shuffle's headphones jack to the auxilliary audio input on car audio system.  You called it an "aux 1 outlet," but it's really an audio INPUT, correct?  DO NOT connect it there, if that is an audio OUTPUT.  It needs to be an audio INPUT.

  • Suggestions, products to connect ipod to car?

    ipod video/ipod nano
    looking for the best product and where to get it to connect my ipod to my existing car audio system.
    04 vw toureg with disk changer in back and navigation system.
    have tried wifi and am radio connection... not good.
    thanks for any suggestions

    additional info,
    I bought the Harmon Karton Drive+play, which was just ok, but the cable did not last long for 2 months, so I bought it back to the shop, as they did not have the spare cable for the replacement, they offered me to exchange for this iPlugRDS
    http://www.revozport.com/iplug-rds.htm
    which is the best iPod connection for car, if your car stereo does not offer any option for aux in/line in input

  • Problems connecting iPod to car & home stereo

    Whenever I connect my iPod to my car or home stereo, I can only hear music out of one speaker. Is there a setting I need to adjust from the iPod itself in order to hear my music in stereo mode?
    Please help, I'm leaving on tour tomorrow morning!

    I'm connecting my iPod from the earphone jack into my home stereo using white & red RCA cables.
    I'm also using a car adapter that plugs from the earphone & little flat slot next to it and this to the cigarette lighter.
    Neither way am I able to hear my music in stereo.

  • TS1425 iPod nano - loses functionality when connected to car radio

    For the past week, when I connect my iPod nano (4th generation) to a car radio (and I've tried it in several) it brings up a splash screen of the radio manufacturer which stays on the iPod screen and prevents any further access to the iPod functionality. This only happens when connected to a car radio, otherwise the iPod functions normally. So in effect, the iPod is unusable when connected to the car radio, which is where I do most of my listening. Anyone know how to help eliminate this problem?

    It sounds like a battery issue to me. When you connect it to the PC it draws power from the computer and thus it is able to function. Apparently it doesn't have enough of its own juice anymore. You probably just need a new battery.

  • Connecting to car radio

    After connecting to my car radio via inbuilt ipod cable for around half an hour or so my ipod freezes and has to be reset via itunes. Any ideas?

    There are not one but many ways:
    1) Use a cassette adapter that has 3.55mm connector (there are many brands and very cheap)
    2) Get a Car stereo that support A2DP and connect via Bluetooth (of course then you need to change the car stereo but hey this is a good excuse to do it). This is the most comfortable solution as the phone will connect automatically to it when you start the car.
    3) Get an FM Transmitter with 3.5mm connector and use the FM radio (I've used the Belkin which I didn't like and also the Kingston which I like you just need to keep the volume down in the phone so that it doesn't distort, Nokia also has an FM transmitter)
    4) Get a car Kit or Hands free that connects to a car stereo.
    5) Get a car stereo that has Line-in inputs (RCA or 3.5mm). This is by far the best audio quality solution!, and what you should do if you really want to enjoy good sound.
    6) I'm not sure but are there uPNP enabled car stereos?
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • IOS 7 not working with car radio

    After updating iPhone 5 with iOS 7, it wont connect to my car radio - I simply get the message "USB ERROR"
    Any fixes?

    I wish I could find a solution my car radio is doing the same I have a clarion cz702 CD player. It doesn't even try to charge my phone it's like my phone locks the CD player from communication with my cd player

Maybe you are looking for

  • Faster Alternatives to Bridge CC

    I only use Bridge as a photo browser--I use Lightroom/Photoshop for any real work. But sometimes I just want to browse a folder and be able to zoom and/or open in Photoshop. So I do use Bridge in this very limited way. But CC is so slow as to be non-

  • What is the normal temperature for a MacBook Pro?

    I have a mid 2010 2.4 ghz core i5 Macbook Pro. And i fell that the temperatures get really hot, i installed a application to check and the temperature of my machine is around 90 degrees Celsius after just using it for 15 mins and thats in higher RPM

  • IChat is not friends with AOL anymore?

    I am trying to set up an iMac G3 Indigo 500mhz with iChat. I have recently installed Tiger on it, which is running fine along with the several software pkgs. that I have put on it- Adobe CS, Office, etc.. I can not get iChat to connect to AOL. I have

  • Error While Integrating Unifier with Oracle Business Intelligence Publisher

    Dears, I followed up exactly the unifier installation documents, as well as the Configuring the BI Publisher for Unifier. And Once I am trying to enter the BI Publisher data in the Unifier Configuration i get an error message "TEST FAILED Connection

  • How to lock cells in BPC

    Hi, I am developing a BPC solution for client. I have a requirement to lock certain cells so that user is not able to enter/change any  values in these cells. I don't want to lock the entire sheet. Please advise if you've resolved similar requirement