Connecting iPod to stereo with fiber optic cable???

My kingdom for the right answer to this question.
I'm brand new to the whole iPod scene. Just bought an 80GB video iPod and I want to use it with my stereo system instead of the old bulky 200 CD carousel.
I see that I can connect the iPod and stereo using the AV connection kit, but isn't there a way to get digital audio sound quality with some sort of fiber optic connection?
Will the Monster iCable Fiber Optic Kit work? It doesn't list the iPod as a use, but it sure looks like the non-Fiber optic end would fit into the iPod headphone jack.
If anyone knows, I'd greatly appreciate the help. I'm a total newb about this and haven't had any luck with my online searches.
Thanks in advance.

No you cant do it but
http://discussions.apple.com/thread.jspa?threadID=863621&tstart=180

Similar Messages

  • Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

    A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

    Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
    One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
    Carl

  • My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.

    My apple TV is connected to a DTV with an HDMI cable and to my Yamaha receiver via optic cable. We rented a movie on Apple TV and.found that the movie played, but we only got audio for music tracks. Voice tracks were silent using both TV and receiver.  This only occurred on the rented video and on recorded shows on my cable DVR. previews and other content on Apple TV are fine. Any ideas??

    Previews and trailers do not contain 5.1 audio.
    If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

  • Can I Replace or Extend the Fiber Optic Cable?

    There is a cable that runs from the Verizon box outside of my house, comes into the basement corner  of the house, and plugs into the router.  Do I assume this is fiber optic cable?  This cable is about 3 ft long which is problematic in getting a good signal throughout my house.  I would like to move the router up one floor.  All the other cords and cables are long enough to do so.
    My question is what is this cable called and can I replace it or extend it myself?  If so, is there any pertinent information I would need to know to do so such as part names and where to get them.  If not, how do I get a longer cable installed.
    I am not tech savvy and grateful for any help. 
    Solved!
    Go to Solution.

    rebeccajeanne wrote:
    Do I assume this is fiber optic cable?  
    No.  The fiber optic cable attaches to the Optical Network Terminal (ONT), which is usually outside.
    For speed tiers < 100Mbps, the installation is usually coax from the ONT to your router.
    For speed tiers > 100Mbps, the installation is always ethernet from the ONT to your router.
    If the cable from the ONT is indeed an ethernet cable, you can certainly replace it.
    The ONT has a standard RJ45 jack which the other end of the cable is connected to.
    You can confirm if you're connected  via ethernet in two ways.
    1)  The WAN ETHERNET light on your router should be lit and the WAN coax light should be off.
    2)  The ethernet cable should be connected to the white WAN port on the back of your router.
    Since your ONT is outside, replacing the ethernet cable presents a couple of problems..
    1)  When VZ installed the cable, they passed it through the wall, then sealed the opening with silicone.
    You need to make sure you can fit a preterminated cable through that opening unless you're capable of terminating a cat5 cable yourself. 
    2)  You need to reseal the opening with silicone.
    An easier option is an RJ45 coupler.
    http://www.amazon.com/Britta-Products-RJ45-Coupler-F-F/dp/B000BSLW8U
    rebeccajeanne wrote:
    Can Verizon replace it for a longer cable?  
    Yes, but they will charge you a truck roll to do so.  $88 or so.

  • How difficult/costly is it to install fiber optic cables?

    I live in an area that has no underground cables, or fiber optic cables and I've lived with this 1.5 MB DSL connection for about 4 years now.  Yeah, it sucks.  I was curious as to what is the biggest factor when it comes to installing fiber optic cables in an area and how a company determines as to where they are going to be located.  Thanks in advance.

    Installing fiber optic cables is not just a "how hard is it?" question.    yes, the business considerations do take into consideration the physical issues (how hard it may be [above ground and below ground]), but there is more:   Can the company get City\county\state PERMITS to do so?  What engineering problems are there? (mountains, existing drainage or other water culverts, etc.?)  and then there is also the business consideration of 'how much uptake will be realized if we install the fiber cable?' (how many users in the neighborhood?)
    fiber optic technology (to the premises) is here and will not go away (more like CAN NOT go away), however, until the economy picks back up, it may be cheaper for more people to see how much more can be squeezed out of the existing technologies (DSL & cable) before they want to switch to what may cost more for them.  SO, in your area, the company may not be able to get the permits, maybe just not yet, who knows?   They may also not see customer uptake in your area, yet.  
    You may not be aware, but Verizon has recently sold-off whole states and partial states-worth of fiber-to-the-premises accounts, in what could have been Business decisions based on profit for stock holders.   -If their investments to install it will not be recouperated within the time limit required by their stock holders, it may not be installed for a while.
    .02
    cjacobs001

  • Sfp and fiber optic cabling

    Hi,
    I would like to ask if i can use our existing fiber optic cabling after i purchased a cisco 2960 with 4 sfp uplinks also, i purchased sfp modules for each switch. Does it mean that i only need to purhcase a converter from ST for SFP?
    thanks

    If the fiber type is compatible with your transmission type (single mode versus multi-mode) then all you need is to correct the physical connection.
    You can change the connectors (or, more likely have them re-terminated by a pro ... it can be tricky) or use a jumper with the compatible connectors on each end (like SC-to-ST, SC-to-LC, whatever).
    It's usually bad practice to use multi-mode fiber in a single mode application or vice-versa.
    For multi-mode applications, you may get difference performance for the different flavors; 50/125 MMF tends to get longer distance than 62.5/125 for GigE.
    Good Luck
    Scott

  • Trace Fiber Optic Cables

    Hi Folks
    How to trace Fiber Optic Cables,I m Working in environment where no Fiber Optic Documentation  and I Don't know how cables are running between fiber patch pannel on the rack on access switch and the fiber backbone .no label to start working and prepare documentation

    Are the fibres carrying live traffic?  If they are not live you can trace them with a red light source, its like a pen that has a laser that operates in a visible wavelength, heres one I found which seems to use very bright LEDs:
    http://feedthenetwork.com/cable-and-satellite-tv/visible-light-use-for-fiber-continuity-testing
    And this one goes 10km with a laser:
    http://www.dhgate.com/10km-red-light-pen-fiber-optic-test-fault/p-ff8080812b2e44e5012b48263732532d.html
    With everything you get what you pay for and cheaper ones will not go as far as the more expensive ones.
    With my laser based red light source I see a break in a fibre patch cord and I can also put a gentle bend in the fibre and it will leak out the side of the sheath.
    I hope this is obvious but DO NOT look into the end of a connector EVER, you can't see 1310nm or 1550nm but it will give you a very cheap laser eye surgery job and will almost certainly damage them beyond repair.
    If the fibres are live you may have to disconnect them to see which port goes down, thats the safest way to do it anyway. 

  • HT4889 Do I connect the two macs with the ethernet cable or do I have to connect both from the ethernet cable to the modem/router

    Do I have to connect both macs directly with an ethernet cable without network connection to be able to transfer files/apps from the old to the new as I have tried migrating on the network without success.

    They can be connected directly or via an existing network. Turn on File Sharing for the computer that will be sending files.
    Using Migration Assistant will work best if the two computers are connected via Firewire cable. This assumes both computers have Firewire ports.

  • Received apple tv as gift, my tv/home theater situation has no HDMI input capabilities.  My only option is an optical connection, please give me some inexpensive optical cable suggestions???

    Received apple tv as gift, my tv/home theater situation has no HDMI input capabilities.  My only option is an optical connection, please give me some inexpensive optical cable suggestions???

    Welcome to the Apple Community.
    HDMI is required to connect the Apple TV to a TV or through a receiver. The optical connection is for audio only.

  • Can I playback a movie that i purchased in iTunes on my MBP connected to a projector with a DVI cable?

    I am trying to playback a movie that i purchased in iTunes with my Macbook Pro while it is connected to a projector with a DVI cable. It starts but after a few seconds it will stop the playback. What do I need to do to fix this problem?

    I don't know your configuration or the source of the issue.  As long as it is normal playback it should work.  I have run output from a MacBook Pro to a TV set with HDMI and as far as the computer is concerned it is simply playing back the medium and doesn't care how I have the output rigged.  The TV simply acts as an oversize monitor.

  • Job openning for Labview developer with fiber optical experience, Fremont

    I have a job openning for Labview developer  with fiber optical experience,  Fremont, CA
    If you have interesting, reply this email ASAP.

    Continued here

  • Job openning for Labview developer with fiber optical experience

    job openning for Labview developer  with fiber optical experience

    I am a Test Engineer with 10 years LabVIEW experience, as well as TestStand, VB6, C, Assembly language, programming
    also experienced with electronics/hardware, and a talented problem solver
    I worked for CIENA Corporation writing automatic testing software for their fiber optic products (DWDM)
    Available due to plant closing
    please contact me at [email protected]
    thank you

  • Bad sound when connecting iPod to stereo

    Can anyone help with this one?
    I am trying to connect my iPod to my stereo receiver. I have the 5th generation 30gb iPod. I hooked it up to my stereo (Sony str-de825) with a monster cable through the tape & video inputs and it it sounded low and muddy. When I turned it up the sound the receiver blew.
    I now have a new reciever and bought a dock for the iPod, and I am getting the same crappy sound through the stereo and don't want to blow it again (obviously) but would like to be able ot use my iPod in my stereo. Does anyone have any idea of what's going on?
    Thanks in advance.

    Can anyone help with this one?
    I am trying to connect my iPod to my stereo receiver.
    I have the 5th generation 30gb iPod. I hooked it up
    to my stereo (Sony str-de825) with a monster cable
    through the tape & video inputs and it it sounded
    low and muddy. When I turned it up the sound the
    receiver blew.
    I now have a new reciever and bought a dock for the
    iPod, and I am getting the same crappy sound through
    the stereo and don't want to blow it again
    (obviously) but would like to be able ot use my iPod
    in my stereo. Does anyone have any idea of what's
    going on?
    Thanks in advance.
    Why video? verify that u r connecting in the right place. try in the cd input.the cable is ok? try a new set
    .

  • Connect Ipod to stereo

    When I connect my Ipod to my home stereo (with jack and RCA cable), only one speaker is working (sometimes both, but very rarely). I tried to use the dock but it is not any better: I can't figure out why I have this problem: I double checked and everything seemed to be plugged correctly. Any idea?
    Fujitsu   Windows XP  
    Fujitsu   Windows XP  

    To Ombre57
    Double check your Audio program, ; try using your headset and listen for both audio channels;
    It could be a list of things that could cause your problem.
    Report back on what you've tried and give results??
    Texcavator You need to post your problem as new case, otherwise it'will get confusing.
    Though it appears your A/V cables are bad!

  • Fiber Optic cable types

    Hello
    What are the differences between the following cable types. What does µ and mm 50mm or 62 etc 125µ values determine? Where to use which?
    Dorax 8 Core MM 50/125µ F/O
    DR-5613-12 Dorax 12 Core MM 62.5/125µ F/O
    DR-5613-24 Dorax 24 Core MM 62.5/125µ F/O
    DR-5613-4 Dorax 4 Core MM 62.5/125µ F/O
    DR-5613-8 Dorax 8 Core MM 62.5/125µ F/O
    12 Core SM 9/125µ F/O
    Dorax 24 Core SM 9/125µ F/O
    DR-5913-4 Dorax 4 Core SM 9/125µ F/O
    DR-5913-8 Dorax 8 Core SM 9/125µ F/O
    Thanks

    Typically, the fiber ends are terminated into a patch panel, using SC or LC connectors. Then jumpers attached to the patch panel to the equipment.
    A pigtail is just a fiber with one enter terminated with a connector and the other end a bare fiber. You can splice (fusion or mechanical) the pigtails to the fiber cable ends and install them in a patch panel.
    It is difficult to install connectors on singlemode fibers so installers purchase factory made pigtails or they purchase preterminated patch panels to terminate (connectorize) the fiber.
    Connectors can be attached to multimode fiber in the field using polishing equipment or special mechanical connectors (depending on the volume of connectors).
    There are all sorts pre-terminated products (cables, connector modules, patch panels, etc) on the market that reduce the need for the user to field terminate the fiber ends.
    I've attached a couple of links, one for product and one for fiber basics.
    Enjoy!
    Panduit Fiber Products
    http://www.panduit.com/Products/ProductOverviews/FiberSystems/index.htm
    Fiber Optic Association
    http://www.thefoa.org/tech/ref/index.html

Maybe you are looking for