Connecting iPod touch to a WPA2 Personal Wi-Fi

When the iPod touch requests a password to connect to the network, isn't is the "passphrase" in the Linksys router security page that you must enter. i.e. The brutally long number?

IT's whatever password you use to access your network. same password as your laptop or wireless printer uses to access your network. the security page that you refer to is most likely showing that password. I recently visited a family member in the miltary that used a super-long password on his network, and it took us a LONG time to enter that alphanumeric phrase into 4 devices. it was "brutal" as u say.

Similar Messages

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

I bought an old iPod touch It is 6.1.6, i would like to add a new icloud account but it can't let me. this iPod touch belonged to another person and i don't know where is he can you tell me please how to add a new icloud account??

The 4G/iOS 6 does not have an Activation Lock. That started with iOS 7.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Connect iPod touch 2G to Reciever using RCA's? It cannot be this difficult?

Hello!
Need to connect iPod touch 2G to my reciever using RCA's?
But +I do not want to use the headphone jack....+ (I heard I will get higher sound quality using the bottom multi-pin connector on the bottom of the touch going to a left and right RCA's) +I have uncompressed (AIFF) files on my iPod touch and want the best sound quality possible.+
I found a couple companies that make these cables with one being the Cables To Go 4-Feet RCA Stereo to Dock Connector Cable for iPod and also the Nyko Stereo Link for iPod, but from reading the reviews on Amazon neither of them will work with the Touch 2g (or the iPhone for that matter).
I am also open to a simple dock of some sort that would provide me RCA outputs. Seems as if Apples universal dock would be great but it seems to have NO RCA outputs on the back of it.
If anyone has a solution to this I would be very very happy!
+I have looked high and low for a solution for this seemingly simple task.+
All I want is a connector that goes from the bottom of the touch to 2 RCA's so I can input this into
my home stereo so I can listen to my ripped CD's in high quality. A dock would also work too! I do not need charging or anything fancy....
(already have try the Tekkeon NavDock for iPod which was cool because I could watch my videos on tv from my touch but i dont need that)
+*just looking for something simple that works with the iPod Touch 2G.*+
*It cannot be this difficult?*
thanks, techo

As I stated above, the docking connector is not a "true" line-out, it does have a volume-tap so the volume control will work. It probably is somewhat cleaner than the headphone out (haven't measured it), but it is not going to be a significant difference as any improvement you get from the connector is severely limited by the DAC in the iPod.
You get no improvement in sound from using the pins on the 30 pin connector versus a 3.5 mm jack. If you buy a Universal Dock it is passing the signal from the 30 pin dock to a 3.5mm female jack, then you use the 3.5mm to RCA. Going directly from the dock connector to RCA will not improve the sound, the 3.5mm connector is not inferior in itself to the RCA connectors.
The A/V kit will get you the ability to watch your videos on your TV and output the stereo signal to your receiver. If you want even better sound for your music, get an Apple TV and use the HDMI cable to transfer the video and sound:
http://store.apple.com/us/browse/home/shopipod/family/appletv?mco=MTE4MTU

Connecting ipod touch to apple tv to watch filmon

connecting ipod touch to apple tv to watch film on
any info please

See:
Apple TV: How to use AirPlay Mirroring
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay

How can you connect iPod touch or iPad to TV and watch it what kind of connection?

How can you connect iPod touch or iPad to your tv and watch it

Not really anything to do with Apple TV
If you want to connect an iPad or iPod
http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter
http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter

Any way to connect ipod touch 3G to other non apple devices via Bluetooth??

Hey People,
I was jus wondering ,
can i connect ipod touch 3G to other non apple devices via Bluetooth??
is there any special application which fullfill my wish,
if it is there, then it will make my day,,,,,,,,,,,,,,,

no
bluetooth on the ipod touch only allows for the use of bluetooth stereo headphones and peer-to-peer gaming between two ipod touches (or presumably iphones)

Get iTunes to open automatically when I connect iPod Touch?

Can I get iTunes to open automatically when I connect to my iMac with the USB connector? I upgraded my OS today to 10.6.8, and now it doesn't happen. (It's a 2nd generation iPod Touch.)
Thanks a lot!

Problem solved thanks to another post here on the same topic.
1-Opened i Tunes & Connected iPod Touch
2- Unchecked "Open iTunes when connected"
3 - Synched iPod
4- Hit "Apply"
5- Checked "Open iTunes when connected"
6- Synched iPod
7 - Hit "Apply"
8- Ejected iPod and closed iTunes
9- Re-connected iPod Touch
10- iTunes opened automatically!

Message: itunes has stopped working when I connect ipod touch-windows 7

message: "itunes has stopped working" when I connect ipod touch-using windows 7

Make sure to check your internet settings or the settings on your wi-fi server (if accessible). You may also want to make sure that your not in a place where wi-fi is obtructed.(concrete walls other machines, etc.)

TS3595 Greetings.When T connect ipod touch 4 gen.to computer,picture of an apple comes on but no picture of a connection.So I can't communicate with computer.

When I connect ipod touch(4th gen.) to desk top computer,picture of an apple comes on but no picture of a connection.But computer makes a sound .Thank you.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

White screen when first time connected ipod touch to mac

I followed the instruction on the quick start manual (open itunes,connect ipod touch to my mac,and finish the registration,sync music etc.)Then the screen is still WHITE. I've tried some efforts including reset and recover,but still white screen! Couldn't believe this!
Help me!
PS：The touchpad seems to be ok. When I push the sleep button and slide my finger on the bottom of the screen,such a sound like the screen is locked or unlocked sent out.
Message was edited by: WuXP

uncheck the music in itunes and resync to delete her music from your ipod
then create another account using everything the same except change your email address from a ".com" to ".net"
like me, I have an ipod touch and my mom has a shuffle, she doesn't like using credit cards online
so we use mine for both accounts but with [email protected] as mine and [email protected] as hers
that way we can both use the credit card and on the same pc but with different passwords too

Unexpected "Connect iPod touch to iTunes" screen

I powered off my 2G Touch before flying to Argentina; then powering up again on arrival brought up a new-to-me "Connect iPod touch to iTunes screen", which no amount of button presses would get past.
Luckily there was a PC where we were staying, and with iTunes installed, and with USB, so I was able to get going again, esp. since I'd disabled automatic syncing, though now everything was in Spanish. But,
Q1: does anyone know what this screen really means?, and why it might have come up? [a wifi router was nearby]
Q2: would a hard reset [hold sleep/wake and home buttons for 10 sec] worked to get past this screen?

I have the same problem, getting the 'connect' symbol or icon while travelling. I just got off the phone and an unsatisfying conversation with Apple support. Apparently, this is a "rare?" problem that is caused when there is some kind of software failure on the iPod Touch, and that there is no way to get around it except connecting to iTunes on some pc somewhere, ideally your own PC and iTunes. This happened once before for me but I was home and just plugged it in. The iPod recovered, connected and synced with no error message at all. The rep at Apple support said there is no log or trace that can be retrieved, so the mysterious iPod Touch software failure will remain unknown. He said I could take it in for warranty service, but who knows if they could reproduce the problem. Maybe the new iPhone/iPod Touch software version will run better (or worse). ps, I tried all possible combinations of hard reset on the unit, but nothing else works to recover.

WRT310Nv2 vs. iPod Touch 2nd generation (WPA2)

I'm trying to connect an iPod Touch 2nd generation to my WRT310Nv2 'WPA2 Personal' network. I already previously connected:
4 PCs
2 Tivos
1 Wii
1 iPhone 3GS
The iPod Touch is running a clean install of iPhone OS 4 beta (yes, I know - I like to play).
The iPod Touch sees the network but doesn't accept the passphrase.
I really don't want to revert my network to insecure WEP just for this **bleep** iPod Touch.
Anyway know the magic trick?
It looks like other manufacturer routers don't have this problem.

Are you getting any error message...?
First thing to do is try and reset your iPod. This is just like rebooting your computer when a program is frozen. To reset, hold the sleep wake button on the top of the iPod Touch and at the same time, hold the Home button/key. Continue to hold until you see the Apple Logo, then release. When the screen comes back, go to Settings/and tap on WiFI. This will display networks available and within range. Choose a network by tapping on it. Enter a password. A check mark will appear in front of the Network Name if you connect.Go to your home screen (press the Home Button/Key) and launch Safari and try to connect with a webpage. If the issue persists, try resetting your network.
Try changing the Wireless Channel on the router and check.Also reduce the security on your router from WPA2 to WPA and check if that make any difference.

Blue Screen when connecting iPod Touch -

Hello,
unfortunately I have no points to reward an answer.
Still, I get my chance to get one from a friendly and understanding person.
The iPod Touch is a "September edition" with firmware 1.1.4 (4A102) lately updated.
Whenever I connect he iPod, my PC immediately crashes with a bluescreen.
I didn't have such problem with previous firmware. I guess I could come back to 1.1.3 and wait for 1.1.5. However, I would rather do it only if there is no other solution.
Thank you in advance for any information and kind regards,
Richidee

Hi Richidee and welcome to Apple Discussions Forum!
Well, try to follow the instructions above written:
Go to the computer's properties (Right-click on "My Computer");
Click the “Hardware” tab and then hit “Device Manager”. A new pop-up window will appear;
Click the plus sign next to “Universal Bus Controllers” to enlarge their list;
Right click on any items that identified as “Usb Host Controller” or “Usb Universal Host Controller”;
Then lick “Update Ddriver”, and configure it to do “this time only” and then hit next button;
Select “Install the Software Automatically”
It will automatically search and install updated drivers. This should work, the problem comes from your PC and not from your iPod.
PS: You don't need to have points to reward other users with points. Just click "Helpuful" or "Solved" over any post.
Hope this helps!

ITunes sends error message when connecting iPod touch

I have an iPod touch 2nd generation, and I decided to reset it as it was having problems, and now it displays the connect to iTunes message like when I first purchased it. I connected it to iTunes like it wanted, but when I connect the iPod to iTunes, iTunes displays the following error message "iTunes could not connect to the iPod "iPod touch" because an unknown error occurred (0xE000001)". I am not an uninformed person on these matters and have tried everything I can think of i.e. updating iTunes, using a different dock connector etc. Any help would be greatly appreciated, thanks!

Hi Maxwell,
This is most likely a USB connection issue.
Make sure the iPhone is directly connected to a high-speed USB2 port on the computer, using the cable that came with it.
If the issue persists, try the general tips in this article: http://support.apple.com/kb/TS1286
-Jason

Problems Connecting iPod Touch 32GB to WiFi

Hi,
I have just purchased an iPod Touch 32GB and am having problems connecting to a server. I am using a Netgear DG834 router to connect to Orange. Netgear is now showing as checked on the Wi-Fi Networks page on the iPod with strong signal strength but I keep cannoy getting the message "could not connect to server" whenever I try any of the applications. Needless to say, the internet connections on my laptop and desktop are working perfectly. Thanks. Grant

Have you tried resetting your router? sometimes this is all you need to do to get the IPT to work properly. If you are using any type of security such as WEP or WPA2 then you are going to need to enter your password. Try a reset and then go to your wifi settings in the IPT and select your router and then click on the little blue arrow and check under DHCP and make sure you have an IP along with a router Ip and DNS entries. If you don't have a router IP or DNS entries try and renew the lease.
If you can't get it to work then reset the router again but this time try it without any security and do the same procedure as above. If that still doesn't work then the only other thing I can suggest is to look on Netgears website and see if there is a firmware upgrade for your router and to give that a try.

Connecting iPod touch to a WPA2 Personal Wi-Fi

Similar Messages

Maybe you are looking for