Connecting iTunes to Samsung smart TV using airport express.

Does anyone have any experience of connecting airport express to a Samsung smart TV to use as powered speakers? I have connected using a standard convertor cable from 3.5mm jack to dual connections but this is not showing up on the TV 'Source'. Samsung support have not been very helpful but I dont think I'm trying to do anything ground-breaking?! This worked perfectly well on the previous TV.
If this is a no-go - has anyone managed to stream iTunes onto the TV using the wireless network?
Any help/hints/warnings would be greatly appreciated.

My TV has RCA-type analog inputs but for some reason they do not recognise the input from the Airport Express. The music is streaming ok because if I connect headphones to the port on the airport I can get music playing.
I'm loathe to buy Apple TV to do what the Airport Express should do for me - however, I might end up down that route. Can I play all content from my iMac - even music which was loaded from CDs onto the machine rather than purchased through iTunes. I really dont want to have to pay £25 a year to mirror content I've already purchased in iCloud so that I can play it in my own house.
Thanks for the advice.

Similar Messages

Can't connect itunes to my remote speakers thru airport express

After having updated the latest itunes 7.3 my itunes does not recognize anymore my remote speakers and does not connect to them.
Have resetted my airport, to no avail. still, itunes does not recognize it.
please advise what to do as it is very annoying, when you make updates that your old configuration stops working.
many thanks
marwan

I had the same problem. It used to work without any problems but then stopped for no apparent reason. I tried resetting and hard-resetting the Airport Express (AX) many times, but no success. Plus the Airport Utility would never show the Airport Express once I configured it to join the exisiting wireless network (in my case a Airport Extreme).
Anyway finally this worked for me:
1) Hard-resetting the AX
2) Start Airport Utility and find the AX. But instead of going throught the guided steps to set it up, double click on the AX symbol and to set it up manually. Yo will see 5 icons in the meny bar - Airport, Internet, Music, Printers, Advanced.
- Airport --> Base Station: In give it any name and password.
- Airport --> Wireless. Wireless Mode: Join a wireless network. Select it below and the appropripate security settings and password.
- Music --> Enable AirTunes. Leave the rest alone.
3) Click Update. Close the window and wait until the AX restarted. (solid green light)
4) Let the AirPort Utility rescan the network.
5) Restart your wireless base station/router (as I said, in my case Airport Extreme. If you have another base station you may have to do it manually)
6) Start iTunes and presto you will see the remote speakers
7) Let AirPort Utility rescan the network. Presto, you see both the AX and the base station.
My setup: MacBook OS 10.4.10, Airport Extreme and Express, HP with WinXP Pro. Can also stream music form iTunes on the HP.

ITunes Cuts Out Periodically When Using Airport Express

I have a new Airport Express (with current software) hooked up to my Bose Home Theater system. I am streaming iTunes the Stereo but it periodically cuts out. Apple Help had me reset my Extreme and 2x Expresses to Channel 6. Still cuts out periodically, but much less than before. Anyone else seen this and can offer what to do?
Thanks,

i just bought a brand new airport express from apple and hooked it up to my brand new speakers. it also started periodically cutting out. so i followed apple's advice and tried different channels on my router. i went from 1 to 11 and still had the same problem.
then i tried decreasing my security down to WEP 40-bit. still had the same problem.
then i tried moving the airport to the middle of the room, about 6 feet away from both router and macbook pro. still the same problem. btw - i was using an optical cable from airport to speakers.
then i removed all security from my belkin router - and it worked. in the end i sent it back to apple for a refund. there's no way i can have my router running without security.

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

Cannot connect to remote speakers using Airport Express

Yesterday I was able to connect to my hi-fi using remote speakers in iTunes 6.0.4 through my Airport Express (AE) and take full advantage of Front Row, however later in the day the speaker selecton pop-button in iTunes disappeared. I did a hard-reset of the AE unit, shutdown the computer, checked the preferences selection in iTunes etc, all without success. I checked the discussion boards of both iTunes and Airport for a solution. Found something interested where someone said that they shutdown the computer and went to bed and in the morning, hey presto everything was working. He thought that having a good night's sleep was the solution. So, I shutdown the computer and went to bed. The next morning, the light on the AE was green and after booting up my iMac Intel the pop-button reappeared (I still don't know what solved the problem) but now it will not connect to the speakers. It tries but gives us after 30 seconds or so.
Here is what I have done so far: I used Airport setup assistant to set up the AE. During that process I selected to join an existing network that is provided by my Airport Extreme base station and I selected to only use the AE to share a printer and play iTunes using WDS bridging. This process works every time.
Right now, the light on the AE unit is flashing amber. In Airport Admin Utility both the Extreme and the Express are listed but the Extreme has an IP address of the 10.0.x.x variety whereas the Express has an IP address 169.254.x.x variety! Strange. If I double-click on the Express it takes an age to get a response and when the response eventually comes - asking for the password I then get an error saying that "the airport admin utility was unable to read the configuration of the selected base station.
I have tried resetting and repeating the above without success. Therefore, any other ideas or help would be greatly appreciated. I want to boast about Front Row to my Windows friends without the embarrassment of connection problems

I am having almost exactly the same trouble with an Airport network I recently set up in my home. I have a G5 with a brand new Airport card, an Airport Extreme Base Station (also brand new) in the same room acting as my internet portal, and an Airport Express (yup--brand new) downstairs piping iTunes to the stereo.
I could get the G5 and Extreme base to talk without a hitch--they are right next to one another, after all. When I tried to link the Express into the same network, the Express vanishes. When I tried moving it into the same room with the Extreme, I could find it, and play tunes through a set of headphones. Moving to an outlet in the hall outside the room, it still worked. Moved to an outlet on the far wall of the room across the hall, it would play only sporadically, dropping out about 4 seconds out of every six. Anywhere else, and it wouldn't show up at all.
However, when I set up the Express to be a separate network, my G5 was able to access it and play music without difficulty, anywhere in the house. I've been playing iTunes on my stereo for weeks, with the downside that I can't do that and surf the web at the same time.
Last night I tried the experiment of moving the Extreme Base Station around. With my G5 in the living room, in the approximate center of the house (1/2-level above the basement, 1/2-level below the office--it's a split level), I was able to access the Express and play tunes on the stereo as usual. With the Extreme Base downstairs, right next to the Express, my G5 could not even locate its signal. Fifteen feet closer to the center of the house (but still downstairs): couldn't find it. At the base of the stairs: couldn't find it. At the top of the stairs (20 feet from the G5, but just around a corner): couldn't find it. Three feet out into the foyer at the top of the stairs (and now in a direct line of sight to the G5): 20-30% signal. Keep in mind that during all this, I could switch over to the Express network at will (75% signal) and play music downstairs without a hiccup.
It seems to me that there's something wrong with the Extreme Station itself (or at least, with the way it's trying to communicate). If it were external interference due to an outside network, a microwave oven, or a 2.4 GHz cordless telephone, I would expect it to effect both networks equally--but it isn't. The Express seems impervious. I've noticed in another set of posts that some people with wireless connection problems have found that switching from the most recent version of the Extreme Base firmware (5.7) to an older one (5.5.1) has fixed the problem. I plan to give it a shot myself. I'll let you know how it turns out.
Dual 2.5 GHz G5 Mac OS X (10.3.9)

Best Practices for Using Airport Express to Stream iTunes via Ethernet

So I've been reading various posts about using Airport Express to stream iTunes and I've been reading various posts about using the Ethernet port on the Express. However, not sure I've yet found an inclusive listing of settings for both. Wondering if anyone out there has such a thing?
I have an (older) Aiport Express (802.11g, no 'n') running the latest Firmware (6.3, I believe). I have it lashed into my switch via a Cat 6 cable and the 3.5 stereo mini running out to RCA jacks into my RussSound (home audio system) amp. I'd like to make the Express ONLY a iTunes streaming device getting its network link over Ethernet (AirTunes). So, what does everyone suggest for best settings for turning on the Ethernet, turning off the WiFi and running AirTunes?
Thanks much in advance!
cheers
cp root

Airport > Wireless > Wireless mode "off"
Internet > Internet connection > Connect using "Ethernet", Configure IPv4 "via DHCP"
Music > Enable Airtunes
Enable Airtunes over Ethernet (if this choice appears).
When I first did this, the remote speakers didn't appear in iTunes. I poked around to see what I missed and couldn't find anything wrong, but the next time I ran iTunes the remote speakers appeared.
If you run into a firewall problem, make sure your OS X firewall is configured to "set access for specific services and applications": http://docs.info.apple.com/article.html?path=Mac/10.5/en/18503.html
Firmware 6.3 is correct for your Express.

Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7.

Updated iTunes to 11.0.3 and now when I try to use Airport Express I get a message in iTunes that states, "an unknown error has occured (-15000.) I gave the Airport a hard re-start, so I don't think that is the issue. Using Windows 7 Ultimate

Looks like I fixed it., thanks to another post I read. I went into my Norton Security. Under Settings. Chose Firewall. Program rules. changed the itunes setting from "auto" to "allow" This also fixed my error (-3212) which would not allow me to connect to the iTunes store.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

I want to use Airport Express in my hotel room using the wired internet connection, but I don't carry a computer, just my iPad. Is that possible?

I want to use AirPort Express when I am traveling. I would like to use a wired internet connection in a hotel room to create a wireless connection. However, I do not normally carry my laptop, just my iPad. Is it possible to do this?

You will have to pre-configure the Express using AirPort Utility on your computer before you leave on the trip. The Express will store and remember the settings.
You might want to check with the hotel in advance to make sure that they have Ethernet ports available. Most hotels have switched to wireless and the others are not far behind.

HT4587 what about set up apple tv using airport express base without WIFI connection

How to set up Apple tv on my tv using airport express base without internet connection

In theory you can configure the AirPort Express to broadcast a Wi-Fi network that the Apple TV can connect to. The default configuration of the Express is to broadcast an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN. You would then configure the Apple TV to connect to this network.

Connecting a webcam using airport Express.

I have a Logitech webcam that I use with ichat. The webcam is working fine when connected directly to the MacBook via usb port. I would like relocating the webcam and use Airport Express to connect it wireless. Is it possible?

hi
the only option is to get a wireless webcam for Mac
you can do search on
http://www.google.co.uk/search?hl=&q=macwirelesswebcam&sourceid=navclient-ff&rlz=1B3GGLL_en-GBGB393GB393&ie=UTF-8
there are couple around but the image quality is not as good as you get from a usb webcam but hey it still good if you are doing surveillance purpose

I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Using Airport Express as internet connection for one Mac and one PC

Will probably be judged a complete dork for this question. I have successfully set up my Imac G5 to run an internet connection through an Airport express. My partner runs a PC (Windows XP) and I want to connect this too. Have installed a USB wireless card on the PC, and installed Airport Utility, but it just won't find the Airport Express - it will however find the Imac with something like 96% signal strength. So I set up a network on the Mac and have successfully linked into it with the PC, but it soon comes up with a connectivity problem that will not allow internet browsing. So two questions - can I connect two computers to the Airport Express at once for internet browsing, or do I have to do it through linking the PC to a wireless network? If the latter is the route - any ideas on what the connectivity issue will be? Help!

No, not if the AirPort Express "joins" the wireless network.
No, I do not want to join a network.
It is possible to have the AirPort Express "create" a separate wireless network that would not have access to the Internet, but if you did this, you would need to log off of your normal network....(losing your Internet connection) and then log onto the AirPort Express network when you wanted to listen to AirPlay.
Then, when you wanted to have Internet access, you would have to log off of the AirPort Express network and log back onto your normal wireless network.
Ok, I understand that it is not possible to use airport express only for sound streaming while having an Internet connection at the same time. Airport express does need to join a network if I want sound streaming next an Internet connection. I wanted airport express not to get into way of my Internet connection because in this case the sound streaming messes up sometimes. When I configure airport express only as a sound output, the problems I encounter fade away but then I cannot access to the Internet. Anyhow thanks a lot for the answer.

Connecting iTunes to Samsung smart TV using airport express.

Similar Messages

Maybe you are looking for