Connecting kodak esp7250 printer to pc via bthomeh...

I have followed the instrucions to connect this printer through home hub and the printer says it has a 90% signal but it cannot make contact with my pc. any suggestions please?

Look at this menu for help
Wireless connection problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Require all in one kodak ESP7250 printer software for iMac

require all in one kodak ESP7250 printer software for iMac

The software for that printer is available from this Kodal web page:
http://support.en.kodak.com/app/home/src/gosupport/selected/true
You do not say which of the four families of iMacs you own nor the Mac OS version, so that about as far as I can point you.
This forum is for iMacs made before 2006

Kodak 6150 printer connection problem with iMac 10.64

I finally got tired of the HP printer eating me alive with ink costs. I purchased a Kodak 6150 printer. Surprised to find out I had to install drivers but that is done.
Here is the problem. If I connect the printer directly via USB to the iMac it works fine. If I connect it to my airport extreme I can print from my Macbook but NOT from the iMac.
Was running a trial version of Intego just to see if possible virus was reason for almost incessent presence of the rainbow wheel - no virus. I turned off the Intego and still no luck being able to print from the iMac.
Per the previous question I did double check and sharing for all is on. The little screen on the printer says it is connected to my network. The printer is about 2 feet from the iMac and the airport is halfway between them so no walls etc in the way.
Any idea's?
Thanks
flobrn
[email protected]

1. When printers are setup they JOIN a network, and they remember the network name and wireless password. Since that has been changed, you have to REJOIN the printer to your new network of your AirPort Express. Basically, the printer has to be reconfigured. You can always contact your printer manufacturer for assistance.
2. Navigate to the , then System Preferences, then Network. Click on the Advanced button on the bottom right, you should see a box with Preferred Networks. Remove the unwanted networks (such as your neighbors network).

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

How do I connect an HP printer via Linksys printserver to a wireless network

Hi:
I have an HP laptop running Windows Vista 32-bit Home Premium.
It is connected wirelessly to the Internet via a Motorola SBG6580 cable Gateway.
I have an HP C6280 All-In-One printer/copier/scanner: wireless is not built-in.
A Linksys WPSM54G Printerserver is connected (hardwired) to the printer.
Currently, the printer is connected to the laptop via USB cable, and I am able to print.
(Previously, my wireless network connectivity was via a Linksys WRT54G router,
along with a modem. These were replaced with the Gateway.)
How do I setup wireless connectivity between the Printserver and the Gateway ?
I am not very network savvy (yet) , so I am not familiar with wireless connectivity details.
Any ideas ???
Thank you
DaleBr

From what I can tell you need help connecting the Linksys printer server to your network. Linksys has good instructions for the configuring the printserver. I've linked that site.
After the printer server is on line you might need to change the printer driver setings to reflect the new settings. A driver software reinstall should do that.
Please mark the post that solves your problem as "Accepted Solution"
Sometimes it takes several posts back and forth to get to a solution - please be patient.
I am employed by HP

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

Since upgrading, both our wireless printers are still visible, but OSX will not connect with them. Both work via connecting from other sources via the same wireless router (airport). What do I need to do to get my printing/scanning working again?

First thing to try is reset Printing System:
OS X Mavericks: Reset the printing system
Next would be reset the router (power off 15 secs then back on). And, 2 minutes later, reset the printers 1 by 1.

Can't connect computers to printer (b210) via network because there are "other networks"

I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I CANNOT PRINT FROM MY IPHONE 4 TO MY BROTHER 8890DW PRINTER WHICH IS CONNECTED TO MY TIME CAPSULE/NETWORK VIA ETHERNET CABLE???

Why can’t I print from my iPhone 4 to my brother 8890dw printer which is connected to my time capsule/network via ethernet cable??? My iPhone does not even locate my printer,even though I have no problem printing from my Mac to the same printer.

Typing in all caps indicates shouting, is considered rude and is difficult to read. Many simply do not read such posts.
You would need an airprint enabled printer or an app that proides printing function.
iOS: AirPrint 101

Printer not working via usb connection to airport time capsule

I bought an airport time capsule 3 TB, and I wanted to connect my multifunctional printer-scaner "canon i-sensys MF4350d" via usb to my airport device.However, I found a problem. Although my printer working properly in direct connection via usb,not working when connected via usb to my airport time capsule. when I chose printer In nearby printer list this error apeared:"the software for this printer is currently unavailable please contact the manufacturer for latest version" when I chose add printer and chose the printer model this error apeared:"the printer information has not been acquired"
devices:
printer: canon i-sensys MF4350d
air port time capsule 3 TB
macbook pro me664
osx mountain lion 10.8.5 (latest version)
printer software:canon UFR II ver 2.43(latest version for my printer)

Login to airport utility via Mac or windows pc. Look under connected usb devices and it should say your manufacturer for the printer. If not try rebooting both printer and router with them being plugged in or try different usb cable or port on printer.

Cannot "connect" a bluetooth enabled kodak photo printer

i have a kodak photo printer 500 that is bluetooth enabled and after going through everything that i could possibly think of on my powerbook i still cannot print to it.
i can get it to connect with the bluetooth file exchange utility but through the printer setup, it will not accept the very same pass key.
anyone familiar with this situation?
powerbook g4 Mac OS X (10.4.3)

Okay, I just got off the phone with Kodak tech support. There is no way to set this printer up as a printer to print from within a program.
He explained to me that the only way it was designed to work is by clicking on the Bluetooth icon in the menu bar, selecting Send File, choosing a jpeg from your drive and clicking ok to send it to the printer, basically a file transfer. You have no printer control as far as selecting number of images per sheet or anything.
So don't get rid of your usb cable just yet. I guess it's okay for just sending a quick print from say a bluetooth enable camera phone which works basically the same way. If you were hoping for more you're out of luck on this one.
Edward Cross
PowerMac Dual-Core 2.3 8GB RAM (2) 74GB Raptor Drives(Raid 0) Mac OS X (10.4.6) Rocket RAID with (4) 300GB Maxtor RAID0 and 250GB WD Stock drive

My iMac running mountain lio SO 10.4 has lost connection with my Kodak ESP5200 printer. Both are connected to my ISP router OK

My Imac conputer has lost connection with my printer.
The Computer is running Mountain Lion OSX10.4
The printer is a ESP5200
Both are commected to the router.
Any ideas ??

Follow the steps @ > Troubleshooting printer issues in OS X

Can my iPad 4 be connected to my Kodak 5250 printer?

Can my iPad 4 be linked to my Kodak 5250 printer and if so can you assist in helping me to link the two.

You have a few options
First look on Kodak's site. They have partnered with google docs to offer some options, such as being able to send the document to a computer hardwired to the printer. And I think some models support you sending the document directly to them, but I'm not sure on that part (it required a google docs account and since I didn't want another online account I didn't dig too deeply into it.
Also you can look into third party apps. I have print n share and it works just fine with my 7250. There is also printopia and print central and i'm sure there are others.

HP office jet 4620 has good wi-fi connection but, cannot print directly .via my computer?

I have spent 2 full days trying to print from my computer (also wi-fi enabled) through to my HP Officejet 4620.
I have had splendid downloads from HP trying to sort the problem but no luck so far.
I have windows Vista and my computer is a faithful old Toshiba Satelite L300 and, I have not connected to a printer before on this computer. To enable the printer to engage with my wi-fi rovider was easy and successful. It prints test papers great.
Any help would be so appreciated.
moneypenny

Hello missmoneypenny,
Welcome to the HP Support Forums!
I see that you are unable to print over a wireless network with the Officejet 4620 with a Windows Vista computer. When you try to print, what happens? Is there an error, is the printer not found, does the software not install, etc?
Have you tried the Print and Scan Dr, if not, run it and let me know the results.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Cant get ipad to connect to kodak wireless printer

cant get ipad and kodak wireless printer working downloaded apps on i pad

Diane-
I don't think any of Kodak's printers support AirPrint. Search the Kodak website to see if they have an iPad App that will enable printing to their printers.
Also look for info on Print n Share and Printopia, and search the web for AirPrint Activator. One of these alternatives may work for you.
Fred

Trying to connect kodak c315 to macbook air downloaded driver but cannot run software why?

just purchased new macook air and trying to connect to my Kodak C315 printer via WIFI
I have downloaded driver from Kodak support but when I try to install get error that cannot run software as it is from an unknown developer
can anyone help please

See how to open an app from an unidentified developer in http://support.apple.com/kb/HT5290 and http://support.apple.com/kb/PH14369

Connecting kodak esp7250 printer to pc via bthomeh...

Similar Messages

Maybe you are looking for