Connecting Lacie 5Big Network via eSATA

I purchased a Sonnet eSATA extender cable for my mac. I installed as instructed and with the system turned off I connected the Lacie via eSATA turned on the lacie first and waited till all the lights stopped flashing then turned on my Mac. I waited a bit but could see the drive mount on desktop so went into system profiler. The drive didn't show there or in Disk utility. What am I doing wrong. The drive was set up before as a network drive but I need to transfer 4TB of info and via a network and on to the Lacie RAID it was saying about 3 days. I still want to use it as a network drive after the transfer and so the extender was a perfect solution if it would work as it was only £25. Can anyone help as this is starting to do my nut in and if it takes more the 3 days to sort it I might was well of done it via the network.

The 5big Network drive has eSATA expansion ports - to add additional drives to the 5Big.
The ports are not to connect the unit via eSATA to a computer.
The 5big and connected drives can only be accessed via the network.
The 4big is LaCie's product to connect via USB, FireWire, or eSATA ports on a computer.
Mike

Similar Messages

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

I am having trouble connecting to wifi network via airport express on my windows xp pc, but I know it is working because I can connect on my macbook, does anyone know what the problem is?

Tell us more about the problem, I can think up 100&1 different reasons, but don't have time to go through all the possibilities. So.. what happens?

G4 (800MHz) connects to airport network via N300 wireless modem but won't bring up a browser page (Safari or Firefox)

G4 (800MHz) connects to airport network via N300 wireless modem but won't bring up a browser page (Safari or Firefox) - so the connection is there, everything says its a goer - I get a clear black signal icon in the menu bar on top, and a clear signal strength in the Internet connect dialogue box - - but when I run either of the browsers, it just says 'not connected to internet' - even for the 'software update'.
the N300 is a Netgear N300 Wirelsess Modem Router (model DGN2200) - ADSL (802.11 b/g/n)

tests to try:
-- have you tried connecting by cable? What happens?
-- Set your dns to 8.8.8.8 and 8.8.4.4 This is the google dns server. generally faster.
Check out your settings.
apple > system preferences > network
Double click on network connection you are using.
Pick the TCP/IP tab.
Verify that you have a DNS Server.
You can use
harddrive > applications > utilities > network utility
to diagnose the situation.
You can ping google.com.
Result:
Ping has started ...
PING google.com (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=215.362 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=279.597 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=189.747 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=250.657 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=183.232 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=243.753 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=173.108 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=230.239 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=180.639 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=232.177 ms
--- google.com ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 173.108/217.851/279.597/33.615 ms
If that does not work, try pinging 64.233.167.99 Result:
Ping has started ...
PING 64.233.167.99 (64.233.167.99): 56 data bytes
64 bytes from 64.233.167.99: icmp_seq=0 ttl=244 time=189.655 ms
64 bytes from 64.233.167.99: icmp_seq=1 ttl=244 time=213.471 ms
64 bytes from 64.233.167.99: icmp_seq=2 ttl=244 time=257.873 ms
64 bytes from 64.233.167.99: icmp_seq=3 ttl=244 time=172.745 ms
64 bytes from 64.233.167.99: icmp_seq=4 ttl=244 time=226.723 ms
64 bytes from 64.233.167.99: icmp_seq=5 ttl=244 time=171.883 ms
64 bytes from 64.233.167.99: icmp_seq=6 ttl=244 time=260.308 ms
64 bytes from 64.233.167.99: icmp_seq=7 ttl=244 time=172.963 ms
64 bytes from 64.233.167.99: icmp_seq=8 ttl=244 time=198.840 ms
64 bytes from 64.233.167.99: icmp_seq=9 ttl=244 time=181.215 ms
--- 64.233.167.99 ping statistics ---
10 packets transmitted, 10 packets received, 0% packet loss
round-trip min/avg/max/stddev = 171.883/204.568/260.308/32.247 ms
If pinging 17.254.3.183 works but pinging Google.com doesn't. You have a bad DNS Server address.
I use Google.
Google provides free dns lookup. Their numbers are:
8.8.8.8
8.8.4.4

Hello my iphone 3g can not connect to home network via wifi

Hello to all, with my iphone 3g can not connect to home network via wifi. This only happens if I apply protection to the network. Unprotected my Iphone connects fine. Obviously the password to write error-free. I can not figure out what depends on this factor, however, another iphone connects fine. Help me please.

I have a similar,but slightly different problem. My iphone 4 recgonizes my home wifi and shows it under Settings, but will not access it, no signal shown, just 3G. It will access other wifi signals. My wife's iphone works fine, as does an ipad and macbook. This is new for my iphone, about 2-3 days.
Help! I reset network settings and rebooted the router (Apple), no avail

When I connect imac to network via airport all devices on the network lose internet connectivity

Every device stays connected to the network but the internet stops working. Usually the network will continue to function normally for about five minutes when the imac connects, but then every device loses internet access via the network, NOT just the imac. As soon as I turn off the imac's airport they get internet connectivity back. A wired network connection to the imac seems to work OK.
The airport is configured as "Using DHCP"
Mac OS X 10.6.8
As far as I know, no changes have been made to the computer recently (but it is not my machine and the owner isn't here atm)
I found one other resource with the same problem here:
http://www.mac-forums.com/forums/internet-networking-wireless/183185-turning-my- macbook-airport-breaks-internet-connection-entire-network.html
but the solution didn't work. When I deleted the three files mentioned in the solution in that thread, my problem is not solved.
If you have any ideas or need more information I would love to hear from you.
Thanks guys.

Yes it is possible that the two machines are creating a Computer-to-Computer network and are not going through the Express.
To delete the Alias you may need to login with the Admin User.
Will
1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini Mac OS X (10.4.5) Updated - Get Started with iWeb (WillG4PB.com)

Connecting to local network via Airport?

Hi!
How to set up the MacBook to reach computers on a local network, wirelessly?
I have 4 computers on my local network. 3 macs, 1 pc.
Set up is: Zyxel Prestige 2602R and a SonicWall wireless firewall.
2 macs and the pc are connected to the router via cables.
The MacBook is running wireless.
Everything is fine connecting to the internet. But there is no conectivity
to and from the MacBook, unless I connect it via a cable.
What am I overlooking?
JanD

Check that you have sharing on all your computers set up. Also on your macbook you will need to set up sharing also. This is done under your system preferences window.
You can connect to your other network computers in finder. Click network in the left finder pane and if they are set to share correctly you should see them come up. Just connect to them and a connection should show up in the left finder pane.
Mort

How connect to windows network via wifi?

i try to connect to my windows shared network via wifi,but it doesn't work.
here's the error message
please help me to solve this problem
thank you.

Check the settings on your iPad for automatic downloads.....
Settings>Store>Automatic Downloads>Apps. If it is enabled, turn it off. The apps shouldn't download again as far as I know, but this is a good a place as any to start.

Can't connect to WiFi networks via tray icon, manually adding works fine

I've searched for about a day for anyone having a similar issue and have come up with nothing so far. I have an older HP laptop with Windows 7 32 bit that is having issues with connecting to WiFi networks. It will find all available wireless
networks just fine, and when I select mine, it comes up with the prompt to enter my password, however when I hit OK to connect, the prompt disappears and nothing happens or responds afterwards. A few things that I've tried in order to troubleshoot and
narrow down the problem:
-I've tried connecting to two different wireless networks; one with WPA2 encryption and one with no encryption, both have the same issue (obviously the non-encrypted wireless network doesn't prompt for a password, but once I hit connect all prompts disappear
and acts as if I did nothing).
-I've added the WPA2 encrypted network manually to my list of wireless networks, and once I do this it connects just fine. When removed, it disconnects and the issue happens again (this confirms that the wireless password I'm entering is correct and
that there are no issues with the wireless network itself, as well as other devices working flawlessly on the same wireless network).
-I've disabled all firewalls and antivirus through this whole process, did not make a difference.
-I've reset winsock which didn't make a difference.
-I've run a virus scan, no viruses on the laptop.
I've run out of ideas as to what would prevent being able to connect to a wireless network through the normal process of finding nearby access points, putting in your password, and having it work. I understand that I could simply leave the wireless
network added manually, but this is not an option for when the laptop is taken elsewhere as having to add whatever wireless network I'm near manually is not something that should have to be done.

I would recommend to update the driver for you wireless nic as a first step. Also, if installed, get rid of third party utilities that 'manage' your wireless network(s)
Also check if you can
clear out the remembered connections i've encountered issues before when a network with same ssid but different connection settings was stored by windows.
MCP/MCSA/MCTS/MCITP

Laptop connects to wireless network via a WRT54G but it can't access internet

I’ve got a WRT54G cabled to my desktop, I set up a WEP-secured wireless network for my laptop, and the laptop connects to the wireless network and receives a strong signal, but it can’t get Internet access. I know the problem is not with the router because the laptop CAN get internet access when it's cabled to the router. (So the problem isn’t an IP address problem—which I knew because I had to reconfigure the static IP of the laptop to get it to connect to the network in the first place.) I turned off the Windows firewall, Symantec virus protection, and Internet Explorer’s pop-up blocker on the laptop. The laptop connects perfectly to the wireless network and receives a strong signal, so why can’t it access the internet??
Linksys tech support couldn’t figure it out, so I really need your help. Thank you!

Karen wrote:
(because I wanted it to have the same static IP address as the router).
Just wanted to clarify what you meant in this post. If you entered the router's IP address as the static IP for the laptop, you would get the symptoms that you are describing. Try entering a IP that isn't normally used like 192.168.1.142. (That is assuming that your router IP is the default 192.168.1.1.)
If that isn't the issue, please tell me what ipconfig is returning on both the laptop and the desktop.
Royce

I get an error 79.00FE on my HP LJ5100. I'm connected to the network via HP JetDirect 615n

Is this a formatter or a Jetdirect card problem?

We are getting the same error (79.00FE Printer Error) on our HP LJ 8000 and HP LJ 8100. We have mixed 32 bit and 64 bit computers on the network connected to those printers. The error seems to arise when a 64 bit (Windows 7) user tries to print a Google map. Unplugging the network jack, turning the printer off, deleting the print job from the queue and then reconnecting and turning the printer back on temporarily solves the problem. Does anyone know of a more permanent solution?

Connecting iMac to Network via Ethernet Cable and Airport Express

I've tried reading through the various posts to solve this and haven't had any luck. Any help is deeply appreciated.
I have an Airport Extreme as my main 'base' for our wireless network. I purchased an Airport Express today with the notion of using it to extend my network in the following way: I want to connect an iMac and a printer to the Express (using Ethernet and USB cables respectively) and have the Express serve as a remote for the Extreme base. I have found a number of websites saying this is possible, but none explain how to. I tried the WDS option, which failed to work. I later saw posts here saying that was not the optimal scenario. I'm afraid the 5Ghz/2.4Ghz settings combined with Airport ID addresses has pushed me past my competency!
Thanks in advance for your help and a festive St. Patrick's Day!

Temporarily, power down the AirPort Express and concentrate on the AirPort Extreme to make sure that it is functioning correctly, can get an Internet connection, etc.
A complete power cycle of the network is often useful when you have been making changes. Power everything off, order is not important.
Wait a moment, (or wait 5-10 minutes if you have cable modem), then power up the modem first and let it run a moment by itself. Then power up the AirPort Extreme the same way.
Check your settings using AirPort Utility - Manual Setup
Click the Wireless tab just below the row of icons
If the Wireless Mode setting is "Create a wireless network", make sure there is a check mark next to "Allow this network to be extended"
Note the exact setting for Security that is being used
Update to save any changes
Post back when the AirPort Extreme is functioning correctly as above and we'll tackle the AirPort Express

Is it possible to share one wifi with two time capsule which are both connected to the network via cable?

Hello Community,
this is my first contribute here so please do not expect a 100% question with all important information! I will do my very best!
Situation:
2 Time Capsule (one 1st generation, one 4th generation)
both connected wired to my network
Question:
Is it possible to create one unique wifi Network with both TC's ? So wireless Devices connect to one TC (which is best at this position) but both TC's route traffic over wired connection?
Understand what I mean?

Hi Bob,
just configured it, but my primary TC's is in orange blink state now!
Error Message is "Double-NAT"! If my understanding is right, than the Problem is that my Router and my primary TC's does NAT!
Do I have to deactivate DHCP and NAT on my router or is there another way to work around?
Thank you so much
Christoph

Cannot connect to my network via ethernet, others can

i have a WRT54G with two wireless that can see each other, and also i have a desktop that can see them too, but when i try to join i can see any one and noone can see me, but i can get on to the internet...o and when i click view workgroup computers it just beeps and does nothing

I have a feeling that if you disable your firewall on your pc, plug into one of the ports and then reset up your home network that it probably still will not work but lets get the wireless out of the way first.
the other side is maybe, just maybe the other pcs are blocking you for whatever reason but im still leaning toward your one pc as the issue.
http://www.airspaceonline.com

MBP no longer connects to network via Airport

today my MBP will not connect to my network via airport. Several other apple devices connect to the network no problem. MBP connects to the network OK via ethernet cable.
When I try to connect it just keep prompting for network password & user password, generates spinning wheel but then returns invalid password dialogue box. Tried several times and no success - occasionally there is an additional dialogue box " Apple80211agent......."
Pass word is fine as 5 other devices connect without any issue. What is going on?
Incidentally, just thought to create another Airport connection and hey presto it connects.
Still confused.

Your local LAN runs through your router.
All your ethernet ports, and your modem and router, should be behind and filtered from excess current. That means a UPS generally. And run input line thru UPS (coax) first, then run RJ45 back through UPS again (there can still be excess surge or current on the line).
Modems and routers can be compromised by surge outage or storm. So can ethernet ports.
You have two ethernet ports and you tried with both also.
What you did not do that I would have added is SMC Reset / Reset NVRAM/PRAM.
This is what I have had for the last year, very nice and stronger signals thruout the house.
http://www.amazon.com/NETGEAR-Wireless-Router-Gigabit-R6200/dp/B008HO9DIG/

Unable to connect Panasonic HDTV to home network via Wi-Fi

I am unable to connect my Panasonic TC-L37E3 to the internet via Wi-Fi. I purchased the additional Wi-Fi adapter for the set, and while setting up the connection I am able to see my wireless network on the TV.
I have a basic WEP key, but I am unable to connect to the network via any of the connection options given. For every option there is a two minute timeout which is the eventual result of each connection attempt.
My router is 9100EM, with at 10M/2M service plan. I am unable to connect the TV directly to the router via CATV since it is a considerable distance.
Has anyone experienced a similar issue or can suggest any troubleshooting actions?
Any help is greatly appreciated!

Try switching the router off of WEP and onto WPA2. There is a WEP Setting regarding Authentication that allows for Open or Closed authentication, but even then, devices expect Open. WPA2 is faster and more secure, and it's a good bet that the TV will work once you switch the router over.
You can change the security settings by going to http://192.168.1.1/ and logging in using admin as the username, and your router's serial number as the password. In the Advanced Wireless Settings, you'll find the option for WPA2. Enable that option with Pre-Shared Key and set a Passphrase (if one is not already set), and then set up your devices to use that Passphrase (is case sensitive) once you apply the settings.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Connecting Lacie 5Big Network via eSATA

Similar Messages

Maybe you are looking for