Connecting laptop to monitor/TV and image is not full screen
I tried to connect my hp stream 11-d010ca to my monitor and my laptop via HDMI but could not get the image to appear "full screen". The picture is being duplicated fine but is only being shown in the centre of the screen and the image is not being stretching the entire screen. Basically there's the duplicated image of the laptop in the centre of the screen with large black unused space around the image on my secondary display.
Here's what is being shown on my Intel HD Control Panel. I am only getting the option to "Centre Image" and there is no option to "fit to scale" etc. The preview image in the link posted is similar to what I am experiencing with the unused black space.
http://imgur.com/AEfADmh
Thank you for your help in advance
Hi,
Please try to treat the TV as an external monitor and using Personnalize setup to fill besktop to whole screen of the TV/Monitor.
(a) Right click a blank space on desktop,
(b) Click Personalize,
(c) Click background
(d) Select fill - this will fill ... this will fill just the desktop but everting.
(e) Click Apply and Ok ...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do? Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone. I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address. I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!
There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.
-
My laptop hard disk crashed and i could not take backup of iTunes.
My laptop hard disk crashed and i could not take backup of iTunes. I installed a new hard disk and installed i Tunes but If i connect my iphone 3Gs to the fresh installed iTunes, will all the music and apps on my phone get erased ? How to sync my phone so that it does not get erased.
See Recover your iTunes library from your iPod or iOS device.
tt2 -
In fire fox and google chrome CSS and images are not loading
I am facing problem with jrun, In IE-8 application is working fine, but in FireFox and Google chrome CSS and Images are not loading.
in fire fox and google chrome requests are Aborted.
thanks
Ashok Gadiparthi.Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com -
Css and images are not loading in SharePoint website
Scenario:-
System Configuration- Windows server 2008 R2, SharePoint Designer 2010, SP server 2010 all are in Local Machine.
1. I had reset the Windows server 2008 R2 password and opened SharePoint Designer 2010.
2. Opened previous working site and found error- services unavailable- HTTP Error 503. The service is unavailable
3. For this issue, I reset (as I reset for windows server) the Identity password in App pool for "SharePoint Central Administration v4" application.
4. The error "Service Unavailable" got vanished.
But encountered new problem - .css and images are not loading.
5. I re run "Product Configuration wizard" with below steps:-
A) Do not disconnect from this server.
B) No, this machine will continue to host the website
Still Problem persisting.
What tried:-
1. Resetting IIS Server.
2. Restarted SharePoint Admin Services from "Service window".
3. Recycled App pool.
Just do let me know for further information.
I have Checked so may forum and sites but no solution :(
Looking for excellent resolution :)Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com -
lightroom 5 is not showing previous successfully imported images and images are not identified as missing, there are no images shown in the library, how do I reconnect missing images?
If the images are not identified as missing ... then you can't reconnect them
But I'm not really sure what is happening, as I don't understand your description of the problem, could you show us a screen capture? Or describe what appears on your screen in much more detail... -
How can I combine a lot of text and images on the same screen?
How can I combine a lot of text and images on the same screen? I can get a couple of words on the screen with a graphic but not 10 lines. I need 10 lines on the page with the image.
Priscilla,
I routinely combine 10 lines of 36 pt bible or lecture text to a suitable background using Boris Title 3D.
Many times the text is too long to fit the screen using Boris, so I devide it into 2 or more parts with no transition between sections.
In my case, the text is on the screen as the speaker quotes them.
David -
my ipad froze with my camera screen on and my background on full screen. Every button I push on
it takes a pic. won't shut off either, it takes a pic insteadFirst try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414 -
It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?Just figured out it also does not work with the Mail app.
-
I was using the newest version on OSX 10.7.5 and I was in full screen mode and viewing a photo and it was impossible to exit full screen. This happened at 11:03pm on Friday April 12, 2013. I deleted this from my apps and then deleted iphoto from my purchases in macbook app store the search it the app store and it says it has still been installed. What can I do to fix it?
Well deleting it from your machine was not the way to go.
Deleting it from your Purchases List was definitely not the way to go.
So, I'm not really sure how you're going to reinstall it.
But figure that out and we can try help. Contact App Store support. There's a link on the right hand side of the App Store Window. They should be able to get it back on your purchases list so you can reinstall it. -
I am about to publish my iBook with many photographs. It is interactive in that small images will go full screen when touched. Is there a size limit on my book? If so how many megs?
2Gb is the max
-
Why does my caller I.D. photos show as a small thumbnail in the upper right corner and not full screen? I have used both photos I have synced and photos I have taken, yet others have full screen photo I.D.'s. I have looked onlime at several threads and there are no real answers as to what I need to do or am doing wrong.
I am also having this issue.
I've just spoken to someone in the Apple Support Centre who advised me that since the product is in beta, he is unable to assist. I wanted to find out whether someone was able to delete the data for me, or 'reset' the photos app somehow. This apparently cannot be done. He suggested I provide feedback via the feedback page, which I will do, but to be honest doesn't fill me with a lot of confidence in the issue being fixed.
I also deactivated the service and waited the 30 days for the pictures to be deleted - this should have been completed in mid-January. Instead, my iCloud.com Photos page is now showing the photos that should have been deleted as grey squares, just as you described. I am also unable to delete these photos; every time I try, I get the same message about a server error.
I am also unable to disable the service by enabling and then disabling it on my iPhone. Each time I have tried this it hangs on uploading for several hours, with the progress bar not moving at all. When I disable it on my iPhone, the web app remains unchanged.
If anyone has had this issue and has managed to fix it, PLEASE share your wisdom. I am out of patience! -
how can i burn a slideshow to a dvd disc and keep the same full screen hi-def quality to it? I exported it to idvd but much of the quality was lost.
Ask in the iDVD forum on what's the best way out of iPhoto and into iDVD. The resident expert there, Bengt Wärleby, can give you the best option.
OT -
How I can allow always and for all sites full-screen mode?
How I can allow always and for all sites full-screen mode?
And I want choose anywhere option "never show notification about full-screen mode" (screenshot attached)
RUS
Как я могу всегда разрешить и для всех сайтов полноэкранный режим?
И я хочу выбрать где-нибудь опцию "никогда не показывать уведомление о полноэкранном режиме" (скриншот приложен)There is a preference setting on the <b>about:config</b> page that is meant for developers and testers to make this possible, but it is not meant for normal users.
*full-screen-api.approval-required = false
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config -
How to view movies and iplayer programmes on full screen on the new iPad, can only get letterbox display.
If the Movie is IN wide screen you Got 2 options
1 letterbox display
2 display where it Cut the left and right side part to make it fit
Maybe you are looking for
-
Post Author: vjromeo CA Forum: Charts and Graphs Is it not possible in Crystal XI to have an entry in the chart legend for a trendline? I have charts that have been done in Excel, that we'd like to move to Crystal, which include multiple trendlines
-
Hi Friends, I want to establish a RFC connection to a system. Normaly, then I logon to the destination system using the gui I have to provide a saprouter string like /H/123.23.22.222/H/. So then I connect through rfc how can I provide the string. Tha
-
Dear All, Here is a problem, Stock of a material is lying in Quality inspection stock. but there is no inspection lot pending for this material. how can i send it to inrestricted stock. bcoz if i send it throgh movement type 321 by t- code mb1b, it g
-
Choosing album art for album with multiple art
I tried looking around for an answer to this to no avail... Let's say I have a single album that contains songs with different artwork. How do I pick which album art I want displayed in Cover Flow/Album Grid? I tried everything, including pasting the
-
Logic 9 bounce in place not working as it should
Trying to get the bounce in place to work on an external instrument track linked to a hardware synth. From the Logic 9 manual " The bounce process is usually performed offline, b*ut Logic Pro automatically switches to real-time bouncing whenever nece