Connecting laptop (XP) to Yoigo with 6310i (open)
From a Bluetooth DUN icon I can get the phone to start to access the network. In 'Navegador' mode (wap browsing, I think, this is a Spanish service) it works fine, so I have money on the SIM card and can connect via my phone without Bluetooth. So Bluetooth works, and we can access the network.
I believe that I have to set the phone to Internet to work with the laptop, which is what I am doing.
When I try to connect the phone says:-
Connecting...pause....Connect with Laptop?
I then 'Accept'
Phone - "Connected to Laptop" for 2 seconds then "Creating GPRS connection" then "Subscribe to GPRS first" at which the connection drops out and I get an error messge on the Laptop "Error 734: The PPP Link control protocol was terminated"
I thought that I must be subscribed to GPRS given that I can browse happily on the phone (In Navegadoe mode, not in Internet mode) and see the news, etc., with G on the display signifying GPRS.
What could be meant by "Subscribe to GPRS first"?
So near, but yet so far?
Many thanks for your help
I've found the answer so for the benefit of those who follow....
In the Nokia 6310i there are TWO places where the GPRS modem needs to be specified. Under "Settings" and under "Services" All of the internet and data stuff is carried out under Services and the modem was correctly specified in there but on the off-chance I re-typed the designated name under Settings > GPRS modem settings > Edit acess point and I changed the name for Access Point 5 (an arbitrary one) to 'internet' which was the correct designation for the Yoigo service. Then the thing worked perfectly.
Similar Messages
-
Connect to Azure SQL DB with Security Enabled Access required using SSMS
I'm looking to connect to an Azure SQL DB with Security Enabled Access required using SQL Server Management Studio 2014. I have tried checking off "Encrypt connection", but still errors out with "Cannot open database 'db name' on server 'hostname'
requested by the login. Access to the database is only allowed using a security-enabled connection string."
Thanks,
ScottHi Scott,
Sorry, I missunderstood your initial question and the documentation I referenced is not updated appropriately. You have to change the connection string to <server-name>.database.secure.windows.net when you enable the security/auditing features.
Documentation for this can be found
here
Thanks,
Jan -
Need help with connecting laptop
Hi there,
I looked through the boards and found some messages that kind of fit to my problem, but not completely so here goes.
I have a gateway desktop(windows xp) connected to dsl (charter) and a laptop(gateway solo with windows xp) that I am trying to connect through a wireless router (Linksys wrt54g).
When I connect the wireless router to my laptop it says it is connected, but I cannot get a webpage to appear and once my router is connected I cannot use my desktop online.
I am sure there is just some configurations that need done, but I'm not that familiar with alot of the comuter lingo in order to figure this one out on my own. I mainly use the desktop, but I would like to configure the laptop so I can use it online when needed. Help and keep it simple please...
Another question...do I need to use the wireless router or can I somehow connect my laptop through my desktop or just through my dsl connection?
Thanks, DeannaConnect the Modem to the Internet Port on the Router.
Then , Connect the Computer using a different
Ethernet Cable to Port 1 or Port 2 on the Router.
Now, Press the Reset Button on the rear panel of the Router
for 12 Seconds. Then, Release the Reset Button,
Unplug the Power Adapter to the Router. After 10 Seconds,
Unplug the Power Adapter to the Modem. Then Wait for
30 Seconds, Re-connect the Modem, and once the Lights are
up on the Modem, Re-connect the Linksys Router.
If yes, Open a new Internet Explorer
Page, and in the address bar, type http://192.168.1.1, press
return, And when asked for Username and Password,
Leave the Username blank and in the Password field,
type admin . This will help you access the Router's
Console.
In the Router's Setup Page, just below Setup Tab,
in the blue line, you could an option " MAC Address Clone "
Click on that, Enable it, Save the Settings
Below the Setup Tab of the Router's Console,
Change the MTU from "AUTO" to "MANUAL" , and
Set the Size to 1400, Save the Settings,
Powercycle the Modem and the Router.
Check the Connections.
If you are able to go Online when hard wired to the Router.
Then make your computer wireless and verify . . . -
Dell Laptops E7440 & E7240 - Issues with connecting to MDT 2012 deployment share
Hi,
Good afternoon.Need help on this please
-Test laptops Iam using are 2 * E7440 and 1*E7240. One laptop of model E7440 has our image installed and other two (1*E7440 & 1*E7240) are shipped from Dell with default Win 7 64 bit OS.
-Test desktops Iam using are Dell Optiplex 3020 & Dell 3010 . Both models have our own images of Win 7 64 Bit.
-Laptops and desktops are on same network .
-For OS deployments we have MDT 2012.
-While there are no issues with desktops, all the laptops mentioned above don’t connect to MDT deployments share . The detailed error message I get when I run a litetouch ISO is ‘A connection to the deployment share could not be made. Connection OJ.Possible
cause:invalid credentials. Retry : Try again to connect to the deployment share.’
-Have injected all possible network & storage drivers mentioned by Dell & Intel into MDT boot image but the problem still persists. Still WinPE doesn’t detect network adapter wherein IPaddresses are not picked in WinPE mode.
-Have been testing each and every driver by manually loading them into Winpe mode to see if they pick up the IP addresses and I finally found one driver by name ‘e1d63x64.inf ‘ which I downloaded directly from Intel website. This one is picking IP Address
in WinPE mode when loaded manually. Also have tested the connectivity to MDT server in WinPE mode with net use command and it was successful.
Have injected this driver into MDT Laptop deployment share, regenerated the ISO and tried again however Iam still unable to connect to the deployment share with litetouch ISO.
The above driver is very much part of set of network drivers on Dell website too.But it doesn’t work.
-Have also tried combination of network & storage drivers from Dell website (along with the above one mentioned ) injecting them into the MDT laptop boot image but no luck.
-Every time I make changes to drivers in boot image,I update deployment share & recreate boot image .
-This very litetouch iso connects to MDT deployments share for Dell desktop models 3010 & 3020 but have issues with laptop models E7440 & E7240. This means any connectivity or access issues can be ruled out. Also no problem with our image cause
this happens even with brand new shipped laptops with your inbuild win 7 OS.
-Have tried all options suggested on internet,tested all the drivers suggested but no luck.
-For example I tried latest E7440 netwrok & storage drivers ,Dell Win PE drivers,drivers from Intel website,etc individually as well as in combinations but the issue persists.
-If you google many express similar issues with these laptop models.
Though I used the drivers suggested by various bloggers,nothing worked for me.
Any help on this is appreciated.Thanks in advance.Hi,
I have several E6420, O3010 and since a week also some E7440 and E7240 on site.
I never had issues using the current Dell PE package for MDT.
At the moment my PE contains only the drivers from the Dell PE 3.0 package (WinPE3.0-Drivers-A13-D67JC)
and all my systems mentioned abobe have no issues connecting to the deployment share.
(btw: I have also some older E6400, E6410 and O390 I do no longer support, they
are supported by the pack Dell-WinPE-Drivers-A05.CAB according
to the Dell site, but I just started a deplymenst on a E6410 and is is also workign with just the latest PE pack)
I'd
suggest you start over with your deplyoment share using at least MDT2012 Update 1.
Create a folder "PE" under "Out-of-Box Drivers" and extract latest Dell PE pack and import he drivers there
Create a selection profile e.g. "PE Drivers" and include just the "PE" folder created above
When configuring the Windows PE settings of your deployment share select "PE
Drivers" selection profile for the driver injection in the "Drivers and Patches" to keep the PE image free of not needed drives. -
For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?
thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements. -
my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges
yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute -
I was working with many open tabs and firefox crashed. Now it won't connect to the internet at all.
Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I can connect my iPhone to my work wifi but when I try to connect my IPad it will not connect. It says safari can not open page. What's up with that I have used IPad connected to work wifi before
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Install stops. Log reads "Idle 40min with 1 open connection"
OK, I've tried this nearly a dozen different times and ways. Install begins normally and shortly after "calculating time remaining" changes to an actual time, the installation stops. The Installer is still running, but no progress occurs. The log file shows "localhost installdb [414]: idle 10min with 1 open connection"
The [414] number changes during different attempts, and every 10 minutes a new entry occurs. "idle 20min, idle 30min, idle 40min", etc. It goes on like this for hours until I quit/restart the Installer.
Now for the basics: Titanium PB running updated version of Tiger. 1Gig of RAM ... original Apple, installed at the factory. No peripherals attached. Have tried upgrade, archive and install, and erase and install.
I have also tried to install just the required files (no languages, printer drivers, or x11). I have run disk first aid, and there are no problems on my drive.
The DVD has been checked at the start of several (but not all) of the install attempts and all have passed.
The only thing that might be different/unusual about my computer is that I replaced my optical drive (original combo drive) with a new dual-layer dvd combo drive. But it was guaranteed to be Apple-certified. It's model MATSHITA DVD-RAM UJ-85JS.
Tomorrow I'll try to install using it in target-disk mode, but in the meantime, I thought I'd see if anybody else has any other ideas.
Thanks.I suspect the drive, but you might see if the DVD is dirty or has a thin oily film on it. Some have had this problem, and cleaning it made it work.
-
Whenever I connect iPhone 3GS to sync with Mac sync fails to open
Whenever I connect iPhone 3GS to sync with Mac sync fails to open. Brand new are there any upates I am unaware of?
"sync" fails to open? Do you mean, iTunes?
If you manually open iTunes, does your iPhone show up in the left column?
If so...
Click on your iPhone in the left column of iTunes.
Click on the "Summary" tab in the right colum of iTunes.
Scroll down to "Options"
Select "Open iTunes when this iPhone is connected"
Apply
My apologies if I misunderstood the question. -
I ripped a new CD to iTunes and backed up to the cloud. The songs are already on my iPhone 4S, but I can't get them on my iPad. I already connected the iPad to my laptop and selected "Sync with the iPad over Wi-Fi". On the iPad I forced a Sync. Help!
Try deleting and redownloading by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..
I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)? -
I was having issues with firefox so I upgraded to firefox 4. I am connected to the internet but when I open firefox or even internet explorer it says Unable to connect problem loading page. Nothing will pull up!!!
I don't know if you are still having the issue but if you are have you contacted your ISP? It sounds to me like it's more of a connectivity issue than a browser problem. I've dealt with similar things several times and in both cases it was something with the modem or an ISP setting.
I'm also wondering if it could be a Wi-Fi issue. Can you log in to your router? (It varies by brand but you would go to a site such as http://192.168.10.1. That is for Trendnet. The information for yours should be in the documentation that came with it.)
You should be able to get the router log in page to come up even if you can't connect to any websites. (Provided the network is set up correctly.)
I also would double check your connection settings (if you're connecting over Wi-Fi) or your ethernet connection. (If you're connected directly to the modem and router.)
Hopefully one of these suggestions will be helpful. -
Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.
Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
Also make sure you close all other applications except Logic to ensure it is not running in slave mode... -
Connect laptop with wireless printer
connect laptop with wireless printer
Umm, that's a little less information than we would like to be able to help you. Could you provide your MacBook model, printer, OS X version maybe?
Maybe you are looking for
-
HT203164 I need to know the steps to burn a cd with an iTune download ?
I HAVE BEEN CONTACTING APPLE ITUNES SUPPORT SEVERAL TIMES BUT THE ANSWERS DONT WORK OUT ON MY COMPUTOR (WINDON 7) AT AGE 78 AND NOT BEING TOO CLEVER ON COMPUTORS . I HAVPREVIOSLY DOWNLOADED AND MANAGED TO BURN SERVERAL CD'S AND IN THE PROCESS HAVE MA
-
I have a file on my desk top and in my iPhoto called .DS_Store and I can't trash it it just pops back up all the time. What do I do?
-
i activated the narrateur and now i can't disable it in fact i can't even go further than my lock screen i don't know how to use it is kinda weird, please if someone has the same proble or has a solution help me thank you
-
Hello, I was using iPhoto (*I just upgraded to Snow Leopard and am running iPhoto '09) just before I got the grey screen and "restart your computer" message. After restarting, I fired up iPhoto but it got stuck on the beach ball. I then looked up the
-
What are the possibilities of doing financial revenue forecast in APO along with demand planning?