Connecting LG KU990 Viewty to internet via bluetooth

My KU990 Viewty doesn't have the wireless feature of the iPod Touch or iPhone.
Using the built in browser or Opera Mini works over g3 but that's slow and expensive and should not be necessary when I am at home where I have a broadband connection.
So does anyone know how to set up the phone to share my internet connection via bluetooth, from my X-Modem, AirPort Extreme or iMac?
If you know, please explain the steps for me in a terms a dummy can follow!
Thanks guys.

I am afraid the long and short of it is you can't share your wireless connection with your Viewty. The phone doesn't have any Wi-Fi capability. You can use bluetooth to share data with your computer but you can't internet share over bluetooth with a mobile phone. In effect it would be pointless seeing you would have to be in fairly close proximity with your computer anyway.

Similar Messages

  • How do I connect my Centro to the Internet via bluetooth over PC's Internet? Where is Centro's PPP Connection Type? How do I setup Login Script for bluetooth connection?

    I am trying to set up bluetooth on the Centro to connect to the internet via my PC's internet.
    HotSync over bluetooth works successfully.
    Computer specs: Toshiba P205-S6277; Bluetooth Stack v5.10.04 (currently using); Bluetooth Monitor v3.01 (to use Vista's built-in bluetooth)
    I think I have narrowed my problem down to 3 things.
    (1) Finding Network Access properties (to allow connected devices to access the internet)
    (2) Finding Centro's Network Connection Type: PPP
    (3) Finding the correct Login Script to use
    for (1) I think I've looked everywhere; found nothing on Network Access. 
    Checked control panel: only Bluetooth Local COM
    Right-clicked bluetooth icon > Settings: File transfer, PAN Networking, PAN DHCP server, AV controls. Other bluetooth settings are for file transfer or object push. I don't see anything like this.
    I'm stumped on (2). It seems as if palm removed this option under Centro's Advanced network settings .
    Nearly all the forums that I read says to choose Connection Type: PPP.
    (3) Found 2 scripts that seemed would work. I don't know how it exactly works but it sounds workable.
    First script:
    Send: CLIENT
    Send: CLIENT
    Wait for: CLIENTSERVER
    End:
    Script 1 Connect Log:
    =======================================
    Connect Log
    S: client
    S: client
    R:
    Err: 0x121F   <<<netErrUserCancel b/c I canceled it. 
    Not connected
    ========================================
    I canceled it because the process would stay on "Signing In" then it automatically "Canceled" itself.
    Second script:
    Send CR:
    Delay: 1
    Send: CLIENT
    Wait For: CLIENTSERVER
    End
    **UPDATE** I found on this forum (Reply # 3689) that the script is needed only if you are using Palm OS 4 or under. Centro uses Palm OS 5.49121. Can anyone support this?
    Even without the script it has problems "Signing In".
    I'm currently reading this site and trying out its decribed methods. I will update this thread when I get the results.
    I'm using the Centro. And If anyone's been able to successfully connect to the internet on the Centro via a bluetooth connection to the PC WITHOUT 3rd party applications, please share.  If not, please share any ideas.
    Thanks!
    -Eric
    Post relates to: Centro (AT&T)
    Message Edited by naisanza on 01-01-2009 02:26 PM

    I've been going at this for days, and have probably exhausted all the proposed solutions on the first 3 pages of various google searches. I'm getting the feeling that Vista users are pretty much SOL for the time being.
    For the record, I just tried out a few of the solutions (mRouter & SoftickPPP) on XP and they work perfectly.
    Post relates to: Centro (Verizon)
    Message Edited by Cogwheel on 02-13-2009 09:45 AM

  • Connect iPhone to Internet via Bluetooth

    I have a computer set up sharing ethernet internet connection via bluetooth. How do I connect iPhone to the Internet via bluetooth? (No cellular network, no wifi)

    I have a computer set up sharing ethernet internet connection via bluetooth.
    How do I connect iPhone to the Internet via bluetooth? (No cellular network, no wifi)
    You cannot. There is no network connection available TO the iPhone over bluetooth. When tethering becomes available, you will be able to tether your laptop using the iPhone as an Internet connection, but not the other way around. The iPhone CAN use wifi for its internet feed though, but not bluetooth. Bluetooth only supports headsets today.

  • Why can't I connect to samsung or htc device via Bluetooth?

    Why can't I connect to samsung or htc device via Bluetooth? or can't copy any picture or song from my laptop to Iphone 5?

    Because this has never been a feature of iphone/ipad/ipod touch.
    Ipod touch/iphone/ipad support bluetooth for handsfree telephone devices, stereo speakers/headsets, some keyboards, some peer-to-peer apps form the app store, and internet tethering where provided by the carrrier.
    Otherwise, they will not connect to another phone/device/computer.

  • How to connect my macbook air to internet via cable ethernet?

    Hi,
        I tried to connect my macbook air to internet via lightning to ethernet adaptor. I am having cable internet, and my windows laptop normally connects to internet without anything to set in it. Anyone can help in this aspect...
    Thanks in advance..

    Finally, it got connected....
    The solution is, may be simple, but it took 3 days...
    Switch off (plug out the electrical connection to the modem), and power again the cable modem...
    it got connected...
    Thank you Diesel....

  • I am unable to connect my ipad to the internet via wifi, when asked for my password I get message "unable toI ge join network" however my laptop is able to access the internet using similar procedures and in the same physical location.?

    I am unable to connect my IPad to the internet via WiFi, when asked for a password then attempt to join I get the messag "unable to join the network" however  if I use my laptop in  the same physical locationand using similar procedures I am able to conect.?

    What router are you using? make/model/version
    What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
    If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

  • I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?

    I am unable to get my iPhone 4s to connect with my JBL Flip speaker via bluetooth anymore. I have been using it for 2 months and now it just wont find device. Any ideas?

    Where exactly did you buy this phone?
    Have you tried contacting your phone carrier to activate the phone?
    Do you have a sim card?

  • HT204387 how to connect iphone 4s to other iphones via bluetooth??????????

    how to connect iphone 4s to other iphones via bluetooth??????????

    Asked and answered at one of your other posts.
    https://discussions.apple.com/message/25174543#25174543

  • Want to connect my ipod to another ipod via bluetooth ????

    want to connect my ipod to another ipod via bluetooth ???? and send and reciev files can i do so ????

    You can with this app. There may also be other apps too.
    App Store - Bluetooth FileShare
    Connie99, be careful when you say there are no solutions.

  • I am having trouble connecting to my in-home internet via wireless router. It says it is connected, but when I try to open email, no connection is found. This also occurs for Safari and Facebook. I am connected by Charter Cable.

    I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable.  This only occurs on my IPad. My desktop works fine.

    Although it may ultimately be necessary to perform a Factory Default Reset on the AirPort Extreme and start over with a new configution, we can first try to see if things will work with the existing settings on the device.
    Push the reset button (if present) on the cable modem
    Power off the modem by pulling the power cable
    Remove the internal battery from the modem (if easily accessible)
    Power off the AirPort Extreme and every other device on the network....order is not important
    Wait at least 20 minutes....longer is better
    Re-install the battery in the modem if it was removed previously
    Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme
    Power up the modem and let it run 4-5 minutes buy itself
    Power up the AirPort Extreme and let it run 4-5 minutes
    Then power up each other network device one at a time about a minute apart
    Check for a good Internet connection on the network with all devices
    If still no luck, you will need to perfom a Factory Default Reset on the AirPort Extreme as follows:
    Pull the power plug from the back of the AirPort Extreme
    Hold in the reset button and keep holding it another 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
    Release the reset button and allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
    Then open AirPort Utility end reconfigure the AirPort Express again.

  • Problem connecting Dell Inspiron 6000 to internet via Time Capsule.

    Hi,
    Unable to connect Dell Inspiron 6000 to internet via Time Capsule.
    I get this "Windows is unable to connect to selected network. Network may no longer be in range". Any clue?
    Thanks.

    What modem do you have?
    Is it a router? What mode is the TC being setup in, bridge or router?
    Is it cable modem? If so did you power cycle the modem for the required time.. it might be 30min or just 5min or many hours depending on the ISP.
    Tell us more.
    For mavericks please ensure your network connections have ipv6 set correctly.. ie link-local.

  • HT204368 Is there a way for me connect my Iphone 5 to Itunes via Bluetooth I dont have my cable right now. Is there a way please help

    Is there a way for me connect my Iphone 5 to Itunes via Bluetooth I dont have my cable right now. Is there a way please help

    Not via Bluetooth. You can connect over Wi-Fi, but this needs to be configured when the device is connected with a cable.
    tt2

  • How to share internet connection from macbook pro to ipad via bluetooth connection

    can anyone guide me how to share my internet from my MBP to Ipad (gen-1) via bluetooth connection....???
    i can't share my internet via Wifi...
    because my internet always been cracked by someone if i'm sharing throught wifi...
    pleaseeeeee....
    help me.....

    You just need to enter system preferences, open the tab share, and there you can choose the option "share internet". Then you select the way you want to do it and that's all.
    PS.:I'm Spanish, excuse me for the lenguage or the ortographic faults

  • Need help connecting to Internet via bluetooth'd cell phone

    I have my iBook connected to my cell phone (i-mate K-jam) via bluetooth and I'm trying to figure out how to connect to t-mobile gsm so I can get to the internet. I can access the net with my K-jam by itself, I just can't figure out how to do it with my iBook. Has anyone done this and do you have a step-by-step???
    Thanks,
    Tom

    Fixed it! I followed this: http://www.howardforums.com/showthread.php?p=6184897#post6184897 The key was to put a fake user name and password. Even though Tmobile doesn't require it, I had to put something in. d for user and u for password works...anything will work.
    Tom

  • Connect to Internet via Bluetooth with 6121 Classi...

    I have a new Nokia 6121 Classic and a Thinkpad T60 with the latest Bluetooth drivers and Windows XP SP2.
    I've installed the Nokia software and it asked to get the updated software from the Internet and installed 6.86.9.0
    It connected fine via Bluetooth (WIDCOM) and I'm able to Sync my contacts/transfer files without any problems. I then throught I'd connect it to the Internet. I tried the cable connection and it connected fine via 3G to my carrier Optus.
    However, if I don't use the USB cable and try via Bluetooth (what I want) it starts to connect and says 'Looking for bluetooth devices'...which is really strange since it's already connected !! Windows XP beeps quickly as if something has been plugged into a USB port, but nothing has. After about 20-30 secs, Windows XP beeps (as if something has been unplugged, but nothing has. The Nokia Connection Manager then says "No modem found!"
    It's so strange...it can see the Nokia phone fine via Bluetooth. I then tried to connect via "My Bluetooth Places" and XP also connected fine to the phone. It then installed another dialup connection via Bluetooth. But if I click on that icon, it connects to the phone but then asks for a userid/password which I have no idea what to enter. So I think I need to use the Nokia PC suite, but it won't connect to the Internet via the phone, unless I use the USB cable.
    It's a strange one... I've searched the forums but can't see any clues for my particular case.
    Daz
    PC Connectivity Solution:
    Version 8.15.0.0
    [Nokia Connectivity Cable Driver:]
    Version 6.86.11.0
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 2
    Language: English
    Language for non-Unicode programs: English
    Detected Internet browsers:
    - Microsoft Internet Explorer 7.0 (Default browser)
    - Mozilla Firefox 2.0
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 2180)
    - Broadcomm (Version: 5.1.0, Build: 4700)

    For anyone who's interested I solved this by:
    - Edit the Phone number for the bluetooth Modem and entering *99#
    - For the modem, setting it's Maximum speed to the highest. In my case it was 921600.
    - Go into Control Panel - Phone and Modem Options - Modems - Select Bluetooth Modem - Properties - Advanced tab and enter at+cgdcont=1,”IP”,”internet”
    Dial the connection by going into My Bluetooth Places and double clicking on the icon. When prompted enter a blank userid and password. It should then connect to the Internet via your mobile !
    Daz

Maybe you are looking for

  • SENT MAIL NOT APPEARING IMAIL

    I have had the same gmail account for nearly 7 years. I have always used it with the apple mail program (IMAP). Suddenly in the last couple of days my sent mail has totally vanished (except for nearly 300 messages that seem to be pretty much just fro

  • Return thread's runtime?

    Is there anyway to get the runtime of a thread when calling the start() method? My intention is to kick off a number of threads, have those threads run in parallel and finish, then output some sort of report about which thread completed in the shorte

  • HT5621 my apple id  said  to be disbled, how can i make it  enabled?

    when i  updated my new applications on my i phone 5s, it said  my apple id is disabled,  how can i  change disabled  to enabled position. i want my applications  updated.

  • [Tomcat bug?] Calling response.sendError(404) from JSP

    Calling "response.sendError(404);" from JSP context causes Tomcat to mangle all non-latin characters. Any ideas why? How to recreate bug: http://www.kitoy.ru/int/bug1.zip There are 3 files in bug1.zip. index..jsp: <!DOCTYPE HTML PUBLIC "-//W3C//DTD H

  • JVM 1.4.1_01 crash in awt_getBIColorOrder

    Our site has developed a nasty crash problem using some of the newer JVMs. There is an intermittent JVM crash running on Windows NT4 SP6a as well as Windows 2000 SP3. Basically, it looks like native JVM code is segfaulting. No exception is printed to