Connecting logitech clearchat headset to soundtrack pro, help?

I'm trying to connect up a logitech clearchat PC wireless headset so I can record some V/O's.
I can't see it in the recording panel or in the configure dialogue box.
In the system prefs, I see it under Input and Output.
Help please?

came across your post. Did you manage to get it going. this is what i did-under configure device(top right), i chose " the bluetooth headphone device(not logitech in my case) as it appeared there. Then under "monitor", i chose the headphone and it worked.

Similar Messages

Getting Logitech Clearchat Headset to record.

Hi, I have a Logitech Clearchat Headset (usb) and am trying to record sound with it. I can get sound into it music etc, but I cant record. I use asoundconfgtk to change from my default soundcard to Headset. That allow me to listen, but I still cant record.
I cant record using gnome-sound-recorder or audacity. Here is the error I get when I set audacity's setting to output: Alsa Default Input: Alsa Logitech USB headset USB audio HW:2.0
Heres twoscreenshots
http://farm3.static.flickr.com/2657/371 … 1e4d_o.png
http://farm3.static.flickr.com/2589/371 … 2fe5_o.png
Last edited by kylepotts (2009-07-13 14:39:38)

On the top right of your audacity screenshot, select one channel from the box there.

Soundtrack pro help needed

I know this isnt the right section but I am not getting any response in the soundtrack pro section and was wondering if someone who used fcp could tell me the best way to knock out the back ground traffic noise in a tape, like they show you when they take out the boat noise and just have the vocals. Any help would be appreciated

If it is a steady sound of traffic such as a freeway -- so a white noise of sorts -- then you can probably get good results in STP. I just checked and the instructions for noise reduction are on page 168 in the STP user manual. It explains it better detail than I can. If you have horns honking or really sharp, vivid sounds then it will be impossible to do much.
Dual G5/2.5GHz/4.5 GB, internal ATA, G-SATA 500 Mac OS X (10.4.6) Final Cut Studio

Connecting HDR-FX7 camcorder to Macbook Pro help

I have a Sony HDR-FX7 Camcorder. To capture footage it needs an HDV/HV-i.Link cable. The only problem is, (I think) that this doesn't connect to a macbook pro 13inch laptop.
So my question is, what cable(s), what adaptor, if i need one, do I need to connect these.
Here are the ports for my macbook: http://support.apple.com/kb/HT3627
Please help me out. Talk to me like I don't know anything about computers, I would be so grateful.

Hi everyone, I picked up on this thread as I am having similar problems with my Sony HDR FX7 camcorder and how it communicates with the latest MAC Book Pro. I have the 9 pin cable referred to in earlier posts, but my new MAC Book Pro does not seem to recognise my camera? I am using Final Cut Pro to edit a video captured by my camera.
In my previous MAC Book I used iMovie to successfully access the video through my MAC, but it doesn't seem to work on the latest MAC Book Pro (or does not recognise the camera)?
Has anyone got any suggestions please?
many thanks

Audio Error with Logitech Clearchat Headset (USB)

After doing the monthly recommended battery recharging overnight, I had upon startup with my Logitech USB Clear Chat headset plugged in an audio error--a grayed-out apple icon in a gray box in the center of the screen, and a recurring beep-beep-beep which defaulted to the internal speaker when I detached the headset. With this icon and sound I had no way to change audio settings--it kept popping back to maximum. I rebooted without the headset and had the same problem, but the noise AND recognition of audio devices (even internal) disappeared with a safe start-up. I could reboot normally and had audio with internal hardware fine, but the beep-beep and icon pop up again if I put in the headset. Running the diagnostic utility discovered no problems with the machine, and the headset works fine on my PC (and was fine on my Macbook until today).
Thanks for you help!

' orangehat I sincerely hope you (we?) get an answer on this one! I ordered exactly the same headset the same time I did my 17-inch MBP. Still waiting for everything to be delivered - so can't say as yet whether I have the problem too. Hoping not.
' Hoping there's an answer to your question anyways so I can get an idea of things before my kit lands (IF that EVER actually HAPPENS!!!)
~Menageryl
-Jack of All Trades, Master of Some!-

HT3887 can i connect bose headset to macbook pro?

can i connect a bose headset to macbook pro?

I connected my Sony headphones to my MBP with no issues.

Audio output using Logitech Clearchat Pro USB headset sounds like chipmunks

I use a Logitech Clearchat USB headset for online meetings daily. On my previous machine (Black MacBook 2GHz) the headphones and mic worked fine. I just upgraded to a new 2.66 Unibody MacBook Pro and while the microphone works fine but the audio in the headphones sounds like chipmunks. If I switch the audio output to the speakers, the audio sounds fine.
Logitech claims that since the drivers the headphones use are built-in, it's not their issue. I'm curious if anyone else has experienced this problem and how I might be able to get it resolved.
Thanks.

' orangehat I sincerely hope you (we?) get an answer on this one! I ordered exactly the same headset the same time I did my 17-inch MBP. Still waiting for everything to be delivered - so can't say as yet whether I have the problem too. Hoping not.
' Hoping there's an answer to your question anyways so I can get an idea of things before my kit lands (IF that EVER actually HAPPENS!!!)
~Menageryl
-Jack of All Trades, Master of Some!-

Soundtrack Pro 2 keeps crashing...please somebody help :(

So here's my problem.
I am running Soundtrack Pro 2 on my Mac Pro along with my Digi003. Both Final Cut Studio 2 and Logic Studio 8 are installed on my computer. Every application works fine except for STP2 that keeps crashing all the time.
I tried to uninstall it, reinstall it, reinstall Compressor, downloaded updates, Core Audio updates as well for the 003, downloaded the last Pro Applications Support but nothing seems to cut it.
The issue is as follow. I launch STP, the application scans (for the hundredth time) my plugins and detects something like 287 plugins. HOWEVER, the application crashes when the counter goes to 290.
My personal feeling is that the problem might come from either a conflict between Final Cut Studio 2 and Logic Studio 8 that installed both STP2 or, most likely, three plugins (the difference between 290 and 287) that STP2 has a problem with.
These last plugins scanned seem to be Amplitube X-Gear, a demo I deleted, Melodyne, that I downloaded lately and I guess something else. Also, I precise that I have not been able to rn STP for almost a year and as I am about to work on the post of a new film, I would love to use it.
The last thing I did was running the Terminal app that gave me a detailed report of the problem. I don't understand where it comes from though. So here's the report. If somebody can help, I greatly appreciate it!
Terminal Report :
Last login: Tue Nov 4 12:04:29 on console
/Applications/Soundtrack\ Pro.app/Contents/MacOS/Soundtrack\ Pro; exit
Welcome to Darwin!
romain-battaglias-computer:~ Romain$ /Applications/Soundtrack\ Pro.app/Contents/MacOS/Soundtrack\ Pro; exit
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x740073; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x2f003c; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
1
2
Soundtrack Pro(501,0xa000d000) malloc: * Deallocation of a pointer not malloced: 0x10d8b000; This could be a double free(), or free() called with the middle of an allocated block; Try setting environment variable MallocHelp to see tools to help debug
IKDriverAPI::Allocate
IKDriverAPI::IKDriverAPI
IKDriverAPI::Connect
IKDriverAPI::Disconnect
IKDriverAPI::Free
com.apple.soundtrackpro
2008-11-04 12:34:19.153 Soundtrack Pro[501] NSExceptionHandler has recorded the following exception:
NSUncaughtSystemExceptionException -- Uncaught system exception: signal 11
Stack trace: 0x95a5c521 0xffffffff 0x9011072c 0xffffffff 0x2949295d 0x90ccf800 0x90ccf7da 0x90ccece2 0x90cd4354 0x0016a859 0x0016aad3 0x0016be76 0x0016c3bb 0x0016b527 0x9326fc9f 0x9326f8fc 0x9326ee45 0x93266479 0x93265ea9 0x93265b0a 0x95f2fd2d 0x95f2fff0 0x95f2ff10 0x0016dbc6 0x0016b4a6 0x0027fab4 0x927f2237 0x908553d2 0x9084cb51 0x927ea7c8 0x927f1769 0x9327a976 0x9327a860 0x9327a35d 0x93279f28 0x927f7f21 0x927f7d4b 0x915226c5 0x915225f6 0x915224c2 0x92df5084 0x9327811d 0x93277b37 0x932718c4 0x95e011b3 0x0027d129 0x0000352e 0x00003455 0x00000001
2008-11-04 12:34:19.153 Soundtrack Pro[501] Exception raised during posting of notification. Ignored. exception: Uncaught system exception: signal 11
Killed
logout
[Process completed]

Probably an imcompatible plug-in.
Try renaming the plug-in folder momentarily, see if it boots okay.
If it does then you'll have to isolate which plug-in is causing the problem.

Cannot get Logitech ClearChat Comfort USP headset to work on Leopard :-(

Hello,
I upgraded to Leopard from Panther recently and have had nothing but problems ever since. I have become a part time computer tech support person (in addition to my full time day job). To make Leopard work smoothly on my Powermac G5 is an endless struggle....
The current struggle is trying to get my brand new Logitech ClearChat Comfort USB headset to work with Leopard. Googling this issue is bringing me very bad news: that Logitech and Apple do NOT communicate or cooperate, and each company refers frustrated end users to the other company for help--to a problem that has no solution.
Is it in fact true that all USB headsets now don't work on Leopard!? I find this unbelieveable if true--given the zillions of humans using Skype, for example, and how heavily relied upon is communicating internationally or long distance via Skype on a PC or Mac. Why can't Apple and Logitech get their act together and provide drivers and solutions so we can simply use a headset with our Mac?
Right now I have 5 month old (new in my opinion) Logitech headset that somebody recommended I buy to use on my Mac computer--and I can't get it to work, and there does not seem to be any driver for it.
Please if anybody can give me helpful advice, or a solution to this problem I'd appreciate it greatly.
PS: as in interesting sidenote I thankfully have a Sony Vaio notebook. Guess what? All I have to do is plug the headset into the notebook and can away I go to Skypeland, never any problems. Can't say the same about my Mac....always like pulling teeth to get anything to work on this boat anchor
My next computer will be a PC, I'm sorry to say....don't want to be a part-time computer engineer...too much work to do....

Generally, if I see a requirement of OS X 10.4 or later, the device will work under Leopard. Requirements of 10.3 or earlier tend to mean getting the device to work under Leopard is hit or miss.
With that in mind, how did you upgrade to Leopard? Did you use the Upgrade option or the Archive & Install?
It's up to Logitech to make sure their devices work properly with the operating systems, not Apple's.
~Lyssa

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

Soundtrack Pro making a LOT of files - used to working in Logic, need help

So I'm used to working with Logic Studio/7.2/etc, and it's my first foray into working with Soundtrack Pro at work. My questions are this: When I use the razorblade tool (since I can't find an equivalent to the split tool in logic) in soundtrack to cut up a sequence, it seems to be creating a LOT of extra files:
http://www.1217design.com/pics/stp_question.png is an example of what I mean. Is this supposed to happen? The recorded files themselves were done in FCP and sent to Soundtrack Pro via the Send to STP Multitrack session function.
What I'm trying to find out is: Is this supposed to be happening? How can I stop this from happening? Are all of these extra files necessary in order to export the final project? And what will happen if I delete them?
I just want to know because the folder is now 4.71gb for a 30 second audio file (the final aif export is roughly 30mb), and there's over 200 of these extra files that have been created in the process of working on this project.
If this is what is necessary to work in Final Cut then I won't be able to work with FCP due to size issues (which is a shame as I feel so much more comfortable working within that environment than I do working in FCP).
Thanks for the help in advance,
Sean

Sean A wrote:
By doing this, will it still create all of those extra files? That's what I'm trying to figure out. Is it just from the blade tool being used?
For all edits, yeah, baby, STP will generate more files than cows create methane.
First, I know what works for me, but I'm still learning, so I strongly encourage you to keep a COMPLETE BACKUP of all projects until you know your workflow. Also, you may have Preferences set up differently than I do, so you may not find the same paths as what I describe here.
When you have an audio file the way you want it, and you're confident that you won't need those edit files again (be SURE) Process > Flatten All Actions (or Audible Actions) and Save that audio file. Then -- as I understand it so far -- you can safely trash all the edits related to that file. (If you use Photoshop or similar visual programs, it's the same idea.)
During my first few weeks of intensive STP work, my drive grew more and more sluggish, for no reasons known to me. I saw disk space shrinking rapidly. Finally I figured it had to have something to do with STP, so I started searching and eventually I found my edits piling up in home/Documents/Soundtrack Pro Documents, especially (for me) in Edited Media. Since they all came from projects I'd finished and exported to AAC and MP3, I was comfortable trashing them all. Suddenly, whoa, I had an extra 12 GB of disk space available.
Just keep those edit files until you are CERTAIN that you know what you're doing and that you're DONE. Otherwise, when some project needs one precious little 3MB turn of a phrase, you may find yourself confronting suicidal or homicidal tendencies.
I welcome further clarification and/or correction from people who know more and can explain it better.
Best,
chuck

Help Connecting Older Sony HandyCam to MacBook Pro

I have an older Sony HandyCam which I have not used in years. Trying to connect to iMove 6.0.3 and can not get the camcorder to mount so I can import. Using USB connection since my MacBook Pro does not have firewire. Help?

Hi
What Sony HandyCam do You have ?
Is it a miniDV tape Camera - if so it only can connect via FireWire.
What MacBook Pro - Do You have ? - Never seen one without FireWire - but on later models there are only a FireWire 800 connector.
MacBook Air and some MacBooks don't have any FW-connector - but MB Pro used to have it as far as I know.
If it has a FW800 - connector - then You need a FW 4-pin to FW-800 Cable - the FW400-FW800 adapter is not my favorite solution.
Yours Bengt W

I have soundtrack pro version 3.0.1 and since I've updated my osx to lion it does not work. Help!!!

I have soundtrack pro version 3.0.1 and have recently updated the osx to lion and now soundtrack pro does not open. Please Help!!!!

Slide the camera button up

URGENT- I need help: Soundtrack Pro Freezing Problem!!

I just sent my FCP project to a multitrack project in Soundtrack Pro, but when i want to work on the Soundtrack Pro project, everything keeps freezing. its dead slow!
i can barely do anything with it!
whats the problem? and how can i solve it?

Couple of possibilities. One, your media files are huge. STP reference the entire media of a clip edited in FCP . . . not just the edited portion. That can result in some large files being brought over. Also, when you send a clip over, use the base layer option if you can, or export an mp4 to bring in to STP.
If you're ready to do the post audio work on a finished FCP project, export an omf file. Close FCP, then open the omf file in STP. That can help.
Other "obvious" but still good to review considerations . . . have enough RAM? Is there enough disk space? Are you using a different media drive than where the system is located?

Help! My Canon MG5520 printer is apparently not connected to my late 2013 MacBook Pro!

Help! My Canon MG5520 printer is apparently not connected to my late 2013 MacBook Pro! I have had this printer a few months and everything has been working fine until today. I did I have to turn my wifi router on and off this morning, so I think that might be it. I'm not extremely tech savy, so if anyone could lend a hand, I would appreciate it!! I've tried unplugging it, turning it on and off again, quitting it my from laptop, nothing works. Do I need to reconnect it to the wifi? How do I do this? I turns on fine and doesn't give my any error messages, it'st just my laptop that says it isn't connected. Sorry if this is a stupid question.

Thanks for providing complete information. It seems like you've ruled out faulty docking cable, bad USB port, and software issue on the new Mac. And since the shuffle still works fine on the older Mac, it's not a problem on the shuffle.
Some things to try...
Connect the MacBook to its power adapter, so that it's not running the battery power. If any other USB devices are connected, try connecting the shuffle as the only device, to a direct USB port on the MacBook.
If you can keep it connected for long enough, go to the shuffle's Settings screen in iTunes and set it to Enable disk use (and Apply). This will keep the shuffle's disk mounted continuously, instead of iTunes unmounting the shuffle's disk when not syncing.
If you happen to have an old USB 2.0 hub that has its own power supply, connect the shuffle through the hub to see if that make any difference. The new Macs have USB 3.0, so if that's the cause, maybe a USB 2.0 hub in between can act as a "buffer" and make it work.

Connecting logitech clearchat headset to soundtrack pro, help?

Similar Messages

Maybe you are looking for