Connecting MAC and PC to Airport Express

We have a MacBook and an HP PC--
Is the AE print server compatible with an HP C3100 printer (didn't see it on the iFelix list)?
If so, will the PC be able to see it on the network?
Thanks for your help--

Is the AE print server compatible with an HP C3100
printer (didn't see it on the iFelix list)?
The HP driver does not work, it may work on the Mac with another Gimp driver, but this does not always work.
Use the process outlined here:
HP Printers (and others) not on compatibility list and Airport Extreme Printing
http://www.ifelix.co.uk/tech/1300.html
Using the Gimp-Print drivers, you will need to choose another driver, start with the PhotoSmart P1100 and see if that works.
If so, will the PC be able to see it on the network?
Actually you may find it easier to print from the PC... and it may work from the PC even it doesn't from the Mac.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

Similar Messages

Setup wireless network for mac and pc with Airport Express?

Mac Mini/OSX/10.8.2/Airport Express
Question,
I have my AIrPort Express setup for my Mac Mini and I have dell computer that I want to share the wireless network. Is it possible to setup a wireless network with my mini and the pc using only the AirPort Express? Is the Airport Express a wireless router?
Thanks,

If your Mac Mini is connecting to the Express using wireless, then this confirms that the device is working correctly.
The Express is a wireless router that can support up to 10 wireless connections, so your Dell computer should be able to connect assuming that its wireless card is working correctly, and the Dell indentifies the network and enters the correct wireless network password.
If you are having difficulty with the Dell PC connecting, this Windows troubleshooting document might help:
http://windows.microsoft.com/en-US/windows/network-connection-problem-help#netwo rk-problems=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

Found a fix for printing from Mac and PC using Airport Express!

I hope this helps somebody else because it's taken me hours and hours of frustration to trip over this solution. I have a MacBook, Airport Express and a Windows XP PC. Internet worked fine but I could not print form the PC via airport. I tied all the various links from iFelix (thanks to him for what sure seems like a lot of work to help others) but they didn't work. Here's what did...
To setup a printer using the Bonjour Printer Wizard:
1. Download the Bonjour for Windows installation package from the
Apple site http://www.apple.com/macosx/features/bonjour/.
2. Install Bonjour for Windows by launching the BonjourSetup.exe file from the folder where place it was downloaded.
3. Start the Bonjour Printer Wizard either by clicking its icon on the desktop or by selecting Start -> Programs -> Bonjour -> Bonjour Printer Wizard.
4. Follow the installation steps until the Install Bonjour Printer screen appears.
5. In the Install Bonjour Printer screen, select Generic in the Manufacturer list and then Generic / Postscript in the Model list. This step is the same for any printer model you have.
6. Follow the rest of installation steps.
The key is the Generic and Generic/Postscript settings. I also set up the Parallels program on my Mac. These instructions come from their documentation. It's the only thing I've found that works. Hope it helps some of you!

Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://tech.ifelix.net/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://tech.ifelix.net/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://tech.ifelix.net/1012.html

Connected Mac and PC to Airport Extreme

I have an Airport Extreme and a cable modem/internet connection. I have the Airport set up via Ethernet to the cable modem and my iMac(my Mac is old and does not have an airport or wireless card), but the PC will not connect or get an IP address from the Extreme if I put security on the wireless network. I have found guides that tell you you need to get the full hexadecimal key to enter into the PC as the password but am unable to find it on my Mac.
Please help.

2- I tried just connecting an ethernet cable directly between my Mac and PC and set up static IP on both but for some reason it does not work, but it works fine via the router, could this be because direct connection requires a crossover ethernet cable ?
How old is the PC and does it use gigabit.. with gigabit you do not need crossover cables.
However the two computers can get confused about negotiated speeds.. so set exact speed on each computer.
Set both to gigabit. Full duplex and see how that goes.. assuming a good quality it cable it should work.
If the max speed of the PC is 100mbit then reduce the speed in the Mac to the same.
If you do this kind of setup you also need to set static IP in the correct range .. but you need to NOT set gateway and DNS in the PC.. in the Mac on the other hand I have found they tend to like the gateway and DNS set.. but you use the same one as the airport extreme uses.
1- Is there any latency added when computers are communicating to each other, in my case a Mac and PC, via the airport extreme ?
No, the latency on ethernet networks is tiny.. and transfer speeds on gigabit are identical .. using the router is much easier than messing about with direct cable connections.

Connecting Mac and PC to Airport Extreme

Trying to migrate some files from a PC to a Macbook and am having trouble. After many failed attempts, it seems to me the best way is to connect both the PC and the Mac directly to the Airport Extreme. I am asking if this is possible, will it work to move the files from the PC to the Mac and how to set it up correctly? Below are details on setup now, problems and various solutions, although just showing me how to attach both a PC and a Macbook to the Airport Extreme, is my primary need now.
NOW - The PC connects directly with Ethernet Cable to Airport Extreme. Airport Extreme connects directly to the ISP provided Cable Modem. The PC also connects directly to a Printer with a printer cable.
The Mac connects by Wireless to Airport Extreme (and Internet) and to to the Printer.
This arrangement is a result of the PC, more or less, falling apart. The PC wireless connection usually will not connect or fails, therefore I opted to use the Ethernet connection. By necessity, a D-Link is used in place of the two broken USB connections on the PC. Due to condition of PC, I prefer to leave everything as it is since it's working so far.
POSSIBLE OPTIONS - When I looked at various ways to move the files from PC to Mac, it seemed best to use an external hard drive, but I've not tried that yet since I am not sure how to change the drive's PC format to the Mac format without losing, in the process, all the files copied from the PC. I bought a new external drive that is supposed to work on a PC or a Mac, except that, with this PC,there is no assurance the drive will work. Two others I used as backup drives no longer can be found by the PC.
I tried to set up a network with the PC and Mac, but never succeeded.
Also, tried the file sharing instructions and never succeeded in that. In both cases the Mac just did not show up on the PC network places, nor does the PC show up on the Mac, despite my following instructions as well as I could.
That is why I would like to take what seems to use a more direct route to get the files I want from the PC to the Macbook.
Thanks in advance for any help you can provide.
Don

Please check out this excellent article by iFelix on sharing files between PCs & Macs: Sharing files between a Windows XP PC and a Mac running OS 10.4.x

Mac and PC sharing airport express - help!

This is possible, right? I have successfully set up the airport express from my ibook, but now i'm trying to connect a PC with Windows XP to it and it's not picking up the wireless signal. Suggestions please?

Mike
Rather a late follow-up, but I'm hunting for clues.
I'd be interested to know how you managed to enter 26 hexa characters for the password. I have an XP machine I'm trying to connect to an ABS. I first tried entering the 13 char Ascii password. It entered, but didn't produce the connection. Then I got the 26 char hexadecimal version from Aiport Admin, and tried to enter it. I got to 13th char, then the password field refused to accept any more characters. I thought for a moment the keyboard had died. No. The password field just refused to take more than 13 characters.
So, what's the secret to getting all 26 in as a hexa password? In which window/screen could you enter the password?
Problem machine is running XP Home with SP2.
Regards
Ken

Connecting macs and pcs together through airport express

i have had my first mac ibook for just over a week and have also bought an airport express thingy. my daughter has a windows pc laptop. is it possible to connect them both through the airport express so we have a wireless connection to each? i am pretty new to the whole apple mac and wireless business and dont understand about settings and putting codewords and numbers into the boxes that might pop up.
anne

Hi Anne,
Welcome to Apple Discussions
By connecting them you mean to have them both receive signal from the Airport Express to access the internet rather then make a connection for file sharing.
If that is the question, Yes you can. The easiest way of doing this is to set it up on the iBook G4 using Airport Setup Assistant. It will walk you, or your daughter through setting up the Airport Express. You want to assign it a password and your basically done except for your Windows PC. Does your Windows PC have a wireless card? Can you access the internet already? What you are going to need to do in order to connect to it is to join the network like you would any wireless network. I am not a Windows user (I try not to use them as much as possible), so I can't really help you with the Windows aspect of it.
You can also setup the Airport Express using your Windows PC, but I think it would be easier on the Mac.
You may want to look at the following...
Knowledge Base Document #166609, which will help you decide What kind of network do I want to setup (Mac)
Knowledge Base Document #163112, which will help you decide What kind of network do I want to setup (Win)
Knowledge Base Document #163103 on Setting up your AirPort Express or AirPort Extreme Base Station (Mac/Win)
Knowledge Base Document #106424 titled AirPort: Joining an encrypted wireless network
Connecting to the Internet using AirPort
Knowledge Base Document #108058 on Choosing a password for networks that use Wired Equivalent Privacy (WEP)
Jon
Macbook 2.0 White (100Gb HD 2Gb RAM) Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

HT5211 My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details.

I have an Ipad and Iphone but I don't have an Airprint, only a WIFI printer,my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ?

I have an Ipad and Iphone but I don't have an Airprint at home but only a WIFI printer, my question is if I connect the wifi printer to Airport express, can I print from Ipad and Iphone ? Please help me if anyone knows about this.

Unfortunately, connecting a non-AirPrint-enabled printer to an AirPort base station's USB port will not make it AirPrint-ready.
You will need to use another solution, like Printopia, to be able to print to this printer from an iOS device.

I stay in hotels alot and use my Airport Express to hard wire into hotel network. But hotels seem to have a sensor that will not allow any other device like my I-phone, I-pad to connect. Just one device and that's it. Is there a setting to cure this?

I stay in hotels often and use my Airport Express to hardwire into the hotel's network. This seems to work fine and allows my Macbook Pro to work wirelessly.
The problem is I cannot then hook up my Iphone or Ipad to the network. It seems the hotels have a sensor and only allow one device on their network at a time. Is there a setting in the setup of my Airport Express that might fix this problem?

If you have the AirPort Express setup in Bridge Mode, try changing the Connection Sharing setting to "Share a public IP address"
AirPort Utility - Manual Setup
Click the Internet icon
Connection Sharing = Share a public IP address
Update
You will probably get a message about a Double NAT error. Click to "ignore"
This setting might allow mutliple devices to connect and may not. It's worth a try...I have about a 60-70% success rate at hotels with this setting.
Unfortunately, as you note....hotels have become a lot smarter about connections to their network. At some point, they probably will not even allow another router to connect at all.

Anyone has an idea how to connect and configure my Airport express to an internet range extender which is plugged into mains

Anyone has an idea how to connect and configure my Airport express to an internet range extender which is plugged into mains?
Message was edited by: m. emin

You can connect it but with ethernet cable. You can not connect it by wifi to extend the range a second time.
BTW AE is rather sensitive to connect by wifi to non-apple wifi routers.

I have recently changed my bt home hub and now my airport express won't connect to it? Any suggestions?

I have recently changed my bt home hub and now my airport express won't connect to it? Any suggestions?

Anytime you change out a modem or modem router like the HomeHub, the AirPort Express needs to be reset back to factory default settings and then set up again.
The reason for this is that the Express is retaining some or all of the settings to connect to your "old" modem or hub, so it will not work correctly with a new device unless you start over again from factory default settings on the Express.
Power up the Express for a few minutes
Hold in the reset button on the side of the Exprsss for 8-10 seconds, then release and allow a full minute for the Express to restart to a slow, blinking amber light
Now, set up the Express again, like you did originally with the "old" modem or hub that you had previously.

I keep getting this message An unknown error (-15006) occurred while connecting to the AirPlay device " AirPort Express".

Please help. I have been having major difficulties with my Airport Express. It used to work fine but for the last year or so it continually disconnects, skips and ultimately drops out and itunes gives me this message "An unknown error (-15006) occurred while connecting to the AirPlay device “AirPort Express”. I keep resetting, unplugging, restarting Itunes, or my computer. It works for a couple of hours and then I get the message again. It's making me nuts and was a bummer at last week's party when we had no music, yet again. I have looked up the support discussions, but there is no answer as to how I can fix it. I am currently using Mt Lion OS. Does this have anything to do with it? Checked for software updates, but nada.
Any suggestions.

It may be possible the where you have the AX located may just be in a spot where it does not get a good signal even it is only 8 feet away.
I suggest that you download and install iStumbler. You will use it to determine the signal quality by making Signal-to-Noise Ratio (SNR) measurements. This will be easiest if your Mac is a laptop ... or you can borrow one. When taking the measurements, you only want your "main" AirPort running as this is what we want to measure at the location of the AX.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
You can easily find the Signal and Noise value using System Profiler on your Mac laptop.
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
Please post back your results.

Lost connection to one of my Airport express units. Serial number 44500WQV0. Message in Airport Utility is to use Version 5.6 to configure base station. I have version 6.3.1. Both airport express units bought at same time few years ago.

Hello all.
Lost my connection to one of two airport express units. Both purchased few years ago. Use them to stream music to house speakers via WiFi. I have v6.3.1 of Airport Utility. Message says to use v5.6 to reconfigure this base station.
How do I do that, please?
Mahesh

You can use the following workaround to install AirPort Utility 5.6 on a Lion or Mountain Lion Mac:
Be sure to read the caveats at the end.
Lion / Mountain Lion's package installer will refuse to install superseded versions of AirPort Utility. Instead you will need to use a package extractor such as Pacifist or unpkg. Pacifist is shareware, unpkg is free.
Download Pacifist here: http://www.charlessoft.com/
Download unpkg here: http://www.timdoug.com/unpkg/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
When the AirPort Utility .dmg file finishes downloading, open it to expand and reveal the AirPortUtility56.pkg package installer file.
Directions for Pacifist (I do not have screenshots for unpkg but the idea is similar):
Open Pacifist and from its File menu, navigate to the package and open it.
Click the "reveal triangles" until you see AirPort Utility 5.6.app:
Select it and then click Install from Pacifist's toolbar. It will then be installed in your Utilities folder, and you can quit Pacifist.
The most recent version of AirPort Utility included with Mountain Lion should be used to configure 802.11n - capable AirPort Base Stations. Make no attempt to delete it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist. Use the older version only as necessary for older AirPort Base Stations that cannot be administered any other way.
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder instead of resorting to the above procedure. It will run without complaint. It is only the package installer that is the problem.
Keep in mind that Apple's decision to abandon support for the original AirPort Express and AEBS was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

New Mac, Old Mac, Time Capsule, Old Airport express

Hi,
I have a couple of questions which I should be grateful if someone could answer:
I currently have an "old" mac (latest version of 10.4) and an "old" airport express (latest updates) connected to a modem which forms a basic wireless network with my mac connecting @ 802.11g speed. I also use airtunes.
I am looking at getting a new mac and a time capsule. My intention is to set up a new network with the time capsule as the main base connected to the modem. I only intend to use the backup facility with the new mac.
1.) Can I add the "old" airport express as a client to this network?
2.) If the answer is yes, then clearly the network will have to allow "g" and "n" devices to connect. will doing so mean that the new mac cannot take advantage of the greater speed available with the "n" standard? That is to say will the new mac only ever connect at the g speed?
Also is there the option to "zero" the time capsule hard drive?
Thanks

1.) Can I add the "old" airport express as a client to this network?
Certainly as long as the new Time Capsule is operating in an 802.11g compatible mode. The AirPort Express (AX) will connect wirelessly just like any other client.
2.) If the answer is yes, then clearly the network will have to allow "g" and "n" devices to connect. will doing so mean that the new mac cannot take advantage of the greater speed available with the "n" standard? That is to say will the new mac only ever connect at the g speed?
The 802.11n connection with the new Mac will take a speed hit whenever the old AX or old Mac are connected via 802.11g. The amount of the hit will depend on the amount of 802.11g activity.

Connecting MAC and PC to Airport Express

Similar Messages

Maybe you are looking for