Connecting Mac Mini to Vizio 42"

It seems I have no good options. If I select 1024x576, the picture is too "zoomed" in. If I select 720p, I can barely read the words on the screen. Very few other options even come up in the display options. How can I get better options? Anyone else try to connect to Vizio 42; if so, what resolution did you select

Similar problem...
gmc1974 –I just got a Vizio 32" for my computer monitor. I have it set up from the computer's preferences at 1024x768@75htz. On the tv menu, _do not use_ auto adjust (in Picture setup) because it will stretch it out out of wack. Under the menu item "setup" – Wide should be set at normal. So that makes everything the correct proportion at the highest rez supported.
Problem with that is this creates a working area that is about 6.5" narrower than the actual screen. Everything is very big, which has it's benefit. BUT what I am looking to do is to be able to use the entire screen area. I also want more "real-estate" to work on instead of just magnifying everything.
Does anyone know of any drivers or settings or add-ons that can make this work for me?

Similar Messages

Can I connect Mac mini to Windows laptop?

I would like to connect Mac Mini to HP windows 7 Laptop as to use
the laptop as keyboard and monitor instead of connecting to TV and using
separate keyboard.
Is this straight forward to do? does it need some workaround? or is it impossible?

Hi, you'd have to setup Screen Sharing on the Mini first it's like Remote Desktop on PCs.

Connect mac mini to internet via windows phone

hallo, how can i connect Mac mini to internet via my Windows Phone?

You are going to have to buy an external modem. They make ones that plug into the USB. Apple does not make one so you will have to buy a 3rd party modem. I would read the reviews before making the purchase to make sure you buy one that someone has tested with a mac.

Connecting mac mini to USB monitor didn't work!!

I connected new Mac mini(2007 model) with the latest HP USB monitor. Nothing got displayed on the monitor. Then I need to connect mac-mini to another VGA connector monitor. But still want to know to connect USB monitor with mac-mini as this is my target setup.

Thank you.
I used Tiger OS specific drivers from the following link.
www.displaylink.com/support/mac_downloads.php
Now it's working but not 100%. Upon starting of the mac-mini monitor works fine. But later when I switch off and switch on the monitor, then it doesn't work. Looks like monitor off -on trigger is not handled in the driver.
I will check with the driver like you have suggest and then acknowledge.

How to connect Mac Mini with LG 19LS4D LCD TV?

Hi all,
I just purchased my Mac Mini and tried connecting to my LG 19" HD TV using the supplied DVI to VGA adapter. When I first booted the machine "No signal" was displayed on my TV. I plugged in another 15" monitor and played around with resolutions and cable swapping and it works at 1024 x 768 at 60Hz (not ideal but better than nothing). Everytime I turn off the Mac Mini or it goes to sleep the resolution is reset and "No signal" appears again.
I have tried connecting via VNC to play around with the settings remotely but this has no effect on my TV monitor and is only resolved by the solution above or by leaving my Mac awake and not sleeping.
The documentation for the TV says that all the resolutions I have tried, and more are supported and Detect Displays under System Preferences shows these but defaults to a resolution that produces a "No signal" box.
Any ideas would be greatly welcomed.
Thanks in advance

Hi BSteely,
Thanks for the reply. To answer your questions, the LG shows on the mini as it should do i.e. there is a specific code (the LG model number) and lists the resolutions and refresh rates listed in the manual. Adobe Photoshop complains of a bad colour profile but I think that was only because when the LG is finally lit up it is as a result of me connecting the 15" monitor then hot swapping before OS X has change to realise.
When using VNC with the LG attached 1024 x 768 at 60Hz is shown but selecting that does not show the screen on the LG.
I did install SwitchResX from looking at other forums but was unable to save a usable state as the profile and resolutions were from a different monitor effectively despite my LG being connected. The P&D file that it gave back is listed in full below although I suspect this is for my 15"monitor (Excuse the length but I am unsure as to which bits are most useful).
The LG manual lists 1440 x 900 at 60Hz as the native default however the mini fails to recognise this. The easiest resolution I can get after hot swapping monitors is 1024 x 768 at 60Hz although the other day (not sure how) I did get 1280 x 1024 (at 60Hz?). The LG does not however have a DVI port. It does have HDMI so a DVI to HDMI cable could work but without buying a cable I don't know.
Here is the LG's information file:
DDC block report generated by SwitchResX version 3.8.4 for display
VGA/SVGA Display
------------------- RAW DATA ------------------------
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 | 00 FF FF FF FF FF FF 00 09 AD 38 02 BD E7 00 00
1 | 30 0B 01 01 08 1E 18 64 E8 17 26 A0 61 58 9A 2E
2 | 27 54 39 AD CE 00 01 01 01 01 01 01 01 01 01 01
3 | 01 01 01 01 01 01 C3 1E 00 20 41 00 20 30 10 60
4 | 13 00 1E 16 00 00 00 1E 64 19 00 40 41 00 26 30
5 | 18 88 36 00 1E 16 00 00 00 18 00 00 00 FD 00 3C
6 | 4B 1F 3C 08 00 0A 20 20 20 20 20 20 00 00 00 FE
7 | 00 46 58 57 4A 31 42 30 32 35 39 33 32 35 00 66
< 00FFFFFF FFFFFF00 09AD3802 BDE70000 300B0101 081E1864 E81726A0 61589A2E 275439AD CE000101 01010101 01010101 01010101 0101C31E 00204100 20301060 13001E16 0000001E 64190040 41002630 18883600 1E160000 00180000 00FD003C 4B1F3C08 000A2020 20202020 000000FE 00465857 4A314230 32353933 32350066 >
Valid EDID block: checksum passed
------------------- MAIN EDID BLOCK -----------------
EDID Version........1.1
Manufacturer........BMM
Product Code........14338 (3802) (0238)
Serial Number.......0000E7BD
Manufactured........Week 48 of year 2001
Max H Size..........30 cm
Max V Size..........24 cm
Gamma...............2.00
Display Supported Features:
Power Management: Active off Power Management: Suspend Power Management: Standby
Display type:
RGB color display
Display is non continuous frequency
Default color space is not sRGB standard
Input signal & sync:
Analog input with: 0.700V / 0.300V
Composite Sync
Color info:
Red x = 0.625 Green x = 0.345 Blue x = 0.180 White x = 0.329
Red y = 0.380 Green y = 0.604 Blue y = 0.154 White y = 0.225
Established Timings:
720 x 400 @ 70Hz
640 x 480 @ 60Hz
640 x 480 @ 72Hz
640 x 480 @ 75Hz
800 x 600 @ 60Hz
800 x 600 @ 72Hz
800 x 600 @ 75Hz
1024 x 768 @ 60Hz
1024 x 768 @ 70Hz
1024 x 768 @ 75Hz
Manufacturer Reserved Timings:
Standard Timing Identification:
Monitor Description blocks:
Descriptor #0 is Timing definition:
Mode = 1024 x 768 @ 75.029Hz
Pixel Clock............. 78.75 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1024 pixels 768 lines
Front Porch............. 16 pixels 1 lines
Sync Width.............. 96 pixels 3 lines
Back Porch.............. 176 pixels 28 lines
Blanking................ 288 pixels 32 lines
Total................... 1312 pixels 800 lines
Scan Rate............... 60.023 kHz 75.029 Hz
Image Size.............. 30 mm 22 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Positive vertical polarity
* Positive horizontal polarity
Descriptor #1 is Timing definition:
Mode = 1024 x 768 @ 60.004Hz
Pixel Clock............. 65.00 MHz Non-Interlaced
Horizontal Vertical
Active.................. 1024 pixels 768 lines
Front Porch............. 24 pixels 3 lines
Sync Width.............. 136 pixels 6 lines
Back Porch.............. 160 pixels 29 lines
Blanking................ 320 pixels 38 lines
Total................... 1344 pixels 806 lines
Scan Rate............... 48.363 kHz 60.004 Hz
Image Size.............. 30 mm 22 mm
Border.................. 0 pixels 0 lines
Sync: Digital separate with
* Negative vertical polarity
* Negative horizontal polarity
Descriptor #2 is Monitor limits:
Horizontal frequency range.......31-60 kHz
Vertical frequency range.........60-75 Hz
Maximum bandwidth unspecified
Descriptor #3 is ASCII data:
FXWJ1B0259325

No picture when connecting Mac Mini GMA 950 to Panasonic TX-PF42G10 via HDM

Hi !
I have a Mac Mini Core Duo 1,66 GHz with GMA950 chipset (MacMini1,1 sold from february 2006 to september 2006) which I was using as a Plex mediacenter connected to an old CRT display via an s-video adapter.
I purchased a brand new Panasonic TX-PF42G10 plasma screen the other day, and for the life of me I can't get my Mini to feed anything to the HDMI inputs via a DVI/HDMI cable.
When I remotely connect to my Mini with ARD or VNC, I can see it successfully detects I have a "Panasonic-TV" and lets me choose 1920x1080 either in 24Hz, 50Hz or 60Hz. I tried all three : no picture.
Tried connecting this Mini via the VGA input: works fine.
I tried to install SwitchResX but I don't really know what to do with it. Tried to install Snow Leopard too, but it didn't help either.
YET I FOUND SOMETHING RATHER INTERESTING.
I have another more recent Mini (one of the new 2009 models), hooked up to a Samsung T240HD display via DVI. Since this display also has an HDMI input, I tried to connect the other, older Mini to it. And then... the Samsung display wouldn't let me pick the HDMI input from the source menu!
I thought "***???", and then I tried to connect the newer Mini to this HDMI input: works great! I then kept the HDMI end connected to the display, unplugged the DVI end from the newer Mini and plugged it back to the older Mini : BINGO, picture at last...... except the display kept showing a "No signal, check cable" message (even though it was displaying my Mini desktop!).
So I thought "OK, some handshaking problem I guess". I unplugged the HDMI connector from the Samsung display and replugged it immediately: like I thought, once more the display wouldn't let me pick the HDMI input!
So I guess this is the same problem I'm having with the Panasonic plasma: this older Mini is unable to tell the TV that it is connected to it, even though it can perfectly read the TV specs. I've had no time to check what happens if I connect the newer Mini to the Panasonic plasma, but I'd bet it will work just fine.
So basically, my question is: will I ever be able to use this old Mini of mine with this shiny new plasma screen, or will I have to purchase another 2009 Mini? Is there anything I can do with SwitchResX? If so, what should I try?
Thanks for taking the time to read, and thanks in advance to anyone who can help.

Sounds quite possibly like the Panasonic enforces HDCP over its HDMI inputs and the older GMA950 equipped mini is unable to oblige.
That's what I thought too, as the newer Mini works just fine with my two screens, using the very same cable I used with the older Mini. Bugger...
FYI, I tried 720p : no picture either.
Does the Panasonic's user guide make reference to making computer connections over HDMI? It could be that only one of the HDMI inputs on the TV is designated for computer input, e.g. only one of the TV's HDMI inputs can work from a non-HDCP compliant source.
I do think I tried all 3 inputs, and the user manual never suggests that one of them is designated for computer input (I know some Samsung screens work that way, but this Panasonic doesn't seem to). Anyway, I'll give it a try once more, but I have little hope...
Meanwhile, I connected my Mini via VGA, 1366x768 resolution. Not too bad when viewed from the sofa, but it kills me not to be able to use the digital input...
Thanks for your replies, though

Use Mini DisplayPort to DVI adapter to connect Mac Mini to Cinema Display?

Hi
I have a new-to-me current model Mac Mini and want to use it with my 20" Cinema Display (model A1081).
The Mac Mini instructions say to use the HDMI port on the Mac Mini with a DVI>HDMI adapter cable. I seem to have only a DVI>Mini DisplayPort adapter cable. I'm guessing this will be OK to use, but don't want to fry the system straight out the box
Can anyone confirm it's OK to use DVI>Mini DisplayPort connection to drive the display?
TIA
Jim

Thanks for the reassurance BSteely!
One thing I've seen when rummaging through the forum is a suggestion that with MDP>DVI adapter is problems with display waking from sleep. Short of setting it not to sleep, is there a workaround to wake it up again if it doesn't respond to usual stimuli?
TIA
Jim

Connecting Mac Mini to Sharp LCD 45" TV

I just purchased a MINI for Xmas 09'. I have tried to connect it to my 45" tv via: DVI and S-Video connections, both have been un-successful! The only time the Mini shows a display is if I connect to a 17" computer monitor.....
I purchased the Mivi- Dvi to Video Adapter/ Mini DisplayPort to DVI adapter/
Mini-DVI to S-Video Adapter and not 1 works with TV. The only time it shows display is when I connect using the Mini-DVI to VGA adapter and connect to my 17" computer monitor.........
IS there something I'm connecting wrong? Does the MINI even connect to a 45" TV?
HELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPP! Its driving me NUTZ!
My TV is a SHARP LC-45GD7U. It has "S" Video inputs, DVI-I (29Pin) Inputs.
It also has HDMI but it is being used via CABLE TV!
Any info would HELP! THANKS!

Hi- sorry to hear you are having problems.
Did you try using the mini-dvi to dvi adaptor that was included for free in your mac mini box? Give that a try, but that being said, the mini display port to DVI adaptor should have worked.
Just a note- the S-video adaptor will NOT work with the new 2009 minis. At all. You should bring that back to the store and return it.
Also, can you give us the following details:
1. Model of your Panasonic set.
2. Exactly what do you see on your screen when you try to connect? Black screen? Blue screen? Garbled screen? Screen with huge or blurry text? Please be as specific as possible.

Mac Mini and Vizio 42" HDTV Model SV420M

I’m going to be canceling my cable tv, and just going with cable internet.
I’m going to be getting a Mac Mini to hook up to a tv and am considering the Vizio 42” Class 1080p HDTV, Model #SV 420M. I’ve looked at this tv at our local Walmart. The picture quality looks good, plus it has 4 built-in speakers. Anyone have a similar setup?
WalMart and Sears are the only options to purchase a tv locally, and the Vizio models look good for the price.

The mini ships with a mini-DVI to DVI (D) adapter. I use that plus a Belkin DVI (D) to HDMI cable. But I have to run a separate analog cable (you can use digital if your TV has a digital port) from the mini's audio port to an audio port on my TV. I have to configure the TV to know to associate the two ports, HDMI + audio to get the whole package. Some TV's are easier to use that way than others.
The little more expensive route, but what I intend to switch to using, is to get this device from Monoprice and combine the video and audio signals. Then you can run a single HDMI to HDMI cable from the converter to the TV for full digital audio and video in an HDMI signal. The device has Toslink and mini-DisplayPort cables for the digital audio and video, and a USB cable to power the device.

Connecting Mac Mini wirelessly to PC router

Hi all, I have recently purchased a MAC mini. Using the network setup assistant, I am able to see the wireless network I have setup in my home. It is password protected and the password has been accepted on my Mac. I am unable to connect so I open up the Airport admin utility and the 'Select Base Station' window does not list a base station. I don't know what to do at this point to try to correct the problem.

Which wireless base station do you have?
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058

Lacie Electron 22 blue III connection mac mini

Hi,
I'm trying to connect a Lacie Electron 22 Blue III CRT monitor to a new Mac Mini... I have the adaptor (HDMI to VGA), so monitor appear completely black... no signal.
I connected the Mac Mini to an HDMI TV, and I selected a 1024x768 resolution... so it doesn't work!
Who can help me, please?
Thanks,
ale

Yes,
A notable peculiarity of Thunderbolt is that it uses exactly the same connector as Mini Display Port, and that's not all. The Thunderbolt connector also carries Mini Display Port video signals. That means you can plug a Mini Display Port video cable/adapter in to a Thunderbolt connector and your monitor will work.
If you plan to do other things with your Thunderbolt connector and don't want it wasted on a monitor, you can also choose an HDMI --> DVI adapter, which for your purposes will be functionally equivalent.
You can even use both at the same time.
- Anonymous
http://x704.net/bbs/viewtopic.php?f=13&t=6134&p=75115&hilit=thunderbolt#p75115

Connect Mac Mini (Late 2012) to VGA?

Can I connect a Mac Mini (Late 2012) model to a VGA monitor? The Mini comes with an HDMI-to DVI adapter, so I can add a DVI-to VGA adapter to that, but I'm concerned whether or not an analog signal is passed through from the HDMI connection.

http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter

Connect Mac Mini 2011 to iMac 2010 via MiniDisplay Port?

Thought I read somewhere that a Mac mini could be connected to a 27" iMac for display purposes. I have the 27" iMac from 2010 and it has the minidisplay port. I'm considering getting the new Mac Mini. Can the two be connected so that the iMac display also functions as a display for the Mac mini?
Thanks

See Target Display Mode And Thunderbolt.

Connect Mac Mini 2011 to iMac 2011 via Thunderbolt

Is it possible to connect the new Mac mini 2011 to the new iMac 2011 via Thunderbolt to use the Display Target Mode of the iMac ?

See Target Display Mode And Thunderbolt.

Connecting Mac Mini to AV Receiver

I thought this would be simple. I purchased a Mac Mini today with the thought of connecting it through my AV receiver to my LG tv. Here's what I did:
1) brought it home from the store
2) plugged an HDMI cable into the Mac Mini, and the other end into my receiver (Yamaha RX-V3800)
3) there is another HDMI cable that goes from my receiver to my LG tv (LG Infinia 50PK950)
4) turned everything on, turned the receiver to the correct input that I plugged the Mac Mini HDMI cable into...
... and I get nothing.
The Mac Mini is on, the blue light is on.
Do I need to perform some sort of set up on the mini before I can connect it to my tv to use the tv as a monitor?
Did I connect the wrong HDMI cable?
Is it not compatible?
I thought it would be an easy connection if I went Mac Mini > HDMI > Yamaha AV Receiver > HDMI > LG Infinia 50PK950 TV.
Any help?

Yup - tried connecting it through 2 different HDMI inputs on the tv, and tried different HDMI cables in case that was the problem. All I'm getting is "No Signal" on the tv.
I can run a PS3 through my receiver via HDMI and to the tv and it works fine.
I think the first step at this point is to verify that the actual mini is working since I just pulled it out of the box and connected it. The blue light is on and it sounds like it is on but I haven't been able to see it on any monitor or tv.
Should I be able to just connect straight from the mini to a tv using an HDMI cable? I don't have a mouse or keyboard plugged in either, I only have the wireless apple ones.

Connecting Mac Mini to Vizio 42"

Similar Messages

Maybe you are looking for