Connecting Macbook Air 2011 to Epson projector for Keynote

Hi,
I'm trying to connect my Macbook Air 2011 to a brand new Epson (Powerlite 1760W) projector for Keynote presentations.
I bought the recommended Monoprice mini cable from the Apple store but I can only plug it into my MBA (small squarish socket), the other end dosen't connect to the projector. It seems the projector wants a VGA cable into it.
I'm lost. Do I still need the UBS cable between the two? Do I need a USB / VGA cable instead?
Thanks in advance.

Alison,
In looking at the technical specifications (on Epson's site) for this device it would appear that you can make HDMI work - http://www.epson.com/cgi-bin/Store/jsp/Product.do?sku=V11H361120&BV_UseBVCookie= yes
That being said, the HDMI end on the adapter and on the projector are most likely female. So you'll need an HDMI cable (the length will vary on how far the machine is away from the projector) but I suspect a 3 or 6 footer would work just fine. The cable is a male-to-male.

Similar Messages

  • How do I connect my MacBook Air 2011 to a projector?

    How do I connect my MacBook Air 2011 to a projector?

    It depends on the input connection for the projector, but since many are rduced resolution, VGA seems to be the prevalent common connection.
    It's just a matter of buying the adapter that adapts VGA to the Mini DisplayPort/Thunderbolt port on your Air. If it is a DVI or HDMI connection input on your projector, the online Apple Store carries that as well.
    This adapter and sufficient length VGA cable is all you need for VGA.
    Here's the DVI adapter.
    For some reason, I am unable to bring up the Moshi HDMI adapter on Apple's site.

  • How do you sync macbook air to overhead VGA projector?

    How do you sync a macbook air to overhead VGA projector for slide presentation?

    Welcome to Apple Discussions
    That depends on the set up of the projector.
    What input does the projector support? Older projectors often had VGA, S-video or RCA composit video inputs. Newer ones might have HDMI or a LAN cable, some of the newest are AirPlay compatible. 
    Once you have determined what connector you must (or can choose) to use you pick one and open System Preferences Displays... the MBA should be detecting and showing a second monitor... your projector should be detecting and showing a input signal.  You just have to match them up resolution and refresh rate wise.
    Say the projector has a resolution of 800x600. Compared with MBA's 1366x768 resolution, if you simply have it mirror the MBA, its screen is going to shrink to the point where it is more difficult to run apps (especially if you select them from the top toolbar, as everything is squashed together).
    Conversely, if you choose to use the projector as a 2nd screen, it preserves the MBA's original resolution, and only affects any app drug off-screen (which is what the students will see). You will still have the main desktop available for apps to keep open (but don't want the students to see).

  • MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    MDP to HDMI adapter causing issues while connecting Macbook air late 2013 edition to Projector. Projector shows grains on the display.

    Sounds like you may have been in extended display mode. If so, all you had to do was drag a window to the projector display. Or, if you wanted mirrored mode, in display preferences select check mirror display.

  • IS THERE ANY TRICK TO CONNECT THE MACBOOK AIR TO A VGA PROJECTOR? (I HAVE PROPER APPLE CABLE)

    Is there any trick to connect the macbook air to a vga projector?
    (I have the Apple right cable).
    I'm a professor in Brazil and just starting using the macbook air...

    Hi LCMONTANARI,
    If you are having issues connecting an external display or projector to your MacBook Air, you may find the following articles helpful:
    OS X Mavericks: Connect multiple displays to your Mac
    http://support.apple.com/kb/PH13814
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Regards,
    - Brenden

  • Question:How do I connect my MacBook Air so my Epson Stylus Color 740i Ink Jet Printer will print?

    Question:How do I connect my MacBook Air so my Epson Stylus Color 740i Ink Jet Printer will print?

    First, the Epson Stylus Color 740 (which I assume is your printer) is listed in this article, which is good news:
    http://support.apple.com/kb/HT3669
    So Apple can provide its driver software.
    This article tells you how to set up your printer:
    http://support.apple.com/kb/HT4670

  • Offline Installer for Macbook Air 2011 & Mac Mini 2011

    I understand that Macbook Air 2011 and Mac Mini 2011 uses a pre-installed OS X Lion with a different build number (11A2063).
    However, it seems that with 10.7.2 , there is only 1 build number: 11C74 , as per http://support.apple.com/kb/HT1633 , does it mean that 10.7.2 is a unified version of the OS X Lion for all mac products?
    Therefore, would it be possible to purchase & download the Lion Installer from Mac App Store , extract the InstallESD.dmg and use it as a offline Lion installer for Macbook Air 2011 / Mac mini 2011?
    P.S. I am seeking an offline solution because the recovery partition has been damaged, the internet recovery doesn't work (error 3403F & 4403F), and the recovery disk I have created with http://support.apple.com/kb/dl1433 showed an error "could not find installation information for this machine". And the Apple Authorized Service Providers are charging $150 for a simple restoration of the recovery partition.

    "does it mean that 10.7.2 is a unified version of the OS X Lion for all mac products?"
    Yes.
    "Therefore, would it be possible to purchase & download the Lion Installer from Mac App Store , extract the InstallESD.dmg and use it as a offline Lion installer for Macbook Air 2011 / Mac mini 2011?"
    I don't believe there is a 10.7.2 stand alone installer. 10.7.2 is an update file.

  • Is there a difference between the USB ports on an imac 2010 and macbook air 2011?

    Hello,
    I'm asking this question on behalve of a severe disabled friend.
    He has a special keyboard on USB.
    When I connect it to his or my iMac 2010, we need to reboot several times until the KB is recognised.
    When I connect that same KB to my macbook air 2011 it has no issues at all.
    The iMacs are 2.7GHz i5 running Lion.
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c2d
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfa
    The MBA is a 1.8GHz  i7 running Lion.
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c2d
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfa
    the keyboard info can be found at http://lucykeyboard.com
    Would appreciate some help as a few shops in Belgium are not that helpfull for this kind of troubleshooting.
    Thank you in name of Mario.
    Peter LOX

    Guy would this be of any help:
    To start up your computer in Apple Hardware Test:
    Press the power button to turn on your computer.
    Press and hold the D key before the gray startup screen appears. If Apple Hardware Test does not start up, see the Additional Information section at the end of this article.
    Note: Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT.  An Internet-enabled connection via Ethernet or Wi-Fi is required to use this feature.
    It takes a minute or so for Apple Hardware Test to start up and inspect your hardware configuration. While this is taking place, an icon appears on the screen:
    When the process is complete, select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language and then press the Return key.
    The Apple Hardware Test console appears. You can choose which sort of test or tests to perform:
    To perform all of the basic tests, click the Test button or press the "T" key or the Return key.
    To perform a more thorough diagnostic test, select the "Perform extended testing" checkbox under the Test button before you click the Test button.
    Your test results will appear in the window in the bottom-right of the console.
    To exit AHT, click Restart or Shut Down at the bottom of the window.

  • Firmware update on a Macbook Air 2011

    Hello guys, i have a Macbook Air 2011 that had the hard drive damaged, i installed a new one so him only starts on the Utility Page for Reinstall the OSX...
    This version of Mac Air are with troubles to Download/Reinstall the OSX using the Utility Page, him needs a Firmware Update to fix, but i just can't open that Update on the Utilities Page, i tried to put the Update Archive on a Pendrive using other Mac, and i just put the pen drive on the Mac Air and tried to execute the update file using the Terminal, but i got the error: cannot execute binary file.
    So how i can fix that Mac?
    I can't execute the Firmware update, and without fix the firmware update i can't install the Osx, i also tried to install a new version using the USB Drive Bootable Mountain Lion, but this kinda of Macs Air 2011 only accept a custom Lion OSX, that can be downloaded after the Firmware fix..
    Hope someone can help!
    Thanks

    You replaced the the SSD in a MBA that cannot be user serviced, so that's quite an accomplishment. Your model does not require a firmware update to use Internet Recovery - Computers that can be upgraded to use OS X Internet Recovery. Here's the process you follow:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    This should restore the version of OS X originally pre-installed on the computer.

  • Macbook air 2011 reinstall problem

    I'm really tired
    Actually I have a Macbook air 2011 /4g/ 11" , I format my hdd from disk utility and now I want to access to startup menu to reinstall it, I try that with holding option key and it just show me the internet recovery, my internet speed is very low, after about 8 hours it's show me the start up menu finally and ask me to reinstall the lion 1.7 so on that time because of some issues I just turn my macbook off because I think everything downloaded,
    now, again when i turn it on for continue the installing process it's show me again the internet recovery and want to download from internet again
    how can i access to the downloaded data and continue my work
    command+r and option key again straight me on internet recovery
    please help me

    OS X Recovery requries a broadband connection as noted >  OS X Recovery
    There's no need to hold down the Option key to restore OS X.
    Hold down the Command + R keys.
    If your download speeds are less than 10Mbps, you may not be able to restore your Mac using OS X Recovery.
    If you can, take your Mac to an Apple Store > Apple - Find Locations
    In most cases, they will restore OS X for free for you.

  • I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    I have a Macbook Air 2011. Can i run Bit-locker in Windows 7 Ultimate without any problems?

    montana girl wrote:
    I purchased a MacBook AIr Nov. 2011 11" and current OS X 10.7.5.  I read that I needed to update to Snow Leopard before I can update to Maverick, ...
    Whatever you read was incorrect. You can upgrade directly to Mavericks. It is in the App Store and is free.
    Snow Leopard predates the operating system you already have. That's the reason it will not install on your MacBook Air. You spent $20 needlessly for it, but it's yours to resell if you wish.

  • What is the best way to connect macbook air to present power point presentations

    What is the best way to connect macbook air to present power point presentations

    Since you posted in the Thunderbolt Display Community, I am guessing you are attempting to connect a MacBook Air to a Thunderbolt Display, but since you tagged projector, it makes me doubt my assumption. Can you provide some more details on what you are trying to connecto your MacBook Air to?

  • Connecting macbook air to my ipad

    I want to connect my Macbook air with my ipad but for some reason they connect recognise each other but won't allow anything to transfer between them. Any ideas?

    If you are trying to do this via Bluetooth, there is no support for file transfer over Bluetooth on iPads so the Mac will not find it.
    If you need to transfer things between them you need to use iTunes and the provided USB cable that came with the iPad.

  • MacBook Air 2011 Fan increased after installed mountain lion

    Hi all,
    I have a Macbook Air 2011, Intel core i7. After when I installed ML I noticed that battery go down very fast (about 2:40h) and the Fan speed RPM is about 6500 all time, but I haven't any strong operation pending or App. I have the same app open since lion (Internet, chat, jdownloader) in background (skydrive,evernote,weatherhd) the same app and background task I have with Lion.
    In monitor activity all task is from 1% to 20-30% of usage.
    Any Tips?

    I only have the fan kick in when the graphics is getting hit hard (playing games, driving external displays, etc) with crappy intel on board graphics. 
    Is your MacBook Air in a protective case, skin or having anything block the vent hinge?
    Definitely sounds like the OS thinks it needs to keep running the fan.
    You might try this smart temperature desktop widget and monitor your temperature to see if there is any sane reason for the fans to be on (they are loud!).
    http://www.bresink.com/osx/TemperatureMonitor.html
    My CPU Temp A Diode reports 117 plugged into AC with no fan running on a 13" MBA mid 2011

  • After installing Mountain lion, macbook air 2011 very slow

    After installation of Mountain lion my macbook air 2011 got very slow. There has been a firmware upgrade too. Can you help?

    Hi guys! Just installed ML on my early 2009 MBAir (after market upgraded to a 240g SSD, but still just 2g of ram), and I panicked a bit at first when it turned out to be painfully slow and not displaying right (+slow trackpad!).
    Bear in mind that the first thing ML will do is index your files for spotlight, which takes a while and is a bit of a resource hog that will slow everything else down and cause your machine to heat up.
    I let it work all night, but by morning, my CPU usage was STILL at 100% and everything slow...
    Activity monitor showed nothing over 10% CPU usage... First tip was to display ALL processes in Activity monitor, and not just MY processes, to see what exactly was sucking up my CPU!
    Then, and it seems to often be the culprit on MBA's, it turned out that the kernel_task process was using up to 170% of my CPU usage (!). Problem is, that process sort of does a million things, so it can be hard to pinpoint the actual issue.
    One of the things it does though, is work against overheating...
    Given the download+install+indexing, my machine had been working all day and night, and was indeed getting super hot. Turning it off and letting it cool down for a whole fixed it all.
    Kernel_task is back to normal, CPU usage is normal, display and trackpad are back to perfect. And in the end, ML is snappier than SL for me, even with the bare minimum in memory!
    Good luck! <3

Maybe you are looking for