Connecting MBA to domain using WPA Enterprise

Hi guys!
I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.
I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected.
So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):
Username: \\MyDomain\MyUserName
Password: MyPassword
But not for the MBA. For the domain/username, I've tried single \´s and /´s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.
Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.
Cheers,
Kim

Marc,
I'm suprised that WPA works over WDS. I had thought that because WPA cycles the encryption key with each message transmission that the two Airport devices would quickly get out of sync.
But I do respect Alan's opinion, so I'd give in to his statement that it does work, I'll be searching through the update readme's to see when it started working.
You could always drop back to WEP encryption. Unless you have the FBI next door listening in and analysing all your network traffic, it's not going to be broken.
WPA changes the encryption key with each wireless message, WEP doesn't. So in theory, with WEP, someone could analyse all your network traffic, looking for patterns. You can work out just how hard that is.
If you choose an obvious password (like from a dictionary) it won't matter if you're on WPA instead of WEP, the Feds / hackers will be in in a short time.

Similar Messages

Problems connectig using WPA Enterprise with Leopard

I updated my software yesterday, but today i could not log on to the network at my university. There were no problems with the Windows XP pcs I tested. It wonder if it might have something to do with the password reseting itself - when I enter the network preferences screen the password section is blank even if I ask Leopard to remember it.
It seems to accept my password and shows signal strength varying from between two points and full strength, but is listed as disconnected by network diagnostics.
If any of you have experienced similar problems any help would be appreciated.
-jonsef-

Welcome to Apple Discussions.
If you are using WPA Enterprise to connect, it's likely that you did so using 802.1X under Mac OS X 10.4 before installing Leopard. This mechanism has changed in Mac OS X 10.5 and it is clearly not performing as expected, and causing serious problems for enterprise and higher education users.
Insert the string <802.1X> in the Search Box in the upper right corner, and you'll see a number of posts about this issue by academic computing staff personnel, who are working cooperatively to identify the issues involved, and find workarounds until the matter can be addressed by Apple.
I suggest also that you contact an AppleCare representative at (800) APL CARE and initiate a case. Be prepared for very long wait on hold times, possibly 45 minutes or more. They are flooded with requests, but it's important that additional pressure be placed on them to escalate these reported cases for resolution.

How to connect to oracle10g Database using oracle11g Enterprise Manager.

Hi,
please suggest me how to connect to oracle10g Database using oracle11g Enterprise Manager.
i did setting in tnsnames.ora file of oracle11g database but when i am trying to connect sys@testvsr and password
using oracle11g Enterprise manager its not connecting but from command prompt its connecting.
its not acccepting hostname its simply telling invalid username and password ,if i remove and try to connect its connecting.
so please suggest its very urgent my manager is nagging.
Regards,
Srinu.

you cant attach a database 10g instance with
Enterprise manager of 11g as enterprise manager is
meant for a single database only .. your problem cant be solved
enterprise manager it can be solved by using GRID CONTROL
For more details visit oracle documentation..
Hope This helps..
BI TC

Windows does not connect to Airport Express with WPA-Enterprise

Hey,
we are using some AirPort-Express stations at our office to provide a wireless network to our staff.
The APs use WPA/WPA2-Enterprise (linked to a RADIUS-Server) to check the users authority.
On Macs and iOS devices the connection to AP works fine but if we try to connect a Windows client, Windows shows up the login-screen, checks the password (if you try a wrong password it shows the login-screen again) but then it says that no connection is possible. We also tried it on another laptop (both using Windows 7 Professional), but it still does not work.
Can anybody help us?
Thanks!

This issue is often caused by Windows firewall, and sometimes caused by wireless interfernece. Try disabling the firewall or other anti-virus software. You can also directly connect you AE to your computer via ethernet to access the configuration.
If all else fails, you have hard reset the AE device and reconfigure.

Leopard problem connecting with wifi AP using WPA PSK instead of WEP

I cannot connect via Airport to Speedtouch 580i accesspoint using WPA PSK.
WEP works just fine, but using WPA PSK I keep getting the message invalid password and then cannot connect wirelessly.
Tiger as of version 10.4.3 through .11 worked flawlessly via WPA PSK with the same AP.
I installed 10.5.4 Leopard from scratch and used combo 10.5.5 and and a few days ago combo update 10.5.6 but problem remain.
After the clean install I used migration assistent to get user data and logins from Tiger into Leopard, having used an image made with SuperDuper.
I have read many support forums and suggestions, it all didn't result in a working internet connection at all with WPA PSK :-...(
What I did until now:
- Disabled IPv6 for the airport interface
- Changed to a simple WPA PSK password without CAPITALS instead of something like #A!$($D$%\T@q{|
- Changed to a fixed channel in the wireless accesspoint instead of auto. http://discussions.apple.com/thread.jspa?threadID=1195706
- Rebooted Accesspoint various times.
- Changed to 802.11g only instead of b+g
- Tried both TKIP and AES as encryption type
- Disabled and re-enabled Firewall in Leopard
- Changed to fixed ip adress instead of via DHCP for network addres assignment
- Tried connecting with and without broadcast of SSID to AP.
- Repaired keychain , http://discussions.apple.com/thread.jspa?messageID=5858982
- Did various keychain changes incl deleting old values
- Deleted some items from library, as per suggestions from forums.
In the end I have a suspicion that it all drills down to something simple, quotes (" ") are used to present the password in the password field, at least this is the case with WEP, but this does not harm the functionality for WEP as this is working alright.
With the current WPA PSK implementation it perhaps does influence, because it keeps saying invalid password. I have tested both with and without quotes and things did not improve at all.
I'm running out of ideas to solve this matter, therefore I have sent a report to Apple via their Feedback webpage.
While having using 10.5.5 fo a while I had big hopes 10.5.6 would cure the problem , unfortunately this is not the case.
Please provide more suggestions to solve this problem.

Checked Accesspoint firmware upgrade. The only difference between the current 4.2.7.25 and the latest version, 4.2.7.30 is the support of WDS i.e. expanding the wireless network by connecting 2 APs together (via WEP).
Still tried upgrading via the MAC OS X update software, it did not fire up, I think the software is not fond of Leopards
As WEP works ok with Leopard on my G4 Powerbook 12inch, I didn't want to focus further on the speedtouch because of the motto 'if it ain't broke don't fix it.'
Am going to research more on Keychain and DHCP, others are reporting issues with it along with this 'airport crisis' http://forums.macrumors.com/showthread.php?t=375838

Cannot connect to mobile hotspot using wpa; only open security works

I have a Galaxy S5 and am trying to connect to the mobile hotspot using my Surface tablet. If I have the mobile hotspot setup using WPA2 security with a password I cannot connect however I can connect if I am using Open security.
I can connect the surface to other routers using WPA security, just not the Samsung as a mobile hotspot.
does anyone have any suggestions?

What you have proved here is that your tablet has a password conflict somewhere. You should find out where your wireless profiles are being stored on that device, wipe them out and then try connecting again. Once you provide the tablet with all of the correct connection credentials and configurations it should connect just fine.
Connecting without a password proves there is not a WiFi issue. Connecting to other devices is additional proof that there is not a WiFi issue going on. You just need to straighten out the security issue and then will be good to go.

New iPad won't connect to Mobile Hotspot using WPA or WPA2

I have a new iPad running iOS 6.01. It connects to wifi networks perfectly. I also own a Blackberry 9790 that is capable of running a wifi hotspot. When I try to connect my iPad to the mobile hotspot when WPA or WPA2 Encryption is used the iPad cannot connect. If I change the Encrypstion to WEP I am able to connect the iPad and wifi works on it.
Is there a reason the new iPad won't connect to a mobile hotspot that's using WPA/WPA2? Is there a way to resolve this issue?
I am able to connect my MacBook Pro to the mobile hotspot using WPA/WPA2 so I know that it's not my phone or the hotspot not working properly.
Thanks

It appears as though I fixed my own problem...I hadn't yet tried restarting my blackberry or my iPad since I had been trying to setup the mobile hotspot and connect the iPad. Anyways, I restarted both devices and then tried connecting using WPA/WPA2 and it worked.
iPad is now connecting to my mobile hotspot using WPA/WPA2 with no problems.
Maybe try doing the same if you haven't.

My laptop is using Windows 8.1 and it can't connect to a WiFi using WPA2/Enterprise authenticate

I am using a laptop Dell Inspiron 15z with Windows 8.1 64 Bit OS. And i build a test lab to test WPA2/Enterprise authenticate.
My Lab is like that:
1/ My DC + DNS using Windows 2012 RC2 Standard.
2/ I install CA + Radius Server on DC Server.
3/ My AP WiFi is DrayTek AP810
After configed i can you use my iphone 5s (ios 8.1), my android phone (Samsung Galaxy), 1 laptop Windows 7, 1 laptop Windows 8 to test. And all of them can connected with no problem.
But my laptop using Windows 8.1 64 bit OS can't connected. After i choise the WiFi, it only show "checking network requirement"- not show the option question username and password. (and i config it exactly like laptop Windows 8).
I have tried find the answer on Google but nothing help me. (i have choise PEAP, install Certificate...)
Please help me guys. Thank you so much.

Hi,
About this issue, we could troubleshoot as the following methods on the Windows 8.1 client side.
1. Maker sure the "Automatically use my Windows logon name and password" setting on the client is disabled and on your client and type in the correct domain name when prompted.
2. If the issuer persists, delete this network profile in your Windows 8.1 client with commands and manually configure it as
this similar thread.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Basic Airport card can't connect to Wi-Fi using WPA encryption

I have a Powerbook Pismo 500mhz using OS 9.2.2 and Airport 2.0.4 software with a basic Airport card installed in it. For over a month I was able to connect to my resorts wi-fi network by putting in there Key 1 password and I was connected just fine. The other day they changed the password and upgraded there software from WEP to WPA, Now no matter what I do I can't get it to accept my password. The password is 24 letters long and every time I enter it I get "An error occurred while trying to join the selected airport network" .
I have tried everything from putting the password in quotes, to starting it with $, to even using Wep Key maker. In fact they call it a PassPhrase, not a Password. There is no options to change the encryption with Airport 2.0.4. I have looked all over the net and this is my last resort. Please help. If you wish you can email me directly at [email protected]
Powerbook Pismo 500 Mac OS 9.2.x Basic Airport card, 768 ram, 30 GB HD

I've been having horribly similar problems trying to get my Mac to join up with a non-Apple Wi-Fi network running WPA.
I suspect you are probably entering the WPA password into the old WEP password field on your Powerbook. If you are, that will never work. You need to have the system asking you for a WPA password not a WEP one, and if you're software isn't current you won't be given the option.
Try this - you need to get your OS level and airport drivers much more current. I was experiencing the same error message as you when I was on OSX 10.3, which I have a feeling is the first level of OSX that properly supports WPA. Move up to 10.4 if you can. Also get the latest Airport drivers installed. Henry B may be able to give you the link, or you will find it embedded in another post.
If you are as unlucky as me you may find that even this doesn't fix your problem. I'm now getting the message that my password is not accepted - a step forward but not a cure.
If you do manage to get it going (and all advice is that the OSX upgrade and new drivers usually do the trick), let me know what your fix was!
By the way, things also seem to work better if you have your SSID broadcast by the Access Point.
Richard

WRT310N Connection is horrible when using WPA

I bought this router Nov 3rd of 2008 and it worked fine for a few days then I setup WPA and the connection starting dropping. I can't hold a connection on any of my wireless devices, however if I just let the router sit with the factory settings I have no issues with connectivity.
Any ideas?
P.S.
I upgraded fireware first day I got the router.
-Cameron
Solved!
Go to Solution.

Change the MTU settings on the router.
Login to http://192.168.1.1, leave the username and password - admin
Change MTU - manual and size to 1350 and save the settings.

Power Mac G4 won't connect to WPA Enterprise

At the university that I work at we are updating our wireless network to use WPA Enterprise only, instead of WEP 802.1x and WPA Enterprise. The computer that I am having problems with is our test machine for writing connection documentation for the students, faculty, and staff. I can get the computer to access the network trough WEP 802.1x but not WPA Enterprise. The computer will start the connection process and then fail and not connect to the network.

First, make sure you have at least these versions of the Airport software:
107795- AirPort Card: When You Can Join a WPA Network
Then read this article about set-up, including WPA Enterprise:
107921- AirPort for Mac OS X 10.3 or later: Using different types of wireless security (WEP and WPA)
"For a school or business, WPA Enterprise can provide each user with unique credentials. WPA Enterprise uses the same security as WPA Personal, but with the added measure of individual usernames and passwords (WPA Personal uses a shared password). Each wireless base station communicates with a RADIUS server to authenticate the user's credentials."
"You may need the help of a network administrator to join an 802.1x network."

How to Reset Password of User while not connected to Domain using Local Admin Account

How to Reset Password of User while not connected to the Domain using Local Admin Account
(I have the use of a local admin account), and I want to help a user reset their password who has logged in the PC and had their credentials cached, but forgot this password.
In Local Admin Account :
When I go to Control Panel, users, users, manager user ; I cannot see any users in this window except the local admin account, and, so I cannot reset a user password this way.
When I go to lusrmgr.msc, then users ; the local admin account will display only.
If I go to command prompt and type "net user", this will not display any users who have logged in to the computer, and so I cannot use "net user" to reset a password.
I don't want to use any disks, 3rd party programs, or create a VPN connection to the domain. I just want to help a user who calls in and forgets their password.

Hello Keith,
I know this is an old thread but I'm trying to better understand how I could change the domain password while not on the network. What I'm getting from your post is that you:
1. Create a local user account (not a domain user)
2. Login with that local user account
3. Connect to the VPN while logged in as a local user
4. Log out of the local account and login with the domain credentials
Now, my question is based on the assumption that the password created on the local account is the same password that one will use to login to the domain account? Also, is the local user account the same as the domain account?
Thanking you in advance!

WPA enterprise (need to not validate Certificate)

We currently use WPA Enterprise and we require the network to be configed manually to get it to work on a windows 7 pc.
We have to create the Wireless as so:
Network name: XYZ
Security: WPA-Enterprise
Encrypton type: TKIP
Under Properties for network... we need to change PEAP and uncheck Validate server certificate
Either we enable single signon if it's a domain joined PC and tell it to send user info from logged in user...
Or we store user info for non domain joined PC's.
Ok so that's how we get a PC running windows 7 to join the network...
I can't get an Iphone running 3.1.3 or an Ipad wifi model to connect.
Note: the iphone used to work on our network (nothing changed in 1 year)
WE use Cisco Wireless LAN controllers 4400 series and ABG light weight Access points.
How can I manually configure the wifi on an apple product? iphone/ipad

Try using the iPhone Configuration Utility.
http://support.apple.com/kb/DL851 - (for Mac)
http://support.apple.com/kb/DL926 - (for Windows)
It will let you manually select the security type and protocol. It also lets you install certificates and set trust exceptions on the devices.
You can find detailed information about the iPhone Configuration Utility in the Enterprise Deployment Guide, which is available here: http://manuals.info.apple.com/enUS/Enterprise_DeploymentGuide.pdf

LaserJet CP1525nw & WPA-enterprise

We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
We need printing from the iPads, ePrint does not offer. Any help would be much appreciated. Firmware 20110329.

Hello,
If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Extend WPA Enterprise

Does anyone know if there is any way I can connect my Time Capsule to my University wireless network?
I live right opposite my university and if I put my laptop on my window sill I can connect to the wireless, but can't connect from my desk... I was wanting to put my time capsule on my window sill, use that to connect to the Uni wireless and thus extend the connection into my room...
Does anyone know a way to achieve this? My Uni uses WPA Enterprise encryption...
Many thanks.
Andrew.

One possible option, with your existing equipment, would be to reconfigure your Mac as a "software" router by employing OS X's Internet Sharing feature. In this case you would be sharing the Mac's wireless Internet connection through its Ethernet port. Theoretically, you could then connect the TC to the Mac's Ethernet port; reconfigure the TC as a bridge, and then connect clients to the TC.
Personally I haven't tried this to verify that it would work. Mainly because using a Mac as a software router is extremely limited as far as features that this would provide.

Connecting MBA to domain using WPA Enterprise

Similar Messages

Maybe you are looking for