Connecting Mitel Ip phone to BT Hub 3?

Use Mitel phone as a teleworker. Switched to BT infinity and hub 3 this morning. Everything else is working except IP phone. BT engineer has connected IP phone via ethernet to port. Have tried connecting phone directly to router and not via hub and get the same problem. Do I need to get my mitel support to help me reconfigure the phone or do I need to get BT to unblock a port? Or something else entirely?
Phone is displaying DHCP:discovery boot ver 02.01.00.04. Mitel phone was working perfectly until router changed to BT Hub with BT Infinity router. What can I do to resolve it?

Its best to give the IP phone a static IP address, outside of the DHCP range.
There is information relating to a Panasonic phone on this link, which should give you some idea.
Using the Panasonic KX-TGP500 on BT Broadband ADSL or Infinity.
If you get the Mitel one working, then it would be helpful to others if you could explain how.
I am assuming that you are on Residential Infinity and not Business Infinity?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • HT1178 I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN o

    I have BT Infinity at home with the BT modem connected to the phone line and then to a BThub which delivers the wif signal. I have purchased an airport extreme to improve wi fi strength if how do I connect up to hub it states connect modem to WAN on back of Airport Extreme.
    Instructions do not mention connection to BT Hub and the BT modem has only one output which you dicsonnect from Hub and connect to airport extreme leaving. Once you do this Hub has no signal.
    How do I rectify
    Paul

    you can also set up the Airport extreme to extend the wireless by hitting the wireless tab in the airport menu then click the drop down menu to select extend
    Apple's "extend" function is a proprietary setting that was designed to only work with other Apple routers.
    It would be extremely unlikely that this setting would work with a BT product, or any other manufacturer's product for that matter.
    But, I haven't tested this with a BT product...and I suppose anything is possible.
    Still, I would be extremely surprised if this worked.
    The AirPort Extreme might "join" the BT network if you try this......but the AirPort does not provide any additional wireless signal coverage when it "joins" a wireless network. In fact, it really does nothing when it "joins" a network except enable the USB port.

  • I phone connecting to BT Fon instead of hub

    Can anyone help when i power up my iphone each morning it goes to BT Fon instead of my home hub. I then have to go into settings on phone and tick hub. How do i make that my default?
    Solved!
    Go to Solution.

    When it's connected to FON, click the blue arrow on the right hand side and press the "forget this network" button at the top.
    Problem solved
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Connection problem Squeezebox radio to home hub 2

    I am not able to connect my squeezebox radio via home hub router wirelessly.Password is not accepted other devices are still ok mobiles etc have tried everything i can think of changing channels reseting radio + router i can still connect via ethernet cable. Thanks in advance
    Solved!
    Go to Solution.

    franmac wrote:
    Tried using my old netgear dg384g router which i set up ok for other devices but still not able to connect 
    squeezebox radio wirelessly-really annoying!
    Did you set it up correctly?
    If you use a different router with ADSL, then you need to make sure that the authentication is set to PPPoA.
    You can use a user name of [email protected] and a password of bt
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Nokia Phone Browser "could not connect to the phon...

    Hi friends, I have a Nokia N72 mobile and am using PC suite 6.81.13.0. My problem is that I can't see the folders within my phone memory or memory card using nokia phone browser. As soon as it shows connected, I click on file manager and the error appears. Although it shows Nokia N72 connected I get a message that says "Could not connect to the phone" even though it is definitely connected. Windows explorer eventually opens and although Nokia N72 is visible no folders/files below this are. Only the synchronization option is working fine. This problem is same both with data cable and bluetooth dongle. I have also installed the latest version of nokia pc suite but of no use. Plzz help me out as it is very urgent...Hoping for early response... Thanx in advance...

    Also experiencing the Cannot connect to OVI Account Server issue.
    I turned off my firewall; confirmed correct account information and Internet connectivity via account sign in on ovi.com website. Can not update MfE or Music player on my 5800 XpressMusic (RM-428) via Ovi Suite as a result of this account server connectivity issue.
    I was able to perform the updates via NSU 3.0.223.
    I echoed this posting to the "Give Us Feddback" section of Ovi Suite.
    System Information
    Nokia Ovi Suite 3.0.0.284  
    Nokia PC Suite 7.1.51.0 
    Ovi Player 2.1.11020.2
    PC Connectivity Solution 10.50.2.0 
    Connectivity Cable Driver 7.1.36.0
    Nokia Ovi Suite Software Updater 2010.44.0.60888
    Maps Service API 4.0.24.1
    Nokia mPlatform 2.7.44
    Ovi Desktop Sync Engine 1.4.1.42
    Operating system:
    Microsoft Windows XP 32-bit Edition, Service Pack 3
    Language: English
    Detected internet browsers:
    - Microsoft Internet Explorer 8.0.6001.18702 (Default browser)
    - Mozilla Firefox 3.6.13
    Detected Bluetooth stacks:
    - Microsoft (Version: 5.1.2600, Build: 5512), In use.
    Detected USB drivers:
    - Default Hub Driver for USB 5.1.2600.5512
    - USB Modem Driver 5.1.2600.5512
    - EHCI eUSB Miniport Driver 5.1.2600.5512
    3390 - 6103b - 6133 - 6290 - 6301b - N78-3 - 5610d-2b XpressMusic - 5800d-1b XpressMusic, N900 RX-51, N8-00, C7 Astound, 808 Pureview, Lumia 1020.
    Nicer phones and still no one calls me!

  • I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.

    I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
    The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
    I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
    This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
    For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
    Is anyone else having this issue?
    I will soon loose my patience....
    I have reset my phone three time and have reset network and other setting mutltiple times.

  • How to connect my i phone to wireless printer

    how to connect my i phone to wireless printer

    You would have to have one of the few HP printers that support airprint:
    iOS: AirPrint 101
    Or you could find an app that provides this feature.

  • How to connect my I phone 5 to my apple TV

    Im trying to connect my I phone 5 to my apple TV!!! Thanks guys!!! So wish apple had a TV comming out that would be awsome!!!!!

    Welcome to the Apple Community.
    Exactly how are you trying to connect it and what problems are you having doing so.

  • My iPhone 5s won't turn off or on it keeps flashing the apple screen on off.  When I tried to connect to iTunes on windows 8 computer, it comes up with an error message: iTunes could not connect to this phone.  An unknown error occurred OxE8000084

    Can anyone help me?  My iPhone 5s is flashing the apple screen on and off and I can turn the phone on properly or off.  When I connected it to iTunes on my windows 8 computer I got the following message: iTunes could not connect to this phone.  An unknown error occurred OxE8000084.  Can anyone help me correct this so I can start using my phone again.
    Thank you

    http://support.apple.com/kb/TS3221

  • Cannot connect to the phone system. An unidentified error has occurred, Please try again.

    Issue:  Lync 2013 users with remote call control enabled cannot connect to the phone system.  When the user logs into Lync, they see an exclamation in the bottom right corner
    with this error.
    Error:  Cannot connect to the phone system.  An unidentified error has occurred, Please try again.  If the problem continues, please contact your support team.
    Environment: 
    1 site:  Site1
    2 Pools:
    1. Lync 2010
    Trusted application is added here for the site.
    2. Lync 2013
    Avaya phone system:  AES r6-1-2-32-0
    I have not moved the trusted application to the Lync 2013 pool yet, but my understanding is that it should still work since it’s in the site.  Is my understanding on this correct?  (All of my other trusted applications do work for Lync 2013
    users & none of them have been moved yet. Remote Call Control is the only one that does not work.)
    This is from the uccapi log.  This is just from the user logging in, not actually making a call.  Below are the items that I think are important, however, I don’t know how to interpret it to determine if the problem is on the Lync side or
    the Avaya side.  Here’s a summary:
    SIP/2.0 100 Trying
    Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="E05700E2", snum="9", rspauth="f308eae87c0bbe64a1ab213574776cbdf9823ab6", targetname="lync03.domain.com",
    realm="SIP Communications Service", version=4
    From: <sip:[email protected]>;tag=bbb282ebbd;epid=a86d5b0a29
    To: <sip:[email protected]>
    Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
    CSeq: 1 INVITE
    Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
    Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
    Content-Length: 0
    SIP/2.0 200 OK
    Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="15C0F9A2", snum="13", rspauth="4fd891e39a33e902fb1cec5d980e5bf0ccb172a0", targetname="lync03.domain.com",
    realm="SIP Communications Service", version=4
    From: <sip:[email protected]
    >;tag=bbb282ebbd;epid=a86d5b0a29
    To: <sip:[email protected]
    >;tag=A7A45C856ECD79121A1827265ABBD7F6
    Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
    CSeq: 1 CANCEL
    Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
    Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
    Content-Length: 0
    SIP/2.0 487 Request terminated
    Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="F46EC133", snum="14", rspauth="1d92718caa4f61d967faa46a5c256aafa8b4e740", targetname="lync03.domain.com",
    realm="SIP Communications Service", version=4
    From: <sip:[email protected]
    >;tag=bbb282ebbd;epid=a86d5b0a29
    To: <sip:[email protected]
    >;tag=A7A45C856ECD79121A1827265ABBD7F6
    Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
    CSeq: 1 INVITE
    Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
    ms-diagnostics: 5002;reason="Request was cancelled";AppUri="http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent";source="lync03.
    domain.com"
    Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
    Content-Length: 0

    Hi Suelizy,
    To better understand the issue, I would like to collect the following information for troubleshooting:
    1. Do you mean the Lync 2010 user can connect to the Phone System?
    2. What’s next hop pool of the application?  
    In a mixed environment, you must set the next hop pool to be the Lync Server 2013 pool.
    Best regards,
    Eric

  • How do I unlock my iPhone with my IMEI code on iTunes. And how do I change the iCloud account connecting to the phone?

    My sister got the 5S, so she has given me her old 4S. She got the IMEI code from her network to allow me to unlock it. When I plug the phone into my computer, how do I use the IMEI code to unlock it on iTunes. The text my sis got from O2 says, "Apple have confirmed the iPhone IMEI 01.....etc. is set to unlock. To complete, connect the device to iTunes with a SIM never used in the iPhone". But I'm not sure what to do, I already connecting the iPhone with my SIM to iTunes... What next? Also how do I change the iCloud account connected to the phone (hers) to my own?
    Thanks.

    Please see your duplicate post below.
    https://discussions.apple.com/message/24231623#24231623

  • I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup".

    I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup" to have all the other information I had from my other iPhone load up to my new iPhone. Hope you can help. What is the difference between "Backup" and "Restore Backup"; is all that different from synching.Thanks. Ana

    That's up to you. Do you want the data on your old phone on your new phone? If so, you follow the directions here:
    http://support.apple.com/kb/HT2109
    If you want to setup your new phone as a new device, then there is nothing you need to do.

  • I have locked myself out of my iphone 4s, when i connect to itunes it says it is unable to connect to my phone as it is locked with a passcode?

    Hi I have locked myself outi  of Iphone, changed the passcode and i have subsequently forgotten it! .... i have connected my phone to itunes and that just brings a message up saying that it is unable to connect to my phone as it is locked with a passcode ... how can i unlock it?

    Follow the directions here:
    http://support.apple.com/kb/HT1212

  • My mac is a version 10.5.8. I just downloaded ios7, and it is telling me I need to download iTunes 11 to connect to my phone, but I don't have a new enough version. What do I do?!

    My mac is a version 10.5.8. I just downloaded ios7, and it is telling me I need to download iTunes 11 to connect to my phone, but I don't have a new enough version. What do I do?! I think snow leopard was the last update I purchased.  Is there a way to convert my phone back? I need to be able to update it, but don't have the money for a new computer.. Help!

    10.5.8 is Leopard, not Snow Leopard. Leopard ran on both PPC and Intel Macs, but Snow Leopard runs only on Intel Macs. iTunes 11 will run on Snow Leopard, though I'm not sure whether iOS7 requires a higher system (Apple seem to specify only itunes 11 and not an OSX system so you may be OK). However if your Mac is a PPC you cannot proceed; if it's an Intel one you can purchase Snow Leopard in the Online Store (search for Snow Leopard to find it quickly) - it's not expensive. It's not possible to roll your phone back to iOS6.

  • My phone keeps resetting and then shows the icon to plug into itunes but when i do itunes tells me that it can't connect to my phone because it has a passcode and wants me to unlock it to connect. My phone only gives me the option to make emergency calls.

    My phone started resetting today over and over and then shows the icon to plug into itunes. When I tried plugging in, a message pops up saying that itunes can't connect because my phone has a passcode and i need to unlock it to connect. my phone won't let me do anything more than make an emergency call. it wont give me the option to enter my passcode to unlock the phone. What can I do?

    After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.

Maybe you are looking for