Connecting mobile phone to 4.1 system

how can i connect my motorola v3i to my creative 4.1 inspire speaker system?

Marc Caubet wrote:
We would like to connect a cellullar phone to a virtual machine. Connecting this phone to the hypervisor is detected as /dev/ttyACM0/dev/ttyACM0 is a serial device, not a block device. You cannot attach it with block-attach. However, you've attached it via USB as well, so you may be able to use USB techniques to get it into the guest:
http://wiki.xen.org/xenwiki/XenUSBPassthrough.html

Similar Messages

BT and Java - Btl2Cap Connection (Mobile phone and Digital Pen)

Hi!
First a short Introduction:
For a project I have to stream data from Maxell Penit DP201(4.1) to a mobile device (over a midlet). Data Connection is built up over Bluetooth.
My Questions are: Is btl2cap the right method for connecting digital pen and mobile phone?
If yes, is the btl2cap string correct?
The pens device adress is 00-07-CF-56-05-5D
Does anyone know a sample application like this I want to program?
Structure;
package /
Midlet
Class extending thread
Here's the code:
public void run() {
    //Bluetooth
    //String connString = "btspp://0007808303AA:1;master=false";
    String connString = "btl2cap://localhost:0007cf56055d;ReceiveMTU=512;TransmitMTU=512";
    System.out.println(connString);
    try {
            LocalDevice local = LocalDevice.getLocalDevice( ) ;
// build ServiceRecord
            local.setDiscoverable(DiscoveryAgent.GIAC);
L2CAPConnectionNotifier service = (L2CAPConnectionNotifier)
Connector.open(connString);
ServiceRecord sr = local.getRecord(service);
// accept Connection
L2CAPConnection connection = (L2CAPConnection ) service.acceptAndOpen( );
        } catch (Exception e) {
            e.printStackTrace();
        }Thanks to all who can help me to reach the next step in my project.
Best regards

Hi,
The reason for the compilation error is that the IDE is not able to find the jar file where bluetooth api is packed. try to put the jar file in lib directory of the project. Some IDE generates class files even though there are some compilation errors in java file.
So it is better to resolve compilation errors before putting it in the device.
The reason why the app freezes in the device is that you have not used a seperate thread to do the inquiry, try to use a thread where the inquiry will be done so that the apps main thread will respond to the user input.
Hope this help you.

Connecting mobile phone to Oracle VM 2.2

We would like to connect a cellullar phone to a virtual machine. Connecting this phone to the hypervisor is detected as /dev/ttyACM0
[root@vmserver10 scripts]# xm block-attach picmon04 phy:/dev/ttyACM0 xvdb:disk w
Error: Device 51728 (vbd) could not be connected. /dev/ttyACM0 is not a block device.
Usage: xm block-attach <Domain> <BackDev> <FrontDev> <Mode> [BackDomain]
[root@vmserver10 picmon04]# lsusb
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0421:0802 Nokia Mobile Phones CA-42 Phone Parent
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 002: ID 413c:a001 Dell Computer Corp. Hub
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
picmon04 has only configured a xvda, maybe needs to be connected somewhere else? Any idea?
Thanks a lot,
Marc Caubet

Marc Caubet wrote:
We would like to connect a cellullar phone to a virtual machine. Connecting this phone to the hypervisor is detected as /dev/ttyACM0/dev/ttyACM0 is a serial device, not a block device. You cannot attach it with block-attach. However, you've attached it via USB as well, so you may be able to use USB techniques to get it into the guest:
http://wiki.xen.org/xenwiki/XenUSBPassthrough.html

Most of the menu bar disappears on connecting mobile phone

So, I have a strange glitch happen when I connect my Mobile Phone under Snow Leopard.
Once I connect it, a new icon appears, showing five progressively bigger bars (just like a network measure), I suppose it's something to do with the mobile phone's network connectivity/modem.
Anyways, a few seconds later, the following message appears:
'A new network interface has been detected.'
After this, most of my icons on the menu bar disappear, including the wi-fi, bluetooth, battery, date, clock, etc. Spotlight intermittently appears and disappears, but I can't use it at all (neither by clicking or using the shortcut).
I have created a new user account, and the exact same problem happens, so I suppose it's not my user account problem.
I'm using a Sony Ericsson device, btw.
Just wondering if someone else had this problem?
The device has bluetooth ruined, so I need to connect it to sync, etc (as well as recharge).
Since I believe this is somehow related to SL trying to create a new Network connection through the mobile phone, and I don't really care about that, is there any way I can disable SL to NOT try to establish a modem connection with it automatically?
Disabling it really doesn't work, because SL simply creates a new one automatically, which is kinda silly, and I really don't get why it does that...
cheers.

I'm having this exact problem as well. (Spotlight's behaviour is actually SystemUIServer crashing and restarting in an endless loop.)
I'm going to submit this to the Bug Reporter but temporary workarounds are very welcome since it's frustrating to have to log out and in again every time I plug my cell phone in!

Satellite L555-10T - Can't connect mobile phone or other BT device

Im having the same problem. I have bought a L555-10T but I cant connect to any phone or any other bt device. Not even a headset or simpel hp pda.
Is reinstalling the bluetooth files the only sollution? Cause BT was build in this win 7 64 machine. Its kinda weird to have to repair something that was deliverd with the laptop.

Which color has your Bluetooth system tray icon (it should be blue/white) ?
If it is blue/red, then check if you have really Bluetooth inside.

Connecting Mobile Phone to HomeHub2

For a year or so now I have had no problems connecting my HTC Legend phone to the internet. Now I cannot connect at all. The phone picks up the strong wireless signal, but the connection process stops at 'Obtaining address'. It's the same problem on the previous Hub. It isn't a phone problem - it connects to the internet via all other available wifis I've tried, including the Vodafone shop. It would seem to be a Hub fault. Help please!

Assuming that you are trying to connect to your own home hub, as sometimes people have mistaken an adjacent home hub for their own.
I guess you have entered the correct wireless key, checking that the it is identical in case and letter/number combination.
The next thing to try is to change the wireless mode to B/G only, and select WPA only, and not WPA/WPA2.
See if any of these help.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Forms: connect mobile phone to send SMS

Hi Gurus ,
I am using
        Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
   and oracle forms 10g 10.1.2
I wanna connect my mobile lets say (nokia , glaxy , qmobile) to forms and on any trigger like button pressed, send messages to selected cell numbers from the database..
is it possible ?
thanks
regards:
usman noshahi

If you like to send sms from your client (forms based application) you must do a PJC (plugable java component).. For sending and receiving datas from RS232 you can use a RXTX library (http://rxtx.qbang.org/wiki/index.php/Main_Page).
If you like to send sms directly from your remote database (I think) you can import apropriate rxtx jar library into your database and write down a java stored procedure..
Third way you can implement a java Class which sends sms and expose it as webservice on your remote server.. From plsql is easy to communicate with webservice and so you can also send sms..
I have done a java bean for Hypercom POS terminal which is connected over RS232 with forms application (using rxtx library)..
Edited by: peterv6i.blogspot.com on May 8, 2012 8:11 AM

Connecting mobile phone to my bt home hub

Hello can anyone help me please i have just bought a Samsung Galaxy S 2 and I have been trying since monday to connect to my home hub and it just wont work I can find my BT Home Hub on my WIFI available networks it asks me to enter my password which I did but it just wont connect.
Any help would be greatly appreciated.
Magsmitch

Hi are you entering the hubs wireless code ?
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

IP of mobile phone

Hello friends,
Can any one tell me that can I access the ip address assigned to my mobile phone while using GPRS?? Can I use same ip to connect mobile phone using server? i.e. can I ping to mobile phone from server using same ip ??
E-mail me on::[email protected]
Message was edited by:
sanketshinde

You could connect to http://www.whatismyip.org/ for instance to get your ip address. There is no general way to get it in midp.
Also note that a lot of mobile networks use NAT, so you won't be able to connect to it from the internet.

Is there a connection to connect from an Ipod plug to a mobile phone other than an Iphone ?

Can I purchase a connection that will connect an Ipod Nano 7th generation plug on a docking system to a mobile phone to charge the phone ?

No, As you know the only method is to connect the iPod to a charging source.Yo could purchase one of the portable charging source/battery packs and use the turn it on when yo are not home.

Connect Bluetooth with Samsung mobile phone headset?

I'm making a movie in Garageband and using the iMac internal speaker for recording my voice. I have a Samsung Bluetooth device I use with my mobile phone and I thought the sound would be better. I can't seem to get it to connect with my Mac. I have bluetooth sharing on, but when I go to the bluetooth set-up window, it doesn't recognize it. Am I doing something wrong, or is it incompatible?
Thanks for any help, I'm trying to avoid buying a new mic.

Have you tried pairing using the Bluetooth icon in the system tray?
Also make sure your Bluetooth drivers are up to date: http://mobilesupport.lenovo.com/be/nl/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g...
Jonas
Microsoft MVP: Windows Consumer Expert
Yoga Tablet 2 10 || ThinkPad X1 Carbon (20A7007MPH) || ThinkPad Helix (3698-6EU) || IdeaCentre B540
Twitter: @jonashendrickx

How Android v4.0 mobile phone connect to i-mac 10.7 ?

Hi,
I am using android v4.0 mobile phone. when I connect my phone to i-mac 10.7, my i-mac can't dectect
my phone? Actually, I need to transfer my photos from my i-mac to phone , How can I do that ?
Thanks.

Hi ,
The solution that get me going is as below:
The steps to add printer is via http://localhost:631
1.    From Safari, go to localhost:631 to enter cups (note proxy settings may need to be changed to allow this)
2.    choose Administration tab
3.    Add printer
4.    System asks for password ---- this is the username & pwd for MAC Account (Checkbox not to be ticked for remember option)
5. Choose smb option - Windows printer via spools
6.    Printer address : queue name as smb://servername.domain/queuename
7.    Printer name –Not to have any space between words (HPCP5225dn—all one word)
     8. Choose the driver on next screen and on the one after set printing defaults.
When set up this way, the test page for the printer may NOT work first time. Open Word or another application and print a document, you will then be asked to authenticate. Enter userid and password only (ie not domain\) and printing will work.
If you save the username and password it is saved in the User keychain - as it is per user it is OK to save and it won’t ask for authentication again.
Thanks for your help and support.
As of now I am facing another trouble while configuring the printer via server on 10.6.8.
1.If I use the same method as used for 10.7 , the job goes to Hold and asks for authentication and in this case the username is domain\username but problem is that I am unable to save it in the keychain.
So everytime a job is sent ,it goes into hold and resuming the job asks for authentication.
2. If I go via system preferences to add printer --it comes up with some NT_Status_Log-on Failure message or NT_Status_Bad_Network name.
Please suggest any inputs to work on.

Qosmio X500 - Cannot connect to by mobile phone via BT

Hi,
i have a Toshiba Qosmio X500, Windows 7 Home Premiun 64 bit.
The problem is when i use the bluetooth and try to send a file to my phone it wont work.
It searches and finds the device but wont connect to it.
I've read that there is a link for an upgrade that fixes this problem.
If anyone knows another way to fix this or has the link your help would be greatly appreaciated!!

>ive tried updating the drivers but it says i have the latest drivers
You have to remove it firstly from the system before you would install the Toshiba Bluetooth stack again!!!
Please check this!
After that enable the BT properly, search for the BT device, pair both devices (notebook & mobile phone) using an 4 digit code.
Should work

Using HP ePrint with mobile phone internet connection

Hello, I have a peculiar problem.
I have an HP Officejet 4630 e-All-in-One series printer and I want to set up HP ePrint.
I have internet connection for my laptop computer, which is the computer I use. It too is a HP. To set up your HP ePrint account you need the printer's code number which can be printed from the printer's control panel. Once you have the printer code, you can then enter it in to your account to add your device. My problem is that my interent connection is the mobile phone which I use to connect my laptop to the internet. The printer is then connected to the computer using either the direct wireless feature or using the supplied USB cable. Because of this, I can't obtain the printer's code, from the printer's control panel. I do not use landline internet connection as the mobile phone is used as a modem.
What do I do?????????
Can I just phone technical support and ask them to email my printer code??????
This question was solved.
View Solution.

Jagaccountant wrote:
... Can I just phone technical support and ask them to email my printer code??????
Hi,
No, this is not going to work and WON'T work at all. Your printer MUST be connected to the internet to allow ePrint to work. No point to send an email to printer and it is NOT there.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to connect PC to a mobile phone to make a call.

Hi all,
I want my PC to control the mobile phone (its a CDMA phone). I want to connect the phone with my PC through some cable, then I want to control the phone using the program running on my PC.
Like, I want my program running on PC to make calls through the mobile phones.
Does anyone have any idea that how can I do it, what API should I use, any sample code or example.
Thanks.

Except TextNow is another Voip service. Just like Skype, Viber, etc. It may be a good Voip product but it doesn't use the mobile cellular network which is what the OP was interested in.
http://support.textnow.com/entries/20588531-What-is-the-Difference-between-A-Tex tNow-Phone-Number-and-TextNow-Address-
Many iPad models now have exactly the same hardware as iPhones and should be completely capable of making and receiving calls and texts using a cellular network. Yet they cannot, because Apple limits this functionality through the ios.

Connecting mobile phone to 4.1 system

Similar Messages

Maybe you are looking for