Connecting modem and Shuffle at the same time?

My iPod Shuffle won't plug into a USB port while using the external modem, is there something like a small extension that would give me enough space to plug both in?
Thanks.
iBook G4, 800hz expired, Macbook. Mac OS X (10.4.4)

yes, there is a male-female usb extension cable sold on computer store.
Just pick up the length you need.
But the price is almost the same with the cheapest 2.0 usb hub (4 port), so you better consider the usb hub one.
Good Luck.

Similar Messages

Connecting USB and Charger at the same time

Hello guys, Is there any problem connecting usb and charger at the same time? after that, the Nokia Battery Monitor 2.0 shows 93% after full charge. Any ideia?

yes, there is a male-female usb extension cable sold on computer store.
Just pick up the length you need.
But the price is almost the same with the cheapest 2.0 usb hub (4 port), so you better consider the usb hub one.
Good Luck.

Cannot connect HDMI and microUSB at the same time

Hi, there is not enough space on ATV2 both ports are on top of each other is there any way around this so you can use HDMI and also microusb?
patrick63

As listed in the Tech Specs
Micro-USB (for service and support)
What are you trying to use if for?
The intended purpose is when there is a problem with the Apple TV (from the manual p.29):
•          If          Apple          T V          still          doesn’ t          respond:
•          Disconnect the power and HDMI cables from Apple TV.
•          Connect one end of a micro USB cable (sold separately) to the back of
Apple TV, and the other end to your computer.
•          Open iTunes on your computer, select Apple TV in the Source list, and then
click Restore.

Wi-fi connection on HP Deskjet 2540 and network at the same time?

Hello
Please can you tell me how to keep my connection to my wi-fi printer whilst connected to my Virgin Media Broadband? Every time I want to print I have to switch off the Virgin network connection and connect to the HP Deskjet Wi-fi, and then switch it back again to Virgin to browse or send emails.
Thank you for your help
AC33

Hey there @AC33 Welcome back
I understand you are looking to install your printer on your network, so you can use the internet and printer at the same time. By the sounds of it, you may be connecting the printer currently, using the Wireless Direct feature, which will only allow you to connect to the printer or the network at a time. Basically, the printer is acting like a network.
Here is a link for you to check out. It will help you install the printer on your network:
Setting Up the Printer for a Wireless network for the HP Deskjet 2540 and HP Deskjet Ink Advantage 2...
I hope this helps you, let me know the outcome
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car?

Hi there, Will be possible listen and charge at the same time my iPod shuffle in my car? I have got a jack going to my sound system the issue i would like to solve is charging at the same time

Since the shuffle (except for the 1st gen shuffle) uses the same "port" (the headphones jack) for sound output and charging, there is no way to do both concurrently.
NOTE: You can charge and play at the same time on the old white 1st gen shuffle that looks like a USB flash drive.

I have an iPad 2 (wifi 3G). Is it correct to use wifi and 3G at the same time ? Or one at time depending on connectivity? Thanks.

I have an iPad 2 (Wifi + 3G). Is it correct to use the Wifi and 3G at the same time, or one at a time, depending on connectivity? Thanks in advance.

Your iPad will use wifi first if available. If wifi is not available, it will use 3G.
 Cheers, Tom

Can i power my iphone from the mains and connect to my mac at the same time

HI
Here is my dilemma, my daughter dropped my wifes iphone in the bath and it will now only power up when plugged into the mains. When plugged in it cannott find the sim and according to the local apple store the wifi antenna is also broken.
We are not bothered about the phone it is the 1500 photos and videos of our girls which we dont want to lose. The phone hasnt been backed up recently and she is not registered with icloud so that is out the window.
So, i thought that if the phone could be powered by the mains and somehow connected to my pac at the same time i could perhaps get the photos synced and then the phone can be traded in at the store for a £119 replacement, thank you by the way Apple!!! you pay full retail for a product (£419) and all you get told is "your phones knackered, that will be £119 please"
It worht pointing out that the USB doesnt turn the phone on when connected to the mac.
Is there such a cable in existence which has two usb leads from the iphone dock connector??
I just cant beleive that the photos and videos cannot be accessed and saved by a company that always tells us they are cutting edge and ahead of the rest of the market, especially as the phone traded in will get, repaired, wiped and sold on as a refubed phone, if they can do that they can get us our files off.
Anyway, any advice, assitance, product reccommendations would be very very welcome.
Many Thanks

How, exactly, would you propose connecting it to both an AC power adapter and your computer when it has only one dock connector? If you don't want to set it on fire, I wouldn't try.
If it can power on when on AC power AND it can connect to either the cellular network or WiFi, plug it in and power it on and e-mail the photos to yourself. Not the most elegant solution, but it beats losing all of them. I assume you were not in the habit of backing up very often.

Actiance Vantage server duplicates the IM details and both Active Active Vantage servers connection is not established at the same time

Hello
Issue with the Actiance Vantage server.
Env: Lync 2010 Server , Vatage servers - 2 active , 1 passive
Commn: FE contacts HLB to reach Vantage servers
Recently we have added one vantage servers to the lync environment and made two vantage servers as Active.
After adding 3rd vantage servers and made two vantage servers as active , we are seeing the following behaviours:
1) archived messages are duplicated with different transcripts ID
2) Two active servers connections were not established at the same time. Only one is active at all times. There is four front end servers.
Request for suggestions.

Hi,
Did you receive any error message?
Please disable the third Vantage server and test again.
Please check if all services started for all FE servers and Vantage servers.
You can enable logging on FE servers for further troubleshooting.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Blinking green light and then orange and green at the same time...

I have an Ipod shuffle that was working good before and I don't know why I let it one month and after when I connected it to the computer Windows and Itunes didn't recognized it. It seems to function good because I can listen the songs that were before in the Ipod, and when I don't have battery I connect it to the computer and it seems to charge because after I have battery. The only thing is that when I connect it I don't listen that windows recognize it (like when I connect my USB key) and Itunes neither. Moreover there is a green light blinking two seconds and after green and orange at the same time (little lights) during one second. I can't restore it because it doesn't appear in Itunes.
Do you know what can do that???
Thx

Faites ceci:
- Retirez le Shuffle du socle
- Cliquez sur Démarrer, puis Bouton droit sur "Poste de Travail" et prenez "Gérer" puis double-cliquez sur "Services et applications", puis double-cliquez sur "Services"
-Localisez "Ipod Service", double-cliquez dessus, et cliquez sur le gros bouton "Arrêter" (Statut de Service Smile
-Rebranchez votre ipod, sur le socle.
-Sous Windows, effacez l'intégralité de son contenu. Ou alors faites un bouton droit sur l'icone du "disque" puis formattez.
-Lancez iTunes
-Ce dernier va détecter l'ipod et va vous demander son nom, avec une case en dessous "Remplir automatiquement"
-Laissez cette case validée !
-Pendant que l'ipod se remplit (il convient d'avoir des morceaux dans la bibliothèque iTunes) allez dans longlet "Réglages" de l'ipod, sous iTunes
-Cochez la case "activez l'utilisation comme disque dur"
-Cliquez sur appliquer pour valider cette option !
Vous pouvez maintenant éjecter votre ipod (ne le retirez pas du socle, cliquez sur le bouton approprié sous itunes !) et voilà, tout fonctionnera à merveille !

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

My Ipad mini does not see my printer. my wife's ipad2 does. We both use IOS8 and upgraded at the same time. How can I remedy this?

OK great info!
I found 2 possible ethernet to USB adapters:
By "Plugable": USB 2.0 to ethernet LAN wired network adapter - seems this will work, but I'll contact Plugable.
2. Apple USB Ethernet Adapter
Easily connect your MacBook Air computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your MacBook Air and provides an RJ-45 connector that supports 10/100BASE-T performance. BUT NOT SURE IF THIS WILL WORK ON ANYTHING BUT a MacBook Air…
One person commented:
This little gem used to be the device of choice for adding a second Ethernet interface to a Mac Mini Server and I'd been using one that way for about a year. After doing a software update to 10.6.6 it stopped working. Forewarned is forearmed – it appears that Apple is finally enforcing the MacBook Air system requirement.
Thanks for any additional comments.
Best regards,
Steve Schulte
Sunday 6 January 2013

My SB Audigy 2 card can't use headset and musicamplifier at the same time

Hi, i just bought a SB Audigy 2 [D400] and i have downloaded drivers and programs. I run Windows XP SP2.
The soundcard works fine but it is very very annoying that i physically have to change the jack in the green=line out jack from headset to musicamplifier when i want to use my musicamplifier and change back the jack in the green=line out from musicamplifier to headset when i just want to use the headset/headphones .
In the shop they told my that i can connect both amplifier and headset at the same time and then with creative software control whether there is sound in the headset or in the amplifier. But i can't simple get it work.
I tried to use the green to the amplifier and the headset/speakers in the black (line out 2) and then with creative speaker settings softeware choose headphones but still the ampliefier receive the sound and no sound in the headphones. Why? In fact no matter what configuration i try the headphones doesn't work.
But if i change the jacks so headset is in the green line out then only headset is working and the amplifier doesn't work no matter i put it in sort=line out 2 jack or orange=line out 3 jack.
Can somebody here tell me if it is possible or not to connect both headset and external amplifier and control by software which to play? and how?
please help, thx.
Michael

If you can have an ASIO compatible music playing system, then it might be possible to have system like you wish when using Creative Audigy 2 card. Since ASIO bypasses Windows Audio System, you can use both 'drivers' (ASIO - WDM/MME/DS) side by side.
Say you want to play a game (using headset /w mic) and someone other like to listen music at the same time. With ASIO capable system you can output your music for example to "center L/R (stereo) channels" and same time output sounds from other source (using MME/DS/WDM drivers) to normal output channel (Front L/R). Only thing is, you need to set your speakersystem to 4 or 6 (depending which other channel you're using) (and for better 'balance' to adjust "angle" on THX console. You get the THX console by installing Audigy 2 Zs software).
Try for example http://img332.imageshack.us/img332/463/djs9mo.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
Another option:
Say you want to play music through external amplifier and play game online with your headset + microphone (eg. others but you listen the music, you play games)
--> try free http://img332.imageshack.us/img332/4589/tbp7rz.jpg[/img] width="406" alt="Image Hosted by ImageShack.us" >
If you use ASIO on BeatPort Player you can select L/R individually from the list(s). Same rules as described earlier.
= You can play from 2 different sources simultaoneusly (ASIO + WDM/MME/DS) to two different outputs without disturbance. The other (WDM/MME/DS) source is set 'automatically' output to (Audigy) "green" port, and the other (ASIO) to "black" or "orange" port (as set).
.jtpMessage Edited by jutapa on 09-5-2005 05:30 AM

Ipod nano (5th generation) - want to use headphones and charge at the same time

I have an ipod nano (5th generation). Do I need a special set of headphones to use the headphone jack and charge the ipod at the same time?

The iPod nanos have a 30 pin dock connector and a headphone jack. When you charge the iPod you use the dock connector therefore you can use and charge at the same time. You cannot use and charge the iPod shuffle at the same time. You might have the two mixed up.

Problem with audio of my notebook. Audio works through pc speakers and earphones at the same time

Hi all,
thanks in advance for your advices.
I have a problem with my notebook (HP pavilion g6 2305 sl).
The problem is that when I connect my earphones the audio of my pc don't stop, hence I can hear (music, film, ...) both by earphones and speakers at the same time.
I tried to install again the latest driver audio, but nothing was changed.
I tried to use another pair of earphones, but nothing.
I have noted that if I connect the Jack at my pc, but not until the end, the audio stops from the speakers and goes through the earphones, but only if the jack is not completly inserted in the notebook.
I read a lot of forum on the web but I'm not able to find a solution for my problem.
(ps. the problem comes out suddenly, without any signal. I don't have installed any update or new software before the problem's start)

Right click on speaker icon, lower right screen.
Choose playback devices.
Select "speakers and headphones" as your default.
Disable "communications headphones".

Error Running Oracle Apps and Discoverer at the same time

Hello,
We are having trouble running Oracle Apps and Discoverer at the same time on certain user's machines. Here are the specifics:
The user opens Oracle Apps in Internet Explorer. The user then opens Discoverer in another Internet Explorer windows and receives the following error: Runtime Error! Program: C:\Program Files\Internet Explorer\iexplore.exe abnormal program termination
As a work around, I installed Firefox on those user's machines. These users run Oracle Apps in Internet Explorer and run Discoverer in FireFox. This has solved the problem in 99% of the cases. However, there is one user who is having FireFox using Discoverer freeze when running Oracle Apps in Internet Explorer.
Can anyone provide any insight on how I can solve these conflict issues so users can run Oracle Apps and Discoverer at the same time?
Thanks in advance for your help,
Carlos

Hi Michael,
I agree with you completely. It is reccommended to run 10g on a separate physical server unless you have sufficient resources to run on the same server (which even most large clients do not) Even then, I would recommend a separate server.
I should have put my comment in context :-)
a.) I was only stating that it was possible
and
b.) whether 10g is installed on the same physical server or separate should not affect the client browser crashing issue that was posted.
I do have an install with EBS11i and Discoverer 10g on the same physical server and it works fine (this is sandbox/ TEST). Most of my large customers have 10g installed on multiple physical servers due to load balancing (capacity).
I do work for Oracle. I try to help out on the forum when I can, but it is hit or miss :-(
I would be glad to discuss anything privately.
As for the issue at hand, I can reproduce the problem and here is what is occuring.
I have EBS 11i configured with Jiniator 1.3.24
I have Discoverer 10g configured with Sun Java plugin 1.4.2_06
1. If you launch EBS 11i apps and a form with MS IE, then the browser launches the form using Jiniator JRE 1.3.xx (whatever you have configured in AutoConfig for EBS11i)
2. Next, the user navigates to EBS 11i SSWA and launches a Discoverer workbook.
What occurs is a child IEXPLORE.exe process is spawned from the parent IEXPLORE.exe process and Discoveer Plus is launched. The parent iexplore.exe process will be attached to the Jiniator JVM. Now if Discoverer is configured with
a.) Sun Java Plugin or
b.)a version of Jinitiator that is a different version from what EBS 11i is configured with
then you may get this conflict.
It really is an MS IE/JRE conflict with Jinitiator and Sun Java Plugi and the way the broswers attaches to the JVM (IMHO) as this behaviour could be reproduced with other non-oracle java applets.
You can workaround the situation by:
a. configure EBS11i and Discoverer to use the same version of Jiniator 1.3.xx
b. educate the users to open one MS IE browser to connect to EBS11i and then open a second MS IE browser to login to EBS11i SSWA or Discoverer 10g Plus directly to launch workbooks. They need to to this by clicking on the icon and not using File >> New browser. Clicking on the icon will spawn a new parent iexplore.exe process that can attach to a second/different JVM. File >> New Window will spawan a child of the parent.
c. As you did use two browser versions. MS IE for EBS11 connection and FireFox for Disocverer 10g connection.
I would choose optoin b, so that you can use Sun Java Plugin with Discoverer.
Open to any comments. I hope that helps you workaround the problem. The ideal solution is to have EBS 11i use/cerified with the 1.4 or 1.5 JRE. In poking around, I see there is a related post to this on one of Oracle's EBS 11i Product Managers Blog.
See:
http://blogs.oracle.com/schan/2006/04/18#a23

Surf and Talk at the same time (AT&T Commercials)

So I see all these commercials saying AT&T has the fastest 3G network. I also see the commercials about being able to surf and talk at the same time.
Now I was almost positive that was crap but figured let me test this out again just to be sure. Sure enough, on the Edge network (which might be the issue, might actually work on 3G which is very limited with AT&T it appears), the iPhone won't talk and do surfing at the same time. You get "Cellular data connections are not available during this call" as the message on your screen.
So is this just an issue with the iPhone specific or is this just bad marketing on AT&T's part?

This is possible when connected to AT&T's 3G network, which is not available in most rural areas. I do this often.
http://www.wireless.att.com/coverageviewer/popUp_3g.jsp
Verizon's 3G network has better coverage, but it is fast as AT&T's EDGE network.

Connecting modem and Shuffle at the same time?

Similar Messages

Maybe you are looking for