Connecting more than 6 wireless devices to homehub...

how can i connect more than 6 wireless devices to homehub 3? my current cable provider allows me to have 9 wireless devices connected at the same time
is there a way to connect a wireless router to homehub 3 or do i need to invest in a modem router from another make that allows me the extra connectivity?

Hi you can have as many wireless devices as you wish the same applies to wired connection's if you use an Ethernet switch all you need to do is enter the wireless security code into each wireless device
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

  • Can Not Connect More Than One Device

    Does anyone else have the issue of not being able to connect more than 1 device to your wireless network without it timing out and resetting the router? I pay extra to have what they say is the fastest internet but it never works. If Apple TV is streaming Netflix my iPad, my laptop and my desktop all have to be off and not connected to the WiFi or the router resets itself. My speed test actually timed out because it was taking so long both times I tried it, a month apart. I had the same issues before switching to X1 and getting my new WiFi modem. If I call I just get the run around and have my modem reset a dozen times with the exact same outcome...

    It would help if you post the model of the device.
    Also look over the troubleshooting tips and post the downstream RF power levels, downstream SNR and upstream power levels on all channels.
    http://forums.xfinity.com/t5/Basic-Internet-Connectivity-And/Connection-Troubleshooting-Tips/m-p/1253575#U1253575

  • Can't connect more than one device.

    I just bought an Airport Express 2 gen from a friend and I have two issues: I tried to reset it to factory settings and could not do it. Tried holding the reset button for 10 secs, unplugging and plugging back in while holding the reset button, holding the button for a longer time and nothing worked. I had no choice but to create another network. Once created, I can't connect more than one device. If I have my MacAir hooked up the network and I try to get my Ipad in, the minute I type the network pass in my Ipad, a screen pops up where I have to log in with my internet provider account. When I do that, it will connect, but my MacAir will disconnect automatically.
    Appreciate any help!

    Things are a bit different with the 2nd Gen AirPort Express and other newer AirPorts.
    A Factory Default Reset is now the same as what was previously known as a "Hard Reset".
    Power up the AirPort Express and let it run a few minutes.
    Hold in the reset button on the Express for 10 seconds
    Release the reset button and allow a full minute for the Express to restart to a slow, blinking amber light
    If the Express is operating correctly, it will be back to factory default settings at this time.
    If you try the reset a few times and the Express will not return to default settings, the Express is defective.

  • Why won't my Time Capsule allow me to connect more than one device to the network at a time?

    Ok here is the shortest story I can come up with...
    Several months ago lightening struck my house and ruined the power cord for my old AIR PORT EXTREME....after replacing the power cable my wireless network began to prohibit more than one device at a time to connect to the wireless network.
    I replaced that network with a new TIME CAPSULE and it is doing the same thing.  I took my old AirPort Extreme to my work and it works like a charm.  My ISP says it is an Apple problem but I have had the same settings both at home and at work.  Work is great, multiple devices connect but home is one at a time and in order to connect ANOTHER device I have to power down one, and reboot the router and fire up the device I wish to connect.
    Any suggestions?

    I am running off a Fiber line....the unit that is a battery back up and appears to be a modem as well is called CyberPower CS24U12V-NA3
    Techincally, there is no "router" in my house, there is a LOCKED control box outside, a battery back up module in the garage that shows battery life and connection, then a cat5 outlet in my laundry room..All of which was installed by my ISP.
    I am using a 2TB Time Capsule running DHCP in Bridge Mode.  I can't find the software version but updated it while installing it within the last two months.
    Under Network Tab
    Enable NAT Port mapping is checked
    Under the Wireless Tab
    we have a 5ghz Network
    Radio mode is set to:  802.11a/n-802.11b/g/n (Automatic)
    2.4 GHz is Auto
    5 Ghz is Auto
    I hope this helps....

  • Unable to connect more than one device

    Hi.
    We have copper Broadband with a fairly decent speed (13MB) and a HH3.
    I run a desktop PC for general internet access but my wife uses an iPad and is always downloading films, music etc. We also have a BT Vision box which is connected via Ethernet direct to the HH3 (there are no issues at all with the Vision).
    The hub is located centrally within very close range of the devices with no major structures blocking the path, indeed wireless strength is excellent.
    For a long time now it has been the case that with one of us on, the other cannot use their device as the connection is either too slow or it actually knocks the other off-line. I used to run an Ethernet connection for my PC (my wife is wireless) but having read that the HH3 does not like mixed connections I bought a wireless dongle which initially seemed to help but now we are back to where we started.
    Re-starting the hub sometimes seems to help but not always and might just be a coincidence.
    Obviously it is very inconveniant being able to only use one device at a time.
    Does this sound like a hub issue?

    It could be a faulty hub because the HH3 should be able to handle multiple connections of both wireless and Ethernet without problem.
    The first thing do do is try a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds which can often sort out configuration problems.

  • Connecting more than one device to one computer

    Hi, I have an iphone 3gs and my son has an ipod touch. Here's the problem when updating my apps from my phone Im being asked for my sons passorword. So what happened to my account?
    1. How do I get my account back!
    2. How do I set itunes to use 2 devices to one computer?
    Thank you

    There is no device limit for the number of iPods, iPhones, and iPads that can be synced with iTunes on the same computer. Each device can have its own sync preferences with iTunes on the same computer.
    There will be a problem or something to take into account when there is more than one iTunes account used with iTunes and the same iTunes library on the same computer to download iTunes content from the iTunes store including 3rd party apps.
    iTunes includes an option to sign out from one iTunes account and sign into another account when there is more than one iTunes account used with iTunes on the same computer. If you and your son have separate iTunes accounts, when syncing your iPhone with iTunes, you need to be signed into iTunes with your iTunes account. Before your son syncs his iPod Touch with iTunes, he needs to sign into iTunes with his iTunes account.
    At the iTunes menu bar go to Store. If iTunes is signed in with your son's iTunes account, you need to sign out and sign in with your iTunes account.

  • Can I connect more than one device to home hub?

    I am a new user and have my PC connected to my home hub and all works well.
    My husband has just got an ANDROID and we want to connect as well. I thought I was doing it ok and entered the security key but all I get is authenticating and not much else and it does not connect. Have I missed something do I have to put anything else in other than the security key?
    It connects ok to the external BTwifi and BT Wifi with Fon but of course we are not supposed to do that.
    Sue

    it may be a problem with your Android (whatever model) as any home hub or WiFi router should take loads of other devices I am not sure there is a limit but I have 8 connected.
    If you have anyone else that has a tablet or phone that you can get them to test to see if the problem is with the hub or your android device.
    The only other thing I can suggest is that if it is a home hub 4 which also uses 5Ghz as well as 2.4Ghz some people have had problems with 5Ghz and if you can see both from your device selecting the 2.4Ghz may help.

  • WRV200 - Can't connect more than 2 devices

    Hey everybody.
    I have a WRV200 that usually has 2 wired PCs attached to it. Recently got a PS3 and Panasonic network camera, and I'd like to connect them to the wired interface to keep the wireless from getting bogged down. But, when I connect either (or both) of them while the PCs are plugged in, all the ethernet lights plus the internet light, blink on and off. I've been able to connect and set up the PS3 and camera when the PCs are unplugged though. No problem doing it that way.
    All devices are set up with static IPs, so the router definitely knows about them in some sense. 
    That's all the pertinent info I can think of right now.
    I'd sure appreciate some insights, because I really wanna throw the @#%& thing out the window right now. 

    I think you can upgrade the firmware of your Router,This will solve all your Problems.  To download the latest firmware for your router just login to www.linksysbycisoc.com/downloads, and save the Firmware file on your desktop Screen. Once you download it. YOu need to login to your Router setup page, Click on the Adaministration tab,click on the Browse button and click on Upgrade. Once upgrade is complited. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...This will solve all your problems.

  • Fifth Generation Airpot Extreme MD031LL/A can't connect more than one device

    I just came back from the Apple Store @ Cambridge, MA where I got a second fifth generation Airport Extreme Base Station (MD031LL/A) which is recognized by all the devices I have (Mac Pro, 2 iPhones and 1 Power Book) but I can only connect to the Internet via the Mac Pro. This is the second unit I try in a week and is just behaving the same way the previous one was and for which an Apple specialist at Apple Care told me "it shouldn't be behaving that way".
    2 Airport Extreme Base Stations malfunctioning in a row makes me wonder what other options are left for me...

    And here is the message I get after failing to connect to the Wi-Fi network. Notice how the bands went from 3 to 2 lines on the Airport Wi-Fi indicator next to the Airplane mode...

  • Adobe Edge Inspect is not letting me connect more than one device

    It saying that I need to Login or Upgrade to use the Full Version when my adobe suit is not the free trial and my account is pay through September of this year. And when I try to connect anyways, the pop up window is saying "Use of multiple devices is an Edge Inspect full version feature. Upgrade now to connect multiple devices concurrently". Let me know why this might be happening. My Chrome Version is 35.0.1916.153
    Thanks!
    Jen.

    Edge Inspect
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Why I can not connect more than one device at a time with a monthly subscription?

    Yesterday I bought a monthly subscription (https://store2.adobe.com/cfusion/store/html/index.cfm?store=OLS-ES&event=displayProduct&ca tegoryPath=/Applications/EdgeInspect) and I got the confirmation of the purchase but I recognize Google Chrome I have synchronized devices but then only see one at a time, not displayed on all at once, can you help me?
    Thanks in advance.
    Message was edited by: dpcani_marble

    Good afternoon where should be logged? In Chrome I'm logged in adobe.creative.com and many times I restarted Chrome and still not working ...

  • Adding more than 2 devices to wifi

    Could you please guide how to connect more than 2 devices? To use the 2 rd phone need to switch wifi on either the laptop or the other phone

    You can connect any number of wireless devices. You do not need to switch off other devices.
    Make sure you are connecting to your Homehub network and not BTWifi. Your Homehub network will be something like BTHomhub5-xxx
    See link how to connect.
    http://bt.custhelp.com/app/answers/detail/a_id/9692/~/how-to-set-up-a-wireless-connection

  • Cant Connect more than 8-9 devices

    I have the original "Mushroom" Airport. Why can't I connect more than 8-9 devices at a time? Tech specs says I can connect up to 50. But havent been able to do more than 8-9 depending on connection order.
    I'm trying to connect the following
    2 Wii's (Though only 1 would be active at any given time)
    2 MBP
    2 iPads
    2-3 iPods
    2 iPhones
    1 PC Laptop (win7)
    1 Wireless Printer (HP)
    I'm running all updated softwares, SL and Airport. and including softwares on the connecting devices.  Any thoughts, tips...

    I have the original "Mushroom" Airport. Why can't I connect more than 8-9 devices at a time? Tech specs says I can connect up to 50. But havent been able to do more than 8-9 depending on connection order.
    I'm trying to connect the following
    2 Wii's (Though only 1 would be active at any given time)
    2 MBP
    2 iPads
    2-3 iPods
    2 iPhones
    1 PC Laptop (win7)
    1 Wireless Printer (HP)
    I'm running all updated softwares, SL and Airport. and including softwares on the connecting devices.  Any thoughts, tips...

  • Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    Can I use a USB hub to connect more than 1 hard drive/flash drive device to the EA4500?

    That's not possible, it was designed to handle one device at a time. 
    I don't work for Cisco. I'm just here to help.

  • More than one device connected?

    I am testing out a project for a mobile device and  when I package the apk and attempt to launch it on my phone, I get an error message sying that it can't be done because I have more than one device connected. I only have one device connected.
    I've tested this project before n my phone and it launched as it was supposed to, but I added a document class to the project and think that might be causing the problem. Previously, I added all of my action script to a keyframe on the timeline, and everything worked fine.
    I'd like some feedback as to whether or no the document class issue is the likely problem and how to get around it. If that's not the problem, I'd like to what what might be going on. As always, any help is greatly appreciated. Thanks.

    using a document class is not the problem (though your document class may be a problem if it has errors).
    use a file explorer to see if your computer lists more than 1 connected device.  or restart your computer to reset its external connections.

Maybe you are looking for

  • UserExit for MIRO transaction

    Dear All,            I have to Change the Base Line Date in MIRO transaction with the GR Posting Date while booking the Incoming Invoice..i.e BSIK-ZFBDT date i have to change it with MKPF-BLDAT... I have tried all of the UserExits for MIRO transactio

  • How should I incorporate 60p clips into 24p multicam clips?

    I shot a music video recently on a 7D. I have three variety of clips: 24p 24p shot to slow playback, which needs to be sped up to 132% for sync 60p that needs to be conformed How should I incorporate these clips into 24p multicam clips. Do I do all t

  • Purpose of defining "components" and their use

    On double clicking the Web Dynpro Component, we see many objects defined under "Used Components and Implemented Interfaces". What is the purpose behind these components and how do we use them in our application?

  • Trouble adding Audiobooks in iTunes 12.1.2.27 with OSX Yosemite 10.10.3

    Hello, I am having Trouble adding Audiobooks in iTunes 12.1.2.27 with OSX Yosemite 10.10.3, I downloaded 4 Audiobooks from Audible, Synced my iPod but the new Audiobooks do not show up in either the Audiobooks or Music section of my iPod after I sync

  • RSS upload

    I've follow the small instructions on enabling RSS feed in CPS. Edited the settings.xml file to reflect relevent settings. Contribute is set up fine and all working. I added a user to CPS. Added to the 'other services' the RSS url given in the help f