Connecting more then one client computer to TC

Hello all,
I am upgrading from an Airport Extreme to TC 2GB.
The problem I am facing is that while everything works fine on the Airport Extreme, when TC is connected only one computer can use it. My question: how do I open the network to two more clients?
A bit more info, with maybe some clues:
The computer connecting is an iMac. Unable to connect are a MacBook Pro and an ipad.
TC gets it's connection from a TNN Aztec 600z modem with one enterence, which is, then, connected to an Audio Codes devise (voice over ip phone line) and then to the TC.
This is a DSL connection.
The MacBook Pro sees a network, connects to the same wireless netwrok as the iMac, with a Green light appearing in the Network CP next to "Wirless", but the browser can't connect.
Nothing changes between the Airport Express and the TC set up, in fact I even tried it with the same exact wireless network name.
Airport utility can connect to the TC and control it, Version 7.6 is installed. Still with AE everyone can connect but with TC only one machine.
TC is set up as a "bridge". all other set ups result in loss of connectivity to all machines.
I would greatly appriciate any and all insights, this is exremely frustrating and somewhat bizzar.
thanks,
Amit

You will need to explain a few more things.. you seem to have both extreme and express.. is this right or a typo??
Was the extreme also setup in bridge?
I want the IP address of all the computers/devices when connected to the Airport .. and having internet.
I then want the IP address with gateway and dns of all the computers/devices when connected to the TC.
Have you rebooted everything.. starting with modem.. voip ata, TC and computers/devices in that order, after you place the TC in the network. If not please do so.
Running the TC through the ATA could be the problem. What is the IP address of the ATA, and is it working as a router?
You will do much better either bridge the modem.. use pppoe client on the TC. (if that is allowed by your ISP). Then plug the ATA into the TC. You may have too many devices competing for IP address and router duties.
An alternative setup..
If you have an extreme.. as per your first sentence, and everything is working, you can simply plug the TC into that in bridge.. you will then need to sort out the various wireless overlapping channels etc. But the basics should work.

Similar Messages

Can you connect more then one external screen to a mac with one mini display point?

Does any one know if you can connect more then one external screen to a mac, with one mini display point?

This company has a dual monitor solution for DisplayPort;
http://www.matrox.com/graphics/en/products/gxm/dh2go/

Can I connect more then one cDAQ-9188 in the same network?

Hi, I have one question for you.
Can I connect more then one cDAQ-9188 to moxa EDS-G205-T for querying simultaneously in the same PC?
thanks in advance for any response.

You will need a network switch and make sure they are different IP Addresses, but same subnet.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

B85-G43 A2 boot error when connecting more then one SATA driver

Hello everyone please help me.
As the title says, whenever i connect more than one sata driver (hdd or dvd) i get te A2 boot freeze....
Already changed cables, hard drives, and problem persist!
Sorry for my bad english, not my main language.
Board: MSI b85-g43
Bios: c.40
VGA: amd 7970 black edition
PSU: xfx pro1000w
Intel Core i5-4670K
MEM: HyperX 1600 8gb
HDD: kingston 120gb ssd and two SATAS
OS: Windows 7 64bit Ultimate

Svet, thx for replying.
I'm a noob here and have some doubts about this steps...
1.) >>Use the MSI HQ Forum USB flasher<< (Ok got it.)
A.) Download the attached archive and place it on your desktop. Do not decompress. (Ok got it)
B.) Download and install the Forum flash tool. (MSI HQ Forum USB flasher?)
C.) Insert your FAT32 formatted usb stick. (Ok got it)
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled. (win 8 options??? i'm running on a win7 ultimate 64bit)
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive. (Ok got it.)
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash. (ok got it, change boot sequence to USB and follow the directions.)
Yeah i know a lot of doubts, sorry for that, Working all day and at night i have to go to the university.
Thank you for your time!!!

How To connect More Then One database

How To Connect More the One Database In Single form.
I want to use Access And Oracle In the Same Form.
I want to Transfer data from Access file To oracle database.
Chirag

Hi,
You can do this using EXEC_SQL package. Please see Note 115540.1 on metalink which describes how you can connect to Ms Access and Oracle using EXEC_SQL.
Regards
Kavitha Prakash
Oracle Support

How to access more than one client computer behind router

I am new to ARD and have successfully logged on to a client machine at the office. I would like to access another machine behind my router. I am using pors 3283 and 5900 to access initial computer which works find. Can it be done with another computer. I have a fixed IP and run an ethernet network. Not sure what else I can tell you. Hope somebody can help?

If your workstations get their addresses from an NAT device rather than being "real", the ports also need to be forwarded in the router to the workstation's internal IP address. ARD uses port 3283 for the reporting and updating function, so if your Macs are getting their IP addresses through NAT, since you can only forward a port to a single workstation, as of today you can only get reports, push package/files to etc. for a single workstation.
ARD uses the VNC protocol for observation and control, though, and there are a range of IP addresses for that protocol, starting with 5900. ARD uses 5900 by default, so that port would be forwarded to the first workstation. You would, I believe, need to install VNC servers on the systems (since the ARD client cannot listen on any port other than 5900 while VNC servers can be set for other ports such as 5901, 5902, etc. You would then forward 5901 to the second workstation (and on to 5902, 5903, etc.). You can then use the following information:
Remote Desktop 2: How to specify a port number for a VNC client
to connect.
The only other options available now are: 1) to run the ARD administrator on a workstation on the network, and then take control of that system from outside, either via VNC or another copy of ARD, or 2) set up a virtual private network (VPN) so that when you connect from outside, your admin system is officially part of the local network.
Hope this helps.

Connecting more than one wireless computer

I have been trying to connect a second wireless computer and have failed. I have followed the instructions and is not working. The computer see's the router, but the router does not seem to see the computer. please help. the linksys easy link does not see the second computer. no matter how often i type in the wep key, the second computer just will not sign on to the router.

Check the Ip address on first computer .... ideally it should be 192.168.1.1 ..try to ping the gateway address ..... if getting proper replies .... try logging to setup page of router ..... let me know how far it works ....

Connection of more then one device to a PC

Hi,
I have a product which need to work with 4 devices (no specific model - each time can be a different device[s]), at the moment we are using the PC Suite, and we found a limitation that only one device can be connected to each server.
Is there is away to connect more then one device to a PC using the PC suite?
Thanks,
Idan

As far as I know the short answer is no. The same applies with acyive sync and windows mobile. You can only sync one device at a time as far as I know.

Installing more then one HP All in One networked printer on one computer

I want to be able to install more then one networked all-in-one printer on a single computer.
This is need to be able to move from home office with one all-in-one to a client's location
with another all-in-one but a different model.
I have been told in the past that I can connect one via network connection and one via USB
but this is not an acceptable solution because the printers are networked and used buy more then one system
at a time.
I don't think this is a unique situation for consultants or moble workers.
Is there a way to do this with networked HP all-in-ones printers?

What are the printer models and your operating system. I am using both the Photosmart 2610 and Officejet 7410 networked here and have additional drivers installed for a K60 that is at another location I occasionally visit. Typically you would install the most recent driver and install the printer, then run the installer again and specify "Add printer".
Regards,
Bob Headrick, Microsoft MVP Printing/Imaging
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Connect a PC more then one internet connections

Hi all members of JAVA forums.
I am a computer science student.I have two queries of network problem the first one is. If i have more then one internet connection i want to connect all connection of internet with a single computer to increase the internet speed.And the second question is.When i start downloading in the initial position of downloading i can see the speed of downloading is very good but after few seconds the speed will be slow i want to make the initial position constant for gain high speed downloading is it possible.Please help me.tell me something about network hacking.

Ankitbill wrote:
If i have more then one internet connection i want to connect all connection of internet with a single computer to increase the internet speed.Rather than attempting to combine several smaller pipes just get one larger pipe.
When i start downloading in the initial position of downloading i can see the speed of downloading is very good but after few seconds the speed will be slow i want to make the initial position constant for gain high speed downloading is it possible.Does your browser use prefetching?
tell me something about network hacking.[http://en.wikipedia.org/wiki/Hacker_%28programmer_subculture%29#Definition]
or
[http://en.wikipedia.org/wiki/Black_hat#Black_Hat_Hacker]?

Connect more than one computer to a time capsule volume?

Hello. I am considering buying an old time capsule (500G, 2nd generation) as a little in-house server to store data that need to be accessible for more than one work station. Is it possible to connect more than one work station to one time capsule?
Thanks

While it is possible to connect more than one computer to the Time Capsule......I would not recommend that you buy the Time Capsule that you are looking at.....unless you know that the owner has replaced the hard drive and power supply.
Most of these models never made it much past a few years of operation, so if this is an "original", you have a hint of what will happen not long after you purchase the product.

Connecting more than one ipod to one mac computer

Can anyone please advise me on how I can connect more than one ipod to just the one mac computer. I need to set up 3 ipods to work on the one mac computer but each with there own itunes library. thanks

When the iPods belong to two users, there are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. Each iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists.
Method two is to set your preferences so that either one or both iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
Another option when using a single library is to set one or both of the iPods to manual update: Managing content manually on iPod
Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPod. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes

Can i back up more then one computer

can i back up more then one computer to my Time Capsule?
if so, how do i set it up?

Time Machine will create a separate file for each computer.
Are the two computers with a same name ?

Sync to more then one computer

Hello,
this may sound like a silly question, but I was wondering if you can sync the iPhone to more then one computer.
I have a laptop, and a iMac, both are synced to keep each others content merged and up to date.
I want to get some of the music which is on both locations on my iPhone. in the photos and music areas .
can this be done?

No, not for music. The phone can only be synced to ONE music library, but contacts, calendars, and ohotos can be synced to multiple computers easily (Windows, Mac, or both, doesn't matter).
I think it's possible to copy the files form one of your computers to the other (almost like you would do if you got a new computer and were transfering your music library to the new one) to consolidate your library all on one machine.
-SB

Can I have more then one MVIEW site connected to single master site?

Hi,
I need one help from your end.
Currently I am working on Basic Replication.For that I am using Read only Materialized views.first i tried with one master site & one Materialized view site its working fine,Can I have more then one MVIEW site connected to single master site referring to same database ? if so how to achive this one..

Actually one of my senior told me that you need to change number of OPEN_LINKS value like that so for that reason I asked this question.
Still that problem not solved..
I will explain what are all the things I did ok.
IN MASTER SITE:
I am creating read only MVIEW's.
first i created one user repadmin and have given
1>execute any procedure
2>dbms_repcat_admin.grant_admin_any_repgroup
3>dbms_repcat_admin.grant_admin_any_schema
4>select any dictionary
and all other grants to repadmin user
then I changed global_name = 'zxincmp' on Master site.
Then I created mview log for each table (for 85 tables) & then I created mview's for that table on Master site itself. later I took a dump of these 85 mview's . then I transfered this dump to one of my mview site.
IN MVIEW site:
I created one user zxdbp_55 and all the above rights are given to this user & i created one public dblink
"zxincmp" using "TO_CMP"(master site).Then I imported that dump which i took from master site.
then i created one private link zxincmp in one of my mview site.then i used DBMS_REFRESH.MAKE('')
to refresh all my tables & to set the interval..
after that i created index on the mviews..
this will works out fine for single master & single mvirew site.but I tried with the same procedure to prepare one more mview site,everything is fine but main problem is second mview site is not getting refreshed automatically,i need to do refresh manually from enterprise manager.. then it will get refreshed.
how to overcome this problem? I am using same db name ,dblink,refresh group for both the mview site will it affects anywhere?
Thanks & Regards,
Hanumanth.

Connecting more then one client computer to TC

Similar Messages

Maybe you are looking for