Connecting multiple C4C tenants to same HCI system

Hello Experts,
Please note that we already have a Cloud For Customer (C4C) system connected to our HCI system which is connected to our ERP system.
How can I connect another new C4C system to the same HCI system as above which connects to the same ERP backend system QEC.
Would this new C4C system use the same tenant/worker nodes or will there be a separate new one be created for this new C4C system.
Please let us know what is the best possible approach.
Regards
Indrasish

Hi Indrasish
THere are probably a couple of options. One is to adjust HCI to send to two receivers. We'd need to look more at how the data needs to flow.
The other is to have duplicate setup -the following is what we do for a training environment with mutliple C4C's connected to one HCI and one ERP:
* C4C tenants have the communication system for ERP that points to HCI
* If you will have the same iflow from the ERP to each tenant, e.g. material master from ERP to C4C tenant1, material master from ERP to C4C tenant 2 - then you need to do the following:
*** HCI import the iflow, rename the iflow and the manifest. When you deploy you will also need a unique name. for example: /cxf/ERP/COD/ADR3MAS03_TR99 - deploy the service with the extension
*** in ERP in the RFC destination to HCI you need to also adjust the RFC dest, for example, /cxf/ERP/COD/ADR3MAS03_TR99 so that the deployed iflow name matches.
*** the deployed iflow also has the updated URL for the related C4C tenant.
In this situation you have duplicate iflow for each C4C tenant. The other option is to use one iflow and have two receivers, this would assume everything always goes to both tenants.
Does this make sense or is it confusing?
-ginger

Similar Messages

Connecting multiple ECC Clients on same ECC system to BW system(s)

Hello.
We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about? Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'? Any and all comments are welcome as we have not yet acted on our ideas yet.
Thanks very much for whatever comments you might provide,
Geoff.

We are considering connecting our Dev BW system to multiple clients on the same Dev ECC system. This connection would be for a limited time. We are wondering what the effect would be on the ECC system after we 'disconnect' our BW system from one of the clients.
No impact on the BW system. The only thing that you will have to take care of is that any process chains which fetch data from this DEV ECC system should not be put on periodic cycle because after disconnecting the ECC system, these would start failing.
Another thing we are considering is to create a seperate BW sandbox system and to connect that to a client on our Dev ECC system. The Dev ECC system will, at the same time, have a connection to a client on our existing Dev BW system. For example, having DEVBWcnlt100 -> DEVECCclnt100 and SNDBWclnt200 -> DEVECCclnt200 where DEVECC is a system and DEVBW and SNDBW are systems of their own. Our Sandbox BW system will have a limited life and at some point be taken down and no longer be a valid source system for the DEVECC system. We are concerned about what the impact would be to the DEV ECC system's client independent data once the Sandbox BW system is disconnected and taken down permenantly. Is 'residual' client independent data something we need to be concerned about?
Again no impact on ECC system. As for the client connected earlier to sandbox system, just clear all the queues in RSA7, LBWQ
Is having two different BW systems connected to ECC clients on the same ECC systems a 'bad practice'?
No its not at all a bad practice

Connect one JAVA ADS instance to multiple clients from the same ABAP system

Hi,
Does anyone know whether it is possible to connect multplie clients from the same ABAP system to a JAVA instance running ADS?
If so how do you setup the java destinations in Visual Admin and SM59 RFC connections?
Any help is appreciated,
Sander

Dear Sander,
this is always the case if you arrange the ADS connection.
You have to set up the RFC connection 'ADS' in ABAP side and this connection/destination is client independent. So you can use this from all clients of your abap system.
On Java side you have to arrange the already mentioned FP_ICF_DATA_<SID> destination. On the ABAP system and client (you specify in this destination) you have to maintain the user ADS_AGENT and your templates should also exist on this client. If there is no client defined, the default client will be used.
Regards
Istvan

Tries to connect multiple times at the same time a...

Tries to connect multiple times at the same time after trying to reinstalling software.

Hello,
Assuming that you use a Web version (this information MUST be provided in any post), you have 2 ways to run reports:
1. the Run_Report_Object built-in
2. the Web.Show_Document() built-in
Francois

Connect Multiple Ingrian server in same JVM

Hi All,
I have faced an issue where I have to connect multiple Ingrain server depending on some choice in same JVM.However I can able to set one server for jvm by placing the IngrianNAE.jar and IngrianNAE.properties in jre/lib/ext and every things running well, but if I tried to modify the Ingrain properties file during runtime through System.setProperties(), it always pick the old value instead the new one. So my question is that whether it is possible to configure for same JVM or not.
Thanks & Regards

Any Inputs...?

2 clients of 1 apo system connecting to 2 clients in same ECC system

Hi
We have a requirement at our end as below-
1)We have 2 clients in our APO Developement system and they are using BW functionality of APO
2)These 2 clients need to talk to 2 different client in our ECC System for ex:- APD has 2 clients(100 & 200) and ECC has two clients(101 and 201).
We need APD 100 to talk to ECC client 101 and APD client 200 talking to ECC client 201.
The query is - Is this possible to do the same .
If yes,can anyone guide me with some required documents

Hi sunny
One more query :-
The scenario is we want to connect 2 APO systems to 2 different clients of same ECC box
For Ex:-
ECC 100 ---> APD100
ECC 200 ---> APT200
There is only 1 ECC box with 2 clients.
I am not sure if we have some restrictions with regards to BW of APO connecting to 1 ECC box.
Do you have any idea if there are some issues while doing it as we will have 2 APO-BW client talking to 2 clients in ECC
Thanksbasisadmin

Simultaneously Connecting Multiple Tables of the same Database to Textboxes of the same Form using a single ADO Control Code using VB6 Enterprise Edition and MS Access 2007

Iv 10 Tables consisting of atleast 10 fields each in a single Database. Bt, Im only able to connect 1 table at a time to a form using an ADO Control. Im able to add data from table 'student' to text-boxes in my form. Bt, hw can I add data from field(0) of
Table 'Student' to Textbox1 and data from field(0) of Table 'Marks' to Textbox2 using VB6??
This is the current sample coding iv got to connect a single table to a form:
Global con As New ADODB.Connection
Global rs As New ADODB.Recordset
Public Function Connect()
If con.State = 1 Then con.Close
con.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + App.Path + "\bca.mdb;Persist Security Info=False"
End Function
Private Sub Add_Click()
If rs.State = 1 Then rs.Close
rs.Open "select * from student", con, adOpenDynamic, adLockOptimistic
rs.AddNew
rs.Fields(0) = (Text1.Text)
rs.Fields(1) = (Text2.Text)
rs.Fields(2) = (Text13.Text)
rs.Fields(3) = (Text4.Text)
rs.Fields(4) = (Text5.Text)
rs.Fields(5) = (Text6.Text)
rs.Fields(6) = (Text7.Text)
rs.Fields(7) = (Text8.Text)
rs.Fields(8) = (Text9.Text)
rs.Fields(9) = (Text10.Text)
rs.Fields(10) = (Text11.Text)
rs.Update
MsgBox " Record Added"
End Sub
What can I do to add fields from 2 different tables to different text boxes within the same form using a single ado control using vb6 and MS Access 2007??

Hi,
Since VB6 product is not supported in this forum, you may go to these forums for support:
#Where to post your VB 6 questions
http://social.msdn.microsoft.com/Forums/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions
Thank you for your understanding.
Best regards,
Franklin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Connecting multiple NMEA sources to a single system

Hi,
I am trying to interface multiple NMEA sources in my system, my Labview program hangs after sometime if I do not have provision for resetting it manually
Pls help me out

What are these sources? How are you talking to them? What does your code looklike?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Can one connect multiple NetStreams to the same peerID?

Does it make sense to have two separate netstreams connected to the same remote p2p connection?
I think I would like to separate the audio and video publishing and playing so that I can fine tune permissions (e.g. publish audio but not video to some users but not others).
Equally, are there issues with publishing two separate NetStreams on the same p2p connection?
Initially I thought this would be possible, but I am having problems playing streams when connecting users on different ip addresses.

You can play or publish as many streams as you wish on the same connection. Just mind the bandwidth.
However, publishing audio and video on different streams may not be a good idea as they're sure to be out of sync.
To save bandwidth and play only the audio of an audio/video stream set NetStream's receiveVideo to false.
Or, in your fine-tuned permissions scenario, you can publish one stream with audio only and one with audio/video. A little redundant but audio datarate is small and may be worth it.

Connecting multiple DAQs into the same computer

Hi,
Im working in a project where i wil need to connect more than 300 digital signs with a USB port.
I was looking for options, and found two that i liked, but i dont know if LabView will have troubles reading all the signs from different DAQs.
My first option is the USB-6501 (with 24 digital I/O), where Ill start doing the config, but if it works for what im looking for, i was expecting to repeat the same config in a total of 13 DAQs
My second option was, the High-Density Industrial I/O for USB (96 channels digital), and have in total 3 DAQs with an extra of the USB-6501 to complete my set of signals.
Can I connect more than one DAQs into the same computer? Meaning that all the DAQs will be working into the same LabView app?
Regards,
LD
Solved!
Go to Solution.
Attachments:
High-Density Industrial Digital I_O for USB – 96-Channel, 5 V TTL_CMOS - Data Sheet - National Instruments.pdf ‏1126 KB
NI-Datasheet-ds-135.pdf ‏525 KB

Those modules are static DIO, so the bandwidth of the USB shouldn't be an issue. As nyc mentioned, you might run into problems with the current draw on your USB port. Definitely get an independently powered USB hub.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How connect multiple swf in the same app for iOS

Hello,
i have a problem.
i have a lot of swf file each one is linked to another: i have a menu page with botton linked to different games (one swf for game).
Now i need to convert all of this in an app for iPad.
My question is: which is the easiest way to create link between all my swf files?
I read a lot of things but i really don't understand how i can move.
Thx for Help,
Stefano

ok, this is the way to add file in my app (if is correct i already have the appname.xml file);
but what about navigateToURL? can i use that or i have to use another script? can you make me an example of script ?
using this script i found the following problem:
var _urlRequest:URLRequest = new URLRequest(“mySecondarySwf.swf”);
var _loader:Loader = new Loader();
var _lc:LoaderContext = new LoaderContext(false, ApplicationDomain.currentDomain, null);
_loader.load(_urlRequest, _lc);
addChild(_loader)
using this script testing the app on computer the new swf is added on stage, but unfortunately i see the object of first and of second swf (overlapping...and i don't want that)
but publishing the app for testing device (ipad) the second swf is not loaded on screen...
what is wrong?
thanks

Two Tracks for the same Runtime System?

Hello,
can you please tell me if it is allowed to connect two tracks to the same runtime systems?
We have already a track connected to our systems. Now we have created a new track to deliver different content to those systems. We wanted to connect the new track to the same runtime systems. Our basis team told me that a where-used message came up that told them "The following runtime systems are already used elsewhere in the CMS domain".
Can you tell us if we will get problems because of this?
Thanks in advance,
Br,
Michael

Hello again,
ok now, thats something completely different CRM modification is always special.
To be honest i cannot tell for sure what will happen. As far as i know the default deploy strategy of NWDI is "deploy any version" which means NWDI will order SDM to just deploy not regarding any SDM Version (you are on a 7.0x System right?)
So it should be possible if everything else, excelt those 2 DCs is the same things should work. But if not the last deplyoed version of the shared DCS will be active. Which might lead to problems then.
As far as you described, the setup is as the CRM modification guides mentioned.
My first thought is that you are not forced to use CUSTCRMPRJ as SC name for the projects as far as I know. OS maybe the leanest thing would be to just use CUSTCRMPRJ_light (.o)) for the second track.
Hmmm not sure if this is a good idea or thought to the end. I don't have the CRM modifications guide at hand at the moment. But I guess there was a part where something was mentioned similar to this.
After all I have to say:Sorry. I can't give you solid, reliable tip/advice for this case. Maybe my thought will help you.
Or maybe someone else knows better.
Have a good time
Jan

Multiple DataTargets in the Same BI 7.0 System to One DataSource

Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system? I have searched the forum, but I couldn't find relevant posts. If I am not wrong, until BW 3.5, once a DataSource is assigned to an InfoSource, it can not be assigned to any other InfoSource of the same BW system. I have heard that this has changed in BI 7.0 with the new DataFlow concept.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)? What source systems currently support this feature, if any? What are the appropriate tables in the source system that I need to look at to do further investigation?
All the useful inputs regarding these questions will be rewarded with points. Thanks!
Sameer

Currently, I do not have access to BI 7.0 system. I am wondering whether it is possible to connect MULTIPLE DataTargets of a single BI 7.0 system to ONE DataSource in the source system?
Yes, it is possible.
Transformations and DTP's are Source - Target specific.
The current requirement is that multiple DataTargets of a single BI system need to get DELTA data from the same DataSource in the source system. If this is technically possible in BI 7.0, should the source system also support such an assignment (since the DELTA load timestamps are maintained in the source system)?
Data is extracted into PSA from the sourcesystem and is taken from there to different targets connected using diff transformations. If the datasource works on timestamp then it all depends on how the data is transformed to diff targets from PSA.
What source systems currently support this feature, if any?
ECC, irrespective of sourcesystem it all depends on how the datasource functions as data is only extracted till PSA.
What are the appropriate tables in the source system that I need to look at to do further investigation?
Datasource properties - ?? ROOSOURCE...

Possibility of connecting multiple BW systems to single ECC system

Hi all,
I have a requirement in my company to connect multiple BW systems to single ECC system. Would like to confirm whether this may not be supported by all BW extractors in particular the delta mechanism?
For logistics extractor in ECC side in RSA7 it stores BW System as target which shows they support multiple BW systems as target, but for FI extractors which keeps delta timestamps in BWOM2_TIMEST table, it doesn't store the target system. I'm afraid if we connect multiple BW systems to single ECC system, some of the delta records might go to one BW system and some others go to the other BW system when we execute delta load in both BW systems.
Thank you very much in advance.
regards,
arie

Hi,
You can very well connect multiple BW systems to single ECC system and you will not miss any delta as well. In the source system for each delta data source a delta queue is maintained for each target system.
for e.g. I have two BW systems ABW and BBW connected to AEC system then for 0FI_AP_4 data source we will have DQ1_ABW and DQ2_BBW as two different delta queues (I am not following any naming conventions, actual names will be as per the target system logical name).
The settings maintained in BWOM2_TIMEST table are across the system and they define some global settings e.g. till what time the FI data should be extracted in BW system, for e.g. the time maintained is 2.00 AM then though you do extraction from multiple systems same data will be extracted till next time interval occurs.
In summery you can very well connect multiple BW systems to a single ECC system.
Regards,
Durgesh.

XI and PI connecting to the same ECC system

I had read this thread XI and PI
Currently, our ECC is connecting to XI. In Integration Engine config of ECC, role of business system is "Application System". In XI, role is "Integration Server". If we need to add a PI and connect to ECC, what should be done or what is the workaround that can make XI and PI connecting to ECC at the same time?
Thanks.

Hi Mark,
Thanks for the suggested blog, I need some time to study this. I do not understand why 'standard' integration server is defined as 'Application System'.
I also need to study the limitation of SPROXY on SAP application server refer to only one XI/PI system. May be the issue of my scenario is not just connecting multiple XI/PI to ECC system.
The scenario:
Maximo MEA 6.2 <-> XI 3.0 <--> ECC (current)
Maximo MEA 7.5 <--> PI 7.x <--> ECC (to be added)
Any input or experience sharing? Thanks.
Regards,
Donald

Connecting multiple C4C tenants to same HCI system

Similar Messages

Maybe you are looking for