Connecting multiple devices to one speakerset

Hello,
I want to connect my xbox 360 and my laptop to one speakerset. This doesn't need to be a surround set but both the 360 and the laptop output via composite connections (I don't know if thats the right description of those connectors but they look like this: http://www.comprousa.com/New/en/faq/images/audio_cable_small.jpg
Can this be done with any speakerset creative (or any other brand of speakers for that matter)?
Thanks

If this is the device that you have........http://www.technicolor.com/en/solutions-services/connected-home/modems-gateways/ xdsl-modems-gateways/tg799vac-xtream ........then it is a gateway type of device that combines a modem and router in one package.
The Time Capsule must connect to a device like this using the "Off (Bridge Mode)" setting to avoid errors on the network. Make sure that the Ethernet cable from the Technicolor gateway connects to the WAN "O" port on the Time Capsule.
If the Off (Bridge Mode) setting does not work, I would suggest that you reset the Time Capsule back to factory default settings and then set it up again.
Are you still using the OS X (10.4.9) operating system that you indicate in your profile? If yes, you would need a much more up to date operating system to work with the Time Capsule.
If resetting the Time Capsule and setting it up again does not work, then I would recommend that you contact Apple Support for more assistance. Click on the flag of your country on this link:
Contact Apple for support and service - Apple Support

Similar Messages

Connect multiple devices to one Thunderbolt port with docking station

Hello everybody,
for a video editing setup I would like to use all devices connected until now directly to my iMac just with a Thunderbolt docking station on only one Thunderbolt port. What I do not understand is, whether bitrate will stay the same for each device or will be splitted? Has this to do with daisy chaining Thunderbolt devices?
So this will be the setup:
1 Thunderbolt cable from iMac to Thunderbolt docking station
devices connected to docking station:
one Blackmagic Intensity Shuttle Thunderbolt
one external USB 2.0 hard drive
one external USB 3.0 hard drive
external HDMI monitor
Ethernet connection
So the general question is, will all of these devices get only part of the bitrate that Thunderbolt provides or can each device, theoretically, get full Thunderbolt bitrate?
And are there different types of Thunderbolt cables (Thunderbolt 1 or 2) that I have to pay attention to?
Regards DonTimo

Also, if you use the Apple 27" Thunderbolt Display, it will have an additional Thunderbolt and Firewire ports on its back.

Can I connect multiple devices to one thunderbolt port?

I have the need to connect an external monitor and a firewire cable to my Macbook Air, but with only one Thunderbolt port I am trying to determine if this is possible. Is there such an adapter that would take my single Thunderbolt port and 'split' it into two?

Also, if you use the Apple 27" Thunderbolt Display, it will have an additional Thunderbolt and Firewire ports on its back.

Can I have multiple devices on one iCloud account

can I have multiple devices on one iCloud account? Like a iPad and Mac Book Pro
If so how can I do this?

Sure. That is what iCloud is meant for, so you can keep your devices synced.
When you set up iCloud on the devices, use the same Apple ID on all devices, then the iCloud account will be the same.
see this page: http://help.apple.com/icloud/#/mmfc0f1e2a

I have multiple devices and one itunes account can they have separate icoulds?

I have multiple devices on one itunes acccount, can they have separate icoulds?

Settings > iCloud > Sign in with the desired Apple ID.
Settings > iTunes & App Store > Sign in with the desired Apple ID.
The two above can be different Apple IDs, mine are.

HT204053 Link multiple devices to one account

How do I link multiple devices to one master account for purchases with multiple usernames

Hello,
This is a great tutorial using a couple of free DW
extensions.
Check out the "Finished Gallery" example.
You can easily change the settings so the images all appear
in the same
place.
http://www.projectseven.com/tutorials/images/showpic/index.htm
Take care,
Tim
"serestibi" <[email protected]> wrote in
message
news:fpiloc$ruf$[email protected]..
> Hi, beginner here, can you tell?
> I am trying to link multiple images (thumbnails) to one
big picture frame.
> So if you click the thumbnails, each will blow up in the
same frame.
> The easy solution would be to link them to a table, but
it doesn`t seem
> linkable.
> I tried different slide viewers but I can`t personalize
them enough.
> Can I do something within dreamweaver to get this
affect?
> Please sombody help me!
> Thanks , Tibor
>

Multiple devices on one hotel internet subscription

Hi
I have found myself with an issue. I have an airport express and multiple network devices I want to use in an hotel room. The hotel requires a fee per 24 hours with a login screen. I have tried and configured the express to use bridged mode and also to distribute a range of IP address’s. When
I use each device they all first go to the logon screen requiring a fee. Now I have had this up and running in another hotel where I was able to bypass the login screen once the first device was logged in.
I think that the issue may be that I used the laptop this morning to login and pay the fee, and maybe the hotel network is using the laptop mac address as the device the fee has been paid against. I have set the express with the IP the laptop received and disrupted IP’s to the other devices with no luck.
I may just have to wait 24 hours to pay the fee again using a device behind the express. Which should see the express mac address as the device requiring internet service.
Anyone have another idea’s
Thanks

All correct except for #5, which may or may not work. Hotels are rapidly starting to charge for each device that connects and the hotel router will know when you try to connect another device.
That's why I suggested the Share a public IP address setting. In this setting, (which worked for the other user) the hotel router only sees one device...the AirPort Express. It does not know how many devices are connected to the AirPort Express in this setting. In bridge mode, it does.
Remember there are never any guarantees with hotel connections. What works at one hotel will not work at another. You need to be able to make adjustments and configuration changes on the fly according to the circumstances at hand. In other words, it's really not possible to pre-configure the Airport Express for any hotel connection.
Message was edited by: Bob Timmons

Connecting multiple devices to Lan ports on airport

Hi, I have an Airport Base Station where I need multiple devices connected to through LAN cables. In short it is a) Apple TV and b) External TV providers box.
When I plug in the Apple TV to the first LAN port it works great, and I then connect the external TV providers box to the second lan port, and now it won't connect to the internet.
If I turn these around, then the apple TV won't connect, but the box will connect.
The station is set-up in bridge mode, and when I switch it to DHCP/NAT, then I get an error "doubble NAT".
What do I need to do to get both devices working at the same time when connected through the LAN ports?

If this is the device that you have........http://www.technicolor.com/en/solutions-services/connected-home/modems-gateways/ xdsl-modems-gateways/tg799vac-xtream ........then it is a gateway type of device that combines a modem and router in one package.
The Time Capsule must connect to a device like this using the "Off (Bridge Mode)" setting to avoid errors on the network. Make sure that the Ethernet cable from the Technicolor gateway connects to the WAN "O" port on the Time Capsule.
If the Off (Bridge Mode) setting does not work, I would suggest that you reset the Time Capsule back to factory default settings and then set it up again.
Are you still using the OS X (10.4.9) operating system that you indicate in your profile? If yes, you would need a much more up to date operating system to work with the Time Capsule.
If resetting the Time Capsule and setting it up again does not work, then I would recommend that you contact Apple Support for more assistance. Click on the flag of your country on this link:
Contact Apple for support and service - Apple Support

Divorcing multiple devices from one itunes account

We have one Apple ID / iTunes account with multiple devices attached. I would like to divorce all devices and have each member of the family with their own Apple ID/itunes, but don't want to lose the content (music etc) that has been accumulated over time. How do we do this?

Your iTunes collection is individual to computer, not in the cloud somewhere and synchronizing to your computer from there. In other words, if you delete a file on one computer it will still be on the others until you delete it from there. Likewise, if it is on one computer that is not a guarantee it will be on other computers. The closest to this is some of the automated downloading Apple does if you buy things from them. You will just need to make sure your desktop is really up to date before wiping your media from the other computers.

HT1351 Syncing multiple devices on one iMac

Need help on syncing multiple devices with different content on one iMac so each device remains unique. How's is that done? Do not want apps copied over, I want each device to have its own apps pictures music etc....

Plug your iPhone, iPod touch or iPad into iTunes via the USB dock cable.
Find it listed under Devices in the left sidebar and click on it.
Go through the tabs on the top of the iTunes window and select the music, movies, apps, podcasts, etc. you want to sync.
Your selection can include none, all/automatic, or just the exact content you wish.
Sync!
Repeat with all yourdevices.
Or you can do this:
Option+Click on the iTunes icon and choose Create Library and go from there.
Switching library is just an Option+Click away, this means you can choose 2 diff libraries.

Syncing multiple devices to one computer

We have one mac book, two iphones and an ipad and are having trouble syncing them all to the one computer. I have set up a different user account (with the itunes library shared across all users) for one iphone and ipad (who belong to the one person). However when we connect these devices it states that they have already been synced with an itunes account and will need to erase it to do so. They iphone was set up with an old computer and the new ipad through icloud. I have selected to manually manage the music (both with the old and new computer) but itunes keeps telling me it will have to erase the iphone/ipad to sync with this computer - all we really want to do is put music on the devices but definitely don't want to loose the contacts and all the other information.
Any help or advice would be greatly appreciated!
Thanks

Iphone will sync or manually manage with one and only one computer/library at a time. Syncing or manually managing to another will indeed erase the current content this is the design of the iphone.
If you have your contacts on the new computer ( you shold have moved them along with everything else to the new computer), then nothing will be lost.

HT1495 how can i sync aps on multiple devices on one computer

Trying to use multiple devices on same computer but don't want the devices to have all the same aps. how can i seperate that without having to check the aps i want each time a sync?

Assuming the photos are in an iPhoto Library on the Air and you want to import them into your iPhoto Library on your Powermac there is an application that can copy all photos in the Air library that are not in your Powermac library into your Powermac library. However, no keywords or other metadeata willl be brought over with them and they will come over in a new event each time you run it. Take a look at: Sync iPhoto libraries | SyncPhotos (formerly iPhotoSync) | Haystack Software.
There's another application, iPhoto Library Manager, that will let you copy events or albums from the Air library to the Powermac library. However, you will have to select the events/albums you want to copy. It's not automatic. This method will copy keywords and other metadata along with the photos.
OT

HT204053 can you have multiple devices on one apple id?

i ahve added a new iphone to may wireless account but both phones are now using the same apple id.

Not sure what your question is? You can have multiple devices signed on to the same Apple ID. Do you have any other questions concerning that?
Cheers,
GB

Can i connect 2 devices to one computer account?

I have a 2 year old ipod and a newly acquired shuffle. I cannot seem to be able to install the shuffle onto my computer with the existing itunes account. the "new installation" process doesn't work nor does simply plugging in the usb cable. any help out there? or even where can i get help with this? is there a phone # for a human at apple? thanks, and stay dry.
dell Windows XP

According to this you should be able to:
How to use multiple iPods with one computer
But I'm no Windows expert, you may want help in Installing the Shuffle. Do you want to try posting in one of the Forums on this Category page:
http://discussions.apple.com/category.jspa?categoryID=199
Regards,
Colin R.

Multiple devices sharing one acct. iMessage gets tangled

how can my multiple devices use the same iTunes on PC, same purchashing on iTunes and not get the imessages and other icloud functions tangled between devices

To keep your text messages separated, everyone should use a different Apple ID for iMessage on their devices. You can still share the same iTunes ID and have different IDs for other services such as iCloud, iMessage, FaceTime, etc.
To change IDs, go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign back in with a separate ID. To avoid getting eadh other's FaceTime calls, do the same thing in Settings>FaceTime.

Connecting multiple devices to one speakerset

Similar Messages

Maybe you are looking for