Connecting multiple hubs - yes or no?

I need one additional port on the Linksys hub at work to connect a new workstation. We have an 8-port hub. Can I connect a 4-port Linksys hub to the existing hub or do I have to purchase a new 16-port hub? Help!
Thanks!

Hi… You can cascade two switches just by running an Ethernet cable from one switch to another.

Similar Messages

Is it possible to connect multiple R/3 systems to one APO system?

Hi,
Is it possible to connect multiple R/3 systems to one APO system?
Kind regards,
Kris De Smedt.

Hi Kris,
Yes, you can connect multiple R/3 systems to one APO system. All you need to do is to maintain connection parameters of all the R/3 systems with APO. (i.e. RFC Destinations, logical systems, partner profiles etc.)
Regards,
Naveen.

Connecting multiple ColdFusion 10 instances to a single Apache 2.2 server

This is replicated from StackOverflow's "Server Fault" site. The CF community there is under represented, so I'm posting here too. Sorry for "cross post".
This is on Windows 7 Home Premium edition.
I have got two ColdFusion 10 (updater 2) instances: "cfusion" (the default one), and "scratch".
I have got a single instance of Apache 2.2 running.
Within Apache, I have set up two virtual hosts, each of which needs to be served by a different ColdFusion instance.
Each of the CF instances serves files fine via Tomcat's internal web server. Apache serves vanilla HTML files fine too. So both CF instances, and both virtual hosts separately work OK.
I can get wsconfig.exe to connect either one of the CF instances to the Apache server, and serve CF files via Apache & that instance.
However I cannot find a way of connecting the second CF instance to Apache as well, so that both CF instances are conected, each serving one of the virtual hosts. WSConfig doesn't seem to understand the notion of "multiple CF instances", and the changes it makes to the httpd.conf (via mod_jk.conf) does not seem to be implemented in such a way as to accommodate multiple CF instances talking to a single Apache instance, or multiple virtual hosts. I freely admit to not being confident enough with how mod_jk (or even really httpd.conf) works to be able to guess if I can change stuff to make it work.
If I try to add the second CF instance using WSConfig, I just get a message "the web server is already configured for ColdFusion". Be that as it may... not the instance of ColdFusion I want to connect it to! If I remove the existing connector to whichever instance is already connected, I can then connect the other one no problems. Not that this helps, but it demonstrates that the CF instance can connect to Apache.
This all used to be fairly straight fwd under older versions of CF and JRun :-(
The only docs I have found are on the "Connect multiple Apache virtual hosts on a web server to a single ColdFusion server" page (http://help.adobe.com/en_US/ColdFusion/10.0/Admin/WSc3ff6d0ea77859461172e0811cbf364104-7fd 5.html), but that specifically only deals with a single CF instance. There is no equivalent page for multiple CF instances.
I'm kinda hoping I can move some of the mod_jk config into my virtual host entries in httpd-vhosts.conf (this is how it used to work for JRun), but I've no idea what to put where.
I think I've covered all the necessary info here? If not, sing out and I'll add more. Thanks.
Anyone? Cheers.
Adam

The answer to your question is Yes, a single mediator can invoke two service calls at same time as well.
First, define your service references in the composite.xml
Once you have done that, you can add any number of routing rules for each operation defined in the mediator. In your case, you will need to add two static routing rules within the same operation in the Mediator file. You can also select whether the calls will be sequential or parallel by selecting correct value in the dropdown inside the routing rule. Each routing rule will invoke one service reference in your case.

How to connect multiple Xserve Raid for Best Performance

I like to get an idea how to connect multiple Xserve Raid to get the best performance for FCP to do multiple stream HD.

Again, for storage (and retrieval), FireWire 400 should be fast enough. If you are encoding video directly to the external drive, then FireWire 800 would probably be beneficial. But as long as the processing of the video is taking place on the fast internal SATA drive, and then you are storing files on the external drive, FireWire 400 should be fine.
Instead of speculating about whether it will work well or not, you need to set it up and try your typical work flow. That is the only way you will know for sure if performance is acceptable or not.
For Time Machine, you should use a single 1.5TB drive. It is likely that by the time your backup needs comes close to exceeding that space, you will be able to buy a 3TB (or larger) single drive for the same cost. Also, I would not trust a RAID where the interaction between the two drives is through two USB cables and a hub. If your primary storage drive fails, you need your backup to be something that is simple and reliable.
Oh, and there should be no problem with the adapter, if you already have it and it works.
Edit: If those two external drives came formatted for Windows, make sure you have use Disk Utility Partition tab to repartition and reformat the drive. When you select the drive in the Disk Utility sidebar, at the bottom of the screen +Partition Map Scheme+ should say *GUID Partition Table*. When you select the volume under the drive in the sidebar, Format should say *Mac OS Extended (Journaled)*.

Connecting BT Hub 3 to a Netgear universal WiFi Ra...

My netgear wifi extender seems connected to my BT Hub 3 but when my iPad tries to connect to the extender wifi it does not accept the wireless key from my BT Hub. Has anyone managed to get this to work ? Thanks.

Yes it will work. No crossover cable is needed as all switches are auto sensing anyway.
If you did not want to run a cable, then you could connect the hub to the switch using Powerline adapters.
See Network connections
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Tries to connect multiple times at the same time a...

Tries to connect multiple times at the same time after trying to reinstalling software.

Hello,
Assuming that you use a Web version (this information MUST be provided in any post), you have 2 ways to run reports:
1. the Run_Report_Object built-in
2. the Web.Show_Document() built-in
Francois

How can I connect multiple clients to a single client ?

I am currently developing an instant messaging program.I created a server and connected multiple clients to it by using thread logic.However I do not know how to connect multiple client to a single client.
What shall I do for that?Does anybody know a good tutorial or sample program?Or shall anybody explain me what I shall do for building the Instant Messaging part of my chat program?
Thank u in advance.

You may use UDP multicast socket. But since you are using the UDP protocol you might risk losing the data that you send since UDP does not guarantee the safe transfer of data.
Alternately, you might create a server that allows multiple client to connect to it whose connection Socket objects are then stored in a Vector <Socket> object. The server then sends back data to the connected client about the other clients connected to it. Now when the client wants to send data (like an IM) to another connected client, it has to send a request to the server specifying the client login name and the server in turn streams that particular client's Address and Port to the requesting client. The requesting client then initiates the connection with the other client and then starts a conversation. One more thing, when the client communicates it needs to send information to the server like the name by which it likes to be referenced. In this scenario the server acts like a central repository for clients to query the existence of other clients in the chat room. Each client here runs a thread that listens to incoming connections and when a connection is established, may be opens a IM window or something.
The third option is to make the server to relay the information from one client to another. Like say, I'm connected to whoopy server and i want to send "Hello" to jackson, then i send the message (ie, Hello) along with the name of the client to which i wish to send it to (ie, jackson). The server then performs a lookup in its Vector <Socket> object and then initiates a connection with jackson and sends the information. However, this method is pretty costly in that you will be wasting a lot of processing behind the server.
--Subhankar
P.s. If you stumble upon any other brilliant ideas let me know.

How do I connect multiple displays to a Lenovo 405

how do I connect multiple displays to a Lenovo 405 running windows 7? I tried a video card but the built in amd video port would not function with the video card plugged in.
Moderator Note; subject edit, post moved to here

hi harry13,
Welcome to the Lenovo Forums.
If you're referring to the Lenovo® H405, this unit has an integrated VGA and HDMI out according to this pdf data sheet.
If you'll be using a flat panel monitor (that usualy has a VGA connector and a single link DVI D digital interface), you will need to connect 1 monitor to the VGA out and use an HDMI to single link DVI-D converter on the other monitor. You might need to scan for hardware changes under the device manager to identify the monitor that's connected to the HDMI to DVI-D converter. Note that you need to change the video setup under BIOS to IGD or the onboard graphics.
If you'll be using your discrete video adapter for the multi-monitor setup, you must change the video setup to PEG under the BIOS and the video card must have a vga or hdmi/dvi out.
Also, see these guides as a reference:
How to set up dual monitors in Windows 7
Dual monitor setup: Two monitors are better than one
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Issue connecting multiple servers in parallel using wlst

Hi,
   I have requirement to write a jython script to connect multiple weblogic servers and generate some reports.
   I am importing wlstModule(import wlstModule as wl) in the scirpts.
   I would need multiple users to be able to run the script from a webpage in parallel.The website is based on java.
   1. My initial thoughts were to create a new thread for each user request. But since the global variable cmo is shared between the jython threads,i believe it wouldn't work.
   2. My second option is to create a new process for each user.This way each process would have its own independent global namespace.
      Even though this should work,it dosen't look the cleanest way to do.
   Does someone have any better idea?

You can use the Distribution Monitor for that purpose. Check note 855772 - Distribution Monitor
Markus

Possible to connect multiple R3/Systems to one XI?

Hi,
is it possible to connect mutiple R3-Systems to one XI?
How does it work?
Regards
Stefan

Stefan,
You can certainly connect multiple R/3 systems to one XI.
1. If your R/3 system release is 4.7 then use point 8 from the configuration guide. (RZ70 transaction collects the system data and creates a technical system in the SLD)
2. If your R/3 system release is < 4.7 (means 46c or 46B, 40B) then you should create a technical system in the SLD.
3. For any other SAP product with ABAP stack (including R/3 47 system), you should check the SAP_BASIS release if it is 6.20 you should apply XI Add-on to use XI Proxy adapter. For SAP_BASIS < 620 you cannot have XI Proxy adapter. For SAP_BASIS > 6.20 you do not need any add-ons (from this point onwards it is NetWeaver)
To find SAP_BASIS release -> SPAM Transaction -> Click on Package Level.
Then create a business systems for each one of them and import them into the Int. Directory when needed.
Regards
Shravan

How many pcs can connect to hub at same time

how many pcs can connect to hub at same time, I have looked everywhere and if you know where did u find the answer, many thanks

Most routers specs I've seen have a theoretical maximum of 256, but obviously due to practical performance issues would likely limited to less than 20.
As said, usually more than a home user would need.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***

Connecting multiple CRM systems to one backend R/3 and vice versa

Hello experts
Can you tell me whether it is advisable to connect 2 CRM systems to a single backend R/3 and vice versa? Is it recommended by SAP? I require some notes or docs on this. I got some notes on this forum but they are all Internal ones which I am unable to see.
Please help!
Warm Regards
Debolina

Hi,
Though SAP does not recommend connecting multiple systems to one ECC backend. But still it has designed a procedure to achieve this.
Here is the excerpts of the steps required.
1. Execute report MCRM_SETTINGS for each CRM system connected to the ERP
system.
2. Check the entries of the table CRMRFCPAR of the connected ERP system:
The field REM_LOGSYS should be filled for every entry marked with
u2018Created by the MCRM reportu2019.
3. Activate the corresponding consumers in the table CRMCONSUM
(transaction SM30).
4. Internal and external number ranges for Business Partners have to be aligned
manually.
Hope it helps you!!!!
Good Luck.
Pardeep

Possibility of connecting multiple BW systems to single ECC system

Hi all,
I have a requirement in my company to connect multiple BW systems to single ECC system. Would like to confirm whether this may not be supported by all BW extractors in particular the delta mechanism?
For logistics extractor in ECC side in RSA7 it stores BW System as target which shows they support multiple BW systems as target, but for FI extractors which keeps delta timestamps in BWOM2_TIMEST table, it doesn't store the target system. I'm afraid if we connect multiple BW systems to single ECC system, some of the delta records might go to one BW system and some others go to the other BW system when we execute delta load in both BW systems.
Thank you very much in advance.
regards,
arie

Hi,
You can very well connect multiple BW systems to single ECC system and you will not miss any delta as well. In the source system for each delta data source a delta queue is maintained for each target system.
for e.g. I have two BW systems ABW and BBW connected to AEC system then for 0FI_AP_4 data source we will have DQ1_ABW and DQ2_BBW as two different delta queues (I am not following any naming conventions, actual names will be as per the target system logical name).
The settings maintained in BWOM2_TIMEST table are across the system and they define some global settings e.g. till what time the FI data should be extracted in BW system, for e.g. the time maintained is 2.00 AM then though you do extraction from multiple systems same data will be extracted till next time interval occurs.
In summery you can very well connect multiple BW systems to a single ECC system.
Regards,
Durgesh.

Connecting multiple companies at a time????

hi all,
         Can we connect to multiple companies at a time through DI-API.this is the coding where i connect to single company through combobox..
       oCompany.CompanyDB = Combo1.Text
        oCompany.UserName = Text1.Text
        oCompany.Password = Text2.Text
        lRetCode = oCompany.Connect
but i want to connect to 3 companies at a time using list box items(3 items)...i have that doubt whether cn we connect at a time???
regards,
shangai.

hi,
this is the coding iam trying to connect multiple companies....the first company is connected successfully but from 2nd company it's showing as -116 error..this is the coding iam using...
For N = 0 To lstDealerDb.Items.Count - 1
                    j = lstDealerDb.Items(k)
                    k = k + 1
                    oCompany.CompanyDB = j
                    oCompany.UserName = Text1.Text
                    oCompany.Password = Text2.Text
                    lRetCode = oCompany.Connect
                    If lRetCode <> 0 Then
                        oCompany.GetLastError(lErrCode, sErrMsg)
                        MsgBox(sErrMsg)
                    Else
                        MsgBox("Connected to " & oCompany.CompanyName)
                        Me.Text = Me.Text & ": Connected"
                    End If
                Next
regards,
shangai.

Can I connect multiple bluetooth headsets to my iPod at the same time?

Can I connect multiple bluetooth headsets to my iPod at the same time?

After 1 or 2 reboot system I managed was enter my MacBook Pro my AppleID and it is connected I managed so to have the flow of "Stream Photo" from my iPhone 4 S to my iPad 2 on the MacBook. But incomprehensible how the function "find my Mac" not recognize the MacBook Pro in "iCloud.com" or App in the iPhone 4 / iPad 2. Thus I do little "see the iMac, iPhone 4 and my iPad 2" and not the Macbook Pro !?!
I am sorry about my English quality but I'm not English speaking this text is translated by Microsoft Translator.

Connecting multiple hubs - yes or no?

Similar Messages

Maybe you are looking for