Connecting my computer to my hotspot on my droid...help

It is asking for a password???

Hello and happy Sunday TCPeters,
I wanted to touch base with you to ensure that you are able to enjoy your mobile hotspot. This is easily one of my favorite features on my smartphone and I want you to have the same convenience that many others use daily. May I ask what model device do you have? Also, have you had the chance to get or change the password for this service? As you provide us with info on the status of this issue then we can customize a solution for you.
Thank you...
ArnettH_VZW
Follow us on Twitter @VZWSupport

Similar Messages

My ipod will not turn on past apple logo, unable to reset it and will not connect to computer, cannot reset software or change anything, help!

orignal screen when i tried to turn it on. after hours of trying it finally connected to itunes and just as it started to sync it disconnected and the screen went like this. help me please.
its a 2nd gen ipod and out of warrenty.

Try here:
iOS: Not responding or does not turn on
If the screen remains on and you can't turn the iPod/screen off, let the battery fully drain. After charging for at least an hour try the article again.
From the sympton an appointment at the Genious Bar of an Apple store might be in order.

How can I see the list of all the devices connected to my iPhone's hotspot?

I currently see 2 connections connected to my hotspot. Is there anyway to check which two devices are connected to my phone's hotspot?

If you should only have one buy are seeing two remember that your computer will count as one when plugged into USB. I figured this out eventually .

TS1538 ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

ipad does not come on once its unpluged from power source,it enters recovery mode when both power and home botton are pressed with usb on powersource but does not come up at all when connected to computer or out of power source

What model iPad do you have? If it's an iPad 1, the battery may have expired and needs replacement.
 Cheers, Tom

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

HT5437 How can I use apple TV to connect my computer to the tv screen as an external monitor?

How can I use apple TV to connect my computer to the tv screen as an external monitor?

Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario

Connecting a Computer to an HDTV

Hey everyone,
One of the most frequently asked home theater questions we see here on the forums is “How do I connect my computer to my HDTV?” Well, depending upon the model(s) you own you may have a number of options.
For starters, the most common option to connect a computer to an HDTV is to use a VGA cable. Often referred to as RGB, D-sub 15 or even generic “PC” inputs on many TVs, these connections are present on a healthy majority of desktop and laptop computers. Some laptops will even feature miniature versions of these ports that can be easily converted to a full-size VGA connection through the use of a special adapter.
The second option, connecting the two using component cables, is primarily used by consumers that own an older HDTV. Most often found in the home theater section of a store, these cables are not only relatively inexpensive, but can also generally be identified by their red, blue, and green color coding as explained by Rodney-GSHQ in this other thread. There is, however, one slight problem: most video cards do not feature component outputs.
The next available option is to use a Digital Video Interface (DVI) cable. These connections are quite common on newer desktop computers, and are often considered to be the digital successor to VGA. That’s right – everything up to this point has been analog only.
Last, but not least, you may have the option of connecting your computer to your HDTV using an HDMI cable. HDMI outputs are typically only found on newer (and higher-end) computers, but are considered by many to be capable of providing the highest-quality digital signals available.
Regardless of which method you choose, remember that you will need a separate cable to run audio from your computer to your TV! Additionally, it’s strongly recommended that you double-check your TV and computer’s owner’s manuals for step-by-step instructions as there are a number of precautions that you should take before attempting to connect the two.
Still not sure how to proceed? Give us a call at 1-800-GEEK-SQUAD (1-800-433-5778) and we’d be glad to help you out!
Aaron|Social Media Specialist | Best Buy® Corporate
Private Message

I know for a FACT that HDMI and DVI are intercompatible. I was talking about the sets themselves. NOT the specs. Many HDTVs have EDID tables that are not compliant with PC signal specs or in some cases, they give off EDID information that isn't understood by various electronic devices that rely on such information. This is a well-known fact and has been a particular problem with older sets. Yes, you can tweak the signal from your PC using PowerStrip, the Nvidia/ATI driver hacks, or whatever applies to your particular setup, but those don't always work. As far as I'm concerned, it doesn't work until it works out of the box and there are only a few sets that will work with PC signals over anything other than VGA by design. I know this from my own testing done at Best Buy on nearly two dozen of the 1080P LCDs with my own HDMI/VGA equipped notebooks using the latest (non-Beta) drivers from Nvidia, ATI/AMD, and Intel. I tested both HDMI and VGA from the notebooks for nearly three hours. VGA was the clear winner for out of the box connectivity on most of the sets and HDMI lost big time because the signal was either not displayed at all or displayed improperly with no clear way to resolve the issue. The Sony Bravia LCDs were the only ones that passed both the HDMI and VGA connectivity tests that I did. You simply got lucky with the two LCDs you have used because they were likely intended for multi-media use. The Westinghouse certainly was at any rate since they have always catered to that market.

I need to connect a computer monitor to my MacBook Pro but have found that when using the mini display port to VGA adaptor the screen display on my macbook is very small font. Please what do I do to correct this?

I need to connect a computer monitor to my mac book pro, using a mini display port to VGA adaptor. But have experienced a drastic reduction in font size on my
Mac screen even before I have managed to check the result on the monitor screen. Please how do I compensate for this and restore my mac screen appearance?
Many Thanks Alangium in uk

Hi alangium,
Welcome to the Support Communities!
Resetting your computer's PRAM should restore your Macbook Pro's screen appearance.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
This article may provide some information about your Mini DisplayPort to AVI adapter. Have you tried to connect a different VGA monitor to your Macbook to see if you get the same results?
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/HT3382
18. What is the maximum resolution available for use with the Apple Mini DisplayPort to VGA adapter?
The resolution available with the Apple Mini DisplayPort to VGA Adapter is 1920 x 1200. VGA displays that use higher refresh rates (such as 85 Hz) at resolutions of 1600 x 1200 or greater may not generate video properly until you lower the refresh rate.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573#5
How can I detect displays?
If the detect displays option is not available, hold down the Option key while you are in the Display pane.
How do I select additional resolutions on my display?
You can use the Display pane of System Preferences to specify how your display works. Not all options appear for all display models. By default the best resolution for your display will already be selected in System Preferences.
To select a different resolution, use the Scaled option. Some additional resolutions may be available when you hold the Option button.
I hope this information helps ....
- Judy

Cannot get Win8 Pro computer run the Connect a Computer to the Server Wizard (computerconnector) of Essentials 2012

I've spent 1/2 the day trying to troubleshoot this problem and finally give up.
My client has a Windows Server 2012 Essentials server (with all updates installed - no errors in error logs nor SFC /SCANNOW). Purchased a new Windows 8 Pro computer, which we installed all the updates from Windows Updates and are now trying to join
the domain using the "Microsoft way" (i.e.: http://[servername]/connect).
The site comes up and it prompts us to download the software and run... so far so good, but when we get to the screen where it asks, "Type your new network user name and password" - the next screen after that we get the error, "Cannot connect
this computer to the network...".
I've been looking at cases all day long through Microsoft and Google - all pointing to problems with the SSL on the server - that's not the problem here (as other workstations have, in the past, successfully connected and we verified today that the local
server certificate is what is the default, as it should be).
I've tried just about everything I can think of and cannot get this silly wizard to work (why Microsoft, WHY!??!?!). Yet, I can join this domain just fine doing it through normal means. I've even tried joining the domain this way, and tried installing
the software afterwards (as the Essentials Console won't reflect the new workstation, thus it won't add it to group policies etc... though yes, I could manually do that and have - but we'd still like to get it to show up in the console). I even
tried the trick noted in a KB talking about running the connect software without joining the domain (registry key that gets added) - that didn't work either.
I'm out of ideas - and at this point had to get the client online and working today - so we joined it manually, configured it and left it. But I would like to get this fixed the "proper" way. Help?
I do have the clientdeploy.log file - which only points out an internal error, but I'm unsure how to enable the improved logging it suggests (I'll gladly post the logs if someone tells me how - I'll skip posting the log file here for now):
[1544] 140204.203620.0794: ClientSetup: MachineIdentityManager.GetMachineStatus had errors: ErrorCatalog:NetworkError ErrorCode:-1
BaseException: Microsoft.WindowsServerSolutions.Devices.Identity.MachineIdentityException: MachineIdentityManager.GetMachineStatus ---> System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more
information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on
tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Suggestions? Thoughts? I hope Essentials 2012 R2 improves this - as I've had this error for other various reasons with other clients (and spent 1/2 days troubleshooting to clear those up). Essentials Connect, IMHO, needs a re-write - as
it's been nothing but a hassle... miss the SBS connect.

Hi slemay,
Before going further, please uninstall the Connector software from Control panel. Then connect again, will
the same issue persists? Would you please use another client to connect with the Server 2012 Essentials by using this way? Then monitor the result. Please make sure the computer has a physical connection to the local network.
Please refer to the TechNet article (Here)
and troubleshoot, then check if can help you to solve it.
In addition, please refer to the following articles and enable
WCF tracing to go further. Please check if you can find some clues.
How to enable WCF tracing
http://blogs.msdn.com/b/madhuponduru/archive/2006/05/18/601458.aspx
[wcf: solution] The server was unable to process the request due to an internal error.
http://blog.bitlinkit.com/wcf-solution-the-server-was-unable-to-process-the-request-due-to-an-internal-error/
Hope this helps.
Best regards,
Justin Gu

My ipod touch has stopped playing through my Sony docking station, It only plays through i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice.

Can only connect 1 computer at a time after changing from DSL to Cable.

I have 2 laptops using Airport cards, and one Tower connected via ethernet to Airport basestation. With DSL no problem (DSL required PPPoE). With cable I can use internet assistant and restart each device and finally connect, but only one at a time. I'll set up one, then have to reboot everything to set up the next computer and lose the connection with the first. Cable needs to use DHCP it seems.
To get it to work with the new modem I had to change the base stations configuration from distributing IP addresses to not distributing IP addresses. Methinks this has something to do with my not being able to get more than one computer working at a time.
Any help would be appreciated. Have to iBooks, and a G4 tower. 2 running OSX10.4.10, and one wtih 10.5.2.

Figured it out after about an hour talking first with Comcast, then Apple support. AEBS was not acting as router at all, and had been put in bridge mode.
Easy solution once this was realized was to do hard reset (I thought I was doing this by unplugging the AEBS, but had to actually find and press the hard reset button) which reset all the settings at which point setup was pretty easy. Made sure it was not in bridge mode, did an automatic setup using the Airport utility, and voila. Everything including my new iPod could connect.
Now if I could only have the 6 hours back that I spent going around in circles in bridge mode.

Iphone 4s wont connect to computer

This actually has gone on for a while now but now its almost a necessity because it seems to be the only way ...
my iPhone 4s will not connect to my computer since the 7.1.1 update, and to date at 8.0.?!?!?!?
i updated to 8.0 first day,
i missed 8.0.1
i downloaded 8.0.2 and attempted to install
the first time i got stuck because i didn't have enough space. i hard reset and deleted a few apps.
i installed 8.0.2 to find my self with a recovery mode bricked iPhone 4s
i get an iTunes logo and a cord.
in my mind i thought " okay i just need to fix what ever is keeping it from connect to computer"
but i noticed the iTunes logo was Red and i freaked out.
if all is well then the red logo would mean i need to reset my phone, connect to iTunes etc. etc.
i'm fine with wiping my phone, but i cannot connect to my computer, or iTunes.
BASICS
this problem runs with multiple cables
this problem runs on my computer ( i have not thoroughly tested such act on other computers, but I will tomorrow no doubt)
this problem cannot be fixed by changing my cable ( as the cable works with many other phones )
this problem is not affected by my operating system ( although i have not tested on a mac yet )
upon connecting to my laptop my phone will charge, windows will not detect my device as result calling upon error code 10 or 43
windows will not see my iPhone in device manager unless its called "unknown device"
when i plug my phone into the computer i do not get any sign of installing or searching for drivers
i get error code 10 when i attempt to manually install apple drivers
i have reinstalled iTunes 32 times without any problems
i have uninstalled all parts of iTunes and reinstalled from scratch 23 times
i know this problem revolves around the computer itself or the phone itself
i have not tested other apple products on the computer, but USB drives work flawlessly ( but take time to begin searching/installing drivers leading me to believe the problem revolves on the phones hardware )
this problem is not effected by iTunes version as i have tested the 3 latest versions
my warranty is void for being old lol
and i really think that your great mind(s) can help me resolve this problem
THANKS IN ADVANCED
Message was edited by: Fru5strum

Well, it appears that you have the latest version of iTunes, as you report removing and reinstalling. Just make sure you are using the latest one.
The error codes you are reporting are Windows errors, not iPhone or iTunes errors, which makes me what to believe that you are having a computer issue. You can take a look at this support document for a little help with the iPhone driver, see step 5. http://www.apple.com/emea/support/itunes/contact.html
You again report an error when trying to manually install a driver, again this is a Windows error. You would need to search Microsoft for help with those.

So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
pls pls pls pls help .
i have tried alot of solutions, but non of them have worked.

Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it.

My iphone 4s isnt coming up in my computer devises or in my itunes, yet is charging when connected to computer??

my iphone 4s isnt coming up in my computer devises or in my itunes, yet is charging when connected to computer??

try restarting AMDS http://support.apple.com/kb/TS1567

I downloaded the new iOS software on my iPod touch 4th gen. Now it's saying connect to computer with iTunes, I only have a iPad I don't have a laptop is there any way to bypass this

I Downloaded the new iOS software on my iPod touch now when I turn it on it has a USB cord and says connect to computer and iTunes, well the only other

No. You have to connect the iPod to a computer and restore via iTunes.
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Find a friend or go to an Apple store.

Connecting my computer to my hotspot on my droid...help

Similar Messages

Maybe you are looking for