Connecting my guitar to my IMAC?

I'm trying to play my electric guitar through my IMAC. I have external speakers connected to my Headphones socket in the back of my MAC, how do i go about playing my guitar through those speakers?
I have an adapter that will allow me to connect my guitar cable into one of the sockets in the back of my MAC but i'm not sure how to set it all up and what socket to plug what into???
thanks in advance
Matt

mattpearce79 wrote:
I have an adapter that will allow me to connect my guitar cable into one of the sockets in the back of my MAC but i'm not sure {...} what socket to plug what into???
there are only two, one is the headphone OUT, there other is the line-IN
how to set it all up
http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
(Let the page FULLY load. The link to your answer is at the top of your screen)
Note:
http://www.bulletsandbones.com/GB/GBFAQ.html#pluginguitar
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • What cable connects a guitar to my iMac Yosemite?

    I just want to learn to play guitar.  How can I connect a guitar to my iMac.  Help doesn't specify  a cable and Im not sure what brand will be compatible.

    What kind of guitar do you have? Does it have a pre-amp?
    Your iMac does not have an audio-in port. That is why Csound1 recommended audio interfaces, that will turn a USB port into a high-quality audio input port, suitable for a guitar.
    If you just want to try out an electric guitar, you could use an input splitter and connect it to the headphone port, if your guitar has a pre-amp,
    (for example this 2x 3-Pin 3.5mm Headset Splitter Adapter - M/F
    http://www.amazon.com/dp/B004SP0WAQ).
    Or use the iMic adapter  ( Recording with iMic in GarageBand). But both will not make you happy for a long time. The audio quality is not that good.

  • Just learning the guitar and want to know what cable I need to connect my guitar to my imac

    I know this may seem a basic question but there are a lot of different ways to look at doing this.I am only just starting to learn so don't need any thing fancy.

    you an try this cable, however most people find that the level is unacceptable without a preamp of some kind. in general some type of audio interface is required, something like any of these:
    http://www.bulletsandbones.com/GB/Interfaces.html

  • What do I need to connect my electric guitar to my iMac?

    I've searched and searched, and I can't find a 'clear cut' answer.
    I have a new 3.2Ghz iMac and use Garageband 08 and plan on purchasing iLife 09.
    I just bought a beginner electric guitar and amp (the amp only has line in and headphone jack).
    How do I connect my guitar to the iMac? I have heard that using the mini plug into the 'line in' on the back of the iMac isn't ideal. So what do I need to get? My local Sam Ash musicstore doesn't have helpful people, so I need you all to tell me what to buy?
    Oh yeah.. I don't have much money, so I just need to be able to play my guitar using Garageband and all its effects.
    Thanks!

    I read that it does not boost the sound properly.
    The job of that line-in port is not to boost the level, but to convert an analog signal to a digital one, and it does that in a decent manner.
    And I've also read that the audio-in on the iMac can cause delays in the sound you hear, along with other strange behavior.
    GB always has problems with latency (that's the term for it), and that might indeed be worse when you use the line-in since the computer has to do the conversion and run GB. But the bulk of the CPU load is in GB, especially when you put a lot of effects on the guitar, so don't hope for too much difference when you use an expensive interface.
    I can try the headphone out to the audio-in on the back of the iMac, but I guess I'm worried, as I have also read (on here), that you could blow your port if you aren't careful.
    You can blow your computer if you use a speaker out, headphones should be fine. Crank them up slowly and watch the signal.

  • Connecting a Nylon String guitar to my iMac to record

    How do I connect my electro acoustic Takamine, nylon string guitar, to the iMac to record with Garage Band?
    iMac G5   Mac OS X (10.4.4)  

    If its's an Electric Acoustic as you said (it takes a battery), then it SHOULD work plugged directly in. If it does not take a battery than, yes, you need an audio interface:
    http://www.thehangtime.com/gb/gbfaq2.html#interfaces
    If your budget supports it, a decent interface with a decent mic, as CD pointed out, will likely sound much better. --Hang

  • Connecting Electric Guitar to Garageband on G5 iMac

    I've seen other discussions about this, but cannot figure out this seemingly simple process.
    -I connected the guitar via 1/4 to 1/8 cables into the "line in" port on the back of the iMac.
    -I chose "real instrument" when adding a new track in garageband
    -I made sure that the sound input preferences under system preferences correctly states "line in" (and not internal audio/speakers).
    -I have the drop down menu set to "Monitor On" and the Sound menu to "Stereo"
    (even when I mess with these settings nothing gets recorded).
    When I hit record nothing comes through the computer - nothing gets recorded.
    Do I need the Griffin iMac or similar device?
    Any suggestions?

    it depends which iMac you're using:
    http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    also, if it's a guitar you're using, note:
    http://www.bulletsandbones.com/GB/GBFAQ.html#pluginguitar
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Connect classical guitar to iMac.

    Hi there, thanks in advance for any help. I'm wondering how best to connect my classical guitar to my iMac for recording in Garage Band. My guitar has a built-in dual pick-up and mike (standard 1/4" female jack in the end of my guitar.) I guess I need a 1/4" male connector and cable to plug into the guitar but then how do I best connect the other end of the cable to my iMac?
    I don't have any kind of pre-amp. Do I need one? Where do I plug in the guitar?
    Thank you for reading my question!
    Jean

    For 'Best' results using the pickup you should get an audio interface. I use either this http://www.presonus.com/products/Detail.aspx?ProductId=58 or this http://apogeedigital.com/products/jam.php
    There is a multitude of other brands to choose from.
    Cheers

  • What is the best way to connect my guitar to the usb port on my IMac

    This is for use with Logic Pro X
    what is the best way to connect my guitar to the usb port on my
    I-Mac

    As has been said really, the less you pay the less quality, and flexibility you'll have on your sound.
    For example, you could run on a 'Rocksmith Real Tone Cable' if you just wanted a cheap way of getting your guitar into the computer for some fun.  Probably cost you $30 (I live in UK so can't be sure).  If you're starting out then this could be considered the best option for dipping your toe in the water without spending too much.
    You won't get a really nasty sound out of that if you can process it yourself in Logic afterwards to clean up, but it won't be great either.  I imagine it could get quite noisy so you'd need to get heavily gating your guitar sound, if you're playing something clean that's not ideal.
    Longterm, you're far better getting a decent audio interface, as you need something to play sound back through, if you have different input sources you usually have to create an aggregrate device on osx to use multple sources at once esp if you're using the built in audio chip on your mac to listen. 
    All this can add latency and possibly sync issues (i.e. drum tracks not in time with audio etc.), although generally it's not too bad, but it's something worth knowing if you want to do things on the cheap without buying a dedicated interface.
    What kind of money did you want to spend? Are you thinking super duper cheap, and then see how it goes and maybe spend more in future if you enjoy it?  Personally i would say £100-150 would get your something good to start with, like that Presonus audiobox, there's a lot of options like that available.
    My local music shop always push the alesis io2 on new users, gotta say i'm not that overly impressed with it.  Line 6 stuff will be good however, but limiting.  Although i beleive you get their software for free with it?

  • How to connect my guitar into my new 13'' macbook pro using headphone's port?

    how to connect my guitar into my new 13'' macbook pro using headphone's port?

    you need a standard guitar cable and a 1/4 inch to 1/8 inch adapter such as this http://www.amazon.com/Recoton-CW1521-4-Inch-8-Inch-Adapter/dp/B00006HOIW

  • How to connect my iPhone to my iMac trough bluetooth?

    How to connect my iPhone to my iMac trough bluetooth?

    If you have a wifi router you can set up/turn on the wifi... set the user name and password wifi in your router... open wifi in general settings on the iPhone... log into your router, user name and password. (If your don't know how to turn on the router wifi. Google the router make and model and you will find instructions on how to do this.)
    If you don't have a wifi router and your Mac has wifi capabilities you can hookup to the internet over wifi from your Mac to your iPhone.
    System Preferences on the Mac... Network... Wifi... Advanced tab... Hit the '+' to add a user name and password...
    Make sure you use WPA2 Personal for Security... Hit ok... Turn on the wifi... Same as above with the iPhone, log into your wifi settings on the iPhone.
    *Important point... Use WPA2 for the encryption/Security setting. If you use anything else for this setting, your wifi can be hacked.

  • How do connect my Macbook to my Imac?

    How do I connect my Macbook to my imac to transfer photos?

    Firewire ports if both computers have Firewire ports.
    Ethernet cable.
    Via local home network - wired or wireless.
    External USB drive - copy to drive; restore copies on other computer.

  • How to connect my ipad2 to my imac and then transfer my ipad pictures to my iMac?

    howdo i connect my ipad2 to my imac and then how do i transfer my ipad pictures to my iMac?
    thanks for yur help!

    How to Transfer Photos from an iPad to a Computer
    http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
    Importing Personal Photos and videos from your iOS device to your computer.
    http://support.apple.com/kb/HT4083
    There's also some apps that will transfer via wifi. Using these apps may be the easiest way of transferring your Photos and Videos to your computer and other iOS devices.
    Simple Photo & Video Transfer
    https://itunes.apple.com/us/app/simple-photo-video-transfer/id420821506?mt=8
    Simple Transfer App
    https://itunes.apple.com/us/app/simple-transfer/id411292121?mt=8
    Easy Media Transfer : Useful App for Wireless Transfer
    http://apps400.com/iphone-apps/easy-media-transfer-useful-app-for-wireless-trans fer.html
    Photo Transfer
    http://www.phototransferapp.com/
    Copy Photos (& Videos) Between iOS Devices
    http://tinyurl.com/cnz95bc
     Cheers, Tom

  • I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11.  I need to update the Airport software in order to use security option WPA2 Personal.  I currently have Airport software v. 5.6.1.

    I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11.  I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme.  I currently have Airport Express software version 5.6.1.  How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way).  Is a later version of A E software available for download anywhere?   Any suggestions would be greatly appreciated.
    Thanks.

    Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
    AirPort Utility 5.4.2
    Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

  • When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected."

    When I connect my iPad to my iMac I get a repetitive flashing error message "iTunes could not connect to this iPhone. This device is no longer connected." iPhoto eventually launches but iTunes will not launch iTunes.  iPad will not charge.  Restarted iMac and rebooted iPad and no difference.

    Hi GJ374,
    Thanks for using Apple Support Communities.  This article has steps you can take for issues with your iPad not being correctly recognized in iTunes:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    - Ari

  • My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

    My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

    a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
    The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

Maybe you are looking for

  • Central instance error at "start instance" phase abap unknown...

    hi there, im installing central instance in mscs envi and im getting the error at "start instance" saying abap unknown. below is the sapinst log can help pls sapinst log INFO 2008-01-25 15:39:30 Copied file 'C:/Program Files/sapinst_instdir/NW04S/SYS

  • How many levels of hierarchy is supported in AII?

    hi,   i heard that the mobile UI supports only two levels of hierarchy... otherwise is it possible to have Container-Pallet-Case-Item such hierarchy? thanks, vinoth

  • How to send message to a queue using JMS adapter

    Hi, I need to send messages to the default queue(demoQueue) available in the server using a JMS adapter in a BPEL process. I tried doing the same by using an invoke activity that invokes the JMS adapter service to send the message to the queue. I dep

  • Laser Jet 4000 TN

    Hello I have searched this forum for a few hours to find a solution. A lot of answers refer to HP Jet. I have no idea what that is. I connect using airport extreme and an ethernet cable. I did reset everything on my printer still no success. Anybody

  • Information on impact on interfaces due to upgrade from 4.7 to ECC 6.0

    Hi friends, We are upgrading from 4.7 to ECC 6.0. We  have some interfaces with the SAP system in our current version.I need information on which of these interfaces will be affected due to Upgrade of the system to ECC 6.0 Mentioned below is the list