Connecting my hp 5520e to a network on a HG533

My new printer has connected to the network but i can not discover the printer on my Mac and Ipad can anyone assist me with this please

To be clear, if the router does not support Bonjour, you will not detect any apple devices on your network with it. You need to purchase a router which supports bonjour for use with apple products or as mentioned use wireless direct instead.
I was an HP employee
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Similar Messages

How do I add a printer connected to another iMac on the network to my printer list?

How do I add an Epson printer connected to an iMac on the network to the printer list on my MacBook Pro? I cannot get it to show up in the list for printers to add.

That only works if the printer is itself a network printer. You can't do it if it is directly connected to another computer on the network unless it is configured to be a Shared Printer on the other computer.

We have a PC with iTunes that needs the hard drive reformatted. Right now, it can't connect to other computers on the network. Can I save my music to a thumb drive, then re-load when the computer is reformatted?

We have a Windows XP desktop with iTunes for windows. The hard drive needs to be reformatted. Right now, the computer will not connect to other computers on the network. Can I save my iTunes songs to a thumbdrive, then re-load after reformatting? How do I do it?

Copy the entire iTunes folder out to the drive. If it is too big to go as one copy stuff over to another computer in batches. It is important to have not only the media but the library file in order to properly restore your library.
See also this User Tip. Assuming the machine won't connect to the internet you could download the SyncToy installer on another machine and then transfer it with the thumb drive. If it will connect to the net don't forget to deauthorize the machine before reformatting the hard drive.
tt2

I have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me

i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???

If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.

How to connect my mac book pro to network printer Canon IR 2010f?

I'm desperate to know how to connect my Mac book Pro to network printer Canon IR 2010f. This printer has an independent system, therefore, no need a PC to be on, in order to print. But this printer is a network printer. Help me please.

The Canon UFR2 v2.20 driver for Mac OS X does not list the iR2010F as a supported model. The same is so for the Canon PS driver so I therefore believe this model is PCL5e only.
What you should do is open Safari and type the IP address of the iR2010F. This will connect to the internal web page of the copier and from the provided pages you should be able to see what printer languages are supported.
If it only lists PCL then you will be able to print to this copier using the Generic PCL driver included with 10.6.
So if you open Print & Fax, click + to add and then select IP > LPD for the protocol you can then enter the IP address of the iR2010F and leave the queue name blank. For the name you can change that to iR1020F and for the Print Using, select Generic PCL Laser Printer.
One note with regards to this driver. It is defaulted to 300dpi so you will need to open the print dialog when you do print and change the resolution to 600dpi to get better print quality.

How to connect my iMac G4 to my network, it wont let me something about the password but I connect to a open network???Ask your question.

Hello I have been trying to connect my iMac G4 to my network but I can't. I have a secure network with a password and is not let me in but I can connect to an open network with no password??? anybody can help???

AirPort card in iMac G4 does not support strong WiFi encryption.
I think WPA is the maximum for that WiFi card.
If you have WPA2 in your WiFi network, you need to downgrade (not recommended)or wired connect the iMac G4.

How to connect a time capsule to another network

I have recently moved to an area that has no landline system, all ISP's are provided through a wireless router. How should I connect the timecapsule into such a network?
Regards,
Martin

Unfortunately, the Time Capsule was not designed for this type of operation.
Ask the network administrator if they can provide you with, or recommend a wireless to Ethernet bridge, so that the Time Capsule can receive the Ethernet signal that it wants.
It might be possible to configure the Time Capsule to "join" the wireless network in Bridge Mode.......but, even if that might be possible, the big downside here is that you would be setting up what is known as a "double hop" wireless situation with the Time Capsule.
If you do not understand that term.....please post back for more information.

RemoteApps Error "Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator."

Hello All,
Good day. May I ask if anyone experienced this error when trying to access remoteapps in Azure? We are using IaaS and set-up RDS using Windows 2012 R2 but we are getting an error below.
"Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator.
Various roles and services (Broker, Session Host, RD Gateway and Web Access are installed on each VMs).
Please advise.
Thanks,
Glenn

Hi Glen;
Looks like the set up was not done correctly. Please follow the guidelines given on this
blog by Keith Mayer.
Regards;
Prasant

Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

System Preferences > Network > WiFi
To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
http://support.apple.com/kb/PH13797

I have a MacBook Pro. My mac can detect wifi. But will not connect. I did get connected vis TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest.

I have a MacBook Pro. My mac can detect wifi. But will not connect anywhere. I did get connected via TCP/IP settings but I can't connect to any wifi anywhere. Network diagnostic has a green light for wi-fi and wi-fi settings. Red light for the rest. (Network settings, ISP, Internet and server.)

Hello NotAppleSavy,
Thanks for the question. After reviewing your post, it sounds like the computer wont connect to networks. I see you have used network diagnostic. I would recommend that you read this article, there are a lot of other things you can do in this article that may be able to help you resolve or isolate the issue.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Can I connect two apple tv on same network and same apple ID at a time ?

Can I connect two apple tv on same network and same apple ID at a time ?

Welcome to the  Discussion Forums.
Yes you can do all that without needing to keep plugging things in and out. You will still need to manually turn on the receiver and turn down the volume from the tv though.

Can't connect to computers on the same network and same office

Hi everyone, I have this problem from some time now, I have on the same network some computers with ethernet, and some with Wi-Fi.
All are connected to the C-Net Wireless-G Router.
My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area, but I have an iMac 2.0 next to my iBook and I can't see it.
How is that possible? Am I making something wrong with the subnet mask or IP address?
All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
If anyone could give me a hand here, I will apprettiate the advice.
Thaks to everyone, Pablo from Argentina.

rccharles wrote:
All are connected to the C-Net Wireless-G Router.
My iBook is on the Wi-Fi zone (All have 10.4.11) and I can see the computers on the Ethernet area,
but I have an iMac 2.0 next to my iBook and I can't see it.
How is the iMac 2.0 connected? cable or wireless?
iMac is on Wi-Fi.
How is that possible? Am I making something wrong with the subnet mask or IP address?
You are on a different subnet. In x.x.x.0 the x's are different.
All the computers are in the same subnet, cable ones and wi fi ones.
All are configured to use 192.168.1.254 as the router and on the subnet 255.255.255.0. Manually.
The IP variates from device to device on the 192.168.1.X numbers, starting with 100 on the iMac, and ending with 113 on an old 8600.
Look at what ip addresses you have on each machine.
I have different IPs on each machine, do you need the numbers?
Wy can't I see the iMac?, si so close that I can reach her with my hands, but can't connect to transfer files over the network.
Macintosh-HD -> Applications -> Utilities -> Network Utility.app
Use the ping command to see what is going on. Ping 192.168.1.254, source & destination machine. 127.0.0.1 is an alias of the machine you are on.
!http://farm3.static.flickr.com/2575/4090068351_6fb8dc3d55.jpg"!
check out port scan. This will tell you if sharing is on.
!http://farm3.static.flickr.com/2506/4090068193_7566e620cf.jpg!
I will try this
Message was edited by: rccharles

How can I get a PC connect to my home Airport Extreme network ?

HELP! I'm trying to get a new PC (that we know has a working wireless card-it works fine at Best Buy) to connect to my home Airport Express network?
It's an older Apple Airport, but I have multiple Mac's of various ages, an iPad, 2 iPhone 4S & an iPod Touch and they ALL connect with no problems.
The PC can see the network - it reads the name of it - but won't load any page. I keep getting a "this page can't be displayed" message, and in the windows task bar I can see multiple bars (indicating its connected) but it has the deadly yellow triangle with a ! on it....
I tried calling the manufacturer tech support and they had me delete & re-install drivers, but that did nothing. We took the PC back to Best Buy today and the techs there were able to log onto the internet - the Best Buy techs said that their in-store wireless router was old & slow.
So I am at a loss to get this PC to connect to the internet.
Any suggestions or thoughts are much appreciated.
Thanks
Dave B

Hi ...
Open Keychain Access located in HD > Applications > Utilities
Select Passwords on the left.
Type Wi-Fi (or the name of your Wi-Fi network0 in the search field top right corner of the Keychain Access window.
Then right or control click that keychain then click Get Info then selec the Attributes tab then click: Show password
You may need to entier your admin password to proceed.

How to Connect Airport Express to Existing Wireless Network (Client Mode)

I am posting this for everyone tearing their hair out trying to connect the Airport Express to your own existing home wireless network. After spending 2 hours last night installing this on my father-in-law's home network, I hope to be able to save someone else the agony we went through.
So here's the situation:
Say you already have your own home network set up, and all you want is to be able to use AirTunes to play music off iTunes into your speaker system. And, you don't need the printer sharing capability nor creation of another wireless network (2 of the features of Airport Express). Then this solution is for you - read on.
Unfortunately, Apple's user manual is very unclear how to connect Airport Express to your own network. When you look at the picture diagram they provide, they show Airport Express picking up its signal from another Apple-oriented base. This can make you think you need to buy another piece of hardware to make it work. DON'T If you read through the manual, the Support section here, etc., you will hear lots of talk about "Client Mode" - and that this is the only way to get it to work. Nice - but no one really tells you how to set up the Airport in client mode.
Do yourself a favor, toss that user manual aside and run these steps.
(Note: These directions assume your DSL/Cable Modem is hooked up to a wireless router or acts as its own wireless router)
1. Get a cat5 Ethernet cable (anything but an orange cable - that's a crossover cable) like you would use to connect your PC to your router to pick up the Internet.
2. Connect the Ethernet cable to the router on one end, and to the Airport Express unit on the other end.
3. Plug in your Airport Express unit to the wall (this will not necessarily become its permanent location - you will be able to move it later). The light will glow solid Amber for about 30-45 seconds while it starts up, then blink Amber. At this point, the unit is ready to operate.
4. Install the CD to the PC where your iTunes music is stored. This should be painless. Once you open the program, it should detect the Airport unit.
5. At this point, the on-screen wizard will present you with your options, and walk you through the setup. This is much like the user manual describes - and you should be good to go form here forward.
Some pointers:
- When asked if you want to create a new network, join an existing network, or connect via Ethernet, choose the middle option for joining an existing network. You will need to know the name of your network, the password to connect to the network (if present), and the type of encryption used on the network (e.g. WEP, WPA, etc.). Side note, WPA is recommended, as it is a higher level of security than WEP. You will be able to configure the Airport Express unit to automatically login to your network.
- I would recommend, when creating a password for the Airport Express unit, use the same password as your network, to avoid confusion.
6. The very last step will ask you to save the settings to the Airport Express. Here's the kicker - when you save the settings, you are TRICKING the Airport Express into no longer acting as a network broadcaster, but instead being a "slave" to your own network. What do I mean? You will lose the connection from your PC to the Airport Express - an error message will pop up telling you the unit can no longer be found. While you might think you did something wrong, you actually were successful!
7. Unplug your Airport Express, and disconnect the Ethernet cable from your router and the Airport unit. This will no longer be needed.
8. Go to your desired location where you want to plug in your Airport Express unit. Before plugging it in, connect your Audio cable from the Airport Express to your audio receiver. Once that is connected, then plug in the Airport Express unit. The light will glow solid Amber for 30-45 seconds while it loads, and then will blink Amber for a brief period of time before turning solid GREEN. When this happens, you have successfully connected the Airport Express to your home network!
9. Go back to your PC with iTunes. Open the Airport software - you should now have a listing for your Airport Express unit in the upper left. Click on this, and the wizard will guide you through connecting - you will need the password you created for the unit. You only need to go through this wizard once, and when finished, the software will tell you that can now use iTunes with your Airport unit.
10. Open iTunes. On the lower right, you will see a dropdown for Speakers, and it should be defaulted to My Computer. Click on that drop-down, and you will see the name of your Airport unit. Click on that name, and now your music will broadcast to the Airport unit!
11. Play a song in iTunes. Go to your audio receiver, and connect it to the channel for your external connection to the Airport Express unit. You should hear your music from iTunes. CONGRATULATIONS! =)
I hope these instructions were helpful - I am happy to answer any questions, so feel free to contact me, *******************@*****.**.
<Edited by Moderator>

Thanks for the detailed directions. You are absolutely correct in stating that people should toss the user manual; it's pretty worthless. I have had a problem setting up my new Airport Express as I have described in an earlier post - http://discussions.apple.com/thread.jspa?threadID=1839873&tstart=45
One quick question - does using your setup process set the AE up as part of a distributed network where the AE is acting as a wireless router where it is extending the range of your network? Or, is it simply a wireless connection to your stereo for iTunes? I am interested in having both, since my AE will be at the other end of the house from the main wireless router.
Thanks

I can no longer connect to the available wi fi networks with my ipad 1

For some reason I can no longer connect to the available wi-fi networks with my ipad...help

If no change after powering your iPad off and on and/or after a reset which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release, try resetting network settings on your iPad at Settings > General > Reset > Reset Network Settings. This will erase all saved wi-fi network settings from your iPad. This will require rejoining every wi-fi network your iPad has access to when returning within range of such a network.
If no change after this, try restoring your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after restoring as a new iPad, your iPad has a hardware problem.

Connecting my hp 5520e to a network on a HG533

Similar Messages

Maybe you are looking for