Connecting my Macbook Pro to Samsung 42" Plasma

Hi,
I have just purchased a new Samsung 42" plasma TV (PS42B450) and wanted to connect my Macbook Pro laptop (mid 2009) up to my TV and use as a media center. I got some advice from the Apple store and went off logged onto the website and bought Dr. Bott Mini DisplayPort to HDMI Adapter, then purchased a digital audio lead from Maplins and then expected it all to work...
I got the picture up fine and looks awesome but there is no sound? It is now driving me crazy and the only solution is now to buy another cable (Mini DisplayPort + USB Audio to HDMI Adapter) and from reading many forums and searching the web, is this the solution?
Has anyone else had this problem if so how did you solve it?
Many Thanks
Andy Sarbutt

Hi Andy,
I think you're mistaken. You are using the "DVI Audio In" input on your TV for the audio cable, correct? And, you're also using a digital (toslink, optical) audio cable, plugged into that input? If so, that will not work.
The specifications for the TV on the Samsung website make no mention of a digital audio input. I also looked through the manual for the TV at the link you gave. Page 9 shows the following image:
That is the cable that it shows going from the DVI audio output of some device (say your MBP) and into your TV on the other end. It is clearly a 3.5mm (1.8") analog lead, not a digital (optical) cable.
I still think you need a standard 1/8" to 1/8" stereo minijack cable to get sound on your TV. One with a headphone plug on both ends.
Let us know how it turns out, if you do find one of those.
--Travis

Similar Messages

  • Connecting a Macbook to a Samsung 5054 Plasma

    Can someone help me out with connecting my Macbook to my Samsung 5054 Plasma. I have the mini dvi to video adapter, but I still don't get a picture? Please help. Thanks so much.

    What sort of input does your plasma allow? HDMI or DVI would be best. VGA would be OK.
    I connect to my Panasonic plasma as follows:
    Macbook==> mini-DVI to DVI adapter ==> DVI to HDMI cable ==> Yamaha RX-V663 receiver HDMI in ==> HDMI cable out ==>Panasonic plasma
    Of course having the Yamaha receiver in the chain is optional, but in my case I also run digital optical audio to the receiver.

  • Wireless connection between Macbook Pro and Samsung TV

    Anyone who knows how to connect my Macbook Pro to a Samsung TV UE46D7005 and by doing this wireless? Thanks for your help!

    You could start by inquiring from Samsung and while you wait for an answer google, "Samsung TV UE46D7005 and Mac" and check out those links.

  • Problems connecting 2009 macbook pro to samsung plasma tv(pn50b450b1d)

    So I am using a macbook pro running osx 10.6.8 and I am having trouble connecting it to my tv. I have tested the cord on other tvs and it works fine. but when I connect to my tv my mbp screen flashes blue once then goes back to the desktop. If I am already plugged in to my tv and change to the source I am plugged into the mbp screen will flash blue twice before going back to the desktop. The tv screen has a moving box that says "no signal". When I am in the "displays" section on my mbp I dont have a "arrangement" tab and when try clicking "gather windows" or "detect displays" nothing changes. ANY help would be greatly appreciated. Thank you.

    The MacBook Pro hardware guys hang out in the Discussions > MacBook Pro forum:
    http://discussions.apple.com/category.jspa?categoryID=190

  • What is needed to make the right connection from MacBook Pro to Samsung HDTV 1080p??

    Using macbook pro  w/Mtn Lion O/S to connect to Samsung LED ultra thin flat screen TV with DVI/HDMI cable to DMI input on TV.  This connection works only for screen saver photos and not much else- no audio and no video and no mac screen output. 

    Using macbook pro  w/Mtn Lion O/S to connect to Samsung LED ultra thin flat screen TV with DVI/HDMI cable to DMI input on TV.  This connection works only for screen saver photos and not much else- no audio and no video and no mac screen output. 

  • How to connect Macbook Pro to Samsung Flat Screen TV

    How do i connect my Macbook Pro (2-3 years ago) to Samsung Flat screen TV (Samsung UN22F5000 22-Inch 1080p 60Hz Slim LED HDTV). Currently, I just discovered that my HDMI port on the TV said "DVI". So, i came to the conclusion that I need to get the DVI to HDMI cable (male-male), and mini display-port to DVI (female) adapter cable for Macbook Pro. The question is am I correct?
    I have tried looking at the back of the Samsung flat screen, but there has no VGA to PC port (female). Therefore, i googled and tried to find a way to connect my Mac to the Samsung flat screen TV. As i mentioned above, I came to the conclusion that I need those things. I just want to make sure that my assumption is correct. Thank you

    Dear Varjak Paw,
    Thank you for replying to this topic. Yes, it is true that there are 2 HDMI ports. However, one of the HDMI ports has something written on it, which is (HDMI In 1 STB). While, the other one stated "HDMI In 2 DVI". Moreover, I tried to plug in the HDMI cable into HDMI In 2 DVI, and it doesn't fit. While, plugging in to the STB does fit. Do you know what are the differences?
    Thank you
    Sincerely yours,

  • I am battling to connect my MacBook Pro to my new Samsung D7000 Smart tv. Both the tv and the macbook are on the same wireless network. Any ideas on how to solve this problem?

    How do I connect my macbook pro to my samsung smart tv its the D7000 and has all share?

    My suggestion is to get the magic trackpad, magic keyboard and magic wand and connect a DVI to HDMI cable and use the MBP in clamshell (closed) mode. This will allow you to run 1080P into the TV and essentially use the Samsung as a HUGE monitor. At that point you can use the TV itself to display whatever you want off the laptop or simply switch inputs and stream stuff out of smarthub as usual. I tried to connect mine via allshare (by the way samsung has the free allshare download of software for the PC but not the mac.) and while i DID have some succes (under windws) i had to run a non secure connection and in the end the cool factor wasn't worth the hassle, to me anyway. It was sort of a "cool i did it" now why bother..... Hope this helps.

  • I just bought a panasonic  50" plasma tv model TC-P50X3 and i want to connect my macbook pro with my new ty how do i do that?

    i just bought a panasonic  50" plasma tv model TC-P50X3 and i want to connect my macbook pro with my new ty how do i do that?

    Assuming your MBP is a recent model, i.e. bought in the last couple of years, and that your TV has HDMI inputs (if you've bought it new then that's a safe assumption) then you need a mini-displayport to HDMI cable.  The Apple Store sell one:
    http://store.apple.com/uk/product/H7128ZM/A/mini-displayport-to-hdmi-cable-2m?fn ode=MTY1NDA3Ng&s=topSellers

  • What do i need to connect my macbook pro to my samsung widescreen tv?

    My Samsung Widescreen TV has a hook-up (15 pin connector/serial port?) for a PC. What do I need to do to connect my MacBook Pro to it and can I use the TV as the monitor or for viewing an internet website?  I'm trying to use the larger screen for a meeting of several people to discuss website improvements?
    Thanks

    If you can tell me whch TV & MBP you have i can give you exact cable part numbers and settings but short of that i'll try & see what i can do for you. Older MBP do not support audio over the HDMI & by default VGA doesn't either so will need an audio cable in addition to the video regardless which input you use. aparently newer MBP Do support audio over HDMI so as long as your TV does also you're a one cable hookup. My Samsung has a specific HDMI port labled DVI/ HDMI which accepts a cable i got at the apple store & simply plug  play. Look in your samsung manual to verify what resolutions the TV suppports, select the input & mode from your menue and set the resolution & you should be good to go. Obviously you'll need to do a little tweaking inorder to optimize the screen but assuming you're familliar with your mac to begin with it's a no brainer. you might not be able to run optimal resolution on the TV untill you close the lid (clamshell mode) on the MBP which means you need a key board & trackpad or mouse. on the other hand if you are attempting to mirror the displays or use it as a 2nd display those modes are also available from the MBP setup. you can detect & gather your screens & calibrate the screens right on the MBP (under dispalys) and once you have the TV reckognizing the input it's nothing but a monitor. now all of the above assumes you are NOT running Lion as i'm NOT. I hope this at least gets you in the ballpark.

  • Problems connecting my macbook pro to my samsung led Tv

    Hi. I try to present some pictures and videos by connecting my macbook pro to my samsung led Tv but my mac doesn't recognize the Tv (or it could be that my TV doesn't recognize the mac). What should I do?

    I have problems too with some projectors and the DVI--VGA adapter that came with my MBP. The projector is recognized by the computer, but does not show any signal.
    With the help of Stéphane Madrau, who has written the excellent tool SwitchResX, I found out that the projector reports that it takes digital input when I connect the MacBook Pro, but analog when I connect it to my 12" PBG4. From the DDC information (collected with SwitchResX):
    MacBook Pro, DVI--VGA:
    Input signal & sync:
    Digital
    PBG4, miniDVI--VGA:
    Input signal & sync:
    Analog input with: 0.700V / 0.300V
    Separate Sync
    Composite Sync
    Given that the VGA cable is analog only, I would think that the MBP tries (or rather, does) output digital signals only, which don't make it into the VGA cable. If I find a solution I will post it here.
    The clue was that the computer did not report any vertical scan frequencies for the external display, while it did so for a projector that worked.

  • "No Signal" on my Samsung TV when trying to connect my MacBook Pro

    When I try to connect my MacBook Pro to my Samsung HDTV it says no signal. My Pro doesn't flash blue or anything. I'm using a rocketfish adapter with an HDMI cable connected to it. I got my Pro in June 2010. Any idea on how to get this to work?

    Hello TT31,
    A quick fix you might attempt would be making visible, then clicking, the 'Detect Displays' button in the Displays pane of System Preferences. It can be made visible by holding the Option key once you've brought up the Displays pane (it will appear at the bottom right near the question mark).
    OS X Mountain Lion: About the Display pane of System Preferences
    http://support.apple.com/kb/HT5369
    If that doesn't get things working, I'd recommend taking a look through the following article, as it provides a whole host of useful troubleshooting steps for just such a situation.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Allen

  • I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • Hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

    hellow everybody ok! i dont speak english well but just i want to know what is the best resolution to connect my macbook pro to mi led 55" samsung tv

    1080i or 1080p

  • MacBook Pro to Samsung sound bar Bluetooth not connecting

    Hello all,
    I recently purchased a Samsung sound bar with bluetooth connectivity. I can connect my iPhone 5s to it and stream music with no problem. But when I try to connect my MacBook Pro, it simply connects and promptly disconnects. I have tried shut down, restart, and even unplugging the battery on the MacBook with no luck.
    I am running OSX 10.9.3 with all available updates.
    Has anyone else had this problem?
    Thanks,
    Jerry

    Same here I'm using a Samsung HW-H550 Sound Bar - Connect's with iPhone/iPad on IOS 7.1.1 on my Mac Book Pro Retina OS X 10.9.3. Having no joy even went down the root of deleting the Bluetooth Pref file  didn't work either.
    Looking forward to any workable solution

  • How do i connect my macbook pro to my tv wirelessly?

    How do i connect my macbook pro to my tv wirelessly? I have MacBoock Pro 13 inch OS X 10.6.8 and Samsung LED 8000 series

    Thanks for your reply.
    I am able to print wirelessly through my MacBoock Pro
    My TV discover other devices PC etc but not my Mac

Maybe you are looking for