Connecting my mobile to my new BT hub

Can anyone tell me if I can connect my mobile phone to my BT hub? If yes, how do I do it? My mobile contract is with 3 if that makes a difference.
Solved!
Go to Solution.

if your phone has wifi capabilities then follow this http://community.bt.com/t5/BB-Out-About/any-news-on-voip-for-touch2-hero/m-p/12877#M1192
I have set up my desire without any problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

How to connect my hp all in one printer to a new wifi hub?

i have a printer all in one and its abiut 3 years old ! we desperately need to print off some documents but are rrally struggleing. we have not used the printer for a long time and since the last use we have got a new wifi hub and new computers all of which are windows 8! i have 2 questions firstly the most important being - can you setup a hp all in one printer onto a windows 8 laptop? and secondly how do we connect our printer to a new wifi hub?
if it is possible to setup the printer onto a windows 8 pc how do we do it?
thanks, lucy

Please provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns.
If wireless, status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Can't connect to mobile broadband with NetworkManager and Huawei E1550

Hi,
I'm trying to connect to mobile broadband internet (3G) using my Huawei E1550 HSDPA USB Stick and NetworkManager but it won't work.
At first, the LED on the usb device seems to indicate that the connection is established, but immediately afterwards it starts blinking again (which shows that no connection is established).
nm-applet then tells me that I've been disconnected (although the connection was never established).
I installed usb_modeswitch and modemmanager and enabled modemmanager with the systemctl command.
The ID of the device is 12d1:140c, which is supposed to be right after the modeswitch.
Here is the relevant log:
[stecklars@Lars-NB ~]$ sudo NetworkManager --no-daemon --log-level=INFO
NetworkManager[1450]: <warn> (cdc-wdm0): failed to look up interface index
NetworkManager[1450]: <info> (cdc-wdm0): new Broadband device (driver: 'option1, qmi_wwan' ifindex: 0)
NetworkManager[1450]: <info> (cdc-wdm0): exported as /org/freedesktop/NetworkManager/Devices/2
NetworkManager[1450]: <info> (cdc-wdm0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
NetworkManager[1450]: <info> (cdc-wdm0): deactivating device (reason 'managed') [2]
NetworkManager[1450]: <info> (cdc-wdm0): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'disabled' --> 'enabling' (reason: user-requested)
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'enabling' --> 'registered' (reason: user-requested)
NetworkManager[1450]: <info> WWAN now enabled by management service
NetworkManager[1450]: <info> Activation (cdc-wdm0) starting connection 'Verbindung mit event.vodafone.de'
NetworkManager[1450]: <info> (cdc-wdm0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
NetworkManager[1450]: <info> NetworkManager state is now CONNECTING
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) scheduled...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) started...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 1 of 5 (Device Prepare) complete.
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'registered' --> 'connecting' (reason: user-requested)
NetworkManager[1450]: <info> (cdc-wdm0) modem state changed, 'connecting' --> 'connected' (reason: user-requested)
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) scheduled...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) starting...
NetworkManager[1450]: <info> (cdc-wdm0): device state change: prepare -> config (reason 'none') [40 50 0]
NetworkManager[1450]: <info> (cdc-wdm0): bringing up device.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) successful.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) scheduled.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 2 of 5 (Device Configure) complete.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) started...
NetworkManager[1450]: <info> (cdc-wdm0): device state change: config -> ip-config (reason 'none') [50 70 0]
NetworkManager[1450]: <info> Activation (wwp0s26f7u3i1) Beginning DHCPv4 transaction (timeout in 45 seconds)
NetworkManager[1450]: <info> dhcpcd started with pid 1596
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 3 of 5 (IP Configure Start) complete.
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) started...
NetworkManager[1450]: <info> Activation (cdc-wdm0) Stage 4 of 5 (IPv6 Configure Timeout) complete.
dhcpcd[1596]: version 6.0.5 starting
dhcpcd[1596]: wwp0s26f7u3i1: soliciting an IPv6 router
dhcpcd[1596]: wwp0s26f7u3i1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
NetworkManager[1450]: <info> (wwp0s26f7u3i1): DHCPv4 state changed nbi -> preinit
dhcpcd[1596]: wwp0s26f7u3i1: soliciting a DHCP lease
dhcpcd[1596]: wwp0s26f7u3i1: removing interface
NetworkManager[1450]: <info> (wwp0s26f7u3i1): DHCPv4 state changed preinit -> stop
NetworkManager[1450]: <info> (cdc-wdm0): device state change: ip-config -> unmanaged (reason 'removed') [70 10 36]
NetworkManager[1450]: <info> (cdc-wdm0): deactivating device (reason 'removed') [36]
dhcpcd[1596]: exited
NetworkManager[1450]: <info> (wwp0s26f7u3i1): canceled DHCP transaction, DHCP client pid 1596
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: nm_system_iface_flush_routes: assertion 'iface != NULL' failed
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: nm_system_iface_flush_routes: assertion 'iface != NULL' failed
NetworkManager[1450]: <warn> (12) failed to find interface name for index
NetworkManager[1450]: <info> (cdc-wdm0): cleaning up...
NetworkManager[1450]: <info> (cdc-wdm0): taking down device.
NetworkManager[1450]: <info> NetworkManager state is now DISCONNECTED
NetworkManager[1450]: <warn> (pid 1596) unhandled DHCP event for interface wwp0s26f7u3i1
NetworkManager[1450]: <warn> (cdc-wdm0) failed to disconnect modem: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface 'org.freedesktop.ModemManager1.Modem.Simple' on object at path /org/freedesktop/ModemManager1/Modem/1
I'd be thankful if you could help me.
Lars

Here is the relevant part of dmesg, when the connection drops:
[ 1300.891794] option1 ttyUSB0: option_instat_callback: error -108
[ 1300.892296] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0
[ 1300.892316] option 4-3:1.0: device disconnected
[ 1300.894497] qmi_wwan 4-3:1.1 wwp0s26f7u3i1: unregister 'qmi_wwan' usb-0000:00:1a.7-3, WWAN/QMI device
[ 1300.906958] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.906966] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.906969] option1 ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.912513] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1
[ 1300.912535] option 4-3:1.3: device disconnected
[ 1300.912830] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.912837] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.912840] option1 ttyUSB2: usb_wwan_indat_callback: resubmit read urb failed. (-2)
[ 1300.917744] option1 ttyUSB2: GSM modem (1-port) converter now disconnected from ttyUSB2
[ 1300.917759] option 4-3:1.4: device disconnected
[ 1301.787207] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1302.653814] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1303.520436] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1304.387195] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?
[ 1304.387273] usb 4-3: USB disconnect, device number 20
[ 1304.993295] usb 4-3: new high-speed USB device number 22 using ehci-pci
[ 1305.132944] option 4-3:1.0: GSM modem (1-port) converter detected
[ 1305.133319] usb 4-3: GSM modem (1-port) converter now attached to ttyUSB0
[ 1305.137914] qmi_wwan 4-3:1.1: cdc-wdm0: USB WDM device
[ 1305.138503] qmi_wwan 4-3:1.1 wwan0: register 'qmi_wwan' at usb-0000:00:1a.7-3, WWAN/QMI device, ea:38:f6:b1:32:0b
[ 1305.138955] option 4-3:1.3: GSM modem (1-port) converter detected
[ 1305.139320] usb 4-3: GSM modem (1-port) converter now attached to ttyUSB1
[ 1305.139537] option 4-3:1.4: GSM modem (1-port) converter detected
[ 1305.139717] usb 4-3: GSM modem (1-port) converter now attached to ttyUSB2
[ 1305.139997] usb-storage 4-3:1.5: USB Mass Storage device detected
[ 1305.140144] scsi33 : usb-storage 4-3:1.5
[ 1305.143268] usb-storage 4-3:1.6: USB Mass Storage device detected
[ 1305.144927] scsi34 : usb-storage 4-3:1.6
[ 1305.183447] systemd-udevd[1917]: renamed network interface wwan0 to wwp0s26f7u3i1
[ 1306.157713] scsi 33:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 1306.161464] scsi 34:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2
[ 1306.168217] sr0: scsi-1 drive
[ 1306.168445] sr 33:0:0:0: Attached scsi CD-ROM sr0
[ 1306.178582] sd 34:0:0:0: [sdc] Attached SCSI removable disk
EDIT: Wow, got it working using wvdial. Would prefer to use NetworkManager and ModemManager, however. Any idea why it isn't working using those?
Last edited by stecklars (2014-01-23 18:50:45)

S860 and X2, Google not connecting on mobile network.

I live in Sweden. Had my S860 for 3 years and it has been working fine but some months ago it was not connecting on mobile network with crome and play store. Restart and it could work for some time the it was gone again. At the same time Hotspot, skype and OS update is working fine. Got a new sim card i november but it did not help. This was going more and more bad and finally it did not work at all. Tried to reverse OS a few steps back and still not working. So i tought that it was something to do with hardware. Now i bought a Vibe X2. Away from sweden for the moment (Saudi Arabia) but this one does the same when I try to connect. OS update working but Crome says ssl error and Play Store just wont connect. Saw some forums said it might be time and date that was wrong so i tried to change to local format but it was the same. My S860 i was waiting for 6 month before i could buy it (not for sale in Sweden) in Saudi. Haas been very pleased with it so now when it has been messing with me i had no problem to buy a new Lenovo phone. This time just waiting 3 month before i could buy it in Saudi. Hope this is something I can get some help to solve. /Nils

Hi Ragge
Can you tell me your firmware build number(for the S820 and Vibe x2) and Baseband version(for the S820)?Settings->About phone....
''Had my S860 for 3 years and it has been working fine.....Sorry, checked and it is a S820 i have.''
The S820 has been relesed in May 2013.
''Tried to reverse OS a few steps back...''
How did you do that?.
Can you install THIS ->Open the app->MTK Settings->Telephony/BandMode->SIM 1(Do the same for SIM2) and make a screenshot(Power&Volume-) ->post the screenshot here.Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

How do I get Lion machine 10.7.2 to connect to Mobile Me? I need my calendars, etc.

I bought a new Lion IMac 10.7.2 and moved over everything it could from my 10.5.8 Imac machine by using target mode since the two migration assistants didn't want to talk to each other.. But it did not move over my addresses, calendar, mail preferences, etc. Apparently Lion 10.7.2 won't connect to Mobile Me (but 10.7.0 and 10.7.1 could). I thought I had till June to move over! I need to keep some of my machines non-Lion because we have developed a ton of software over the years that won't run under Lion. We are upgrading now but it will take a long time to redo all our Director apps. I use IDisk every day to move files from my office machine to my home machine to my laptop to my remote office. This forced march to Lion will really kill my productivity if I can't use iDisk and if I have to archive all my calendar and address files and usb stick them over. I spent an hour and a half with customer service on the phone but he couldn't help me. I asked him point blank "I can see easily all the things I'm losing by going from MobileMe to ICloud. What am I gaining new that I didn't have before?". His answer: "just that it's free". He added "I can suggest some third-party paid solutions for you". He was nice but it didn't solve my problem. Already my iPhone and my iPad are no longer syncing with my Tiger and Snow Leopard machines - I guess they have left me behind. My iPhone shows an old calendar and old address book and my iPad 2's calendar and address book, like my new Imac, is empty. I've never known Apple to be so inconsiderate of their users that for some reason or another can not upgrade. (oh yeah, when you start up your new machine and it asks you if you want to transfer, do it THEN. Even though it says you can transfer later, it didn't want to do it without creating a new user and then we had to move everything over manually, fix permissions, HORRIBLE!) I've now wasted 8 hours on this migration and I give up. I'm still going to use my 10.5.8 and 10.6.8 machines untill I'm forced to abandon iDisk. Forcing you to change ALL your machines to Lion is not reasonable when you have some older, but still very capabile, machines that just can't handle the overhead. Anyone else manage to solve this problem? (Maybe my trouble is that I wanted to change the short_name on my new machine from a different short_name on my old machine?)

Sorry, just how much knowledge does it take to click on a link, locate a phone number for the UK, then dial it?
How do you back up? If you never bought a Mac how would you have backed up? Maybe read a book.
How do you use a compatibility chart? Why don't you check it out first before asking the question?
Rather than wishing you had never bought a Mac, think seriously about whether you're up to even owning any computer.

I am trying to connect my ipad to my bt home hub have put in wireless key code but still not connecting

i am trying to connect my ipad to my bt home hub have put in wireless key code but not connecting

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Port Forwarding not working on new Home Hub 4

Hi all,
I'm trying to get port forwarding going on a new Home Hub 4, specifically so I can access my Netgear Stora through its web interface on my LAN.
I've set the rules in port forwarding for the following ports:
Port 80 is HTTP Server
Port 443 is HTTPS Server
Port 21 is FTP Server
Port 22 is SSH Server
All these are now open and connect to Stora, which has an address supplied by DHCP.
However, when I check with various online port checkers, none of the ports are open and checking the trouble shooting logs of the BT Home Hub shows that the connection is being rejected. This is a sample of the message that is shown:
IN: ACCEPT [57] Connection closed (Port Forwarding: TCP 192.168.1.69:22 <-->86.141.184.236:22 [184.72.89.72:42894] CLOSED/TIME_WAIT ppp1 NAPT)
What can I do to make port forwarding work? I can't change the IP address of the Stora as I need to get into it via its web interface to do that.
I can navigate directly through Explorer to the files on the Netgear Stora NAS but not through the web interface.
Can anyone help?
Thanks.

i think by applying a static DNS i got it working, not 100% sure yet. edit: yep that worked, everyone can connect once again.
Message Edited by briantoxicity on 01-01-2008 04:59 PM

How do i connect my iphone4 to my new officejet 100 L411 printer

how do i connect my iphone4 to my new officejet 100 L411 printer? I feel like I have been misled by buying this printer because all my reseach said that the compatibility was fine. If I cannot use bluetooth can I conact by a cable at least?

Hi,
Firstly please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix
iPhone: http://www.apple.com/support/iphone/assistant/airprint/
If NO you have to print using other apps (if applicable) such as:
http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
More info from this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Fixing a IP address on new infinity hub

Hi All,
For various reasons I want to keep the same IP address on my laptop (wired connection).
So I went to advanced settings/home network/devices and selected "yes" to keep the IP address as the same.
Worked fine at first.
But now it seems to ignore the fixed setting and allocates a new IP address every time. Looking at the device lists there are numerous entries for the same laptop. Some with "yes" selected some with "no" selected.
Have tried deleting the extra entries but still have the same problem.
Anybody else had this problem or know a solution ?
thanks
David

Hi Ectophile,
It was set to receive a DHCP address. Last night I tried with fixed addressing. It works ok , but I've got over ten different OS installs. It worked fine with my netgear adsl modem/router. So I wanted to keep it the same with the new BT hub.
It makes life easier with new installs as most start with DHCP enabled.
It seems that the device list keeps the connected status and on a reboot of the laptop a new address is allocated ignoring the mac address associated with the IP address.
JDC

New Media Hub NMH405 - Transfer speeds

I have a brand new Media Hub with 2 Seagate 1.5 TB drives in RAID 0 (Linear 2), and the transfer and read speed are horrendous. The Media Hub has the latest software (2.17.13), and the drives are not the batch of drives that are affected by freezing/throughput issues. Maximum SMB transfers are aound 3 MB/s bidirectionally. Playback seems to be okay for the most part as long as I dont start more than one stream. The main networking device is a brand new Apple Airport Extreme which has 3 GBE and a dual band draft N accesspoint. Everything else seems to be in order, but the speeds are horribly slow.
I was going to put the device in single drive mode to see if the problem was the RAID, but I wanted to check first to see if anyone else had any ideas.
Message Edited by jedson328 on 01-24-2009 11:04 AM

I would like to get some info on your system that you are testing with - OS version, connection type (are you hardwired or wireless to your router), computer specs..etc.
How are you measuring the performance? Are you using a tool? We would love to make sure the Media hub is running at the best possible performance, and from all our testing internally and externally it is, so your issues are certainly a concern.

IWeb giving error message that I am not connected to Mobile Me - but I am.

Last week I created a web site on my brand new iMac and successfully uploaded it. However, I have NOT been successful in uploading any updates. After several hours, I got a message stating "iWeb couldn't connect to Mobile Me. Make sure your Internet conncection works and try again." I have done everything I know to try to resolve this problem and have been unsuccessful. My Safari Internet connection is working; I am connected to Mobile Me; I am able to upload to a folder; I do not have proxies on; I have restarted the computer and of course I have the latest SW since I have a brand new computer.
Is anyone getting the same error message? Any comments and/or suggestions is really appreciated.
JPbeth

This may be a long shot but check out this post from MacInTouch's site last Wednesday. It may work for you although for a different issue, email. But clearing out the MMe preferences may do it for you:
"Source: http://www.macintouch.com/readerreports/mobileme/index.html#d30jul2008
Page Title: MobileMe
Date: Wednesday, July 30, 2008 9:06:25 AM
Jim Oase
After waiting a day for the rolling restore to happen, I called AppleCare because Apple had sent an email saying my service was back, and it wasn't. I still could send and not receive using Mail.
Here is what fixed it. Go to MobileMe (terrible name) in System Preferences, log out. Then enter a garbage name and password and try to log in. This apparently clears the MobileMe preferences. Then enter your real UserName and PassWord. For me this was lights on.
I am left wondering how long ago I could have had email had I known this preference reset scheme."
OT

No network connection or mobile data connection

So I just bought mine, at first I thought its not a problem, it just take times to get a network line.
But seriously, the phone rarely got network connection and mobile data, if its got it the mobile data connection is only Edge.
I thought it was the sim problem.
There are no problem with the old one as I can still use it on other phone and it gets 3g mobile data connection.
But still I go and get a new nano sim card just to be sure.
Is there anything else I need to do or check before I go to the Sony Centre?

I repaired my device last night using PC Companion.
Today, when I left the house for work I had a 3G signal and mobile data was working. I drove 20 miles to work, which goes through areas where there is no signal, and when I get to the office I have no mobile data. I reboot and voila, 3G is back.
This is not acceptable. And as I have had the device more than 14 days, the retailer will not refund me.
So I am stuck with a £350 phone that doesn't work properly and no-one has any idea how to fix it.

New black hub

Been having trouble with disconnections on my Netgear router. Sky are sending me new black hub but I am apprehensive about this after reading on the forum the trouble users are having and there is a lot of bad publicity about this hub. Is anyone actually happy with the new hub? I don't want to go from the frying pan into the fire!

Personally, I never had any trouble with mine, but the majority of my kit at home uses a wired connection.
Wireless was just phones/tablets and the odd laptop, just basic browsing, which was fine.
However, it didn't cope well with high speed streaming (which my son frequently complained about once he discovered the joys of Minecraft videos on YouTube!).
My solution was to use a second, higher spec, router and disable the Sky Hub WiFi altogether.
Ultimately, only you can say whether or not it meets your needs.

Problems connecting Wii via wi-fi to Home Hub 5

Sorry if this has been posted before. New Home Hub 5 - but my Wii will not connect to the internet - although it clearly can see the hub. Nintendo book suggests using a static IP address or checking for MAC filtering - how DO i get into hub manager???

Use this link
http://bthomehub.home/
It could also be that the Wii has a problem with the dual frequencies on the Homehub 5.
Try giving the 2.4Ghz and 5Ghz frequencies different SSids. Just add a 5 to the end of the 5Ghz SSid so you know which is which. Check the 5 GHz Sync with 2.4 GHz: is set to NO.
You'll need to connect your other devices that can use both frequencies to both SSids if you want them to be able to use both frequencies.
See this link
http://bt.custhelp.com/app/answers/detail/a_id/44798/~/i-have-problems-connecting-5ghz-and-dual-band...
It might be that your Wii can not use the security that the homehub uses. You may have to change the WPA/WPA2 security to WEP on the 2.4Ghz frequency.
See link how to do that.
http://bt.custhelp.com/app/answers/detail/a_id/10360/~/how-do-i-change-between-wep-and-wpa-on-the-bt...

Hello, i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

hello,
i restored and updated my iphone 4 to the latest version of 5.1.1 and after that when i connect my mobile to i tunes all i see is a big rectangle and a apple logo on left and a small lock on right side please help me fix this problem.

I sloved this issue by resting my phone from settings>general>reset>reset all settings...the problem will be fixed

Connecting my mobile to my new BT hub

Similar Messages

Maybe you are looking for