Connecting my Philip's Hue System

I'm sorry if this is in the wrong place, couldn't find one specifically for this.
I am considering purchasing the Hue system. I live in a college dorm, and want to use it for when we are hanging out, and also for when I move into an apartment next semester. My question is this: I don't have a wireless router in my room (the college takes care of all of our wireless). With the bridge, it says I need to have it connected to my wireless router for it to work. Will it still work if the bridge is connected directly to the ethernet port in the wall?

You have enabled Extended desktop, which combines the two displays along an edge of your choosing. The mouse moves freely across the two displays, and can carry a window with it. You can even drop a window so that half is on each display, and it will scroll "the right way".
This visual is from the arrangement tab in displays preferences:
Note that these icons are proportional to the pixels on each display. You can re-arrange them by dragging. The white bar is the menuBar, which can be dragged to either display.

Similar Messages

How to confugure airport to connect to philips hue website

how to confugure airport to connect to philips hue website

Sorry, but I'm not familar with the Hue product. From what limited information I can gather the Hue Bridge attaches to an existing router via an Ethernet connection.
To link the bridge to the meethue website the bridge would just need to be connected to the same network that your computer is connected to. Then, it would be a matter of using a web browser on the computer to go to the meethue website and login. Is logging on to this website the issue? If so, does your computer have any issues accessing other websites?
I am assuming that when you set up the Hue Bridge that all of its status lights were solidly lit ... correct?

How to connect a Philips fidelio to airport extreme?

I just purchased an Airport Extreme Time capsule. I cannot connect my Philips fidelio AD7000W to the network. There are no WPS button on the Airport Extreme. There is a WPS printer connection option in the Aiport app menu option but nothing for sound system. Anyone knows how to make the connection ?

Instructions on how to connect the Fidelio to a non-WPS supported router is covered in the User Guide starting on page 13. On step 4 you would enter the specifics for your wireless network. That would be the network name, the wireless security type & wireless password. You will also want to choose the DHCP mode as enabled for these speakers.

Connecting a philips lx3600d 5.1 to a soundblaster live 5.1

Since buying my 5.1 system i have been trying to get digital sound from my pc i have looked everywhere for a cable solution to do it. I only have two phono (left and right) inputs on my philips home entertainment system for anx in. (unlike what they adtise about my system on philips website with 3 connectors i have not got a clue about and digital connectors)
So my question really is as i am ok with the simulatied surround sound though my pc already is there a fairly cheap cable soultion i could use to get either 5.1 or 2.1 (if it exists) digital sound from my computer.
Thanks for any help in advance
tyront
Apolgies if this sounds very newbie but i really have no expirence with connecting high quality sound systems up.

I don't think it's going to be possible to hook up all your speakers to your sound card. But I may be wrong. I think you need at least 5 line outs on your soundcard. One option is to take two speakers out of the equation. But I'm sure that's not what you had in mind.
It would probably be best to get a harman kardon receiver. You'll be able to hook up all your speakers and get better sound to boot. You can plug your receiver into the headphone jack (or line one out) on your soundcard using a RCA to mini Y-adapter http://www.monsterstore.com/home_av/...s/rca-mini.asp. Or you can bypass your soundcard altogether and get Xitel's hifi link which connects your computer to your receiver via USB.

Connection from SAP to our systems involving 2 saprouters

connection from SAP to our systems involving 2 saprouters
we have 1 saprouter inside a dmz and another for connecting to our systems.
we are guessing that this is possible
SAP (sapserv2) -
SNC----> saprouter1 (DMZ, SNC connection) -
> saprouter2 (P * * 3200) ---> SAP1, SAP2...
But how could we do that?
How can we let SAP know that they need to connect to 2 saprouters instead of 1?
The "Mantain System Data" in sap service marketplace only lets us introduce 1 saprouter.
And how should be the saproutettab of the 2 saprouters?
saprouter1:
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 000.00.00.00 *
P * saprouter2 3299
saprouter2:
P * * 3200
P * * 3600
is that possible?
Many thanks !!

Hi
As far as my experience goes with this you have to maintain both router information in oss1 tcode
Also mention second router on the second router tab on the SMP data
I hope it should work with that as it will automatically create router table

How to check connection from SAP to reservation system?

Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.

Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta

RFC connections do not work after system restart

Hi PI experts!
We're facing a problem with our PI 7.0 system. After each restart of the system, all RFC sender communication channels do not work. When testing the connection in the sending SAP system, the connection test fails. Currently we workaround the issue by manually restarting the RFC adapter after system restart.
Does anybody has any idea how th fix that problem? <<text removed>>
Cheers,
Matthias
Edited by: Matt on Apr 29, 2009 3:26 PM - don't offer points

Mathias,
Your problem is due to the fact that SAP is not up and running when XI restarts.
there is a parameter in RFC adapter that you can modify in order to fix that
Please, see the following link and let me know: /people/community.user/blog/2006/09/21/xi-rfcadapter-reconnect-issue
best regards,
David

Office 365 ECT to Azure Cannot connect to the LobSystem (External System)

I've tried to set up External Content Types to an Azure SQL database but when I access my page I get an error.
I basically followed http://www.pointbeyond.com/2012/12/31/surfacing-data-from-sql-azure-in-sharepoint-2013-online-office-365
Can you help me work out what i've not done, I don't know where to configure Azure firewall as this message suggests. The error is below:
Cannot connect to the LobSystem (External System). Reason: 'Cannot open server 'uf7prto4sj' requested by the login. Client with IP address '157.55.225.241' is not allowed to access the server. To enable access, use the Windows Azure Management
Portal or run sp_set_firewall_rule on the master database to create a firewall rule for this IP address or address range. It may take up to five minutes for this change to take effect. Login failed for user '*REMOVED*'. This session has been assigned a tracing
ID of '9389a67c-dc78-4134-9167-545ec963be3a'. Provide this tracing ID to customer support when you need assistance.'
Correlation ID:9a3fb39c-d0ea-1000-8099-2fad02009a01

Hi,
It depends, if it's a static IP address for your machine, it should be OK for this one IP address; if it is a dynamic IP address in a range, you can input the IP address range which contains this mentioned IP address
157.55.225.241, or update the changed address to date.
http://stackoverflow.com/questions/8543653/windows-azure-client-with-ip-address-xxx-xxx-xxx-xx-is-not-allowed-to-access-t
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you
have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

My iPhone 6plus will no longer connect to my Dodge UConnect system. Phone calls get a beep "phone call completed" message. Music will play though. Just can't make calls. Tried turning off iCloud and repairing but nothing works. It did work a few days

Hi Jpcbew,
The article linked below provides a lot of great information and troubleshooting tips that can help you resolve the issue with your iPhone 6 Plus connecting to you car stereo system.
Get help using your iPhone, iPad, or iPod touch with your car stereo - Apple Support
So long,
-Jason

Problem in connecting to Sap R/3 system through Crystal Reports

Hi
while I am connecting to Sap R/3 system through crystal reports i am getting an error
(" you do not have a necessary rights to design reports against sap system ")
can anyone sort out this problem?
Thanking in advance

you need to add some transport files while installing the integration kit for sap solutions.check whether all transport files are added

Custom iView Connecting to SAP R/3 system using JCA !!

I did not get any response on the Portal forum so posting it again in the WebAs forum ...
Environment : SAP Portal : EP 6.p SP2
I am using JCA to connect to the SAP backend systems.
The following code connects to the backend ...
IConnectionFactory connectionFactory = (IConnectionFactory) ctx.lookup("EISConnections/SAPFactory");
IConnectionSpec spec = connectionFactory.getConnectionSpec();
((Map) spec).put("client", "CLIENT_NUMBER");
((Map) spec).put("UserName", "YOUR_LOGIN_ID");
((Map) spec).put("Password", "YOUR_PASSSWORD");
((Map) spec).put("logonmethod", "UIDPW"); // or SAPLOGONTICKET
((Map) spec).put("Language", "YOUR_LOGIN_LANGUAGE");
((Map) spec).put("ashost", "YOUR_APPLICTION_SERVER_NAME");
((Map) spec).put("sysnr", "YOUR_SYSTEM_NUMBER");
IConnection client = connectionFactory.getConnectionEx(spec);
I want to use the message server for load balancing. Is there a way to specify the message server and logon group ??
These is the code to get the BAPI information ...
// Create interaction
IInteraction interaction = client.createInteractionEx();
IInteractionSpec interactionSpec = interaction.getInteractionSpec();
interactionSpec.setPropertyValue("Name", "REMOTE_FUNCTION_MODULE_NAME");
// Create IFunction instance
IFunctionsMetaData functionsMetaData = client.getFunctionsMetaData();
IFunction function
= functionsMetaData.getFunction("REMOTE_FUNCTION_MODULE_NAME");
// CCI api only has one datatype: Record
RecordFactory recordFactory = interaction.getRecordFactory();
MappedRecord importParams
= recordFactory.createMappedRecord("CONTAINER_OF_IMPORT_PARAMS"
and the following code populates the input table parameters ...
IStructureFactory structureFactory
= interaction.retrieveStructureFactory();
IRecordSet table
= (IRecordSet) structureFactory.getStructure(
function.getParameter("TABLE_NAME").getStructure());
table.insertRow();
table.setString("COLUMN_NAME_1", "VALUE_1");
table.setString("COLUMN_NAME_2", "VALUE_2");
table.insertRow();
table.setString("COLUMN_NAME_1", "VALUE_1");
table.setString("COLUMN_NAME_2", "VALUE_2");
importParams.put("TABLE_NAME", table);
The above code causes performance issues in the SAP system because the code is calling the following other BAPI through the JCA java api ...
1) RFC_GET_FUNCTION_INTERFACE
2) DDIF_FIELDINFO_GET
Looks like, the JCA library is not caching the metadata information for the BAPI instead for each call, it is calling other BAPI's to get the BAPI metadata information. Also, if I reuse the same IFunction class instance for all connections (Using Singleton Class), it seems to make less "RFC_GET_FUNCTION_INTERFACE" bapi calls.
The problem is with the input table structure which I need to populate for the BAPI. Every time the structure is populated, the internal BAPI's are getting called and it takes more time to populate the structure as number of users increases.
I am looking answers to the following questions ...
1) Specify message and logon group in JCA
2) Provide a way to cache the metadata for the BAPI's
More details about JCA can be found here ...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bc9baf90-0201-0010-479a-b49b25598ebf
I appreciate your help !!
Thanks
Bhabesh Patel

we updated JCO to the latest version for EP 6 SP2 Patch 8 and it fixed the issue.

Connecting to the R/3 System

Hi,
   Iam trying to Connect the Portal to R/3 System,even while testing the connection it is successfull..
And created New iView ,By selecting TransactioniView.
After this Step i just Previewed iView ,now iam not able to connect to the R/3 System.
Regarding this can any one help me.
Thanks
Venkat

Hi, Venkata
go through following steps
After creating R3 system, set following properties
-->Connector
- App. Host
- Gateway Host
- SAP client
- SAP System Name
- SAP System No.
- Server Port
- System Type
-->Alias
-->User Management
- Logon Method - UIDPW - From Personalization
-->Check the Connection Test
- System Admin. - Support - SAP app. - SAP Trans.
- Then select       - Alias
           - GUI
           - Transaction
Note :
- For getting access to r3 from portal SAP GUI must be installed on
Client browser.
- Test User must be having end user permission.
I hope u will solve your problem
If it helpful, Rewards Points.
Regards,
Nisarg

Connecting to remote R/3 system

Hello everyone!
I need information about connecting to remote R/3 systems. What I am looking for is something like what SAP does to trouble shoot client R/3 systems.
I have heard that SAP connects remotely to the SAP R/3 system using the SAP Connector to help rectify problems in the remote system. Is something possible for me to use for a client's remote R/3 system? We are also an SAP Software Partner (PBNW) so in case any SAP guy is looking at this, can you please tell me what we can do?
The rough requirement is to have a remote connection to the client's SAP R/3 system in order to be able to extract particular configuration data and such among other things. We have our own software for the extraction but we need special connectors to connect to remote systems. Is the SAP Connector a valid solution in this case?
Thanks for looking into it!
Sameer

If you want a thorough analysis of your system you can set up a Remote Service connection. To avoid any unauthorized access to your system, you first need to a open a connection for Remote Service. Only then can SAP log on to your system.
For more detailed information on setting up a Remote Service connection, see the guide The SAPNet - R/3 Frontend User Guide. You can download this guide from the following address: http://sapnet.sap.com/oss-guide .
Ready-to-Run R/3 contains a service and equipment package for setting up a remote service functionality between your R/3 Systems and the SAP service organization. The package contains hardware and software for routing and the organizational services required for setting up a remote service connection.
If you have problems using your R/3 System, or you require help, you can use SAP remote services. The TCP/IP connection between your systems and SAP is controlled by the router in the remote access package. One of the main functions of the router in setting up a remote service connection is the translation of private addresses (as defined in RFC 1918) to official external IP addresses, which are delivered with your remote access package.
Please refer to the link -
http://help.sap.com/saphelp_46c/helpdata/en/dc/37304a98ab11d283d70000e829fbbd/frameset.htm
Hope this helps you.

Logon issues when connecting to the R/3 system via System Template

Hi All,
I have created a System object for connecting to the R/3 system.
the R/3 system is on ITS server.
i have set the connector properties, ITS server details, User Management properties.
Connector Porperties: Application Host: -
, logical system name -
, SAP client---,SID---, System number -
server port-----,System type : sap_R3
ITS server details : ITS host name, ITS path :/scripts/wgate, Protocal :http
Usermanagement properties : Logon method : SAPLogontickets, user mappingtype : Admin/user.
Alias :Given the alias for the system created.
i have also checked with the connection tests. The ITS Connection is green. but the connection test for the connector is red.
Also the Portal user is not the same as the SAP backend user. So for this i have also made the user mapping, Under System Administration ---> Usermapping . ( we are using EP6.0)
When i finally created a SAP trasaction iview based on the Alias. and tried to preview it. it is showing me the error "
Name or password is incorrect, please reenter" .
but in the preivew if i give the user id and password which i have mapped under the user mappings it is entering the SAP trasaction.
kindly suggest what can be the issue?
Thanks & Regards,
Kavitha

Hi All,
Thanks for all your replies. And sorry from my side for the late reply.
I have followed all the suggestions made by every one of you.
Also Arun, i have checked with the blogs that you have sent. All the settings done by me are exactly the same as defined in the blogs.
but still the same error persists. also When i tried to Login with the same user id as that of portal . It is working fine.
Also while going through the blogs i have found that.. While doing the Connection tests. One of the test, Connection test for the connectors is failed. i am unable to know the reason for failure.
is this because of this reason, is the iview is asking for the re entering of user id and password ?
kindly help.
Also in most of the blogs i have found that for searching the Message server. When we are not sure of name of the message server the go to Transaction SMICM..... Where should this Tcode be entered. is it in the r/3?
Thanks & regards,
M.Kavitha harika.

J2EE fails to connect to the ABAP backend system

We have J2EE 640 Sp16 Abap+Java. As we configured this node in high-availability, we applied note Oss 757692 to the J2EE.
Anyway the J2EE does not come up.
Into the std_server0.out we see the following:
Service dbpool started. (1503 ms).
May 25, 2006 3:44:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_25] Fatal: User Management Engine
(com.sap.security.core.persistence.datasource.imp.R3Persistence) failed to connect to the ABAP backend system. Check that connectio
n data are correct and the backend system is available. Error message: "User not authorized (session closed)". Connection data (
obtained from properties of UME service in section "ume.r3.connection.master.": "{
passwd=********
receiverid=master
sysnr=00
client=100
poolmaxsize=10
user=SAPJSF
receiverid_guest=master
ashost=sap3
snc_mode=0
We double checked the set6tings of note 757692 and all of them seems to be correct.
We changed also the psw of SAPJSF in the ABAP stack and also in Global server configuration by mean of the configtool for the ume.r3.connection.master.psswd item
Neverthless we continue to recive this error.
What's wrong ?
Regards

Could it be because you tried to do this in an AS Java + AS ABAP installation? The note 757692 says quite distinctly, "This note covers the procedure for the j2ee engine only!" The statement does not make it clear if this note refers to only a standalone AS Java.
My saying so is not very helpful, but the note also goes on to say, "Should you wish to change the host name of a server in a test !!! !!! system, you should do so only with the assistance of an SAP!!! !!! consultant.!!!

Connecting my Philip's Hue System

Similar Messages

Maybe you are looking for