Connecting my samsung jet s8000 to btfon

can anybody tell me how to connect my mobile phone to btfon/openzone when on the move outside of my home. thank you. i have no trouble connecting to my bt homehub while i am at home.

You will have to reset the TVs network settings to default, then start again, as the BT Home hub used a different IP subnet to your old Orange router.
If you have problems, then manually set the TVs network settings to.
IP address 192.168.1.50
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.254
DNS Server 192.168.1.254
I am assuming that you are connecting using an Ethernet cable?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • Can't cleanly eject my Samsung Jet phone

    Hi boys and girls,
    I just bought a new phone (hear, hear). It's a Samsung Jet, also known on some markets as a Samsung S8000/8003. It's a nice phone, whose firmware I almost immediately flashed to get rid of the lousy décor my mobile provider (French Orange) had felt obliged to put in it. I've noticed one strange thing, though, and I can't tell if it's related to me flashing the ROM, because I hadn't tried to connect it to my MacBook Pro before changing the firmware: every time I connect the phone and the Mac with the USB data cable that came with the Jet, I can't seem to eject both drives (the phone's internal memory and the SDHC card); I click on the Eject button in the left column of the Finder, but after a few seconds, the icon pops back up. Since there are two drives to eject, I've barely ejected one and started to eject the other that the first one comes back online.
    Driving me nuts... Do you guys know any tricks to eject this phone cleanly?

    drDanRyan wrote:
    You mentioned you updated the firmware...
    How did you actually do that on a mac?
    I wish! To my knowledge, there's no way to upgrade a Samsung phone firmware from a Mac. I had to use my other PC with Windows XP and to install the necessary software, ie Samsung's New PC Suite, along with TKFile Explorer. But that's for another forum...
    As for my issue, strangely enough, both drives on my Jet show up on my Desktop, but not in the Finder... Heres's what hitting the Info button gives me, for the SD card and the internal memory, respectively (sorry, it's a French phone...):
    Nom : MEMORY CARD
    Type : Volume
    Identifiant du disque : disk1s1
    Point de montage : /Volumes/MEMORY CARD
    Système de fichiers : Système de fichiers MS-DOS (FAT32)
    Bus de connexion : USB
    Type de partition : DOSFAT32
    Inscriptible : Oui
    Capacité : 3,7 Go (3 960 995 840 octets)
    Espace libre : 2,6 Go (2 815 868 928 octets)
    Utilisé : 1,1 Go (1 137 385 472 octets)
    Nombre de fichiers : 0
    Nombre de dossiers : 0
    Respect des privilèges : Non
    Peut désactiver les privilèges : Non
    Peut être formaté : Oui
    Démarrable : Non
    Gère la journalisation : Non
    Journalisé : Non
    État S.M.A.R.T. : Non géré
    Numéro du disque : 1
    Numéro de partition : 1
    Nom : KFAT1
    Type : Volume
    Identifiant du disque : disk2
    Point de montage : /Volumes/KFAT1
    Système de fichiers : Système de fichiers MS-DOS (FAT16)
    Bus de connexion : USB
    Inscriptible : Oui
    Capacité : 1,4 Go (1 453 325 824 octets)
    Espace libre : 1,3 Go (1 422 983 168 octets)
    Utilisé : 28,7 Mo (30 113 792 octets)
    Nombre de fichiers : 1 024
    Nombre de dossiers : 0
    Respect des privilèges : Non
    Peut désactiver les privilèges : Non
    Peut être formaté : Oui
    Démarrable : Non
    Gère la journalisation : Non
    Journalisé : Non
    État S.M.A.R.T. : Non géré
    Numéro du disque : 2
    Numéro de partition : 1
    Aside from the French words, anything seems strange to you guys...?

  • How do I connect my Samsung Series 8000 plasma tv to my 27" imac

    How do I connect my Samsung Series 8000 plasma tv to my 27" imac (2.8 GHz Intel Core i7) to use as a display?

    Here you go (no financial or other interest in this web site or company):
    http://www.kanexlive.com/iadapt51
    I believe we have the same model of iMac (late 2009) in which unfortunately Apple did not provide audio signals in the mini-DisplayPort out port.  This Kanex adapter will pick up your audio as well as the DisplayPort signal and combine them in an HDMI signal that you plug into the Samsung HDTV.

  • Why can't I connect to samsung or htc device via Bluetooth?

    Why can't I connect to samsung or htc device via Bluetooth? or can't copy any picture or song from my laptop to Iphone 5?

    Because this has never been a feature of iphone/ipad/ipod touch.
    Ipod touch/iphone/ipad support bluetooth for handsfree telephone devices, stereo speakers/headsets, some keyboards, some peer-to-peer apps form the app store, and internet tethering where provided by the carrrier.
    Otherwise, they will not connect to another phone/device/computer.

  • Is it possible to connect 2 Samsung monitors to an imac 27"

    Is it possible to connect 2 Samsung monitors with a resolution of 1920x1080 to a new imac 27" with two thunderbolt connectors (per mini displayport to dvi or mdp to hdmi cable)? So that there is the full resolution on all three (Mac + two Samsung) monitors? And if its possible what do I need to do so?
    Thanks for the help

    I have no ThunderBolt iMac (mine is a 2009) nor one or two of these Samsung Displays.
    So I can't say or guarantee that the combination will work.
    Some displays simply don't work with Macs for no apparent reason.
    Best would be to take your MacBook Pro into the store where you want to buy the Samsung displays and ask for a test.
    Stefan

  • How do I connect ny samsung tab2 note to hp deskjet 2540 if you could please help, thank you

    how do I connect ny samsung tab2 note to hp deskjet 2540 if you could please help, thank you

    Hi,
    Your printer is not an ePrint printer as shown:
       http://www8.hp.com/au/en/products/printers/product-detail.html?oid=5296007#!tab=specs
    Please try the SECOND part of the following setup (for classic printers):
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817255&cc=us&dlc=en&lc=en#N65
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Cannot connect to samsung soudbar by bluetooth macbook pro

    cannot connect to samsung soudbar by bluetooth mac

    Hi guys, I have the same problem as well. I try to connect my Hw-h551 samsung sound bar with my MacBook Pro Mid 2010 OS X 10.9.5 (13F34).
    The pairing looks ok but when I try to connect, it disconnect after 1sec...
    Apple could you please help?
    I hope the new Yosemite coming next week is going to solve this issue...

  • Post moved Connected new Samsung TV to my LAN but...

    Moved http://community.bt.com/t5/Other-BB-Queries/Connected-new-Samsung-TV-to-my-LAN-but-has-problems/td-p...
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Hi Sprucie and welcome
    Firstly, can you remove the image you've posted as it gives the hub's SSID and your wireless password for connecting to it. Although the odds must be huge, if anyone near you read this and realised it was your hub, they would be able to connect to it.
    Secondly, from that screen, click advanced settings, continue to advanced settings and click on wireless. From there select another wireless channel, either channel 1, 6 or 11. Click apply when you've done this. Also the distance from the hub will affect the connection speed - how far away is it? - do other devices in the same room also operate slowly?
    Installing inSSIDer on a wireless enabled laptop would also be beneficial as you would be able to see what channels are used in your area - you're best to avoid heavily used channels.
    Also, ideally connecting via an ethernet cable would solve all this - but this isn't always practical. You could use powerline adapters
    -+-No longer a forum member-+-

  • How do I get a full screen pre-view on my ipad air when connecting my samsung NX 300 camera

    When connecting my samsung nx300 camera via wifi to my ipad air using samsung smart camera app I can only get a small pre-view window on the corner of the screen (80x40) The camera as been back to samsung and they have confirmed that it is working ok.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Doesn't solve your wifi connection problem, but you can use Apple's camera connection kit to transfer pics/videos from your camera. You can connect the camera to the iPad using a USB cable or use the camera's SD card.
    Using The iPad Camera Connection Kit
    http://support.apple.com/kb/HT4101
     Cheers, Tom
    http://www.samsung.com/global/microsite/SMARTCAMERA/howtouse.html

  • HT1665 I am trying to connect my Samsung Bluetooth device with my new Iphone 4S.  Can anyone explain how this is done?

    I am trying to connect my Samsung Bluetooth device to my new Iphone 4s. Can anyone explain how this is don?

    Which Samsung Bluetooth device?
    Please note that the iPhone will not pair with other phones, tablets, etc for purposes of file transfer.

  • Has anyone connected a Samsung ML1740 printer to I Mac 10.9.2

    Has anyone connected a Samsung ML 1740 printer to an IMac 10.9.2 & if so whar processes / steps were used
    Thanks

    The S.M.A.R.T. status is "verified"
    When I verify the volume, the first error is "invalid leaf count"
    Verifying volume “Data Hard Drive”Checking file systemChecking Journaled HFS Plus volume.Checking extents overflow file.Checking catalog file.Invalid leaf record count(It should be 4131310 instead of 4131311)Checking multi-linked files.Checking catalog hierarchy.Checking extended attributes file.The volume Data Hard Drive could not be verified completely.Error: This disk needs to be repaired. Click Repair Disk.

  • I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air. I can connect to samsung soundbar with my mac but the connection drops immediately. Please help  MacBook Air, iOS 10.9.4

    I can listen to my music with samsung soundbar wh 550 but i cannot do that with my mac book air.
    I can connect to samsung soundbar with my mac but the connection drops immediately. Please help.
    MacBook Air, iOS 10.9.4

    Contact Samsung for help.
    Barry

  • How can we connect our Samsung Galaxy Note 2 and 3 phones to our Mac?

    We are unable to connect our Samsung Galaxy Note 2 and 3 to our Mac.  When we tried to install Kies per the message on our phones, we got this message -"You can’t open the application “Kies3Setup.exe” because Microsoft Windows applications are not supported on OS X." Android File Transfer doesn't recognize the phones either.  Any suggestions?  Thank you.

    Right. An .exe file won't run on OS X.
    Does Samsung have a version of their utility for OS X? Download that version (though I seem to recall some crashes mentioned here by others who had it installed).

  • MacMini connected to Samsung 193P monitor - how do I brighten the display?

    MacMini connected to Samsung 193P monitor - how do I brighten the display?

    Strange place for it, but try System Preferenes>Universal Access>Seeing>Display, & the Enhance Contrast slider.

  • Connecting HP Office Jet Pro 8615 to Samsung RV511 via wireless

    Hi,
    I have just bought a HP Officejet Pro 8615 and gone through the procedures in connecting it to the wireless...
    I have the printer connected to my broadband routeer and the signal is strong with the wireless blue light solid on the printer as it should be (As explained in the manual)
    So ll good on that side....
    However, when I am going to connect my laptop to the printer via the same wireless connection it does not recognise the IP address of the printer or the host name, I have tried on several occasions and it just wont find the printer...
    Please help!!??
    Thanks,
    Ray

    Hi,
    Sounds like you want to connect the directly. Have you run the setup CD which come with the printer on your computer yet ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • PS elements saves pic as a blank file and I cannot open it

    Hey guys, I'm hoping you can help me. I am using Photoshop Elements 8 and I'm not sure what happened (or what I did), but suddenly the files I save (save-as, i rename retouched files) started saving as blank thumbnails. I cannot open them, and the pr

  • How do I change the pdf version when combining files

    I am using Acrobat 9 Standard and need to change the default pdf version when combining multiple files, it actually save in 1.6 but would need to lower to 1.4 to be compatible with a client. So far, I changed the .joboptions with no luck. Any idea? T

  • Not able to start Saprouter from services.msc

    Hi, We have installed a saprouter into Windows 2003 Server. It is running fine. When we start the system then we need to manually start the saprouter by a batch file, so i am trying to register a service so that we need not to start the router manual

  • ISR/Adobe Sending back fields from BADI in event request_check

    Dear Forum, Within my BADI implementation I want to alter some form data, after some user data has been entered. This applies to calculated fields from rather complex HR related data. Far to complex for Formcalc, but definitly as a response to user i

  • How to create non valuated material

    I need to create non valuated material Please help me to create the same. Thanks Rupesh