Connecting my SC-2345 chassis to my laptop
I have a SC-2345 that I use to collect bridge-based strain gauge data. For years now, I've been using a 6036e PCMCIA DAQ card to get the data into my laptop. However, I'd like to get a newer, faster laptop and no longer have the option of getting one with a PCMCIA slot. Can anyone recommend either:
1) A new way DAQ configuration to connect a laptop to my SC-2345? I'd like to not spend too much money, as I'd only be using it for this one application.
2) A PCMCIA to USB adapter that would work with my old 6036e DAQ card?
Thanks,
Jesse
Hello MonkeyBusiness,
1. About the first option, I went to the 6036e product page, as you could see NI recommends the PCIe-6341. But if you are using a laptop, the PCI bus is not the best option so could take a look to the USB bus usb-6341. You just need then the correct cable.
Please check this additional resource:
http://digital.ni.com/public.nsf/allkb/7D5FA5E680168A2586257AD8001030F1?OpenDocument
2. About your second option, please check the link below
http://digital.ni.com/public.nsf/allkb/A472CE9EC6438E59862573A9007892A1?OpenDocument
Regards
Frank R.
Similar Messages
-
i just connected my ipod touch 4g to my laptop and there is an update 4.3.3 available i was downloading it and just as it finishes it says your network session has timed out what ca i do? HELP ASAP PLEASE!!!
Try a direct download:
iPod, iPhone and iPad Firmware Download
Manually install it by holding your "Option" key down when clicking on the "Restore" button in iTunes and select the firmware file you downloaded. -
How to connect my nokia 6120c to my mac laptop?
how to connect my nokia 6120c to my mac laptop? i want to use my phone as my modem
Hi,
Listed below is the step by step intructions to configure the Nokia device as a modem to a mac. If you receive any cases/questions related to this, please provide the steps mentioned below.
Steps:
Connecting your Mac to the internet is convenient and easy with your a compatible Nokia S60 device. You'll need a Nokia S60 device that supports a 2G or 3G data connection (such as GPRS or HSDPA), a compatible Mac (with the latest OS X), a USB cable for your Nokia device or a Bluetooth-enabled Mac, and a network subscription with your mobile service provider.
To set up your device you'll need to know your operator's Access Point Name (APN) and have the packet data service enabled. For help with this please contact your operator.
-In the following example, the APN name "Airtel" is used. This name will vary depending on your operator.
-On your device locate and open the Settings application. This is normally in the Tools folder.
-In Settings select and open Connection >Select and open Packet data > Select and open Access point >Type in your operator's Access Point Name
-Exit Settings. Your device is now ready to be used as a modem for your Mac!
-Bluetooth Connection: Pairing between Mac and Device using bluetooth, follow the instruction from here:
http://europe.nokia.com/support/download-software/device-as-a-modem
Note: Preferred mode is USB as it much faster than Bluetooth.
Connect the device and then go to System preferences- >Network- >Select Device (Nokia XXX)
Click on Advanced Tab > Modem tab
- Vendor : Nokia
-Model:GPRS (GSM/3G)
-Telephone Number: *99***1# (contact your operator to get this settings)
-APN: airtelgprs.com (contact your operator to get this settings)
CID: 1
Once connected it will be highlighted in green.
Hopefully this helps.
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks -
When I connect my iphone4s to itunes on my laptop I get this error...itunes was unable to load data class info from sync serv
In the course of your troubleshooting to date, have you worked through the following document?
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert -
When I connect my iPod Touch to a new laptop (Macbook Air) the "Info" tab won't appear and therefore I cannot sync it with my new iTunes. How can I sync this iPod with the iTunes on my new laptop?
There is no Info tab in Mavericks
if you use OS X v.10.8.5 or earlier. If you use OS X Mavericks v.10.9 or later, your contacts, calendars, and other info are updated on your computers and iOS devices via iCloud. For more information, see iCloud Help at icloud.com.
iTunes 11 for Mac: Sync contacts, calendars, and other info with iPod, iPhone, or iPad -
I connected a new 2nd iphone to my laptop. When asked to setup as new or to restore from backup, I chose restore because I thought it would load all of the apps and their relevant data faster. Now I'm wondering if I shouldn't have done that. My 1st phone is my work phone and now my 2nd phone (personal) has my work Exchange information loaded in it and they are both syncing my personal phone number it seems. Maybe I should have set it up as new? How do I change that?
If you don't transfer the backup for your other iPhone or leave it as is, you must set up and transfer everything manually after restoring your new iPhone as a new iPhone or not from the backup.
-
I can no longer connect to the iTunes Store on my laptop, what could the problem be?
I can no longer connect to the iTunes Store on my laptop, what could the problem be?
Hi curterb,
If you are having issues connecting to the iTunes Store, you may find the following article helpful:
Apple Support: Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Regards,
- Brenden -
my laptop will not boot up from the storage hard drive but if i remove it from the laptop and connect it as portable hard drive my laptop boot up normal?
Do you have a compatible OSX installed on this 'storage' HDD? If not, it will not boot your MBP.
Ciao. -
How do I connect my Iphone 3GS to my new laptop? Downloaded Itunes only to be told there is a problem finding my 'pairing' don't know what this is, any ideas?
You might want to take a look at Printopia....although you may find that you need to have the printer connected directly to your computer for this work.
If you try it out, please post back with your results.
http://www.ecamm.com/mac/printopia/ -
I'm unable connect my I pad mini to my laptop(window 7,64 bit) after formatting,my iTunes didn't find my device,before format everything working properly but this time lot of problem plz help
You formatted your computer's hard drive? If so, it's like starting with a new computer unless you restored all of your content from a backup but it does;t sound like that's the case.
See wjosten's excellent how-to here: Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
How i will connect my i pad to my personal laptop for syncing my own data?
how i will connect my i pad to my personal laptop for syncing my own data?
Sync iPad with computer
Each time you sync, your content updates between your iOS device and computer to show new, updated, or deleted content. You can change your sync options at any time.
Syncing with iTune
http://support.apple.com/kb/HT1386 -
I have a modem, and a separate (hard wired from modem) router in a part of my house that gets poor reception from the modem.My iPad won't connect to the auxillary router like my laptop does with ease. How do I get the iPad to connect? It does see the router in my wi-fi connections list - just won't connect. !
This article will provide a troubleshooting framework.
http://support.apple.com/kb/TS1398 -
my phone touch system has been destroyed i have to make a backup in laptop but when i m connecting ma device to itunes of ma laptop so its saying your device have a paascode like ma phone touch system is not working how should i type ma pass word ??? is there any way to open ma device from laptop nd sync my data , contacts etc to ma laptop ... i have to make my phone repair then...please help with thiss...
Sorry No, if your screen is broken, then you won't be able to unlock your phone.
You do backup your phone on a regular basis right? -
Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple storeI have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.
-
I Connected my ipad air2 to a different laptop and it synced. i lost all my photos, they,re asking for the apple id of the person who pwned the laptop. How can i retrieve my icloud account and how can i retrieve everything
Have you tried syncing with your own computer. The one you used to sync the photos to your iPad in the first place?
Do you have a backup of your iPad on your own computer? Or in iCloud?
If your iPad is stuck to the Apple ID and password used by the different laptop have the owner of that laptop remove your device from their iCloud account. They can go to iCloud.com on their laptop, enter their Apple ID and password and then remove your iPad from their account.
Once you sign into your own Apple ID and password and then sign in to your iCloud account, many of your lost items should come back. Specifically these include your Contacts andCalendar entries.
Maybe you are looking for
-
Csv upload -- suggestion needed with non-English character in csv file
<p>Hi All,</p> I have a process which uploads a csv file into a table. It works with the normal english characters. In case of non-English characters in the csv file it doesn't populate the actual columns. My csv file content is <p></p>First Name | M
-
Sure its a often asked question but want to know..
If I daisy Chain my two presonus FP-10 firepods together how can I get them to run simultaneously so I can record 16 tracks at once for like a live band or for more inputs for drum micing on a kit or the room..Ive tried to look on presonus and shows
-
How may I get spreadsheets from Appleworks 6 to open in Numbers
Oh, so this is how it works. Okay, Hi all. Old sys: G5 w/ 10.5, etc. New sys: Mac Book Pro w/ 10.9 Quest.: How may I get functionality out of my documents and spreadsheets that I created on the old system, in the new system? I'm just getting every
-
As3 code to support swf player with control buttons
i need code for swf player.the player consists of play, pause ,stop, next and previous with seek bar and time control.i had try my code which not support my swf ......the code is ............ function swfLoadedHandler(e:Event):void { trace("swf loade
-
New update to 3.15.5 seems to break bootloader, getting black screen
I did 'pacman -Syu' last night and today all I get is a black screen after post. It's the same behavior that I get with the live arch image when trying to use UEFI boot. I am posting this from a fedora live image right now. I originally had to ins