Connecting n96 to WPA Enterprise

Has anyone been able to connect a n96 to WPA Enterprise (TKIP Encryption; PEAP; EAP-MSCHAP v2) WLAN?
thanks.

Not sure what u mean by Enterprise but here is what I got my wireless router set with:
Authentication: WPA-PSK and WPA2-PSK
Encryption: TKIP
Wireless Mode: 802.11b/g
DTIM Period: 3
Maximum Connection Rate: 53 Mbps
I have mine set to a custom pass phrase key.
When I used the WLAN scan on the handset, it found my wireless network very easy then all I had to do was select it then enter the pass phrase key. When I first started my Nokia PC Suite, my router said there was a conflict and placed my N96 with DMOZ Enabled. A quick reboot of the phone then everything working fine.
I have a BT2700HGV router.
Hope this is of some help to you

Similar Messages

IPhone 4 - Not saving Wifi connections at work (WPA Enterprise). Help!

Hi everyone
I have an iPhone 4. I have no problem with my phone automatically connecting to my wireless network at home. When I go to work, my IT department gave me the network name, security, etc to connect to the company's wifi network. It connects rather quickly when I enter in the settings. When I turn the phone off and turn it back on again, it will not connect to the wireless network and does not "remember" the settings I have put it. Has anyone had this problem? Any recommendations?

bumping back to the top..... please help!

10.4.2 and WPA Enterprise NOT working

Dears,
I have 2 machines configured in this way:
- 10.3.9 with Airport card (no Extreme) and latest Airport drivers;
- 10.4.2 with Airport Extreme card and latest Airport drivers;
I try to connect to our WPA Enterprise wireless network and i got 2 different results:
- 10.3.9 connects and works;
- 10.4.2 returns an error, the logs show the following:
2005-08-18 13:23:17.601 SystemUIServer[380] EAPOLControlCopyStateAndStatus failed for "en1" (err = 6)
There was an error trying to get authentication status: 6
com.apple.network.EAPOLController not active
Before upgrading to 10.4.2 the same machine with 10.4.1 was able to connect to WPA Enterprise.
I further investigated on this, seems that under 10.4.2 the folder /System/Library/SystemConfiguration/EAPOLController.bundle is empty, while under 10.4.1 it contained some files (oh yes, I have the disk image of the workstation when it had 10.4.1).
Maybe the guru guys from Apple can see if the 10.4.2 updater deleted those files in error.. bye !

Hi Rick,
I did the following:
- Re-install 10.4.2 upgrade;
- Re-install Airport 4.2 upgrade;
- Repair permissions;
- Check Keychain.
I still got those errors in the logs:
2005-08-19 16:01:07.966 Internet Connect[280] EAPOLControlCopyStateAndStatus failed for "en1" (err = 6)
There was an error trying to get authentication status: 6
com.apple.network.EAPOLController not active
2005-08-19 16:01:07.971 Internet Connect[280] EAPOLControlCopyStateAndStatus err = 6
com.apple.network.EAPOLController not active
Using Internet Connect I can see our wireless network, that is correctly identified as being encrypted with "WPA Enterprise" but after I entered user/password I got the following error:
"WPA Authentication failed. There was an error trying to get authentication status: 6"
I double checked username/password, mac address, base station configuration (Cisco AP-1131) and Radius server, are all ok (the other mac, with 10.3.9 joins our WPA network succesfully).
I'm stuck here..

WPA Enterprise on Palm Pre

We have found that the Palm Pre will not connect to our WPA Enterprise wireless system, because our network needs clients to eliminate the "validate server certificate" process. For example, our standard laptops use the SecureW2 client and the "validate server certificate" needs to be disabled in the client software. If this option is enabled, the SecureW2 client won't connect either (just like the Palm Pre won't).
How can this be done on a Palm Pre?
Thanks.
PS-- the Palm Pre connects perfectly to WPA personal networks
Post relates to: Pre p100eww (Sprint)

juhanima wrote:
If the WiFi setup doesn't require a user certificate, you should select "None" for a certificate when defining the connection. The CA certificate(s) you installed earlier are used automatically as long as they are enabled for WiFi usage.
Here are the settings for the network for a Nokia N82. Maybe, this will help shed some light on the issue. FYI - I could not make these settings work for my Nokia N8 as well. The IT help desk says they are unable to solve the issue.
juhanima wrote:
The connection dialog is supposed to show only actual user certificates to choose from, but it is a known bug in the current N9 FW that if you install something that is not a CA certificate it is taken for a user certificate by default and shown as an option in the connection dialog. The bug will be fixed in the next FW update I believe.
I have only installed one CA certificate (the one which can be found at the link I provided above). It does not ask for any password when I install it. When I go to Certificate Manager and try to change the password it informs that there is no password for the certificate.
juhanima wrote:
On the other hand, if the connection does require a user certificate you should have received one from the network's administrator in a PKCS#12 package with a password. You need the password when installing the package and later when using the private key related to the user certificate. But it sounds like this is not the case, so just select "None".
Hope this helps.
Juhani Mäkelä
Harmattan certificate manager maintainer
So I did choose "None" as certificate. EAP Type - PEAP and EAP MSCHAPv2 as the EAP method. I could not connect to the network using these settings. The certificate was installed at this point. If I try connecting using the certifcate it asks me for the password. So, right now, it is a problem connecting to the network. Would appreciate any help in this regard.
Cheers
Rahul

WPA Enterprise on Macbook Pro Core 2 Duo, late 2006 model

Hi all.
I have the most bizarre problem when connection the a WPA Enterprise network.
I am running 10.4.10 with all the software updates and latest network fixes.
I am able to connect to WPA Enterprise network (hidden) when I enter the network name, username and password under 'preferred networks' in the System Pref., Network section. Once I disable the airport and enable it again, it will automatically logon to the WPA Enterprise network.
However, if I remove the WPA Enterprise network from the 'preferred networks' list and try to manually logon, by clicking on the airport icon in the menu bar (next to the speaker and battery icon), using the same logon credentials, I get a 'WPA Enterprise authentication failed. Please contact your network admin ...'.
(Connecting to any(!) other type of network works fine)
I have phoned apple support, but was told they are not aware of any such problems with WPA Enterprise on 10.4.10.
I would be most grateful to hear from others who have problems connecting to a WPA Enterprise networks via the above methodes.
Thanks.
Chris

See if your computer is compatible with Lion. The license allows you to install it on computers you own.
Computer Compatibility - Lion Lion
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
If you buy the Snow Leopard family pack, you can install it on 5 computers in your family. You might have to look at Amazon and other places to find it.
http://wiki.answers.com/Q/How_many_computers_can_you_install_snow_leopard_on

WPA Enterprise Connectivity

Hi - I'm currently in Baton Rouge, LA and attend school at LSU. Our wireless network, lsusecure, is WPA Enterprise, which is supposed to be compatible with iPhone 2.0. The problem is, I can't seem to connect to the network. I enter my LSU username and password, which works for connecting on a computer, and it consistently says "connecting to lsusecure" but nothing ever happens. I was just wondering if I will have to enter in more information about the network rather than just using my regular login information. If anyone could help, I would greatly appreciate it, as Tech Services at LSU currently has no information on how to connect.

Guidedbyvoip, sorry your IT Dept is no help.
But, here at LSU, we are here to help! Hope these directions can work for you as well, instead of needing a 3rd party config util!
ccastl1, please follow the following directions to configure your iPhone to connect to our LSUSECURE wireless network.
Note: The device must be updated to firmware 2.0 in order to connect to lsusecure
1. Select "Settings"
2. Select "Wi-Fi"
3. Make sure Wi-Fi is turned on. If the device is connected to any other network other than lsusecure (it will usually connect to lsuwireless first) you must remove that network before connecting to lsusecure.
4. Select the network it is connected to by pressing on the blue arrow to the right of the name.
5. Select "Forget this Network"
6. Choose "Forget Network"
7. Select lsusecure
8. Enter your PAWS Username & Password and press "Join" at the bottom right of the keyboard.
9. Accept the certificate by pressing "Accept"
You are now connected to lsusecure!
Please contact us directly if you have any further questions or problems!
Thanks!
< Message was edited by: Host to remove email address>

Connecting MBA to domain using WPA Enterprise

Hi guys!
I'm having "the usual" new MBA WiFi-problems, meaning my MBA keeps dropping the WiFi connection occasionally, but that's going on in another thread.
I don't know whether this is a related problem, but I can't seem to connect the MBA to the WiFi network at the office at all. The network connection dialog tells me my connection needs WPA Enterprise credentials, but no matter what I write, I won't get connected.
So I'll start with the basics. This works for every other device I have (PC laptop, iPhone, iPads and so on):
Username: \\MyDomain\MyUserName
Password: MyPassword
But not for the MBA. For the domain/username, I've tried single \´s and /´s and just about any combination just in case this is a "Mac syntax thing" (this is my first Mac laptop), with and without the MyDomain part, lowercase, uppercase, quotation marks around the password (as I saw mentioned in some thread in the case of alphanumeric WEP, or some such), but nothing works. I don't remember the exact error message, but it has to do with the authentication server perhaps not being available.
Apparently others have had problems with the WPA Enterprise connections as well, but could somebody just confirm that the \\MyDomain\MyUsename -syntax I'm using is indeed correct.
Cheers,
Kim

Marc,
I'm suprised that WPA works over WDS. I had thought that because WPA cycles the encryption key with each message transmission that the two Airport devices would quickly get out of sync.
But I do respect Alan's opinion, so I'd give in to his statement that it does work, I'll be searching through the update readme's to see when it started working.
You could always drop back to WEP encryption. Unless you have the FBI next door listening in and analysing all your network traffic, it's not going to be broken.
WPA changes the encryption key with each wireless message, WEP doesn't. So in theory, with WEP, someone could analyse all your network traffic, looking for patterns. You can work out just how hard that is.
If you choose an obvious password (like from a dictionary) it won't matter if you're on WPA instead of WEP, the Feds / hackers will be in in a short time.

802.1X Authentication fails when connecting to WPA Enterprise using Leopard

I'm trying to connect to an office WiFi network with my MacBook Pro which has 10.5.1 installed.
There are instructions on how to connect using Tiger which are very simple:
1. Enter network name
2. Wireless Security: WPA Enterprise
3. Enter domain credentials for username and password fields
4. 802.1X Configuration: Automatic
There are at least two people here using Tiger that can connect using these instructions.
I've tried the same thing with Leopard and keep getting an error dialog stating "802.1X Authentication has failed."
I've also tried fiddling with the 802.1X tab under "Advanced" (I know the protocol is PEAP), but no matter what I get the same error.

Turns out I was not authorized to use the WiFi. IT got me setup and everything works now.

AP541N - WPA Enterprise - Failed to connect

Hi,
I am trying to configure an AP541N with WPA Enterprise. My RADIUS server is an MS ISA 2003 and is already working fine with other devices (I have a ASA5510 also configured to use RADIUS authentication with this server). When I try to connect, I am getting the following error message on the event log of the AP541N:
Aug 4 18:37:36
info
hostapd
wlan0: IEEE 802.11 STA 00:19:d2:9e:7a:81 deauthed from BSSID 00:21:29:01:60:e0 reason 1
Aug 4 18:37:36
info
hostapd
wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: Supplicant used different EAP type: 1 (Identity)
Aug 4 18:37:36
warn
hostapd
wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: authentication failed - identity 'MYDOMAIN\myuser' EAP type: 0 (Unknown)
Aug 4 18:37:36
info
hostapd
The wireless client with MAC address 00:19:d2:9e:7a:81 had an authentication failure.
Aug 4 18:37:36
warn
hostapd
wlan0: STA 00:19:d2:9e:7a:81 IEEE 802.1X: could not extract EAP-Message from RADIUS message
However, I do not see any error message on the ISA side. It actually tells me that the authentication happens fine. Any suggestion how I could troubleshoot this problem?
Thank you in advance for your help and have a great day,
Alex

After investigation, I found that my ISA server was not configured properly. Here is the URL I used to configure it properly: http://technet.microsoft.com/en-us/library/cc779009(WS.10).aspx

MacBook Pro 15" Not Connecting via WPA-Enterprise

My company just added an WPA-Enterprise based wireless router, I can connect to it fine with my iPad/iPhone, I've also connected an Android device and Windows XP & Windows 7 computers to it with no issues (the Windows boxes belong to other users on the network), but I can't seem to connect my Mac to it. It asks for credentials (like a WPA-Enterprise connection should), but then it doesn't seem to hand-off the credentials properly. Since this network is in it's early life at my company (and because my MBP is an unsupported platform), I'm not getting much help from the office (don't gripe, it's the way it is). Any ideas as to why I can't connect via my MBP when it's so easy to connect via all my other platforms?

My company just added an WPA-Enterprise based wireless router, I can connect to it fine with my iPad/iPhone, I've also connected an Android device and Windows XP & Windows 7 computers to it with no issues (the Windows boxes belong to other users on the network), but I can't seem to connect my Mac to it. It asks for credentials (like a WPA-Enterprise connection should), but then it doesn't seem to hand-off the credentials properly. Since this network is in it's early life at my company (and because my MBP is an unsupported platform), I'm not getting much help from the office (don't gripe, it's the way it is). Any ideas as to why I can't connect via my MBP when it's so easy to connect via all my other platforms?

Mountain Lion won't connect to WPA-Enterprise

Configuration: Macbook Pro (8,2) running OS X 10.8.3.
My office's "IT Guy" changed our Wifi network recently, with the surprise side effect that the Mac users are now offline, including me. The odd thing is that my iPhone connects very nicely, as does my Windows (Bootcamp). When I'm booted into Windows and connected, here is the information I can glean from the network manager:
Security Type: WPA-Enterprise
Encryption Type: TKIP
NW Authentication Method: PEIP
He suggested I buy a little USB stick that would connect me, but that is over my "lame-ness" limit. The fact that the iPhone can connect but the Macbook can't is a little worrisome. Do I have any hope, assuming that firing the IT Guy and buying the USB stick are both off limits?

I had a similar situation happen to me today. Connecting to an Enterprise WPA2 network, and it authenticated correctly via PEAP (MSCHAPv2) but still would not show a good Connected status.
What seemed to work was to go into Network preferences, click the Advanced button, Select TCP/IP tab, and click Renew DHCP Lease.
Not sure why the MacBook did not connect, while the iPhone did, but this seemed to give the connection a good Connected status and the exclamation point on the WiFi network went away.
And it's been 15 minute and the user has not come back to bug me again!

Power Mac G4 won't connect to WPA Enterprise

At the university that I work at we are updating our wireless network to use WPA Enterprise only, instead of WEP 802.1x and WPA Enterprise. The computer that I am having problems with is our test machine for writing connection documentation for the students, faculty, and staff. I can get the computer to access the network trough WEP 802.1x but not WPA Enterprise. The computer will start the connection process and then fail and not connect to the network.

First, make sure you have at least these versions of the Airport software:
107795- AirPort Card: When You Can Join a WPA Network
Then read this article about set-up, including WPA Enterprise:
107921- AirPort for Mac OS X 10.3 or later: Using different types of wireless security (WEP and WPA)
"For a school or business, WPA Enterprise can provide each user with unique credentials. WPA Enterprise uses the same security as WPA Personal, but with the added measure of individual usernames and passwords (WPA Personal uses a shared password). Each wireless base station communicates with a RADIUS server to authenticate the user's credentials."
"You may need the help of a network administrator to join an 802.1x network."

IPad WPA Enterprise connection

I am setting up a bunch of iPads at work and I keep getting "Unable to Join Network" when I try to login to the WPA Enterprise network. I successfully set up about 8, but for some reason I still can't get this one going. I have tried reseting the network settings, reseting the iPad to factory condition... nothing seems to work. Any help would be very much appreciated.

Try updating the WLAN drivers and see if it helps.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015011
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Does WET200 support WPA-Enterprise/TKIP?

I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network.
Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help!
Thanks a lot.

B**r!!!
oh well, one can only hope that there'll be an upgrade real soon now
Alex

LaserJet CP1525nw & WPA-enterprise

We bought a LaserJet CP1525nw printer because of its airprint support for printing from our iPads. Our wireless network uses WPA-enterprise security.
We are unable to connect the printer to the wireless due to the enterprise authentication. ipad is unable to find the printer.
We need printing from the iPads, ePrint does not offer. Any help would be much appreciated. Firmware 20110329.

Hello,
If you have not already, I might recommend going here and then looking at the link for iPad printing for ePrint/Airprint or ePrint Home and Biz. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02784317&tmp_task=useCategory&cc=us&dlc=en&lang...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Connecting n96 to WPA Enterprise

Similar Messages

Maybe you are looking for