Connecting new source system
Dear All,
Till now in the project, BW Quality System was connected to 600 Client of ECC Quality.
Now client wants to connect the BW Quality System to 606 Client of ECC Quality.
What changes need to be done to connect all the BI Objects existing in the system to other client.
I have thought of the following steps.
In Coversion of logical system names I will add this client.
And re-import all the transports again.
Or would you suggest any other way.
Let me kno if my requirement is not clear.
Cheers,
Neel.
hi Neelesh,
If Change only the client names if they belongs to same serever then the configration will be the same there might be only change in the data i think there is no necessary of re-importing the request.
If you adjust the source system thats enough.
Let me know if you have any doubts.
Regards,
Shiva.
Similar Messages
-
Hi
We are trying to connect new Source System to BW. It is ECC 5.0.
When I try to activate the Source System, it generates the following error:
<b>EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Entry in outbound table not found</b>
I checked WE20, it looks good. This is very similar to the current R/3 System (4.6). I was able to REPLICATE the DATASOURCE with no issues.
Can you please let me know, how this could be resolved.
Regards,
GPK.Hi Guru's
The OSS note mentioned was a good one. I did check that OSS to ensure we were on track. There was no loop hole i got in regards to this issue.
I cannot say why it worked for me but I could tell what I did.
1. Deleted the source system, I creted.
2. Created the Source System back again.
3. It worked, but the only difference I noted was that, the icon of the source system is like the BW and not like the r/3 icon. I don't know WHY??
Thank you all for your support and advices.
Regards,
GPK. -
BW: Connect to new source system via special transport
Hello everyone!
I have a BW system connected to an R/3 source system. I have made a copy of the source system. Now I want all my models to be connected to both source systems. I heard that this can be achieved via special transport (i.e. place all source system dependant objects into a special transport request to be imported back into my BW system, but with the new source system assignment). Does anyone have any documentation on how to do this?
Best Regards and Merry Xmas!
Luís Andrade.Hi Luis,
There are two parts,
1) If you want to transport all your objects from current R/3 system to newly created r/3 system then you can create a TR and use it in SCC4 transaction during client copy. In the same fashion you can use RSA1---> transport connection and use the TR for system copy. After that once you release this TR all the objects will move from one system to another.
2) But if you have already moved all the objects in source system but now you want them to replicate in BI then go to SAP BI system select your source system and then from the context menu choose replicate datsources option, it will fetch everything from respective source system in BI.
Regards,
Durgesh. -
Connecting MSSQL as new source system
Dear all,
We want to connect a MSSQL server as a new source system in SAP BW 7.0.
Does anybody has a good "How to..." Paper which helps to connect MSSQL step by step to SAP BW?
Thanks a lot.
Regards
DanielFollow the below mentioned steps to create a dbconnect source system.
1. Goto RSA1 -> Source systems. Right click and Create
2. Give some name and description and hit enter
3. a. Con Name : Any name (SQLSRV, etc)
b. DBMS : MSS
c. UserName : Any username which is present in the SQL Server. Eg: SA.
If you have to use Windows Authentication, there is a seperate method :
For windows authentication, you will have to add your Admin login of BI Server to the SQL Server Security logins group (For Eg: If BI Server name is BID and the admin login for this server is BIDADM, you need to add BIDADM to Logins/Users group of SQL Server and also for the specific database).
d. Password : Anything.
e. Con Env : MSSQL_SERVER=<sql server name> MSSQL_DBNAME=<database name> OBJECT_SOURCE= DBO.
For Example:
MSSQL_SERVER=ps14apollo MSSQL_DBNAME=PROJECTSERVER_REPORTING OBJECT_SOURCE=DBO
Here ps14apollo is my SQL Server name. Similarly ProjectServer_Reporting is my database name. DBO should be the Object_Source for most of the SQL Server dbs. I think it should work in your case as well.
f. DB RECO = select or let it remain unselected.
g & h Max Connections & OPT Connections = 0, for unlimited connections.
Regards,
F-S -
About creating a new source system on BW pointing to an Oracle database
hi friends
i m facing problems when i
creating a new source system on BW in AIX pointing to an Oracle database, our bw oracle use 10idatabase ,and we want to connet to 9idatabase(Windows) to get data for BW
(1.) in /oracle/P01/102_64/network/admin tnsnames.ora I hava add
SJPT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 68.16.211.177)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = SJPT)
(2) and in etc/hosts I hava add
68.16.211.177 SJPT
(3) in p01adm> tnsping SJPT it is OK
(4)but when i
in BW RSA1 DATA SOURCE
create db connect:
DBMS: ORA
USER NAME: SAP
DB PASSWORD: SAP
[email protected]
i t give me the error message :
ORA-12154: TNS:could not resolve the connect identifier
please help meHI,my trans.log file is
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 13.11.2007 - 10:16:48
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Nov 13 10:16:48 2007 81 0.000081
4 ETW000 [dev trc ,00000] db_con_init called 29 0.000110
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 50 0.000160
4 ETW000 [dev trc ,00000] Loading DB library '/usr/sap/P01/SYS/exe/run/dboraslib.o' ...
4 ETW000 43 0.000203
4 ETW000 [dev trc ,00000] load shared library (/usr/sap/P01/SYS/exe/run/dboraslib.o), hdl 0
4 ETW000 13346 0.013549
4 ETW000 [dev trc ,00000] Library '/usr/sap/P01/SYS/exe/run/dboraslib.o' loaded
4 ETW000 32 0.013581
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 35 0.013616
4 ETW000 [dev trc ,00000] Version of '/usr/sap/P01/SYS/exe/run/dboraslib.o' is "700.08", patchlevel (0.46)
4 ETW000 53 0.013669
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 34 0.013703
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library /usr/sap/P01/SYS/exe/run/dboraslib.o
4 ETW000 53 0.013756
4 ETW000 [dev trc ,00000] New connection 0 created 23 0.013779
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.013818
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 45 0.013863
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 32 0.013895
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 37 0.013932
4 ETW000 [dev trc ,00000] Got LIBPATH=/usr/lib:/lib:/usr/sap/P01/SYS/exe/run:/oracle/P01/102_64/lib from environment
4 ETW000 325 0.014257
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 47 0.014304
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 3234 0.017538
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 28 0.017566
4 ETW000 [dev trc ,00000] Connecting as /@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 34 0.017600
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 35 0.017635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000 36 0.017671
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 37 0.017708
4 ETW000 [dev trc ,00000] Allocating server context handle 24 0.017732
4 ETW000 [dev trc ,00000] Attaching to DB Server P01 (con_hdl=0,svchp=0x110f94398,svrhp=0x110fa6158)
4 ETW000 72 0.017804
4 ETW000 [dev trc ,00000] Assigning server context 0x110fa6158 to service context 0x110f94398
4 ETW000 36191 0.053995
4 ETW000 [dev trc ,00000] Allocating user session handle 73 0.054068
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000 43 0.054111
4 ETW000 [dev trc ,00000] Assigning user session 0x110f937a0 to service context 0x110f94398
4 ETW000 10613 0.064724
4 ETW000 [dev trc ,00000] Now '/@P01' is connected (con_hdl 0, nls_hdl 0).
4 ETW000 964 0.065688
4 ETW000 [dbsloci. ,00000] *** ERROR => ORA-942 when accessing table SAPUSER
4 ETW000 1183 0.066871
4 ETW000 [dev trc ,00000] Disconnecting from connection 0 ... 73 0.066944
4 ETW000 [dev trc ,00000] Rolling back transaction ... 28 0.066972
4 ETW000 [dev trc ,00000] Closing user session (con_hdl=0,svchp=0x110f94398,usrhp=0x110f937a0)
4 ETW000 146 0.067118
4 ETW000 [dev trc ,00000] Now I'm disconnected from ORACLE 409 0.067527
4 ETW000 [dev trc ,00000] Try to connect with default password 23 0.067550
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@P01 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 34 0.067584
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 36 0.067620
4 ETW000 [dev trc ,00000] 0 UTF8 1 0x110f8b9c0 0x110fa3e38 0x110fa36e8
4 ETW000 36 0.067656
4 ETW000 [dev trc ,00000] Assigning username to user session 0x110f937a0 22 0.067678
4 ETW000 [dev trc ,00000] Assigning password to user session 0x110f937a0 41 0.067719
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=0x110f94398,srvhp=0x110fa6158,usrhp=0x110f937a0)
4 ETW000 37 0.067756
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1017
4 ETW000 33690 0.101446
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1017'
4 ETW000 36 0.101482
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1017 performing CON [dblink#3 @ 431]
4 ETW000 122 0.101604
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01017: invalid username/password; logon denied [dblink#3 @ 431]
4 ETW000 34 0.101638
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'P01'" -
RFC connection to source system is damaged , no Metadata uploaded
Hello Friends,
I need your help to understand and rectify why my transport is failing again and again.
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata upload
Environment - Production Support (Dev - Quality - Testing - Production)
Alive scenario - Need to create two InfoObject and incorporate the fields in to data targets and reports.
What we have did?
1st request - We have created new request and captured two Infoobjects in to the request.
2nd Request - We have captured the replicated Datasource along with that the below sequence displayed by default in the same package.
Communication structure
DataSource Replica
Transfer Rules
InfoSource transaction data
Transfer structure
3rd Request - we have captured DSO and Cube only in this request.
4th Request - Captured 2 update rules (ODS) Update Rule (Cube)
The above 3rd request failed in the testing system (successful in Quality System) and ODS is inactive in the Testing system.
Testing system Error Message:
The creation of the export DataSource failed
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
RFC connection to source system BT1CLNT200 is damaged ==> no Metadata uploa
Error when creating the export DataSource and dependent Objects
Error when activating ODS Object ZEOINV09
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/AZEOINV0900)
Table /BIC/AZEOINV0900 could not be activated
Return code..............: 8
Following tables must be converted
DDIC Object TABL /BIC/AZEOINV0900 has not been activated
Error when resetting ODS Object ZEOINV09 to the active version
So we have captured the data mart Datasource and created a new( 5th ) request (transported only 5th request )and transported in the below sequence
Communication structure
Datasource Replica
Transfer Rules
Infosource transaction data
Transfer structure
development to Quality - Successfully
Failed in testing system again.
How to rectify this error, please help us
Thanks,
Nithi.Hello All,
*Question -1*
I have checked the connections and typed the steps below - what i have seen in the screen.
Steps :
R/3 Connection - I have double clicked on the BT1CLNTXXX and tested the connections.
Connection Type :
Logon - 0KB , 10 KB , 20KB, 30 KB
R/3 connection:
5 msec, 0msec, 1msec,1msec,1msec
Please let me know whether RFC connection is OK or not.
Question - 2
I want to know is there is any option to check before transporting the TR from Developement to Quality - "Preview Check " the sequence , so that we can avoid the Transport failure because of TR sequence.
Regards,
Nithi. -
Migrate Dataservices source system to new source system type in BW 7.3
Hi All,
We have upgraded our BW system to 7.3. In our old 7.0 environment we have linked Data Services 4.0 as an external source system. Now in BW7.3 we would like to migrate the developments on the old source system to the new source system type.
Does anyone know if there is any migration tool which we can use for this?
Best regards,
F. GeldofHi Valerie,
Unfortunately i didn't find the answer yet. For the moment we have kept the old connection types to our DS environment.
Good luck!
Best regards,
F. Geldof -
Connection between Source Systems and BW
Hello,
I´m trying to connect our SAP BI 7.0 system to SAP R/3.
At the following link, the topics for connecting BW with SAP source systems aren´t mentioned in detail:
http://help.sap.com/saphelp_dm40/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
I already have setup and tested the RFC-connections, so I primarly need a step by step description for the ALE settings (Partner profiles,Port, IDoc types,IDoc segments) in the
context of BW-SAP R/3 connectivity.
Thank you for your postings
Best regards
MehmetHi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet -
New Source System Client for BW
Hi All,
Currently we have R/3 QAS Clint 102 connected to BW QAS. We want to get rid of this Client 102 and connect a new QAS Client 100 (same server but different Client) to BW QAS. I created a new Source System (QAS100) in BW QAS and did a restore.
My question: How do I get all the Source system dependent Objects like InfoSurces, InfoPackages etc for the new Client 100 in BW QAS? Please help me and I promse to generously reward points.
Thanks, very much in advance.
SriniHi A.H.P,
I am pretty sure this will resolve the issue. I will come back again and reward 10 points once we apply a working solution.
Thank you for a quick reply.
Srini -
Hello,
Our requirement is to load data from a different R3 client to which we dont have a connection yet.
The idea is to create a new connection but keep the existing one.
Is there any automated tool to do this? We would like to avoid the manual creation of all infosources and transformations from the new source system, but to copy them from the existing one.
We found that there is a tool for replacing the current source system with another one (BDLS), but we just want to create this new one in paralel with the current source.
Thanks!!
PabloHi,
what you can do is, create a transport request containing all source system related things like the infosource/datasource assignment, transfer rules... and import that transport back into your dev system. Before the import you should maintain the settings for source system after transport accordingly.
Siggi -
Could not make connection to source system
Hello Experts,
I am trying to fetch data based on selection for last month in info-package but when I try to enter selection (pull down button), I get error message - "Could not make connection to source system..."
Any idea why this message?
I have already checked connection to ECC - is fine.
Datasource is replicated.
Also if I try to run info-package without selection - I am getting yellow status, No data fetched. RSA3 shows many rows but Info-package to data (Full extraction.)
Regards,
SMSrini/Vikram,
user credential is good. sm59 connection is good. there is data in selection as RSA3 fetches rows in ecc.
when I run any info-package - I am getting yellow status? No data while rsa3 indicate data for Full update?
why so?
I am more of design person, not much into hands-on - so seeing these error for first time.
Q1) if a package is already schedule - let us sat thru data source 2lis_11_vaitm. Now I want to go back and retrieve last month data already extracted... once again. I should be able to pull this data in new infopackage using Full update - data selection option.
Q2) - rsa3 should fetch data based on set-up tables, so any infopackage based on Full update mode - should fetch data - independent of any other infopackage.
q3) we need to do delete and fill-set-up table - only if extract structure is changed? right?
regards, sm -
How to transfer all the transfer structure to new source system ?
Hello
I have created a new source system on my BW system with new RFC connection .
I want to replace all my old transfer structure with old source system to this new system .
can u plz let me know how can i do this ?
Regards,can u plz many help in this ?
-
Hi All,
I am trying to create a new source system in BW for the new R/3 client which is a copy of PRD.
So now new R/3 client is 200 and also PRD is 200. I did all necessary steps and i found difficulty when i am assigning logical system based on client. I found key is only client, so as PRD system is already mentioned with client 200 i am not able to create new entries and i hope this causing me error.
So by creating RFC destination directly in SM59 and when i tried to create it says PRD Client already available. Though i have specified new client server name.
Kindly advise.
This is quite urgent.
Thank You.
Best regards,
Bhuvana.hi,
it seems rfc connection between bw and r/3 not established properly, check with transaction sm59 (ask basis help if no authorization), choose r/3 source system rfc and menu test->authorization. check if user name and password, hostname/ip address are correct.
this doc 'bw r/3 connectivity' may useful http://help.sap.com/bp_biv235/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
hope this helps. -
Steps for creating new source system
Hi guys
We are on BI 7 and ECC 6 now...We are planning to get the data from other source systems (R/3 4.6)which are existed in different place.
Now my question is what are the steps to get the data from this new Source system and whats BI developer role for this...
Example: Inorder to establish the connection between BI and R/3 we need an RFC connection (Is this done by BASIS / BI )? If its BI , then what do I need to ask for ?
afterthat what are all the questions or points that I need to raise to the folks in the meeting...
Please advice
regardsHi
refer to this link below
http://help.sap.com/saphelp_nw04s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Exactly this will be taken up by BASIS team so that at any time if we have any issues with RFCs like RFC connection failure we will not get any data to our targets.
Then we have to raise ticket to basis stating this failure -
Change Default Background User In BW When Creating New Source System
Hi all,
I would like to create a new Source System in RSA1.
In Source Systems > SAP > Create > Connection of source system to BW
the Default background user in BW is u201CALEREMOTEu201D.
How do I change this to another user?Just want to say thank you. I could fix a problem with your information.
I was searching to change the background user from ALEREMOTE to BWREMOTE as all our process chains were running on ALEREMOTE.
Maybe you are looking for
-
I've got my Forms and Reports talking to each other as portlets on the same page. I have another scenario partially working where I would also like get a portal page with a report portlet call a form component in a new window (by clicking on the reco
-
How can I get my files back in their proper folders in Windows Explorer?
For over 10 years I have meticulously put my photos in folders according to month, event. So a folder is in directory labeled 2013, with I've successfully used Adobe Bridge to browse, edit, final edit in Photoshop. Now I use Lightroom and everything
-
Am I able to play blu-ray disks on this Satellite L755?
I have received a driver Alert which should enable me to play Blu Ray disks. Downloading does not work on my L755. Am I able to play blu ray on this machine?
-
Calendar server does not start
We installed an OCS onebox 90411 on Win 2000 Server in january. Since last week calendar server does not start: D:\ocs_onebox\mtier\ocal\bin\unistart unistart: Oracle Calendar Server 9.0.4 unistart: Copyright (c) 1993, 2003, Oracle. unistart: All rig
-
Security Evaluation of Oracle Application Server
Are there any published documents on security evaluation of Oracle Application Server? Is it secure as a tool against some attacks, for example, are following vulnerabilities when applicable to the server dealt with or should be handled by applicatio