Connecting "older" pc and new iMac desktop via Airport extreme

Please bear with me...I am a Mac novice. My husband and I just purchased our first mac (iMac 20" desktop)and had it up and running in 2 minutes. We got internet access immediately through the bluetooth (whose signal it is remains a mystery). We purchased the airport extreme to access the internet via our Dell's 2 y/o cable modem (comcast Motorola Surfboard)before we realized we had a hotspot in our house. We also want to use the printer that is connected to our pc with our mac. I cannot get the airport configured at all...I keep getting error messages. The first one that appears says that my wireless interface is not enabled. I went to My Network Places and set up the wirless network using a USB flash drive. I connected it to the airport's USB connection, and then to my iMac. Neither one appeared in the list of devices detected when I reconnected the flashdrive to my pc. I've tried rebooting, disconnecting and then reconnecting both the modem and the aiport from the power supply. Should I reset the airport? Help!!
iMac 20" desktop Mac OS X (10.4.8)

We got internet access immediately through the bluetooth
(whose signal it is remains a mystery).
This is very likely to be a neighbour's wireless or Airport network (not Bluetooth).
I cannot get the
airport configured at all...I keep getting error
messages.
Don't use the PC to configure the Airport Extreme Base Station, use the iMac, it will be easier.
The first one that appears says that my
wireless interface is not enabled.
You are probably trying to use the Airport Assistant, this will only work on a wireless computer, in order to configure an Airport Extreme Base Station (AEBS) from a wired PC, you need to connect to the AEBS via the LAN port and then use the Airport Admin Utility.
Connecting a XP PC to a Airport Network via the LAN port of the AEBS
http://www.ifelix.co.uk/tech/1007.html
However still configure the AEBS via the iMac.
I went to My
Network Places and set up the wirless network using a
USB flash drive. I connected it to the airport's
USB connection, and then to my iMac. Neither one
appeared in the list of devices detected when I
reconnected the flashdrive to my pc.
That Microsoft wireless process only works with other Windows PCs, it won't work with a Mac or the AEBS.
I've tried
rebooting, disconnecting and then reconnecting both
the modem and the aiport from the power supply.
Try using the Mac to configure the Airport network using the Assistant.
Should I reset the airport?
You may need to, but sounds like you haven't managed to configure it, so it will still be in the default state.
We also want to use the printer that is
connected to our pc with our mac.
Printing to a printer on a XP PC from a Mac running 10.4.x
http://www.ifelix.co.uk/tech/3015.html

Similar Messages

Weird lost access to iMac's desktop via Airport Extreme wireless LAN

This is weird and complicated. I'll try to keep it simple.
1. Two computers on a wireless LAN via Airport Extreme: G4 Powerbook and 20" G5 iMac. The LAN has worked flawlessly and seamlessly for several years, and except for this ONE anomaly, still does.
2. When logged-in to the iMac from the Powerbook, all its files and contents show up normally in it's networked-drive window in Finder,
3. EXCEPT the desktop. And I mean the real desktop which is under my ID under USERS.
4. Searching the Powerbook from the iMac, however, works just fine and shows all of the Powerbook's contents.
Repairs of Permissions on both computers have accomplished nothing.
There is one other peculiar symptom: there was a .wmv movie file sent me by a friend, and I had a copy of it on the desktops of both computers. It sat there, showed up and ran just fine, until one day something curious happened:
The file would show up in the column-view Finder window of the iMac's desktop when I opened it from the Finder Window, but would, after about a second, disappear!
If I try to import, on the Powerbook, some random file into the iMac's Desktop folder, it appears for a brief second and then the folder once again displays as empty.
I have trashed that wmv file, and yet sometimes its name blinks up on the iMac's desktop list (that is, again, the column view display in the Finder window).
This is profoundly weird.
Oh, and there's nothing changed or weird about the SHARING settings. Personal File Sharing is enabled on both computers, as is Printer Sharing, and itunes music sharing is also enabled. All of these continue to work just fine. Firewall is enabled, but always has been.
Owen

Well, when in doubt try all the obvious things FIRST!
I rank Disk Utility from the install disk, did a disk repair, and, well, Bob's your uncle, and all is fine again. Apparently that ghost file screwed up the count of files (I'm not sure what that means, but it seems consistent with a file that would materialize and then disappear, and screw up display of a folder's contents - the folder it was lurking-in invisibly.
Very peculiar, none the less.
Owen
I'll leave this open for another day, if only to see if someone has an explanation for what may have happened, since that might be useful to others, besides satisfying my own curiosity.

Epson 820 connected to Ibook G3 and Imac G5 via Airport Extreme Base?

My Ibook G3 will not recognize the printer using the Airport Extreme Base Station. I have successfully connected the imac G5. I need to have both computers share the printer wirelessly. After loading the lastest print drivers there is still no change.
Can anybody help?
Imac G5 Mac OS X (10.3.9)

What OS is the iBook running?
iFelix

Win XP does not print via Canon MP970 via Airport Extreme

OK, I bought a Canon MP970 printer and hooked it up to the airport extreme, changed all of the ports to 10.0.1.1 on my XP, shared the printer, ran Bonjour, ran airport utility, and everything I know how to do. I can print from my Powerbook G4 and from a new black macbook that I just bought on my network. Problem is I cannot print from my windows XP PC. Very frustrating. It did work fine with my HP printer; that is print from my laptops AND my PC desktop via airport extreme. Any help would be greatly appreciated!

OK, I kept working at it and seemed to have fixed the problem. I finally just redirected the port to a local one "9101"and not the 10.0.1.1 and began working. I am not sure what I did definitively to make it work. And I just installed the latest printer drivers into my PB G4 and new blackbook and worked. I really just need to trash the PC and go with Apple but you know.......wife.....$$$$$, etc....

Cannot print from IMac or Dell Latitude Laptop on Canon MX330 printer via Airport Extreme.

Trying to connect a Canon MX330 printer to an IMac and Dell Latitude laptop via Airport extreme and having no luck.
All devices recognize the printer, but when I try to print from the IMac it says that the printer is offline, even though it is not. The printer status on the IMac says offline until I clear the printer queue and then the status goes online.
When I try to print from the Dell laptop the printer reacts, but nothing prints.
I have run through all of the troubleshooting in the support section online. Any advice?

Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at thisiFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

I purchased Photoshop Elements 12 online from Adobe and was downloaded on old Macbook laptop. Now have new iMac desktop and want Elements 12 moved to this computer. Have serial number. How do I move application from one to the other? Thanks for your h

I'd like to know how I can move Elements 12 from an old Mac laptop to a new iMac desktop.

you can migrate your catalog (Use Backup, Restore to move catalog | Organizer | Elements 6 or later), but do not move pse; properly install it using the installation files.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I have recently bought a imac and wish to transfer iphoto, imovie, and itunes files, albums, projects etc, from my macbook to my new imac desktop, to free up space on my macbook. How is this done?

I have recently bought a imac and wish to transfer iphoto, imovie, and itunes files, albums, projects etc, from my macbook to my new imac desktop, to free up space on my macbook. How is this done?

Hi,
Are Both Macs running the same OS... i.e. Snow Leopard... ?
Also These Links may be of Value:
http://www.apple.com/support/imac/intel/
http://web.me.com/pondini/AppleTips/SetupAsst.html
http://support.apple.com/manuals/#imac
Cheers,

Hi, I am going to buy a new iMac desktop. I am going for the 3.4GHz Quad-Core Intel i7, 16 GB RAM and 2TB ATA Drive. I want to know whether I should go for the dual drives option i.e including the 256 GB SSD. I do a lot of 'heavy' media work. Brian

Hi, I am going to buy a new iMac desktop. I am going for the 3.4GHz Quad-Core Intel i7, 16 GB RAM and 2TB ATA Drive. I want to know whether I should go for the dual drives option i.e including the 256 GB SSD. I do a lot of 'heavy' media work.

by looking at the specs the laptop is better but if your not a gamer or graphics designer then you most likly wont notice a difference in the performance at all so with that said a few downsides
the processor is i5 the i7 processor is the better processor the graphics card has half the dedicated memory that the laptop has and the hdd compared to the solid state is not much of a difference unless you wanna move your computer all the time you wont need a solid state drive
but like i said before if your not a gamer or graphics designer on your computer you will not notice the difference most likely

I bought a new iMac desktop and need to install the Photoshop CC

I bought a new iMac desktop computer and want to install the PS CC and Lightroom package I bought a few months ago, which is currently on my other Macbook Pro. Does anyone know how to help?? ta

Wilmack please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install the Adobe Creative applications included with your membership.

Connect Mac Mini 2011 to iMac 2011 via Thunderbolt

Is it possible to connect the new Mac mini 2011 to the new iMac 2011 via Thunderbolt to use the Display Target Mode of the iMac ?

See Target Display Mode And Thunderbolt.

For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme. Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet. More recently, I added an iMac and iPhone. PROBLEMS: A few months ago the Mac mini lost its connection to the printer, and now it cannot locate the network at all.

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

Migrate from minimac (G4) to new iMac via airport extreme

I have a brand new iMac and I have the latest airport extreme.
I have my old miniMac and all are linked up through the Airport Extreme.
I want to transfer all of my old files from my G4 miniMac to my new iMac but the Migration Assistant says I have to use (buy) a firewire cable.
How do I transfer my files from my old computer (miniMac) to the new iMac via airport extreme?

sorry to say but its the firewire technique which Migration Asst. uses. It does not migrate over Ethernet.. its actually very simple...
you put your G4 into target disk mode. You put the iMac into migration asst., attach the cable and the migration (file copying) begins after you chose to proceed.
The reality is firewire is faster than most standard ethernet anyway... and wireless? it would take an extraordinary amount of time.
Will
Message was edited by: Willard Kramer

Digital Video Recorder with Firewire 400 and new iMac

I just got a new iMac which has only 1 firewire800 and no firewire 400 ports. My digital video camcorder has a firewire 400 cable to transfer taped recordings to the computer (I want to import using iMovie 09). So, do I simply need to buy a new firewire 800 cable that will plug into my digital camcorder? The reason I'm hesitant is that I've tried using a USB connection, and iMovie 09 didn't open and doesn't recognize that the digital camcorder is connected when I use USB. Does iMovie 09 just no longer recognize my several year old Samsung digital camcorder, or does it just not recognize it with a USB connection, and it will be fine if I get a firewire 800 connection that fits the new iMac? Is there another type of converter--e.g., a cable that allows a firewire 400 to plug in on one end and has the firewire 800 connection on the other end?
Thanks

Thanks for the reply. I went ahead and got a new cable and now I can plug for digital video camcorder into my new Mac. Unfortunately, as I feared, the Mac still doesn't recognize the camcorder. I checked the system profiler with the camcorder plugged in, and under Firewire Bus it reads Unknown Device:
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
Unknown Device:
Manufacturer: 0xF0
Model: Unknown
GUID: 0xF000FFFFFFFF
Maximum Speed: Up to 400 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
Unknown Unit:
Unit Software Version: 0x10001
Unit Spec ID: 0xA02D
Am I just out of luck--the new mac just doesn't recognize my slightly out of date digital video recorder? Or should I be able to get a driver to make it work?

Attempting to connect a Nook HD to iMac desktop.

Attempting to connect a Nook HD to iMac desktop. OS X 10.5.8; per information I have looked at, the device should be recognized by iMac. Connecting via USB cable. However, Nook is not seen by IMac. Suggestions to remedy this.

Take a look at this link, http://bookclubs.barnesandnoble.com/t5/The-Old-eBooks-Help-Board/Connecting-nook -to-a-Mac/td-p/437413

I have an Epson RX520 printer if I connect it to my new iMac will it work or will I have to buy ANOTHER app??

I have an Epson RX520 printer if I connect it to My new iMac will it work or will I have to buy ANOTHER app.??

Try it and see, if you need more info before you start try googling this phrase;
Epson RX520 Mac Software,
which if done right will take you to this page Where you will find OSX sotware for your Epson.

Connecting "older" pc and new iMac desktop via Airport extreme

Similar Messages

Maybe you are looking for