Connecting over a network address

I have just purchased a copy of apple remote desktop version 3 as I am going away to university week after next and need to be able to access my home computer to help my parents with any problems that they have. The problem is, I can access their computer (intel imac) from my laptop (mbp) while on my home network but when I go to my aunts house to try and connect it doesn't work.
I know that I have to use the network address of the internet to login but that doesn't seem to work either.
My public internet IP is: 83.xx.xx.xxx and then the imac is connected to a router with ip 192.168.1.71 .
Can anyone please tell me what to type into remote desktop to connect to this computer.
Many thanks.

Here is a tutorial.
I'm tired of hearing the same freakin' questions.
http://www.starkpr.com/ard.htm
I welcome any comments to make this tutorial more user-friendly.
Thanks,
Kevin Nichols
[email protected]

Similar Messages

HP photosmart C4700 cannot be connected over the network.

my printer was recently unplugged and refuses to print. i have reinstalled all drivers and software but still cannot connect over the network. please help soon as i desperatley need to print off college work. this has happened before but reinstalling the drivers worked.

Hi..
try this one....
Uninstall any remaining Hp printer program from your system..
1. Click windows logo or start button- on the search box or run - type in %temp%, press enter
2. look for the 7z folder on the TEmp folders.
3. Open &z folder and look for util- open util look for ccc folder- open ccc folder loofk for uninstall3.
4. Procedd to Uninstall level 3- restart the computer -go back to %temP% trhen delete tye 1st 7z folder-- to the same process for the remaining 7z folders- open util-ccc-uninstallL3- restart Pc and delete te 7z folder
5. Once your'e done- go to add or remove programs or programs and features to uninstall remaining Hp printer software.. then restart you pc again..
Follow these steps before re-installing the printer:
Click Start , and then click Run . The Run dialog box opens.
In the Run dialog box, type msconfig , and then press Enter .
If the User Account Control window opens with the message 'Windows needs your permission to continue ,' click Continue to close the window.
In the System Configuration window, click the Startup tab, and then click Disable All .
Click the Services tab, click the Hide all Microsoft services checkbox, and then click Disable All .
Click Apply , and then click OK .
When prompted to restart the computer, click Restart later .
Restart the network devicesFollow these steps to restart all the devices on the network.
These steps include turning off the computer. Consider bookmarking this page for ease of reference.
Press the Power button to turn off the product.
Click Star, click Shut Down , and then click Shut Down from the drop-down list.
Turn on the wireless access point (router).
Press the Power button to turn on the product.
Press the power button on the computer to turn it on.
When the computer turns on, a System Configuration Utility message opens on the computer. Select the Do not show this message again check box, and then click OK .
proceed to the installation.......then prove functionality...if successful continue these steps
Re-enable startup programs and services
Click Start ( ), and then click Run . The Run dialog box opens.
In the Run dialog box, type msconfig , and then press Enter .
If the User Account Control window opens with the message 'Windows needs your permission to continue ,' click Continue to close the window.
In the System Configuration window, click the Startup tab, and then select the check box next to each program that should run when you turn on the computer. If a program should not run when the computer is turned on, leave the check box clear.
CAUTION:Do not disable any Microsoft services.
If no changes should be made to startup programs or services, click the General tab, and then select the Normal Startup checkbox.
Click Apply , and then click OK .
When prompted to restart the computer, click Restart .
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

DMM - DMP connectivity over DSL network

Dear All,
I would like to know whether it is possible to connect DMM - DMP over DSL Network.
- I have DMM with private IP 192.168.1.100 have static net public IP 58.177.200.xx
- I have DMP with private IP 192.168.xx.xx connect under ADSL network with Dynamic IP address.
I check NAT enable on DMPDM but It ask me to enter ADSL public IP. When DSL line down and reconnect IP is change.
What Should I do?
Thank you very much
Sukitti

Hi Sukitti,
I'm afraid this will never work. As you already saw, you can use the DMP with NAT, but the public IP needs to be fixed.
Your best approach would be to contact your ADSL service provider and request a fixed IP for that connection. Most of providers give this option for a small extra amount
Regards
Daniel

Wireless PC wont connect---wont acquire network address

Your Network Magic Version installed: 5.5.5195
The type of connection to the Internet : ADSL2
The Brand of Modem and its Model Number the router is connected to.Linksys ADSL WAG120N
The Method of connection your problem computer has to the Router: Wireless.
The Connection in use on the problem computer: TP-Link TL-WN350GD
Operating system and version and Service Pack Level, XP Service pack 3
Software Firewall in use: windows
Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. Iobit Security and Avast
I have a problem, ever since I had to do a hard reset of my pc. It works on wireless and the signal is strong. But it cannot acquire the network address from the router no matter what I do.
Can anyone help ?

Firstly, you must know your router's wireless settings. click on these links to learn how:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=3698
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=22046
After getting your router's wireless settings, get your Kindle and follow the steps on this link:
http://askville.amazon.com/Kindle-connect-wireless-router-passwords-work-Help/AnswerViewer.do?reques...

IPhone 6 prioritizes poor 4G Connection over strong network extender 3G signal

I use the network extender due to poor coverage in my basement. I have spent multiple hours with both Verizon and Apple trying to figure out why sometimes my iPhone 6 won't connect to it, including a hard reset of the iPhone. I finally figure out that the iPhone 6 prioritizes getting a 4g connection, not matter how poor, over a 3g connection, no matter how strong. As a result, my phone will occasionally latch on to a weak 4g signal and not connect to the Network Extender. When I then get or make a call, the connection and voice quality is terrible. The only work around is to completely turn off LTE. This forces connection to the 3G Network Extender. Of course, I then forget to turn it back on when I leave the house. Are there any plans to provide some sort of a fix or a setting to make this more convenient?

PROBLEM SOLVED (so far). My wifes iphone 6 plus had the exact same issue. . .would keep going back to the weak 4G signal over the network extender.
To fix it, go into SETTINGS>CELLULAR>Enable LTE and set to DATA ONLY. . .NOT Voice and Data.
So far so good. . .only affects being able to make calls and surf the web at the same time, so if you don't do that much then you're not going to be inconvenienced too badly.
Hope it works for you! Also, if the iPhone 6plus is like my Note3, then it has 2 antennas, 1 that's hooked into 4G and the other one that's connected to the network extender. . .it defaults to the 4G signal, so it may only show minimal bars till you actual make or receive a phone call then it'll jump to the network extender signal strength.
Good luck!

Hp 1320n will not connect over the network

Hi,
I'm trying to get my macbook pro to with 10.6.8 to connect to my HP 1320n printer through the network. It works fine when I have it connected directly via USB. I'm trying to get it to work through the network. I have the printer connected to the router and My macbook pro is using wireless. It can detect it with bonjour but when I try to to print it says trying to connect then can't. I tried setting it up with the IP address that the printer has but it can't connect to it either. I got the printer address by pressing the green button on the back of it. Also is there anyway to reset the printer? it has an old host name which I can;t figure out how to change. I tried holding the green button in the back for 3 sec. I also tried turning it off and then back on while holding the green 'GO' button on the top, both failed to reset anything.
ultimatily I'm trying to get my two 1320n printers work work with my 2 computers in the office. My other is an imac with the latest version of software.
Any help is appreciated.

try making certain that you have the latest drivers installed, which you can caget fron HP. After downloading do to system prefs>>print/fax. hightlight the HO1320n (use the - key). then use the add 9+) key ang select the HP1320n icon to add the nem printer. Set the HP as your your default printer. When you go to print for the first time, make sure that the selected printed is the the HP1320. It should go. Sometimes it need to be re-created when there are multiples.
Good luck and hope this helps

Wireless printing connection over large network

I have computer in a large apt. complex which comes with Wifi, and a single password for everyone in the building. I have a Wireless HP Printer and a Mac OSX.6 . I want to be able to wirelessly connect the printer to my Mac, but the printer wont accept the password because so many other computers are also on the same network. (20 to be exact).
How does the setup work so this can be done?
Thank you in advance

Hi,
In this environment, the safetest and quickest way for one computer: use USB cable. For more than one computer, using a separate home network will help.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Timemachine only connects over wired network

Hi
I have an iBook G4 running 10.5.8. Recently I purchased a NAS box (Buffalo Linkstation) with the intention of using Time Machine to back up my ibook. After a bit of fiddling around with setup everything was working fine, for about a month. Now Time Machine can no longer see the sparsebundle image on my NAS box even though I can mount the volume via AFP and Samba. As far as I know I haven't changed any configuration settings on either the NAS, the iBook or my wireless router.
I was all ready to blame the NAS and send it back, then I noticed a curious thing. If I connect my iBook to wired ethernet everything works fine again, Time Machine can see the volume, connect and backup no problems. Disconnect ethernet and turn on Airport, nothing works again. I don't think it is the quality of wi-fi connection as I have run some network quality tests and it is comparable to wired ethernet.
I am at a complete loss, does anybody have any ideas please? Any technical information on the mechanisms Time Machine uses to scan for backup volumes might also be useful?
Thanks in advance

MacMonsterUk wrote:
I got Time Machine to work with the NAS volume by changing the following command line setting.
"defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1"
As that command makes clear, Time Machine does not work well, if at all, with most network drives. See this Apple article: Disks that can be used with Time Machine.
Use this at your own risk: First, since it is *unsupported by Apple,* there's nowhere to go when there's trouble.
Second, you're risking a future update preventing it from working, and perhaps rendering your backups useless.
From a post in another forum (found by V.K.):
The technical reason why Apple limits Time Machine to 10.5 AFP volumes appears to be to prevent disk image corruption. There were additional features added to AFP in 10.5 to support Time Machine. These presumably allow the disk image engine to force disk image journal data to write out all the way to the disk. Without such features, a network interruption can result in a corrupted filesystem on the disk image despite journaling. Remember, journaling relies on the journal being written all the way to disk before the changes take place. If you can't guarantee that (e.g., because of network/NAS buffering) then the journal is useless. Time Machine appears to rely heavily on disk journaling to deal with network drop-outs, interrupted backups, and the like. Take this away and your data is at risk.
If the NAS you are using supports these features it should report them to the OS and you should natively be able to choose that volume. If you have to trick the OS to use the volume it means the NAS does not support it.
Since you had to use that command to get it to work, most likely you will not be able to do a full system restore from those backups.
To summarize: if you care about your backup data you should avoid using non-natively supported AFP servers.
That post obviously applies to Leopard; Snow Leopard appears to have added some requirements, that are also not supported by many NAS devices: some that were working with Leopard no longer work with Snow Leopard.
Since you had to use that command to get it to work, most likely you will not be able to do a full system restore from those backups (per #14 of the Frequently Asked Questions *User Tip,* also at the top of this forum).

Blend maintaining connection over mobile network

Hi there,
I've been using BB Blend (on a Lenovo laptop) by connecting my BB Z10 via an USB cable (no Wi-Fi).
Only today, BB Blend has remained connected to my handset even after I disconnect the cable. On the handset I get the message that Blend has switched to a mobile network connection ansd so it remains connected to my BB Z10.
Now, my questions are:
How and to which network does Blend on the Lenovo laptop connect? (even if it is the handset's network, how does the laptop connect?)
Is this something I should be concerned about - in terms of security?
Thanks everybody.

Hello,
When you disconnect the USB cable, the "hard line" connection between the device and the computer is of course severed. If they are both on the same "local" (e.g., no carrier data network involved) network (either WiFi or hybrid wired and WiFi), the two can communicate with each other that way. If you have set the configuration on the device to allow it to continue to be connected to the computer when the BB has moved off of all WiFi and is solely on your carrier data network, then the two will continue to communicate via that means.
In that last configuration, your BB is communicating to your PC via the wired (or WiFi) network on which your laptop is located, and the BB is communicating via the carrier data network. Those two are then in turn connected via the Internet.
This is a setting you control, on the device. If you do not want this communication happening when the BB moves solely to the carrier data network, then simply shut the setting off on your device.
Hope that helps!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Cannot connect over same network

Imac (Lion), macbook air (mtn lion), same network, different email addresses. I send a face time message from the imac to the mac book air and both ring but there is no option to open the face time message on the receiving device. Face Time is working with devices off of this network. Thanks very much for your assistance.

Please see the following post
http://discussions.apple.com/thread.jspa?threadID=250220&tstart=30
You can see that there are many ways to do this but my suggestion is:-
1. Syc your iPod with your iTunes with the PC
2. Download the 3rd party software called "iPodRip"
3. Using iPodRip to copy the music from your iPod to your iTunes with your Mac.

Re: Wireless PC wont connect---wont acquire network address

Hello
Iam trying to connect my kindle fire to my wireless but can not connect.
Can you help please?
Thank You Vicki

Firstly, you must know your router's wireless settings. click on these links to learn how:
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=3698
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=22046
After getting your router's wireless settings, get your Kindle and follow the steps on this link:
http://askville.amazon.com/Kindle-connect-wireless-router-passwords-work-Help/AnswerViewer.do?reques...

Lost Airport signal drops connection over whole network!

Hi-
I have a G5 1.5 GHz tower (I think that's the right speed), running OS 10.4 and connecting to our cable line via Airport Extreme to our router. We also have a PC that is hardwired to the router. I was having trouble for a while with my connection dropping if the computer went to sleep, but that seems to have been fixed. In its place, though, is a worse problem- almost daily, I lose my signal, and it will knock our entire connection offline so that we have to unplug the whole setup in order to reconnect. It seems like this happens with high-traffic or graphic-intensive sites.
Do you think switching the channel will help in this case, or is there something else I should try? Please let me know if you need more information.
Thanks!
-T
G5 1.5 GHz (?) Mac OS X (10.4.6) 1GB RAM, Airport Extreme, Super Drive

tcano, Welcome to the discussion area!
Changing the channel is free, quick, easy, painless, etc. so it is certainly something to try.

Build iTunes 7.7.1 Library over a network connection?

Using the OPT-open iTunes to get it to ask for an iTunes Library, I connected my 2 Macs together using Connect to Server, and chose the iTunes Library on my Server Mac.
All the Artwork showes up in my Servee Mac, but, after also Connect tp Server for the partition containing the Song files, I get a very choppy Playback ... and I cannot stop iTunes ... which isn't really working: the Progress bar makes no Progress.
Is it possible to connect over a Network , and build the Livrary locally ... thereby having the Album Artwork and Shared files, without Sharing the files the other usual way of Looking for Shared Libraries(where Artwork isn't available)?

I've been unable to launch itunes (7.6.2) ever since the latest updates. Actually, I could launch in a library-less test account, and once after deleting my entire preference (although upon the next restart I had the same problem).
What is iwow?

MySQL over a network?

Hi, just wanted to check something:
My server if on a network with another machine. If I want to connect from that other machine to my server, can I do the following (assuming my server is called COMP1)?
jdbc:mysql://COMP1//companydb
What I'm asking, can i connect over a network rather than having to use IP adresses?
Cheers
Stu

Yes, you can connect from one machine to MySQL running on another.
Here's what the URL string should look like:
jdbc:mysql://[host][,failoverhost...][:port]/[database][?propertyName1][=propertyValue1][&propertyName2][=propertyValue2]...
according to these docs:
http://www.mysql.com/documentation/connector-j/index.html#id2801041
"...What I'm asking, can i connect over a network rather than having to use IP adresses?..."
I'm not sure I understand this question. You can use either the IP address or the name of the machine if you know it. If you can ping the machine, JDBC can connect to it. - MOD

Server cannot be connected over ssl

Installed self-signed certificate on the Messaging Server. And started up the messaing server with ssl.
"netstat " shows port 993 is idle. But seems cannot connect to it .
The messaing server was running on a standalone machine, not network connective.
Does ssl require connections over the network?
Thanks!

Installed self-signed certificate on the Messaging
Server. And started up the messaing server with ssl."started the messaging serve with ssl". Means what?
Did you make the configutil settings to turn any of the ssl functions on?
Did you edit the sslpassword.conf file to add the password for the certificate database?
Did you make a typo? The default name of the cert is "Server-Cert". "server-cert" is not the same, as it's case sensitive.
Did you examine any of the logs and see errors on the restart?
I don't even know what version Messaging you're running. Frankly, you've a whole bunch of homework to do before I can be much help.
jay
>
>
"netstat " shows port 993 is idle. But seems cannot
connect to it .
The messaing server was running on a standalone
machine, not network connective.
Does ssl require connections over the network?
Thanks!

Connecting over a network address

Similar Messages

Maybe you are looking for