Connecting PC to VIN airport extreme base station

I've got a VIN airport extreme base station connected to a Netgear modem router and I'm trying to connect my PC wirelessly to the internet. I can see the Airport wireless network connection and the password is verified. The left hand light on the Airport xtarts to flash when I click to connect but after 30 seconds or so of trying Windows is "unable to connect to the Airport"??? (Another Mac seems to connect fine but the two PCs in the house don't!)

I do not know anything about the 2701hg-b but here is the AT&T link. http://store.att.com/Catalog/ProductDetails.asp?ProductId=1000-401047-000&Catego ryId=catMRG AT&T says it is a DSL Gateway with WI-FI capabilities. This is how my house is setup. Cox internet - Arris cable/modem (TM502G) - AEBS (1st gen) - 17" Macbook Pro and 17" Powerbook. Now my sister moved in with me with an eMachines T3414 desktop PC and the AT&T 2701HG-B DSL Gateway. This is a an old & crappy PC and she knows it but given her circumstances this is what she has to use. I can not get her computer to even see my network or anyone else's in the neighborhood (at any given time I can see up to 7 networks on my 2 laptops.) When she had her house and I was visiting I never had any problems connecting to her network. I do not have a lot of networking experience especially on the PC side and could use some help.

Similar Messages

Connecting to hotspot from airport extreme base station

I have a macbook and a Dell Inspiron connected to an airport extreme base station (with an antenna located on the mast) which is located on my sailboat. How do I set up the AEBS to connect to Wifi Hotspots so that I can access and print through the AEBS?
Thanks for any help

martinique, Welcome to the discussion area!
It won't work. The AEBS will only join a wireless network if you use WDS and configure the AEBS as a remote or relay station. Unfortunately:
only a very few (less than 7) 3rd party manufacturers support Apple's WDS
to make WDS work, you need to configure the main base station (the one sending the signal) to allow the remote station to connect

Intermittent connection between iBook and Airport Extreme Base Station

I have a friend with an iBook set up with the Airport Extreme system, they also have a Denon stereo that it is playing through. However, when the music is playing, it keeps cutting out every 5-10 seconds and is intermittent. On other occasions, when the router & base station is left switched on, it plays fine. Does anyone have a reason for this intermittent playing, and a possible solution? Many thanks,

Check out this Apple article to see if it will help.

Power Mac G3 Pismo with Airport wireless card in Mac OS X 10.4 won't connect to wireless network with newest Airport Extreme Base Station set at WPA Personal/WPA 2 Personal encryption.

My Power Book G3 Pismo with an Airport wireless card running Mac OS X 10.4.11 will not connect to my new Airport
Extreme Base Station using WPA Personal/WPA 2 Person encryption. The Airport firmware is version 9.52. From
posts I've read online at different places indicates the Airport card should support the WPA encryption. Perhaps the problem
is the Base Station is using a combination setting and the fault is in the base station?
Thanks for any suggestions

Perhaps an inexpensive usb wireless adapter would work as well?
This is probably the simplest way to get the G3 connected to the wireless network.
I'll have to read up on getting an express and using it as a wireless bridge as I am unfamiliar with the concept.
The new AirPort Extreme is broadcasting a wireless signal.
A new AirPort Express could be located close to the G3. The Express will pick up the wireless signal from the AirPort Extreme, then provide an Ethernet connection to the G3 though a short Ethernet cable.
This can work very well......IF.....you keep the G3 at a fixed location, since it will always be connected to the AriPort Express using an Ethernet cable.
I do have an old Linksys Wireless G router. I wonder if that would work?
In theory, yes. But it would have to use much older WEP "security", which is easily cracked in minutes using free tools available on the Internet. So, anyone who really wanted to get on the network could do so. It's an option, but not a very good one.

New Mac and Airport Extreme Base Station User - Setup question

Good Morning,
I just received my new MacBook Pro yesterday along with the Airport Extreme Base Station. I was tying to setup the airport extreme but have had no luck. I want to make sure I'm connecting things correctly - make sure I'm not doing something stupid.
I have a cable modem and I previously had a Netgear router. The connection from the cable modem that had previously been connected to my Netgear router - I disconnected it and connected it to the Airport extreme base station instead. And then I plugged it in. Is that all the connecting that I need to do? I get the flashing amber light.
Now I did read a few other threads and it sounds like I may need to install the Airport Utility that came with the base station. So I'll try that when I get home tonight. But I would appreciate any other suggestions - especially whether or not I've connected the airport extreme correctly to my cable modem.
Thanks, Susan
MacBook Pro Mac OS X (10.4)

I want to make sure I'm connecting things correctly
The network configuration should look something like the following:
Cable modem > (Ethernet cable) > [WAN port] AEBSn > (wireless) > MacBook Pro
I have a cable modem and I previously had a Netgear router. The connection from the cable modem that had previously been connected to my Netgear router - I disconnected it and connected it to the Airport extreme base station instead. And then I plugged it in. Is that all the connecting that I need to do? I get the flashing amber light.
Since you changed your network configuration, you should perform a complete power recycle of your network components to allow enough time for them to "synchronize."
Modem/Router Power ReCycling
- Power-off the Cable modem, AirPort Extreme Base Station (AEBSn), & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AEBSn; Wait at least 5 minutes.
- Power-on the computer(s)
Now I did read a few other threads and it sounds like I may need to install the Airport Utility that came with the base station.
Yes, you will need this utility to perform the setup and follow-on administration of the AEBSn.

New AirPort Extreme Base Station with OS X 10.3.9?

I have an iMac running 10.3.9 along with a XP box. Can I use the new AirPort Extreme Base Station with this setup. The sys reqs seem to say that I need OS X 10.4.8. I want to use this new wireless base station with AppleTV.
I really don't want to upgrade to 10.4.x especially since Leopard (10.5) is supposed to be coming out soon. Of course this supposes I can even run Leopard on my non-intel iMac.

I have an iMac running 10.3.9 along with a XP box.
Can I use the new AirPort Extreme Base Station with
this setup. The sys reqs seem to say that I need OS X
10.4.8. I want to use this new wireless base station
with AppleTV.
In order to connect to the new Airport Extreme Base Station 10.3.9 will be fine.
In order to use Apple TV then you will need to be running 10.4.8
I really don't want to upgrade to 10.4.x especially
since Leopard (10.5) is supposed to be coming out
soon. Of course this supposes I can even run Leopard
on my non-intel iMac.
You will be able to run 10.5 on non-Intel Macs.

How do I find a hard drive connected to Airport Extreme Base Station?

*Apple Says:* "If your base station supports it, you can connect a USB hard disk to the USB port on your base station and computers on your network (both wired and wireless) can connect to it to access, share, and store files and data."
Cool. So I followed the instructions. The drive is recognized by the base station and listed in the Airport Utility. It looks like it's ready to go...
So... How do I access the drive? I don't see it on my desktop, it's not under network. I've tried "Connect to server..." and browsing, I can't see the drive, anywhere. Yeah, I've searched the crap out of this issue on google and this message board as well as apple support knowledge base. I'm sure this is a simple issue and I'm just missing the obvious. Help me out.

Hello Timothy Uhl. Welcome to the Apple Discussions!
Try the following to mount the disk...
o Click on the Desktop to enter Finder
o Go > Connect to Server...
o Enter 10.0.1.1 for the server
o Enter Disk Password
o Connect
If this still doesn't solve the problem, let's double-check your disk sharing settings...
AirPort Extreme Base Station (AEBSn) - File Sharing Setup
Either connect to the AEBSn's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN ports of the AEBSn, and then, using the AirPort Utility in Manual Mode, check these settings:
Disks - File Sharing
o Secure Shared Disks: <With disk password | With base station password | With accounts >
(Note: Choose "With a disk password," or "With base station password" if you want to secure the shared disk with a password, or choose "With accounts" if you want to secure the disk using accounts.
If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk.)
o Guest Access: <Not allowed | Read only | Read and write>
o Share disks over Ethernet WAN port: (unchecked)
(Note: Select the "Share disks over Ethernet WAN port" checkbox if you want to provide remote access to the disk over the WAN port.)
o Advertise disks globally using Bonjour: (unchecked)
o Workgroup: <Windows workgroup name>
o WINS server: <WINS server IP address>

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Have 2 airport extreme base stations connected in chain. Airport utility shows slave unit without power. However, power is on slave unit, but status lights do not show up at all. Small green lights at each back port blink. Anyone have any ideas?

Unfortunately, you are describing the symptoms of an AirPort Extreme with a failing (or failed) internal power supply.
As a last resort, try a Factory Default Reset on the AirPort Extreme as follows:
Power off the AirPort by pulling the power cord
Wait a minute or two
Hold in the reset button first, and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back into the AirPort
Release the reset button and allow a full minute for the AirPort to restart
Now try to configure the AirPort again. If you continue to see the same symptoms as before, the AirPort will need to be replaced.

Mac Book pro can't connect to Internet through Apple airport extreme base station

I had problems connecting to the internet in the past with my macbook pro. One day it suddenly started working again but then I bought a second apple TV I lost connectivity. I have tried changing the IP address manually and while it shows me connected to the wifi I am still with out internet. When I hooked up the new Apple TV that I bought it booted my computer from it's ip address. The apple TV though wouldn't work and now nor would my computer. I ended up setting the Apple TV's ip address manually and now it works fine. My computer on the other hand does not no matter if I set it manually or not. Even if I plug in the ethernet cable from the base station it doesn't work. It show that it has a self assigned IP address. After I set it manually it shows that I am connected both via wifi and the ethernet cable but I can't connect to the internet. If I plug the modem directly into the computer bypassing the base station I get internet and it is using the IP address that worked originally.
It has something to do with the connection from the base station to my computer but this is odd considering every other device I have: iPhone 4, apple tv, apple tv, apple mini with retina display all work perfectly via wifi (newest apple tv had to be set manually as I stated above but now works fine). When I check the ip of the base station itself it seems to be different from the ip of the computer when the computer was connected directly to the router. I don't understand why my computer now can't connect to the internet via the base station whether it be wifi or by ethernet. Can you please help me trouble shoot this?
I have an AirPort Extreme base station which allows up to 50 users and a 30 meg connection speed.
I have a MacBook Pro (17-inch Early 2009), OS X Mavericks (10.9.2)

It has something to do with the connection from the base station to my computer
I don't think so..
I just posted a reply which totally vanished.. strange strange website now.
Please post some screenshots of your AE setup from the airport utility.. I want to see the summary page, then the network and internet tab.
Please tell us what modem you use.. is it a router??
If you have satellite or 3G wimax etc service they often are limited to 5 IP addresses... the AE takes one and then 4 more devices can join .. no more.
You need to also give us the screenshot of the IP you are getting in a computer that works.
EDIT
Sorry this is half double post.. the previous page refused to display.. now it has returned..

How do I connect my Synology NAS to my AirPort Extreme base station?

I'm considering replacing an Apple AirPort Extreme base station with my current 5 year old router. I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router. I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Thanks for all your help in advance as I am VERY new with networking devices.

I would appreciate if someone could tell me how the AirPort Extreme differs from any regular router.
The AirPort Extreme is a combination router, wireless access point, and Ethernet switch. It also provides both external USB hard drive and printer sharing. So, it is not much different than most other routers on the market today. The one main difference is how you administer it. Unlike most other routers that employ a web-based administration interface, the AirPorts use a dedicated utility, called the AirPort Utility.
I do not have any OS X devices, but I have a lot of iOS devices. If my understanding is correct, I can set up the AirPort from an iOS device.
Yes. There are versions of the AirPort Utility for OS X, Windows, or iOS devices.
Also, I need to know how I would connect my Synology NAS system to the AirPort Extreme network via an Ethernet cable. I would need to be able to acces the files on the NAS through Windows clients. My Synology NAS currently has a web interface....would I still be able to access that web interface with the AirPort?
Your Synology NAS would connect to the AirPort Extreme pretty much the same as for any other manufacturer's routers. That is, you would connect it to one of the available LAN (opposing arrows) ports on the Extreme. You would still use the same web-based interface as before.
Note: When connected to an Ethernet port, the NAS would still function as usual. The AirPort Extreme would not provide any file sharing functionality when connected in this manner. All file sharing features would be the responsibility of the NAS device.

2 airport extreme base stations later and still no internet connection-

Sorry - yet another beginner with internet connection troubles! (I have read all the posts I could find relating, but without any help).
I have had a Demon broadband account now for about a month (I’m in the UK) and in that time I have purchased a D-Link DSL-300T Ethernet modem and an Airport Extreme Base Station. I got wireless internet working relatively easily – with a powerful range over the whole house and garden, but then one Sunday night, the internet connection via the base station suddenly ‘died’.
I spent the following 3 days scrutinising all of my settings of both the Modem and the Base station, re-setting both, and bought new Ethernet cables / micro filters etc but with no luck. (I’ll point out at this stage that my broadband account is still active, and if I connect the Ethernet modem directly to my iBook [wired] I can still get my broadband connection. Alternatively, I tried daisy chaining the modem to the base station and then via an Ethernet cable to an iBook, but no connection could be made).
When wireless, Airport Admin recognises there is a modem there, and under preferences > network under Airport it states I am connected to the internet – but I’m not.
I then phoned D-Link and they confirmed my firmware was up-to-date for use with Apple products and talked me through all of the modem settings and tweaked a few things, but there was still no connection to the base station. I then phoned Apple. They were incredibly helpful (as ever) and after 35 min. came to the conclusion the base station might not be re-setting itself properly. The replacement one came yesterday, and again I spent a number of hours trying to get it connected to the internet, but there is still no internet connection via airport and I can confirm this from both my eMac and iBook.
Reading through the forums on here, I understand that my particular modem is problematic with the base station, but I can’t work out why it use to work and now it doesn’t! One theory I have investigated is that the firmware of the base station is two advance for the modem following an update, but after reinstalling the original firmware I started with, I still have no luck.
- The eMac is running 10.3.9 / iBook is running 10.4.3. The base station is reinstalled with the latest firmware via system update. The first base station and the modem were delivered to me 31/10/05.
Any help or suggestions would be really appreciated if anyone has any ideas
Thanks for your time
Will.
UK.

http://discussions.apple.com/thread.jspa?threadID=2316
78&tstart=0
I think if you follow the instructions I gave in this
link you will be fine.
Remember, If you for any reason loose your
connection, it is normally always a Power Issue..Your
ISP is down for service ..or some other anomoly, If
you were good before your settings will still be
good...Good Luck...Don
Hi Don,
Thanks for you quick response. I printed off the instructions you posted on the support forum before, and ran through your procedue exactly, (twice) but I'm sorry to inform you that I haven't been able to re-establish my wireless internet connection. Would it be safe for me to assume at this stage that my modem is indeed fualty? It contines to work fine independantly, (I'm using it right now) but it can't seem to make contact with the basestation.
Will.

Wirelessly Connecting HP Laserjet P3015 to Airport Extreme Base Station

Hi, I just purchased a new Airport Extreme Base Station, and was able to establish an internet connection to it. I'd like to find out if it's possible to connect the HP Laserjet Enterprise P3015 to the Extreme, wirelessly rather than via a USB Cable. I've looked at the HP page for this printer, but I'm baffled by all the lingo. I believe it's a newer model of HP printer (or maybe it isn't?) but I bought it new from HP recently.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=S upportFAQ&lang=en&cc=us&docIndexId=64178&taskId=101&prodTypeId=18972&prodSeriesI d=3815797&printver=true#10
Is there a term for the type of printer that can be wirelessly connected? Should the printer, by default, give off a signal that I can pick up? I don't see anything popping up in Airport Utility 6.3
I'm using OS10.7.5 by the way.
I'm off to post a message on the suitable HP forum (if I can find it ) but I'm so used to the Apple Community knowing what's what, that I was hoping that some kind soul here might just have experience with this.
Thank you.
PS. From what I can understand from the "Trouble-shooting FAQ," wireless printing is possible, but I just don't see an option for syncing it up with a MAC? Maybe it only works with Windows?

wuzradioman
I don't see where the P3015 printer is wifi capable. Therefor, you cannot use wifi to directly communicate with it.
Thanks for the reply Wuzradioman. I dug around (several) of HP's sites and it looks like the info was slightly different for the same printer listed on both the Home and Business sites. I did find a link on a 3rd HP page (which I've since misplaced!) that indicates that the P3015 requires a wireless card to be installed. But when I clicked the link for "accessories and additional hardware" a link to the card was nowhere to be found. I'll try to dig up that link in the event that some other poor soul has the same printer and a similar question.
Vernon Alexander
I find the HP printers (they're called wireless printers by the way) to be cumbersome to connect wirelessly. there's a lot of manual work involved that can be time-consuming. For example, I found it incredibly irritating to enter the wireless access passcode.
Thanks for the reply. After talking to some other people, this seems to be the consensus on wireless printing. I guess there's a reason, esp. in enterprise environments, that printers are often hard-wired.
Bob Timmons
you can run an Ethernet cable over a much longer distance than a USB cable, so Ethernet might be the best option, and the one I would prefer.
As far as wireless, If you connected an AirPort Express to the printer and disguised it near the printer, then you could locate the printer anywhere you want and have it connect using wireless to the network.
Instead of installing a wireless "card" inside the printer, you use an outboard device to accomplish the same task.
Thanks Bob. I did end up hooking up via a Cat-5e cable from printer to Airport Extreme base. Previously, I had the printer hooked up via USB cable (at a shorter distance) to my Airport Express, which the Extreme now replaces.
Unfortunately, I can't seem to get the HP Laserjet P3015n printer recognized after having connected it via Cat5e cable to the Airport Extreme. 1) there's still somethign about it being attached to the old Airport Express (which is now used to extend my network. 2) The P3015 is identified as a P3010 - which is a carry-over from when I had originally set up the printer on my (then) main base station which was the Airport Express. I didn't (or rather "stopped") questioning the fact that the P3015 was recognized as a P3010 just because it was the only way I could get the printer to be recognized at the time.\\
But I suppose this new challenge merits a separate thread, which I'll start after I do a search of the support forums. Maybe there's something obvious I'm not doing to get the printer sorted out.

Connecting Airport Express to Airport Extreme Base Station

Hi Folks. I am at my wit's end.
I have an Airport Extreme Base Station (main hub) purchased in 2003. Just bought a new Airport Express and it just won't connect to the AEBS. I think I've tried everything. From automatic WDS set up (described here http://docs.info.apple.com/article.html?artnum=107454) to using the Airport Utility and/or Airport Admin to set up. Nothing.
I've looked through the discussions and found this http://discussions.apple.com/thread.jspa?messageID=7011490&#7011490 but the solution provided makes absolutely no sense to me.
All I end up getting after numerous attempts at connecting to the AEBS is error messages and then a flashing yellow (amber I guess) light. When I do a "hard reset" it just goes back to flashing amber and it seems a factory reset doesn't work because according to this http://docs.info.apple.com/article.html?artnum=108044 I'm supposed to see the green light flash four times after I hold the reset button and plug in but that never happens.
This is driving me crazy. Anyone have any ideas?
Thanks.

Hey John.
I did finally solve the issue but I'm not quite sure how it happened but this is what I did:
First, I did had hard reset on the AEBS and set it up all over again via AirPort Utility. I set it up to use a WPA/WPA2 personal password.
Next I did a hard reset (not a factory reset) (hard reset: while plugged in, use a paper clip and hold the reset button for 15-20 seconds) on the AirPort Express and then restarted my computer.
After restart, I opened AirPort Utility and set up the Express to join my AEBS network. When it got to the point where it asked me to choose the network to join, I chose my AEBS network and it magically knew the WPA password I had set earlier and then after that it was smooth sailing.
I had tried a number of variations of that process many times before (and failed) and for some reason this time, it worked.
Hope it works out for you.
Best,
Benjamin

How do I view a file from a usb hard drive connected to my airport extreme base station on my ipad 2?

Hi,
I just purchased the airport extreme base station. I have a usb hard drive connected to the base station. Is it possible to view this hard drive on my ipad 2? I have been unable to do it. Any help would be appreciated.

You can't, not natively. An app like FileBrowser:
http://www.stratospherix.com/products/filebrowser/
may make this possible, though.
Regards.

Can't get PC laptop to connect to Airport Extreme base station. Help!

I've spent a lot of quality time on the phone with support staff at Apple, Earthlink, and Netgear. Now I turn to you fine folks.
I have an Airport Extreme base station. My G4 is connected to the base station via ethernet, and that works fine. My problem is with the wireless networking with our Dell laptop running Windows XP SP2. Wireless card is a Netgear WG511 with updated firmware. I've configured the network on the PC end using the Netgear Smart Wizard, rather than Windows (I don't know if that makes any difference).
Smart Wizard says the PC is connected to the network, and says that signal strength is excellent. However, there is no connection. I've tried pinging, but get no reply.
The status bar in the Smart Wizard window switches every 2 seconds from "Connected" with excellent signal to "Searching" with virtually no signal. The log shows that it's constantly connecting to and disconnecting from the network.
I've gone over IP and MAC addresses and whatever other settings I could check with all of the respective phone support people. I'm using WPA/WPA2 Personal security, and have double-checked the 13-digit password on both ends. I'm connecting using PPPoE, per Earthlink's settings.
This is maddening! Any suggestions? I'd really appreciate it.
G4 Mac OS X (10.4.10)

See if iFelix's suggestions work for you.
http://www.ifelix.co.uk/tech/1000.html
Remember all the smart wizard stuff is strickley for PC Hadrware and Software and does you no good at all with a Mac.
Don

Connecting PC to VIN airport extreme base station

Similar Messages

Maybe you are looking for