Connecting PCMCIA Sound Blaster Audigy 2 ZS Notebook to Onkyo HT-S580 Recei

Hi
I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop.
I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks.
The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White
The color on the Creative Card end are Center- Orange , rear - Black , Front - Green
There is color difference between these two ends . Is it advisable to connect these two jacks ?
Please recommend the suitable cable type and name for this connection
Thanks

dilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

Similar Messages

PCMCIA Sound Blaster Audigy 2 ZS Notebook vs USB Sound Blaster Audigy 2 NX

Hey all I'm new to this so can anyone tell me which one of these are better taking for granted I have the Logitech z5500's and I want to use the optical cable fuctionality if possible. I am just wondering about this b/c I noticed I cant buy the NX anywhere is this b/c itz very new or too old? I also noticed that the ZS doenst have an optical cord capability but it will connect to my laptop (as does the other one by USB capability). Any help/info on where to purchase the NX or any info on it all as well as the ZS although I already know where to buy that, would be greatly appreciated.
Thanks,
Brandon C.

It's OK now. Problem was in Adobe Audition. I didn't choose proper recording device.

PCMCIA Sound Blaster Audigy 2 ZS, connection to Mixer in and out

I have a PCMCIA Sound Blaster? Audigy? 2 ZS card attached to a laptop. I want to connect this laptop to a Denon X300 Mixer (http://www.platinum-records.com/Deno...0-prod7243.htm) so that I can untilize music on the laptop dri've, into the mixer board. Then I would like to stream this music back into the Computer for recording/manipulating on the laptop.
I think I have the link to the mixer figured out (use provided cable and a mini plug to RCA patch to the line in on the X300 Mixer) but the link back to the computer I am having issues with. Any Suggestions appreciated!
Spindu

dilip wrote:
Hi I have PCMCIA Sound Blaster Audigy 2 ZS Notebook audio card with my Thinkpad laptop. I have bought Onkyo HT- S580 Hometheater system. I was hoping to connect the Line out, Line out2, Line out3 jacks to the receiver's Front, Surround(rear) and Center in jacks. The color on the Onkyo Recei'ver end are Center - Green , Surround(rear) - Blue , Front - White The color on the Creative Card end are Center- Orange , rear - Black , Front - Green There is color difference between these two ends . Is it advisable to connect these two jacks ? Please recommend the suitable cable type and name for this connection Thanks
Hi
Colours may vary --> just connect by the instructions from both manuals.
There are good explanations for
- Stereo and 4-Pole Jack Diagrams
- Connecting a multichannel home theater receiver
- cabletypes needed on connections
on User's Guide.
NOTE: This User's Guide can be found on your driver CD too.
Also, here is the Onkyo HT-S580 manual.
jutapaMessage Edited by jutapa on 0-0-2006 03:32 AM

How can i purchase the Sound blaster audigy 2 ZS Notebook in New Zeala

Hi,
I am trying to buy this sound card for my laptop to improve the quality of music that comes out as it is very importent for my job.
I am trying to buy it from www.soundblaster.com and they say they cannot sell it to me. Whats up with that? can anyone help me buy it's
Thanks Sam

Stokes,
If you are in New Zealand, it's best to check with the support there for the nearest vendor that has the product available for your purchase. There is no online store available for this country.
http://asia.creative.com/support/warranty/list.asp?ctry=6
Jason

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

(ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
CONTINUE ON-
Download RAR file with ISO inside and install if you don't have the installation CD
installation cd with EQ download: http://files.filefront.com//;689430;;/
If you do or after you finish downloading goto step A.
A) Take your Creative Driver/Install CD, copy it to your hard dri've.
B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
C) Set it for Windows XP SP2.
D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
E) Restart when told to
F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
Message Edited by jeepbme on 03-08-200708:50 PM

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Can breakaway box from Audigy Platinum eX connect to Sound Blaster X-Fi Titanium HD?

I have been happily using the Sound Blaster Audigy Platinum eX for a decade or so but it is now time to build a new box. The Sound Blaster X-Fi Titanium HD seems to be the card for me and it does have a multi-pin connection that seems to match the one on the legacy card. The legacy card has the best external box I have yet seen, the perfect combination of inputs, outputs, and controls and I would dearly love to keep using it. Does anyone know if the two items are compatible?

Thanks, I was afraid that might be the case. Would the legacy card work with Windows 7 perhaps or has the audio stack changed too drastically from Windows XP to Windows 7? I am loathe to give up this breakaway box, I have never seen another with this many i/o ports and features.

Sound Blaster Audigy 2 ZS: Listen and play separate trac

Hi,
I recently purchased the Creative Sound Blaster Audigy 2 ZS card for my laptop, however I was wondering if it is possible to play one track and listen to a separate track while the first is playing. The reason being i am using the laptop for mobile dj'ing, so really want to queue up the next track before playing it blindly. If someone could let me know if it's possible and if so how to do it, that'd be much appreciated. Thanks,?Jason

As you mentioned laptop, I assume you are speaking?of Audigy 2 Zs Video Edition (USB) or Notebook (PCMCIA)?None?of?Audigys?is?good for this type of use?but, you could try with some DJ software as like the Nati've Instruments Traktor in ASIO mode.- http://www.nati've-instruments.com/index.php?id=djline?(demo available)?jutapa

Sound blaster audigy 2 value doesn't play cd's

.sound blaster audigy 2 value doesn't play cd'sY I'm running win 2000 sp4 -- have 2 cd/dvd players/burners--using soundblaster audigy2 value sound card with software from original installation cd. When I try to play cd's using the mediasource player/orginizer it apperars to play but no sound is heard. It plays mp3 cd's fine but when i try to play a regular cda cd no sound is heard. Everything plays fine if I use windows media player.
It appears that the creative mediasource software is corrupted. I have tried removing and reinstalling it multiple times with the same result. It is mediasource version 2.02.59 and the drivers are version 2.9.6.
The sad thing is that is worked fine at one time but now it doesn't.
I have also run the auto update and tried the newer versin of mediaplayer(3.30.2) but that creates even more problems.

As you mentioned laptop, I assume you are speaking?of Audigy 2 Zs Video Edition (USB) or Notebook (PCMCIA)?None?of?Audigys?is?good for this type of use?but, you could try with some DJ software as like the Nati've Instruments Traktor in ASIO mode.- http://www.nati've-instruments.com/index.php?id=djline?(demo available)?jutapa

Pin Specifications for Creative Sound Blaster Audigy SB1394

;Pin Specifications for Creative Sound Blaster Audigy SB394 I have a Sound Blaster Audigy SB934 CA000-IAF Creative Tech '0 AA299J basically a Sound Blaster Audigy Platinum (wiouth the front bay for conectivity.)? And since I dont' have the front bay for heaphone and mic conectivity I was wondering if there is a spec sheet for the 40-Pin conectivity that is used for the front bay. I was wondering if anyone could provide me with such spec sheet so that I can try to conect my frontal Intel board plugs for headphone and microphone (would like to use my headset.)
There are a lot of pins on the card and well only about 8 in the conector for the front plugs. So if any dev from the forum is reading this I would greatly apreciate it if I could use my front Intel sound plugs on this old model card.
Thank you for all your help.

http://www.driverheaven.net/audio-general-technical-discussion/5279-creative-audigy-2-ad_ext-pin-assignment.html
That will help you with the pin assignments.......
And you can also try one of these to connect a lot more easily to your front panel audio jacks.......
www.x-tap.com
I used the above with four Audigy LS and SE's and it works a treat!

Sound Blaster Audigy Advanced MB.

Hello guys,
what is the Sound Blaster Audigy Advanced mb?
because in the notebook DELL is possible to upgrade audio card in the audigy Advanced MB!!!
is it possible?
How to make?
thanks,
Rockerfx

I think it's a software. I just ordered Dell E405 and upgraded to this option. However, the sound card in my laptop is a SigmaTel HD audio. There's no sign of any Creative Soundblaster in my laptop. If you're planning to order a Dell, don't upgrade to this option. Or if you really want to upgrade, make sure you talk to Dell IN DETAIL before you place your order.
GOOD LUCK

Sound Blaster Audigy ADVANCED HD Audio??

I had this for my Dell XPS M70 on Vista but now that i've upgraded to windows 7 i can't find anything on this.
I tried to download the windows 7 driver("SB24_PCDRV_LB__04_0090") from creative's website but it says it does not detect any supported device on my computer.
Am I missing something else here?

AeonSpace wrote:
Notebook: Dell Inspiron 6400
OS: Vista 64-bit
Sound card according to Dell: Creative Labs Integrated Sound Blaster Audigy ADVANCED HD Audio
I am unsure which driver to download for this sound card. Would it be simply the "Audigy Series" driver? This particular name is not mentioned in the supported cards.
The Audigy Advanced MB isn't a device, it is an application that makes your onboard sound sound better. Therefore, it doesn't have a "driver", the only drivers involved would be the driver for your onboard sound, which you need to get from Dell.
As for the application itself, it is my understanding that it's not ready for Vista yet, and I am currently trying to get an update on that situation.
Dale

Connecting my sound blaster to a marshall

Hello guys,?I just bought a guitar marshall amp. I want to connect this amp to the audigy sound blaster 2 zs. I have a coaxal cable and I just dont know how to connect the sound blaster I have with the marshall amp.Any comment is appreciated,?ragards viski007

viski wrote:
Hi ,First of all thanks for your comment.Well yes, as to the is it amp to the pc card or vise versa its sound blasters coaxel out to the amp.So I tried to connect it via the coaxel out in the front panel of the sound card into the input of the amps in but it doesnt work.Do you gyus have any other suggestions especially using the coaxel out of the sound card.kind regards Viski
Do you have S/PDIF coaxial input in your Marshall amp?
jutapa

Connecting PCMCIA Sound Blaster Audigy 2 ZS Notebook to Onkyo HT-S580 Recei

Similar Messages

Maybe you are looking for