Connecting Points

Using the Pen Tool, when I stop at point C and deselect, the two ways I know how to
then continue to connect C to D are:
♦ Select the two points and "Join" (Ctrl + J)
♦ Start at D and connect to C.
▬)☼ ♦ ☼(▬
Are there any other ways that I don't know of?
Thank you.

In Adobe Illustrator CS5 the script is not necessary in most cases as you can now select more than two points and have the connected with Command J.
Like this
Then Command J youget this
The points have to be on top of each other if you intend to make a closed path
but will join all the points if not on top f each other just not the two that re farthest away from each other keeping the path open.
Very good addition to the join command.

Similar Messages

Display the name of the connection point

Hi,
I would like to display the name of the connection point added via shapesheet to be displayed on the shape as part of the shape text. Is it possible in Visio?
Thanks,
Rohit

You will probably have to write a macro (vba) to accomplish that.
al
Al Edlund Visio MVP

Unable to create a Service Connection Point

Hi -
I set up a new SharePoint 2013 environment. Everything installed successfully. When I launch Central Admin, it doesn't accept my logon ID/password. I found the following in the application event logs.    I assume our AD guys will
need to set up a new SCP as pointed out here:   http://technet.microsoft.com/en-us/library/ff730261.aspx
I just don't recall having to ever do this before in any of the dozen or environments that I had set up.
Unable to create a Service Connection Point in the current Active Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.
Microsoft.SharePoint.SPException: The object LDAP://CN=Microsoft SharePoint Products,CN=System,DC=cprt,DC=adt,DC=net doesn't exist in the directory.
   at Microsoft.SharePoint.Administration.SPServiceConnectionPoint.Ensure(String serviceBindingInformation)
   at Microsoft.SharePoint.PostSetupConfiguration.CentralAdministrationSiteTask.ProvisionAdminVs()
By the way, when I tried to run PowerShell to create the Admin Content DB, I got this error, even though the install account has sysadmin privileges on all databases:
New-SPConfigurationDatabase : Cannot connect to database master at SQL server
at SP2013Server -AdministrationContentDatabaseName. The database might not
exist, or the current user does not have permission to connect to it.
At line:1 char:1
+ New-SPConfigurationDatabase -DatabaseName SharePoint_Config -DatabaseServer
VMRS ...
I just went ahead and then ran the Product Config Wizard and it set up everything fine. Some folks were able to resolve by running config wizard twice?
http://social.technet.microsoft.com/Forums/sharepoint/en-US/6ae61eb1-9405-4421-9bc7-a0037f4ec29b/sp1-upgrade-failure-service-connection-point?forum=sharepointadminprevious

Hi,
According to your post, my understanding is that you were unable to create a Service Connection Point.
To resolve the “Unable to create a Service Connection Point in the current Active Directory domain”
error, you need to make sure you have permission to write to this container.
“You have to grant permission to write to this container to any user accounts or domain accounts that could run the SharePoint Products
Configuration Wizard. If the account does not have permission to write to this container, the following warning will appear in the log file for the SharePoint Products Configuration Wizard: Unable to create a Service Connection Point in the current Active
Directory domain. Verify that the SharePoint container exists in the current domain and that you have rights to write to it.”
http://technet.microsoft.com/en-us/library/ff730261.aspx
The “New-SPConfigurationDatabase : Cannot connect to database master at SQL server”
error is a common issue and has various resolutions.
More often than not it is a firewall issue on the SQL server so check that OR it's that SQL server has not been enabled for remote connections.
I would recommend you follow all the steps and options in
Cannot connect to database master at SQL server
and
SharePoint Install – Cannot connect to database master.
More information:
Configuring Service Connection Points for SharePoint 2013:
http://onpointwithsharepoint.blogspot.in/2013/06/configuring-service-connection-points.html
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Trying to upload Transportation connection point

hi guys,
I am tryind to upload Transportation connection point (transaction 0VTD) through LSMW using the recording method. But when i run the LSMW program in background it thorughs an error "No batch input data for screen SAPL0VTR 2310", probably it is because i am missing some screen in the recording. Could you please suggest me a solution on this?
Is there any other method of doing this upload?? BAPI,IDOC's, Direct Input????

should I use BDC recording ??

Connection Points using ActiveX in TestStand

Hi,
Had a query . Is is possible to register connections points using Test
Stand. I am having a COM Dll which incorporates Connection Point
Mechanism. I am able to use this using VC++ client. But not with Test
Stand Application.
Regards....

That should handled in code modules you write rather than purely in a sequence. Your connection point handlers could set TestStand globals, use TestStand synchronization objects (such as queues or notifications), write to files, set DLL globals, or use any of the dozens of other possible methods to communicate with TestStand sequences

XY Chart - Connecting Points

Post Author: apskhanna
CA Forum: Xcelsius and Live Office
It seems Xcelsius is unable to connect the points drawn using XY chart, unlike in Excel. This is a major limitation and I was wondering if any one knows how to acheive that directly or indirectly. I need to draw lines at an angle using a variable but am unable to because there are no drawing aids or possibilty of connecting points on the xy chart.

I currently face the same limitation and am really curious about any workarounds to display a trendline connecting the points of an XY Chart.
Thanks for any kind of help.
Edited by: Christian Tobias Schieck on Jul 29, 2008 5:13 PM

#include "%(Filename)_i.h" inserted into C++ source after adding connection points to ATL object using wizard.

What is the subsitution for this appearant macro? Solution will not build if removed.
Using
Adding Connection Points to an Object directions.

Hi Shawn,
Since you have posted this issue to the VC++ forum, I think you would get better support there:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/8494410e-9578-4b67-a08d-3380aac10fcf/include-filenameih-inserted-into-c-source-after-adding-connection-points-to-atl-object?forum=vcgeneral#503cbc06-40a2-4073-a56e-1b384b11b56e
So I will move this thread to the Off-topic forum. Thanks for your understanding.
Sincerely,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

COM: "Add Connection Point" does not generate Fire_* methods (VS2010)

I'm currently attempting to implement a COM component with event support using connection points.
I've followed the general instructions given in
http://msdn.microsoft.com/en-us/library/9h7xedd1%28VS.80%29.aspx and
http://msdn.microsoft.com/en-us/magazine/cc163361.aspx .
Meaning I added a method description to the IDL file, generated the underlying type library by doing a compile on the IDL-file, and performed the "Add Connection Point" on the class in class view.
Following this procedure works like a charm for new projects - connection points are created without problems. However, on the project I've been working on for a while the necessary Fire_* methods are not created. The CProxy_* class is created, but it's
empty except for the class declaration (no methods)).
I've been looking around the net a bit and I noticed I'm not the only one having this problem. So I was wondering does anyone know what could cause this, is it a bug and, if so, is there a way to solve this?
update:
Similar problem 1
Similar problem 2

Hello,
For
the IDE wizard issue, please consider the following lists of items that we can try.
1. Have we applied the latest service pack? If not, apply the service pack.
2. If we reboot the operating system to safe mode, do we have the problem? This can help to isolate whether any other applications are interfering
with Visual Studio. Note that some features (like IIS) are not available under safe mode. Please check whether this can apply or not. In addition to safe mode, we can also suggest “clean boot”:
http://support.microsoft.com/kb/310353.
3. If we create a new user account, do we have the problem? This can help to isolate user profile corruption related causes.
4. If we disable Add-ns (e.g. “Tools” | “Add-in Manager”) and run “devenv.exe /safemode”, do we still have
the problem? This can eliminate the possibility that third party Add-ins are causing problems.
5. If we create a new project, do we have the problem? Sometimes corrupted project settings can cause problems. These are project specific.
6. If the problem remains, we can use Visual Studio Setup Wizard (via Control Panel) to repair Visual Studio. It can restore the Visual Studio
Installation into its original state.
Cheers
Yi Feng Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Welcome to the All-In-One Code Framework! If you have any feedback, please tell us.

Application crash with message "Hidden Wnd that Fires connection points"

Our Swing application regularly crashes with a Windows error message popup.
Title: "Hidden Wnd that Fires connection points: javaw.exe - Application Error"
Message: The instruction at "0x7c912905" referenced memory at "0xfffffff8". The memory could not be "read". Click on OK to terminate the program. Click on CANCEL to debug the program."
Our logfile contains SystemOut, SystemErr and log4j entries and shows nothing. Also no hs_err_pid is written to the file system. Google did not find anything when searching for the message box title.
Environment:
Java(TM) SE Runtime Environment (build 1.6.0_20-b02)
Java HotSpot(TM) Client VM (build 16.3-b01, mixed mode)
Microsoft Windows XP [Version 5.1.2600]
Does anyone have an idea what could cause such a problem?

How do I check if NIO is running non-blocking mode ? I am reusing a tcp/ip basic class (provided with my embedded interface chip) which does not mention it being either way.
I only tried in browser. I have to add code to handle the applet viewer case. it crashes in every browser I tried and has no console dump in any. I put it together quickly for a customer and did not add debugging messages in the code since it was provided and working...
Gotta go do that now.
Thanks

Mismatched Transportation Connection Point in Stages

Guys,
I am Creating stages automatically via Routes in Deliveries.
Del 1: Shipping Point A --> Town B
Del 2: Shipping Point A --> Town C
Now the system picks up Stages as:
Dep Point A --> Dest Point B
Dep Point B --> Dest Point C
Automatically! However even after maintaining transportation connection points, the System picks Up Shipping Point Desc for A, Customer Desc for B and C. I want it to be my Connection Point desc. It doesnt pick it up ,, HELP..

Guys anyone can help me here? Urgent help required

Ethernet wont connect point to point

running 3.17 kernel, i can establish connection between my PC and 706board via network switch, however if i connect board directly to win7 PC via ethernet port i cant ping the board at all. I setup a board IP by using ifconfig eth0 someip
is there something i need to do in config menu ?
so after look at the bootup message i see this
under petalinux guide, during bootup
Configuring network interfaces... udhcpc (v1.20.2) started
Sending discover...
xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
xemacps e000b000.ps7-ethernet: link up (1000/FULL)
however mine show when connect point to point
Configuring network interfaces... xemacps e000b000.ethernet: eth0: no PHY setup
udhcpc (v1.22.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
any ideas?

Are you running a DHCP servier on your PC? If not you may need the network switch for discovery unless you can program the board to use a fixed IP address.

Connecting Points in a Disperssion Chart?

Hi All!
(Sorry about my English)
I have readed the actual 32 pages of this Numbers Forum and it seems that there's no solution to my problem. The question is simple:
Could I connect the points in a disperssion chart like in Excel. In fact, when I import an Excel document that contain a disperssion chart with connected points I get an import error...
Thanks for all!!

Thanks jaxjason. I'm sorry, my Numbers is in Spanish, and it calls "dispersion" to this type of chart...
Perhaps this is the only reason for me to miss excel. And I can connect the points with the pen figure tool (bezier curve), but it isn't an interactive way to do that, you know...
In version 1.1 perhaps? haha! I doubt it... may be in version 2...
Right! Thanks!

Configuring the Transportation Connection Point in defining Routes

Dear Friends,
I have to configure the Route Determination for two customers:
The Route follows like this:
Route-01: Norfolk--> Chicago---> Cleveland
Route-01: Norfolk--> Chicago---> Denver
I have configured everything except I am confusing in configuring Transportation Connection Point. This Trans. Connection Point is used for Load Transfer point.
In Trans. Connection Point there two Tabs called Reference Customer/Vendor wherein I can give the number of the customer so that while creating Sales Order the Route will come automatically. and Reference Shpng.pnt/Plant.
For the creating of Transportation Connection Point at Cleveland and Denver I dont face any problem as in both the cases only one customer is there because of two different customers.
But in the case of Chicago and Norfolk how can I give both the customer numbers so that while creating Sales Order the Route should appear automatically.
Could anybody explain which factor triggers the Route to appear automatically while creating the Sales Order?
I have to use these Transportation Connection Point in defing the "Route Stages".
I will be thankful to all of you,
Thanks in advance,
Jans

Guys anyone can help me here? Urgent help required

Moving router connection point.

Yesterday the BT engineer came round and installed Infinity in the house - everything works fine.
The problem is that connection point that I requested is only a temporary point - at somepoint I want to rig up a home network and put ethernet sockets in some rooms.
The original master socket was at Location A.
The engineer setup the open reach infinity socket at Location B.
The socket at Location A looks like this one:
http://helpforum.sky.com/t5/image/serverpage/image-id/635i42831032043407CB/image-size/original?v=mpb...
The socket now at Location B looks like this one:
http://phil.lavin.me.uk/wp-content/uploads/2012/02/fttc-faceplate.jpg
Originally the socket at Location B was a plain old phone extension socket.
My question is; how can I go about moving the modem from Location B to Location A? Is it just a case of procuring another faceplate and fitting it at Location A? Or is Location B now the master socket and an engineer will be required to make Location B the master socket?
BTW; the engineer told me that it is copper running into the house not fibre optic cable.
Thanks,
Ben.
Solved!
Go to Solution.

Yes socket B is now the master socket.
The only person/people that can move the master socket is Openreach or one of their appointed contractors.
If you want / need the modem at socket A you can install your own data cable.
Method A High quality RJ11 to RJ11 cable. The maximum length being 30 meters. This cable should be as short as possible as it directly affects overall connection speed.
Method B using the centre pairs of wires from the cable in method A you can connect on to the back of the RJ11 socket inside the master socket. Others please comment - Are you allowed to do this yourself? I know Openreach normally do it this way.
Keeping the modem at Socket B and the router / HomeHub at socket A
Method A Connect the two together using a longer CAT5e or better network cable. This can be up to 100 meters long.
Method B Conenct the two together using ethernet over power adapters. Others please comment!
Yes the technology you have brought into is FTTC, Fibre to the Cabinet. The connection between your premises and the telephone exchange goes via a local street cabinet. Your connection to the cabinet is by copper cable. Unless you are unfortunate and then it could be aluminium. The cabinet now houses the DSL equipment that used to be in the exchange. Between the cabinet and the exchange is a fibre optic connection shared by everyone that is connected at your cabinet.
Hope this helps.
Dave

Connection Point In Route

Dear Friends,
When we create Connection Points [0VTD]. In that screen 4 tabpages in bottom
1. Scheduling :- What is use of it? if i will mention days here then where it will affects.
2. Reference Customer/Vendor :- what are the scenarios where I should use customer number? If i will maintain it then how it will impact on route determination.
3. Reference Shipping and Plant :- same as like above question.
Why we are mainting Address Detail for connection point where it is required.
Kindly Regards
Arun

A scenario like this , For a shipment in a specific route (eg. east or south), there a spcific customers
to whom you are delivering materials. Connection point where it starts from u r company to different customers.
When u define route scheduling and route determination, u determine a route u can see the customers in in that route.
Say it is like itinarary for ashipment.

Do I *really* need a Service Connection Point in AD to complete a Project Server 2010 SP2 installation?

Hi all,
I have installed Project Server 2010 SP2 and run psconfig.exe
PSCONFIG is failing because it cannot set up a Service Connection Point in AD. I've checked in AD and the contains 'Microsoft SharePoint Products' does not exist. All the resolutions I can find suggest adding the container into AD.
The issue I have is that I have no control of the AD, and adding containers will take lengthily negotiation.
Is there any way of completing the installation and getting my site back without adding the container into AD?
Thanks in advance.

other solutions
1) check timer service see if it is running
http://www.jonthenerd.com/2011/06/30/sharepoint-2010-sp1-upgrade-error-unable-to-create-a-service-connection-point-in-the-current-active-directory-domain/
2) check UAC (and the rest of the technet answers - some are listed below)
http://social.technet.microsoft.com/Forums/en-US/94a8bb64-e0ea-493f-8e29-01347b1fc6c7/psconfig-fails-failed-to-upgrade-sharepoint-products
3) My workaround:I
run once again the command „PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures“  in
the “Bin” Folder as an administrator console session.In the moment I saw the staus “Configurationtask 5 of 6 is executed”
I start to run the command “net start SPTraceV4 & net start SPWriterV4 & net start SPAdminV4 & net start SPSearch4 & net start SPTimerV4” in a parallel administrator console session and after that the configuration task finished successfully.
http://social.technet.microsoft.com/Forums/en-US/94a8bb64-e0ea-493f-8e29-01347b1fc6c7/psconfig-fails-failed-to-upgrade-sharepoint-products
4) Try running the psconfig.exe command a second time
5) had the same issue and called Microsoft support. Here is the fix:
Stop the "SharePoint 2010 Timer" service
Delete ONLY the xml files from C:\ProgramData\Microsoft\SharePoint\Config\216f8013-b78b-4e5b-8631-3a5f4c7277e8
Note: Do NOT delete the cache.ini file in this folder
Edit cache.ini and change to "1"
Start "SharePoint
2010 Timer" service
Run psconfig again: PSConfig.exe -cmd upgrade -inplace b2b -wait -force
6) Initially I tried http://support.microsoft.com/kb/2009272 but
it did not help (I re-implemented later).
I re-registered the DLL’s as perhttp://social.technet.microsoft.com/Forums/da/winservergen/thread/b4bd0deb-45d0-4661-8c50-a2b45db41103 from
NareshD.  I do not believe this is necessary unless there is a corruption in the system but I am noting here just
in case.
I tried to run The PSConfig but it was failing:  I
had to do the following in order to make it finish successfully:
(from same page at http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/94a8bb64-e0ea-493f-8e29-01347b1fc6c7/)
On the migrated SBS2011 PSCDiagnostic Log I found no entry to detect or start the services SPWriterServiceInstance and SPTimerServiceInstance.
I run once again the command „PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent
-install -cmd installfeatures“ in the “Bin” Folder as an administrator console session.
In
the moment I saw the status “Configuration task 5 of 6 is executed” I
start to run the command “net start SPTraceV4 & net start SPWriterV4 & net start SPAdminV4 & net start SPSearch4 & net start SPTimerV4” in a
parallel administrator console session and after that, the configuration task finished successfully.  (I
just opened another cmd window and copy/paste the sequence below when I saw the status “Configuration Task x of y” on the screen:
net start SPTraceV4
net start SPWriterV4
net start SPAdminV4
net start SPSearch4
net start SPTimerV4
-Note SPSearch4 is disabled in our system…
Very awkward but it worked…
I implemented http://support.microsoft.com/kb/2009272 again.
Backup started working with no errors.

Connecting Points

Similar Messages

Maybe you are looking for