Connecting Power Mac G5 dual 2.0ghz to a tv - DVI to VGA

I have a dual 2ghz G5 that I'd like to connect to my TV which has a female VGA connection. I have a DVI cable that I was using with a monitor, and a DVI-VGA male adapter to connect the computer to the TV. I want to use the TV as the sole monitor. I changed the resolution to be 800x600 in case that was the issue, but I still can't get the TV to recognize the signal. I read somewhere that typical adapters suitable for PC use may not work for Macs because there may be some kind of signal difference. Help!

This forum is for hardware G3 & older, running OS 9 & older.
Suggest you repost your question in the G5 forum or Tiger forum. See index at http://discussions.apple.com/index.jspa?categoryID=1
 Cheers, Tom

Similar Messages

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

How to connect my Mac Air 13" to my Philips display with DVI and VGA ports?

Use a DVI to micro-DVI adapter if you're on an original MacBook Air, and a Mini DisplayPort adapter for a newer one.
(119682)

Power Mac G5 dual 2.0ghz (late june 2004) - trouble upgrading video card

Hi, I'd really appreciate any help. I have a PowerPC G5 Tower, dual 2.0 GHz, DVI/AGP version (June 2004 model) with 8gb ram. I recently got the Apple 30" monitor and wanted to run it along side my 20" apple monitor, so I bought the ATI Radeon 9650 dual dvi video card (ATI-G5-9650 Power Mac G5 ATI Radeon 9650 Supports 30" Display 256MB (DVI/DVI) (8X AGP) Video Card). I pulled out my previous video card from the AGP slot and inserted this one into the same slot. I turned on the machine and plugged in both monitors to the dvi ports and both screens were blank when I booted. I tried plugging in only one of the monitors, but again, just blank. Does this mean the card is bad? Did I put it in the right slot?
Any advice would be helpful. Thanks

I'm installed an update, not 100% if it was the correc thing to update, but it was all I could find. I went to the ATI site and downloaded the ATI Displays 4.5.7.dmg and installed that as well as the ATI 10.3.6 SW Update.dmg. This was from the ATI site at: http://ati.amd.com/support/driver.HTML
Is there another place or something specific for the 9650 that I need to download?
thanks

Power Mac G5 Dual 2.5 - Move Hard Drive to another G5??

Hi,
I'm using a Power Mac G5 Dual 2.5 w/ OS 10.5.8 with my Pro Tools 7.4.2 HD3 rig, 2 internal hard drives and tons of external FW hard drives. It's being hinky with me (every time I reboot/restart the Mac, I have to take the side cover off or it won't boot; wierdest problem ever), and being that I don't want to plunk down thousands of dollars on a new Mac and all new Pro Tools equipment, I'm hunting E-Bay for an exact duplicate of my Mac, of which there are plenty. Since PowerPC architecture is long dead, they are dirt cheap. No reason not to have a spare.
My questions are:
If I buy another Power Mac G5 Dual 2.5 machine, and swap the hard drive it comes with, and use my already functional hard drive (with the OS, Pro Tools and all related plug-ins installed), and move over my Pro Tools cards and 8 GB of RAM to the new(er) machine, will it boot up and work without me having to reformat/reinstall everything?
I also see numerous Power Mac G5 Dual 2.7 machines out there as well. What are the chances of doing the same as question 1 with this? I know the processor is different, but would my already formatted and functional hard drive care? I don't think this will work, but I have to ask.
If Question 2 is even possible, would upgrading to a Dual 2.7 even be worth it as far as noticeable speed improvement? Superior Drummer, EZ Drummer and EZ Keys are all real time plug-ins that need the Mac's processor/memory to work. They don't use the Pro Tools cards to work. So, would getting that extra 200 Mhz of processor power even matter?
The reason I ask is that reinstalling the OS and Pro Tools is not the issue; 4 hours and it's done. BUT, reinstalling Superior Drummer, EZ Drummer,and EZ Keys, along with the mountain of expansion packs, will literally take several days of work. If I could just plop my old hard drives and 8GB of RAM into a newly purchased G5 Dual 2.5 or 2.7, and not go through that, it would be AWESOME.
Thanks for any feedback on this.

Just got done making the transfer to the "new" Dual 2.7 G5 I bought off E-Bay. (yes, on Christmas Eve, because....well.... I have no life). Worked dead, solid perfect!!! I'm grinning from ear to ear right now.
I had to reset some pref's in Pro Tools (not an issue), Just got done running Pro Tools through its paces, and it works perfectly. All plug ins run (had to re-authorize Superior Drummer and some related plugins because it detected the change in system serial #, again not an issue). Other than that, it worked like it always has. I loaded every third party plug-in I could find, and every third party program I could find, and so far everything works without any issues. Only exception is Team Viewer locks up when I try to close it (have to Force Quit), but I couldn't care less right now. I use that twice a year if that, and just to have someone help me remotely.
Thanks for the info and help. This made my Holidays.

Power Mac G5 Dual 1.8 PCI (4 RAM Slots) - want to upgrade to 8GB?

My computer is a Power Mac G5 Dual 1.8 PCI (4 RAM Slots)
Is there any way I can break out of the 4GB RAM limit into the world of 8GB RAM without having to buy a newer computer. I need to open a large 4.5GB TGA file in After Effects (48000 pixels x 36000 pixels).
Failing that, is there an application like RAM doubler I could use temporarily to get me though this job?
Power Mac G5 Dual 1.8 PCI (4 RAM Slots) Mac OS X (10.4.10) Currently have 4GB RAM installed

If there is not enough RAM, OSX will use space on the disk drive, so the amount of RAM should not limit the file size an application can handle, but speed will be reduced. 32-bit addressing can restrict the use of huge files, but there are ways that applications can get around it (at the expense of lower speed).
If After Effects has a file size limit, extra RAM will not help A later version (maybe using 64-bit mode) may handle larger files. 64-bit applications can be written to run in Tiger on G5s, but will be easier to write when Leopard is released.
You may be able to use some other application, such as Photo Shop, or Graphics Converter, to extract part of the TGA file, or reduce its size by changing its resolution, so you can use the result in After Effects.

Fan speed problem Power Mac G5 Dual 1.8 GHz PowerPC - please help

Please HELP, I have a fan speed problem with my Power Mac G5 Dual 1.8 GHz PowerPC
This is a NOT an Intel machine. I am running Mac OS X v10.5.8
Power Mac G5 - PowerMac 7,2 - Power PC 970 (2.2) - 1.8 GHz with 2 CPUs - L2 Cache (per CPU) 512 KB - Memory 8 GB - Bus Speed 900 MHz - Boot ROM version 5.1.5b1
I have included below Links to download a sound file (.m4a) that I recorded of the fan speed problem and both a .pdf and .spx files of my system profile.
download sound file
http://homepage.mac.com/rep3/filechute/myG5dualsFans.m4a
down load .spx file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.spx
down load .pdf file of my system preferences
http://homepage.mac.com/rep3/filechute/systemProfileREP3-G5dual.pdf
When did the fan problem start?
After I replaced the mother board on the computer.
Why did I replace the mother board?
Because the experts at apple agreed with my diagnosis that the major crash problems & kernel panics must have some thing to do with a logic board gone bad. They would not work on it, because this Power Mac G5 dual 1.8 GHz machine is now a legacy model.
What I have done to attempt to fix my fan speed problem? yes I checked the obvious things, here is a list:
1) yes I checked to be sure that the new mother board was the same part number as the original one, and that all things that were unplugged from the old mother board - were actually plugged into the new mother board.
2) all the fans work, I can see them spinning if I use a flashlight and look at them (cover on and off to get at some of them)
3) check all RAM to make sure: a) it was installed properly b) that the RAM worked using TechTool Pro c) even started the machine with only the original RAM that came with it.
4) I installed a Temperature monitor - to see if there was something reading as very hot inside that was causing the machine to continually run the fans at a high speed. No, no heat issues that I can see. Here are the reading from the sensors in degrees fahrenheit, 2009-10-11 16:11:01 -0500
CPU A Die Temperature: 75.7℉
CPU B Die Temperature: 81.5℉
Drive Bay: 68.9℉
Main Logic Board Air Inlet: 64.8℉
Main Logic Board Ambient: 73.6℉
Main Logic Board Backside: 76.3℉
Memory Controller Heatsink: 93.2℉
Processor Card A Ambient: 77.5℉
Processor Card B Ambient: 77.0℉
5) zapped the PRAM
6) followed the SMU reset instructions for
Power Mac G5 (Late 2004)
To reset the SMU on a Power Mac G5 (Late 2004) computer, simply do the following:
• Turn off the computer by selecting Shut Down from the Apple menu or by holding the power button until the computer turns off.
• Remove the power cord from the computer.
• Wait two minutes.
• Plug in the power cord.
• Turn on the computer.
7) followed the SMU reset instructions:
Resetting the Cuda/PMU
How to reset the PMU:
• If the computer is on, turn it off.
• Disconnect ALL cables from the computer, including peripherals and power.
• If possible, move the computer to a place where you are not standing on carpet.
• Open the case and ground yourself by touching part of the metal frame inside the computer.
• Find the Cuda or PMU button
• Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
• Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
• If the computer still does not respond after resetting the PMU, the computer may require service from an Apple Authorized Service Provider.
8) ran disk utilities, repaired permissions
9) found a setting in the system preferences that a chat room person suggested had something to do with fan speed. In Energy Saver, under options, processor performance was set to highest, I set it to automatic - this did not change anything that I could tell - BTW I checked my other G5 (a single processor that works fine) that is the setting that that it is set to, and it is nice and quiet.
10) restarted the machine, ..
11) found a Fan Control System Update - but it did not install when I tryed to install it -
12) booted from OSX install disk and ran that disk utility
13) used OnyX to fix disk permissions, clear caches and temp items
Nope - still have the same high speed fan problem. ... PLEASE HELP!!
I have been reading in the MacInTouch reader reports - found this: some one said to use this - thermal re-calibration using the Apple Authorized Service Providers' disk - but that's not available, at least I can not find it - anyone? have an answer to finding this - or can do it for me? I am in Chicago.

The Genius at the downtown apple store said that because it's a "legacy machine" they would not work on it, .. so should I push them?
Well, I personally think that's ridiculous, I'd Push them, I'd call AppleCare & talk up the chain if need be... there the ones that have or should have that Disc... man o man... Personally I'll never visit an Apple Store again in my lifetime, maybe try an independent AASP if none of that helps!..
http://tinyurl.com/ykomqkn
Man-o-man, pop my cork before I explode on that one, if I had anything to do with it I'd close that store.

An advice for an used Power Mac G5 dual core 2.3

Hello.
I used a Power Mac G5 PCI-X (sett. 2003) 2.0 GHz, working with Photoshop. It worked great for yeras, but now, due to its typical logic board lack, it got broken and is unable to boot anymore (three times flashing power light).
Now, I use software for PowerPC CPUs, so I can't get new computers, because I should replace all the software too!
I'm going to buy an used Power Mac G5 dual core 2.3 GHz:
http://www.everymac.com/systems/apple/powermacg5/stats/powermac_g5_dual2.3.html
This is the configuration:
Ram: 5.5 GB
HD: 250 GB
SVGA: GeForce 6600 - 256 MB.
About 650 dollars.
According to you, is this a good product? do you know any issue or manufacturing fault?
Would you buy it if you were me?
Thank you!

I tried heating it (not with the hair dryer), after about 1 hour it booted and worked very well, as in past. But when I powered it off, it started again with the same problem: unable to boot and three times flashing light.
I need a working system.
Furthermore, I removed the hard disk (sata 160 GB), and installed it in a Mac Pro: but it recognized only the second partition (data). So I run the Disk Utility and gave immediately an error (wrote in red and big), writing that the hard disk had a serious physical problem, and that if the computer was able to see the disk, I had to make immediately a backup.
But the three-times flashing light error of the G5 was not given due to the hard disk, because I tried several times to boot it from the OSX DVD, also removing the hard disk, and it always gave the same problem.

Power mac G5 dual, startup and fan problem

Dear macpeople,
I have a Power mac G5 dual, 1.8 ghz, ramm 4.5GB. I guess from 2004. Only added more Ram three years ago. Never had any serious problem till a week ago. I have read a lot of similar questions and responses on my problem in this forum but till so far i have not been able to solve it.
Since a couple of weeks my mac sometimes did,nt recover from sleep. Starting up gave me some trouble because the fans were racing like **** and i had to restart several times to be able to boot normally. In the beginning just the upper fan next to de CD player ran fast and loud but now all of them get crazy at start up. Very rare times G5 is able to recover this (fans slowing down) and boot up, but this only in the safe mode.
I have cleaned the mac
i have resetted PRAM
i have used utility disk, all ok
i have unplugged for 40 min, reset in the machine, safe start up.
Checked memory
The only way to boot is in the safe mode. The fans start blowing fast but after 4 min. they slow down then the blue screen appears and mac builds up normally. But when i leave it for more than 1 hour in the sleep mode it will not recover, although i hear the normal sound of awaking/ accelerating disc. The screen keeps black and after a few minutes fans start blowing at full speed. Pushing 4 sec. the on/off button pulls it off.
I hope that someone can help me to solve this problem (me not being a tecnician at all) or that someone can give me a kind of diagnostic so that i can check the costs of profesional reparation. And start saving money for a new machine.
Any one any clue? Help would be very apreciated
Thnks

See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open console in Applications>Utilities, check the system log for the date/time of the last problem & the Startup right after that for clues.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Power Mac G5 Dual Core freezing

Hi,
Everything works fine with my G5 with 4GB RAM, except one thing:
Sometimes when I work for a long time, my mouse justs freeze,
The red light near the RAM slots appears and the fans start being noisy ! (LED 7—Checkstop: red—contact Apple or an Apple Authorized Service Provider)
I reboot and all just works fine until the next freeze
I ran Hardware test and apple diagnotics many times but all the tests including the ram test passed successfully.
It happens like 1 or 2 time by day. I couldn't identify the cause or the frequency of the problem (maybe Eyetv usb box, or a spécific app that causes the computer freezing ??? !)
Thanks for the help !
Power Mac G5 Dual Core 2,3 Ghz Mac OS X (10.4.8)

Curiously - we have two new Dual 2.3 G5s and they exhibit this same behavior. Suddenly freezing - and not necessarily while we have a lot of apps running. iTunes is always going in the background though. I'll start monitoring the temps on these machines and we'll see what happens. Does anyone know of a menubar app that might display CPU temp on the fly? Could be useful if we see a spike in temperature and then a crash.
One notable thing though, when it does crash, it crashes hard. Everything freezes, the audio (since iTunes is usually running) begins to skip on the last section of the track it was playing, sort of like a skipping record - only much faster. It also appears to have happened to one of the machines last night while it was asleep. I came in the morning the the fans were going crazy - and yes, the little red LED was on. What does that mean?
Dual 2.3 PM G5 Mac OS X (10.4.8) 4 GB RAM, etc.
iMac Intel Core Duo 20" Mac OS X (10.4.6) iBook G4, iBook G3, iPod Video 30GB, iPod Nano 2GB, iPod Mini, 2G iPod 20G

Power Mac G5 dual processor problem

So I've got a Power Mac G5 Dual 1.8Ghz that I bought used that only had one processor working. When started up, the screen hangs after the gray start up screen. I figure replacing both processors would fix the problem. Having bought 2 new processors, I installed them and now the computer won't boot at all. The power light comes on but doesn't stay on, the fans spin but nothing comes up on the screen. Is this a logic board problem? Any help would be appreciated.

BDAqua wrote:
Hi Jade8503, and a warm welcome to the forums!
After changing CPUs you need to calibrate everything for one, look for Apple Service Diagnostics, ASD 2.6.3 I think, not sure which G5s that is for actually, but it's a start.
2.5.8 should work on that machine as well.

HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
Hope this helps.

Seagate HARD DISK Barracuda 2 TB 7200 64MB SATA3: can I fit in a Power Mac G5 Dual 2,7 Ghz (early 2005)?

Can I fit this Sata 3 in a Power Mac G5 Dual 2,7 Ghz (early 2005)?
Is there anyone who has bought it?
Thanks.

Hello,
G5s require SATA 1.5 Gb/s, some SATA2 or SATA3 drives are SATA1 compliant & step down, others do not, still others will if there's a true SATA1 Drive in slot 0.

I have a Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an antennae?

I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.

Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out?

I have a Power Mac G5 Dual 2.3 running 10.5.8, I understand that I can not upgrade to Lion, so what will happen to my Mobile me, which I can not live with out? Also will I be able to get Icloud to work?

Hi Mary, the other so called "Features" of iClound will not work for like Syncing, but eMail will.
MobileMe & dot Mac will still work last I heard.
iCloud Mail setup, even in 10.4/10.5…
Don't delete your old account yet. Just setup a new one in Mail>Preferences>Accounts, little plus icon. Choose IMAP as account type, not ,mac or MobileMe.
IMAP (Incoming Mail Server) information:
          ▪          Server name: imap.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 993
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password
SMTP (outgoing mail server) information:
          ▪          Server name: smtp.mail.me.com
          ▪          SSL Required: Yes
          ▪          Port: 587
          ▪          SMTP Authentication Required: Yes
          ▪          Username: [email protected] (use your @me.com address from your iCloud account)
          ▪          Password: Your iCloud password

Power Mac G5 Dual 2.5 GHz running 10.5.8 cannot burn DVD+R

Hello all-
I have a Power Mac G5 Dual 2.5 GHz running 10.5.8 and I cannot burn DVD+R. Does that make sense?
If I insert a DVD+R into the drive, it just spits it back out. I've tried several discs so it's not a faulty DVD.
Help.
Thank you.

I've tried several discs so it's not a faulty DVD
I trust that is several different brands, not several different discs from the same spindle/pack?
Media varies.
http://www.digitalfaq.com/media/dvdmedia.htm
If you haven't tried a different brand, try a Verbatim or Taiyo Yuden.
You might also try burning in a new user account to rule out account software troubles.

Connecting Power Mac G5 dual 2.0ghz to a tv - DVI to VGA

Similar Messages

Maybe you are looking for