Connecting Powerbook G4, 15inch 1.5hz to Samsung LCD TV

I use my laptop to watch movies both through .avi files stored on my laptop and through iTunes downloads. I currently use an S-video cable but, I can not get good resolution on the TV.
What is the best, cost effective method of connecting my Powerbook G4 to my Samsung 32" TV? The TV has the following connections:
1. S-Video
2. HDMI
3. Scart
4. another one that looks like a monitor socket

I would use a DVI to HDMI cable, and you'll have to use a separate audio cable also. A number of people on Amazon have recommended http://www.monoprice.com/products/department.asp?c_id=109 as a good cable source. If you look in your Samsung user guide, I think you'll find that S-video doesn't support as high a resolution as HDMI.

Similar Messages

  • How do i connect mac book pro 5.5 to samsung lcd tv (series 5)?

    i have a macbook pro 5.5 and tried to connect it to my samsung lcd tv series 5 -  i have mini display port to hdmi cable, hdmi cable and phono to rga cable - i can see screen but cannot hear any sound... can anyone help?
    thanks

    I assume you mean rca... what is happening is you're outputting digital sound via your hdmi. Phono or anything analog will not work if you're playing using hdml, because it plays both sound and sends video. what you should do is plug the hdmi cord from your mDP directly into the hd tv, then run whatever sound output the tv has to what i assume is a reciever for sound. Let the tv decode the audio to then output to your "phono" or "rga".

  • Connecting my old iMac G4 to my Samsung LCD TV

    I have an iMac G4. The monitor went out years ago and I have been using an external monitor via the display port and adapter. The resolution on the iMac is set to the highest available on the display preferences. The monitor has always worked fine; however, I thought I would connect the iMac to my Samsung LCD TV (it's a few years old - 5 Series 1080). When I connect it to my TV via the "PC" connection option and select "PC" as the source, I see the splash screen (gray), but when the OS boots my TV says "Mode not supported." Anyone have any sage advise for me . . . I would love to utilize my old iMac for renting movies from iTunes.

    TVs have very specific resolutions, and your iMac predates widescreens in anything but movie theaters. So long story short, since your iMac can only mirror your built-in (well, attached in the case of the G4 models) you basically have a choice. Either the monitor runs at a resolution the TV can support, which is probably going to be 720x480, you get a special converter box, or you just come to the conclusion most do, and decide it's really just not worth the effort.
    If you had one of the newer iMacs where it's either a native 16:9 resolution or you could at least set an independent resolution, this would be much easier. As it is, you're pretty much screwed, sorry.

  • Connecting a Macbook Pro to a Samsung LCD TV. Can anyone tell me where to find information on what I need and how to do it?

    I want to connect my 2009 Macbook Pro to my Samsung LCD TV. I am afraid to go somewhere and ask and get bogus information so am putting it out here to see if anyone can help with the how tos and the types of cords/adapters I might need to purchase.

    You might profit from a visit to a Minneapolis Apple store. With a brand new Mac, I think they will be most helpful - not just with transferring files, but with other advice as well. And I strongly recommend you invest in a back up drive. The Apple folk can help with that as well.

  • Macbook Pro (late 2011) w/Samsung LCD (2011)

    I want to connect my new MBP 15" to my Samsung LCD.  After reading so many manuals/forums, I am unsure if the two are compatible.  If I bought a display port to HDMI adpator will that work or should I buy a mini display port to DVI adaptor and would I need a sound cable as well?  I am wanting to play movies from my external drive connected to my MBP (using Plex) on my HDTV.  All advice and opinions are welcomed!!  Thanks.

    You will need a Mini DP to HDMI connector and an HDMI cable.  See attached:
    http://store.apple.com/us/search?find=hdmi
    You can also use the Kanex Mini Display Port to HDMI Cable.
    This assumes you have a 2011 MBP.  A 2010 MBP will need separate audio connections.
    No DVI connectors are required.
    Ciao.

  • Connecting powerbook g4 to samsung lcd le32 r7

    does anyone know how to connect a powerbook g4 to a samsung lcd le32 r7. At the moment im using a dvi to vga adapter. The mac can see the tv but the tv cannot see the mac. i have tried different modes on the tv and different screen resolutions but none seem to work. The adapter works fine with a normal crt monitor is it worth buying a dvi to vga cable or does anyone know how to get it to work via dvi hdmi?
    powerbook g4    

    I would use a DVI to HDMI cable, and you'll have to use a separate audio cable also. A number of people on Amazon have recommended http://www.monoprice.com/products/department.asp?c_id=109 as a good cable source. If you look in your Samsung user guide, I think you'll find that S-video doesn't support as high a resolution as HDMI.

  • How can i connect my Imac late 2012 to my Samsung TV??

    How can i connect my Imac late 2012 to my Samsung TV??I have a hdmi cable stuck in my Tv and the other end a adapter from hdmi to mini display port. but it won't work I don't get no picture or sound on my tv

    I have an Apple tv and with this it works of course. But I wanted it to use with Windows 7 so I need to connect my imac to my tv...
    how can i turn it on in the settings? it won't work or recognize my tv

  • How do I connect my iMac to my Samsung LCD TV?

    I want to connect my 2009 iMac, Mac os x version 10.5.8 to my 2008 Samsung LCD TV, model LN32A450C1D.  Does anyone know what cords I will need so I can watch videos from my computer on my TV?
    Thanks.

    Your mac has a mini display port so you'll need to adapt that to HDMI on your TV. I have a mini display port to DVI that I bought from the Apple Store, then a DVI to HDMI adapter. Be aware that this will only carry the video signal, you'll need seperate audio cables to carry the audio signal. You can buy adapters for cheap but I've read of some people having problems with no name adapters working with their Macs, so I spend a few more $$ and shop at the apple store.

  • I am battling to connect my MacBook Pro to my new Samsung D7000 Smart tv. Both the tv and the macbook are on the same wireless network. Any ideas on how to solve this problem?

    How do I connect my macbook pro to my samsung smart tv its the D7000 and has all share?

    My suggestion is to get the magic trackpad, magic keyboard and magic wand and connect a DVI to HDMI cable and use the MBP in clamshell (closed) mode. This will allow you to run 1080P into the TV and essentially use the Samsung as a HUGE monitor. At that point you can use the TV itself to display whatever you want off the laptop or simply switch inputs and stream stuff out of smarthub as usual. I tried to connect mine via allshare (by the way samsung has the free allshare download of software for the PC but not the mac.) and while i DID have some succes (under windws) i had to run a non secure connection and in the end the cool factor wasn't worth the hassle, to me anyway. It was sort of a "cool i did it" now why bother..... Hope this helps.

  • Trouble connecting Macbook to Samsung LCD TV

    Hello,
    I tried connecting my Macbook to my Samsung LCD TV (through a DVI to HDMI cable) but I only got a black screen and "No signal". The macbook detects the Samsung and even displays "SAMSUNG" as a detected display.
    I checked the TV manual and there I found "Don't connect a PC or laptop computer to the HDMI/DVI connectors (it will result in a black screen)"
    Does anybody know why? Any solution?
    Will this happen with a MacMini too? I had the intention to connect it to my TV and use it as a media center

    Sorry to tell you that DVI does not support sound.  You either have to use a HDMI cable (with the appropriate adapter) or tap your audio output port with a 'Y' type cable configuration for sound.
    Ciao.

  • I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • How big of a hard drive can in a Powerbook G4 15inch

    I have powerbook g4 15inch, with a 60g HD, and I'm looking to upgrade it. How big and what you think i should get?

    Hello! You didn't specify exactly which model you had but look at THIS. Tom

  • Lenovo flex 2 can't connect to samsung LCD tv by HMDI

    I got a problem te connect my Lenovo flex 2 to my Samsung T200HD tv. wen i connect it says no signal... and yes i know i need to activate it from my computer. the thing is t doesnt find it. it says connect to screen by VGA... I dont have a VG poort, and i have no option to change it HDMI. The support desk of samsung say it my laptop software.... The thing is.. when i connected my laptop with the same HMDI cable to a other Samsung tv it works instantly. I have tryed all kinds of things and lloked on forums.. nothing worked... not updating the drivers... not reinstalling them.. i think its the combination between the useless Intel HD software and the Geforce software...  Does anyone has the same problem and a fix!  

    Update:
    I can connect through the IE Tabs extension on Chrome. In other words, when Chrome simulates an Internet Explorer browser tab, I'm able to connect. I'd still like to find a fix for this problem since I can't configure Outlook. Can anyone help me out?

  • Connecting my new sony str hd800 to my Samsung LCD.

    I want to make sure that HDMI out from the receiver to HDMI in on the TV is the way to hook up my receiver (Sony str dh800) to my Samsung LCD TV (think it is a 52" lcd 650)  I don't remember now but when I tried it (looked at it but didn't connect it) last night I didn't think it looked correct.  If I didn't need to help with the kids I probably would have tried it.  Just want to make sure!  Thanks! 

    right now I have it connected to the rca audio input on the tv

  • '09 mac mini connection to Samsung LCD

    I just purchased the new mac mini and am trying to hook it up to my 42" Samsung LCD using the mini display port and a VGA cable. The TV is not recognizing the hookup (PC is not an option in my list of sources). If anyone has any ideas or suggestions on things to try I'd appreciate it! I purchased my TV a little less than three years ago. It's an HD set - model LN-S4092D - in case that helps! Thanks!

    tbrodi,
    I do have the same stuff. only a newer version of the Samsung and an older mini.
    I use a DVIHDMI cable, connect the cable into port 2 on the tv and the audio jack from the mini straight to the input on the tv, the audio out from the tv is going to the recever/amplifier.
    At least, that works for me all in full HD
    rgrds
    McChiel

Maybe you are looking for

  • Programatically create adobe form?

    Hi, I have an interesting request from a client. They do surveys which they are now designing in Excel. The surveys are long and change for each job they do for their customers. They would like to be able to define a survey and have a program take th

  • Unpivot in ODI

    Hi all, I am new to ODI.how do i use unpivot in ODI? My Source Table is in below format Proaduct Jan Feb Mar 1 2 3 4 I need to transfer this data in below format Product Month Value 1 Jan 2 1 Feb 3 1 Mar 4 Please help me. Rama

  • How to install the iPhoto update?

    hi I have downloaded the iPhoto update from the iphoto support page and now i dont know how can I install it and when I click on it a page appears that says this file didnt recognized and I should say that I hava iPhoto 8.1.2 right now and I download

  • Consumption based planning in implementation ??

    hi Can some body explain me about the configuration setting in consumption based planning for manufacturing company  ?? FOr manufacturing industry, they have production , and plant maintaienance, and depot plant. For above business , what  setting we

  • RSS Feed to iTunes podcast

    My client uses iTunes to post their latest podcasts. Is it possible to have a RSS feed on their website that shows their latest podcasts?