Connecting printer to new wireless router

How do I switch from letters to numbers when trying to put in security code from new wireless router?

Keep pressing the same key over and over....
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

I have a new wireless router and now my laptop will not recognize the printer.

I recently installed a new wireless router,Linksys E2500, and now my laptop will not connect to my OfficeJet 4500 wireless printer. Operating system is Windows XP. Says it does not recognize the printer. It was working fine with my other Linksys router and I have been able to connect all of my other electronic equipment. Thanks.

You must reinstall the full feature software and drivers again to be sure it will work with the new router. This is the fastest way. Simply follow the instructions that came with the printer.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Installed new wireless router; don't know how to change printer settings

I just changed the wireless router which has created a problem with printing. I don't know what I need to do to change the printer settings to accommodate the new wireless router. Would greatly appreciate any help with how to do so. I'm on Windows XP, SP3 with a HP all in one on a wireless laptop (don't have wired connection). Wireless router is a linksys. Security AVG 8 trial version. Thank you!
This question was solved.
View Solution.

What is the model of your printer? Did you install the printer via a USB previously?
Please click on KUDOS if you find my solution helpful.

HT1365 just installed a new wireless router (cisco linkseys E1200) and our apple laptops connect fine on one floor but lose connectivity when moved to another. Other non apple laptops & Ipad connect with no problem no matter what floor they are on

We just installed a new wireless router to our main PC. It's a Cisco Linkseys E1200. All other wireless devices were able to connect without a problem, including my Ipad. We have 2 Macbook Pro laptops. They both connect just fine when on the same floor of our house as the router, but when we take them upstairs to the 2nd floor of the house, they lose connectivity and it states the wireless password is not the correct password. All other 2nd floor laptops have no problem at all with connectivity no matter where they are in the house. Please help- my husband is on the verge of selling Apple if that cannot be remedied.

This would not be a security issue symptom. I would consider checking for sources of wireless interference HT1365
Trying changing the radio channel on your wireless network.

Buying a new wireless router

I'm looking for a new wireless router, since the when I have is extremely old and cannot handle all te bandwitdh in my house. I need a router that can handle 3 computers, a XBox and my phone. My price range is anything from $50-$150 and nothing above that. Any suggestions on what router to get and where to get it (I'm not willing to buy online).

NETGEAR - RangeMax Dual-Band Wireless-N Router with 4-Port Gigabit Ethernet Switch
Model: WNDR3700-100NAS | SKU: 9331403
Expand your home or office network with this high-speed wireless router that features 4 Gigabit Ethernet ports for rapid connection and data transfer.
4.3 Read reviews (660)
Sale: $89.99
If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

MacBook Pro and Time Capsule after adding new wireless router

I have a MacBook Pro and Time Capsule (which functions wirelessly to router and computer). I added a new wireless router (netgear, not my idea) and had to change name of wireless network. Now Time Capsule flashes amber and does not show up in Airport Utility.
Do I have to set up Time Capsule from scratch? If so, if you can aim me to directions I won't have to waste tech support's time.
My additional question on a similar vein: I also have a Time Capsule (second time capsule) which is plugged into the wireless router using ethernet cable for use with a windows notebook running windows 7 which backs up wirelessly. Do I have to change anything on this Time Capsule (second Time Capsule) as a result of change in name of network (I've already adjusted computer to connect to network)?

Hi DD,
If you don't get answers here, try posting in the Time Capsule forum (http://discussions.apple.com/forum.jspa?forumID=1253) and/or the Time Machine forum (http://discussions.apple.com/forum.jspa?forumID=1342).

Can't get airport express to work with new wireless router

I just swapped out a linksys wrt54gl for a linksys E1200 wireless router on my home network. My PCs and iPads, and TV all made the switch to the new network fine, but the airport express isn't working. All I want to use it for is to transfer iPad audio to my home speakers. but my iPad AirPlay shows the old Airport as an option, I can switch to the Airport, no sound comes out the home speakers, then the iPad reverts AirPlay back to iPad. This model Airport just has power, USB, and LANA ports, so it doesn't seem like it would be complicated. A CAT 5 cable goes from the airport WAN port to one of the ports on the back of the new wireless router. What did I overlook?

I thought I'd jump in here with you network experts for some help with a related networking problem.
Equipment: iMac 24-inch, Early 2009 2.93 GHz Intel Core 2 Duo; 2 MBP w/Retina Display; AirPort Express version 7.6.4 (Conncected Using: DHCP; Router Mode: DHCP and NAT); Comcast/Xfinity Gateway 1 Modem w/2.4 GHz WiFi.
#1. Comcast forced me to change modems to their Gateway 1 saying mine was at “End of Life.” Previously, my home network was set up with AP Express and worked fine using my iMac as a server. After installing the Gateway 1, I could not get my network to work after repeated calls to their support, online chats, trial and error, reading community chats and articles, etc. I put the Comcast modem in passive mode using the “Bridge” setting and re-established my network with my AP. I’m using my iMac as a server for file sharing with my two MBP’s. The network isn’t recognized in sleep mode and will not wake from sleep and I can’t find it or Connect to Server when the computer is asleep. I’ve tried all combinations within the Energy Saver/Screen Saver/Security preferences. I’ve reset the SMC and other like resetting to factory defaults. How can I fix this and what are the correct settings for my home network to function again with my AP Express?
#2. TimeMachine stops doing backups when the computer is in sleep mode, understandably because I’m not making any changes on the iMac that need to be backed up. But using my laptops on the network, I am making changes in shared files that are hosted on the iMac that I would like backed up. I cannot get the schedule feature to work to wake up the computer long enough to do a backup nightly because, as a security feature, I log out after 30 minutes of inactivity. I understand the schedule doesn’t work unless you’re logged in. Is there a way for me to make this work?
Thanks!

Connecting Airport to Existing Wireless Router

This is driving me mad.....
I have a wireless router from my ISP and I can connect to the internet wirelessly with Vista PC, XP PC, iPad and my MacBook Air. I got an airport so I can plug it into a printer and my stereo. When I try to setup the airport to join my existing network it goes off to reset then disapears from the airport utility then is no longer visible when I select my network back to the existing wireless network. I've tried everything and must have et it back to factory default a 100 times. On the last go my wireless network completly stopped working. This should be simple right ?
The router is using WEP, password is correct, etc. Can I not do what I want with this device and I need to connect it to the wireless router with a cable from the airport ethernet ?
Please help before I chuck the airport in the bin......

Hi, I've just setup today my AirPort Extreme Base Station. It was very easy to do. I read you have an AirPort Express, well I hope this will help you, if not contact me please, maybe we can solve the problem together.
Use this link:
http://support.apple.com/kb/HT1731

I don't know what I am doing... just trying to connect WRT54G ver 6 wireless router...

I got a new laptop and connect to comcast just fine. Now I am trying to connect to linksys wrt54g wireless router. I know I SHOULD KNOW this.... but originally connected thru Motorola SB5120 modem thru ethernet cable. What do I do next? Would appreciate any help to assist... many thanks.
Solved!
Go to Solution.

If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link to configure the router.

I have on airport express that is 5 years old, I now have a new wireless router. I want to use the express just for air waving iTunes. How do I set it up?

I have on airport express that is 5 years old, I now have a new wireless router. I want to use the express just for air waving iTunes. How do I set it up?

Hello 84wvu,
It sounds like you want to setup your Airport Express to Airplay music from iTunes. I found an article with steps to help you get this setup:
Connecting to an existing Wi-Fi network, exclusively for iTunes music
AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
How to Set It Up
Connect your AirPort Express to your home stereo or powered speakers.
From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
http://support.apple.com/kb/ht4587
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Firefow will not open at all on one computer and on the other it opens but will not load. I just added a new wireless router, could this have anything to do with it, it had been working fine up until I installed it Tuesday night. Internet explorer won't

I installed a new wireless router on Tues. (May4) up until that time I had no problems using Firefox. Now I cannot get it to open on one computer, and the other it will open but will not load. Wondering if it has anything to do with the router, my provider or our computers. Again, it had been working fine. I am also unable to open interent explorer now on either computer.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; AOL 9.0; Windows NT 5.1; GTB6.4; AskTB5.6)

Sounds like a problem with the router installation/configuration (likely) or a DOA router (very unlikely).
Visit the forums for the router manufacturer (i.e., linksys, d-link, etc.) and ask for assistance there. There is probably a link to help listed in the router manual.

My iPad will no longer connect to my Linksys wireless router. Every other electronic device in our house connects just fine. What can I do?

I have an iPad (the earliest version) that used to connect to my Linksys wireless router with no difficulty. One night recently I could not get on the internet through my iPad. I checked the Wi-Fi information, which said it was not connected.When I go through the process of choosing a network, on which my home system is clearly listed along with a very strong signal strength, I am told that my iPad is unable to join my own network. All the other electronic devices in our house are connected and functioning fine. Can anyone walk me through the steps to correct this problem?
I need to add that I took my iPad to the Appple store, and the clerk there reset something--I don't know what--and my iPad was able to connect to their network. When I came home, though, I was not able to connect to my home network.

If everything else is connecting with no issues, I would go into the wifi setting on the iPad and redo the info there, user, password and anything else related to your wifi at your house.
It is possible whatever he reset may have reset something to default setting which will not allow it to connect. If you need too then verify the wifi setting by comparing it with another device setting that works on your home network.
Good luck

TS1398 Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation sam

Hi.. My internet and wifi are working on samsung phone and hp laptop but its not getting connected to iphone ipad, only skype is coming online rest all apps and safari show no internet connection. Got new linksys router WRT160NL , but situation same. Tried reboot, renew lease, forget network, reset network setting. Pls advice

Have you tried a simple reset of your iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, have you tried any of the troubleshooting mentioned in this Apple support document?
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Unable to use Internet Connect with my new wireless device

I just received a new wireless device for my macbook pro. Normally I sign on with Internet Connect, but after setting up the new card, I can only connect using Verizon Manager, which usually doesn't give me good connection, I don't know why.
I called the Verizon people, they mostly are clueless as to how I was able to sign on using both Internet Connect and Verizon Manager before with my old card. I remember there's a way of setting up manually if you want to use Internet Connect. Problem is, when I went to Systems Preferences and clicked on Network, a pop up prompt saying "your network setting have been changed by another application" keeps popping up even as I keep closing it. ***?!!! How can I get rid of it so I can change network setting manually?
I just want the option of connecting with Internet Connect with my new wireless device. BTW, when I try connecting with it using my old setting National access/ Broadband access , I get a message saying "the selected communication device does not exist".

"I just received a new wireless device"
If not from Verizon, then who? Did it come w/a manual? If not, have you contacted the vendor/manufacturer for instructions?
==========
"A Fix for "Your network preferences have been changed by another application" Error
In the Library/Preferences/SystemConfiguration/ folder delete the following:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
com.apple.nat.plist
You will have to re-configure all your network settings since deleting"
!http://i50.tinypic.com/izvwo1.gif!

New Wireless Router Shut Down the Phone Line

Just to clarify, I'm not the homeowner or the billpayer at the address that this post concerns. The home and phone belong to a relative who isn't particularly experienced in this sort of thing. She relative is away for the next two weeks, and I promised to try and figure out what was the problem.
A landline fault notice has been filed with BT, but I've been informed that they might not be able to make it out here until this coming Wednesday, so it would be convenient if I could troubleshoot it from my end and safe the technicians a trip.
My information on the issue is limited, having only briefly spoken with the relative about it. As I understand it, she upgraded her wireless broadband with Orange in order to attain speeds of 14MB and to have an unlimited data allowance. Upon recieving the new wireless router, she removed the previous one and correctly wired in the new one. Immediately after this, the landline and internet ceased to work. I've spent the last hour poking around and trying different phone ports in the house to no avail. The phones all say 'Check Phone Line'.
This is all extremely puzzling. I have no idea why plugging in a new router would cause the phone line to shut down. Does anyone have any insight into what might have caused this?

Flytch wrote:
I just went up to the 'main box' in the attic and plugged in an older phone. The line was still dead, which I guess means that whatever happened when the modem was plugged in happened outside the buildings.
Did you unplug the modem when you did the test in the main box?
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Connecting printer to new wireless router

Similar Messages

Maybe you are looking for