Connecting ps vita to macbook not working

can anyone help me with this please

I Don't have a HH but with the lack of other replies.....
firstly I am unclear if you are having issues within your local network or if you are trying to use the NAS features externally via the internet.
If internal issue then make sure that you have configured the NAS in the correct subnet and have connected it via a ethernet cable (not a usb one).
The defaults for HH are as I understand it
Gateway 192.168.1.254
subnet mask 255.255.255.000
Static ip address 192.168.1.xxx (where xxx is between 001 and 253)
Obviously if you use DHCP then you don't need to do that but I would be somewhat suprised if you set a NAS to use DHCP and kept risking the IP address changning (although if you access it via the netbios name only then that is not a issue probably).
if it is an external issue then you want to go a google on port forwarding for the HH, I would think that there are many detailed guides.
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’

Similar Messages

The wi-fi on my ipod touch is connected but the internett is not working! Help

Soo annoying, it's connected but the internett is not working. I don't know what to type in or what to do, so I need help.

Are you 100% positive you are connected? Head to Settings - Wi-Fi and tap the > next to the network you are connected to? What is listed for an IP address? If it's in the 169.x.x.x range, it means your iPod did not properly receive a valid IP address via DHCP from your modem/router. So the 169.x.x.x address is a self-assigned one.
This can usually be resolved by a reboot of your router. You can do this by unplugging it for about 30 seconds. After it powers back up, try reconnecting it. It wouldn't hurt to try a reset of your iPod as well. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting suggestions.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

I get wireless connection but my internet does not work on my ipad 2

I get wireless connection but my internet does not work on my ipad 2

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How can I make sure an url to connect to a webinar will not work in another browser?

How can I make sure an url to connect to a webinar will not work in another browser? The url is using a session cookie instead of username/password to authenticate the user and has the following form: /r5ygd62w5za/?session=breezrek22zu756wgzy8r&launcher=false&refresh_parent=true

Try the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint] add-on, it gives greater control over the zoom options.

How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

http://support.apple.com/kb/TS1538

Hi, i am not able to connect to the internet. wifi not working.

hi, i am not able to connect to the internet. wifi not working. not able to find proper drivers for 32 bit win.7 os. need urgent help..
This question was solved.
View Solution.

Hi:
I can give you the link to the wifi driver, if you do the following steps to post the hardware ID for the wireless card, so I can figure out what model wireless card the notebook has...
To find the hardware ID, go to the device manager and click on the device labeled Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window.

My MacBook Pro will connect to WiFi but will not work in one location but will at others. I have the same issue with my IPhone 4S at the same location.

My MacBook Pro will connect to Wifi at one location (this is a secure location) but will not allow access to the internet. I will put in the password but will not display page. Other wifi capable devises do not have this issue but my Mac and my Iphone 4S will not work. I have tried restarting the router. All other wifi locations I have been to have not had this issue. Any suggestions? I am realtively new to Apple products (less than a year) so any advise is greatly appreciated.

The other devices that are working got on with the same password. It says it is connected. Just nothing works on the internet.

My Macbook Pro doesnt seem to connect to my Belkin wireless router. It is connected but the internet would not work. any suggestions?

hey guys. I am having trouble with my internet. My MacBook Pro seems to be connected with Belkin wireless router, but the internet would not work. We recently changed the router so its pretty new, and it used to work on my HP laptop. Although there were some problems, it still worked. But now, the internet works and stops suddenly, and then works again.
I would love to hear some suggestions to get rid of this.
Thanks
Kiran

If you have not already done so, read the troubleshooting section in Belkin's user manual, contact their customer tech support by phone or go to its website. Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

Internet Connect ported over from from iBook to MacBook not working

I recently bought a MacBook to replace my iBook. Not wanting to bring everything over I chose not to use the migration assistant and opted to bring certain files and programs over via firewire target mode. One of my choices was to bring over Internet Connect since I thought that would bring over my VPN settings. I think, however, the G4 version may not be entirely compatible with the intel/universal aspects of my new and already beloved MacBook.
I can connect to the Internet without problem but when I open Internet Connect I get no signal strength indication, the base station ID is not available, checking the box to show the Airport status in the menu bar does not place the status in the menu bar (it shows up fine in the iBook and my iMac G5). The summary tab just gives me Airport link status not available but does indicate how long my current connectivity to the Internet has lasted.
Is there any fix or reinstallation for Internet Connect possible? Thanks.
iMac G5 and iBook G4 and now MacBook Mac OS X (10.4.2)

No part of the operating system from your G4 iBook is compatible with a new Intel MacBook.
You will have to replace any system files that you "brought over" from the G4 from the MacBook Installation DVD. The iBook is not Universal Binaries. That's why it is not working.
If you don't wanna use the migration, then you'll probably have to set up your VPN settings manually again.

Connection to server via smb not working

hi,
i have an old G4 iBook 10.3.9 that i'm using for school. to connect to our school server for course material, we were given smb log-in instructions from our it dept. when i put in the ip address, i get a prompt for the id and password, but i cannot get access. we tried logging on with my professor's macbook pro (10.5) and it worked flawlessly.
i've done all software updates and rechecked the procedure dozens of times, but i can't figure out why it's not working. if anyone has an idea, i'm all ears.
thanks,

created in my UTF-8 Mysql DB your table and inserted a record; the select shows:
SQL> select * from "movieclass"@mysql;
idClass
ClassName
123
H e l l o
As you can see the content is there, the "space" between the letters is related to unicode. Each character is interpreted by 2 bytes and SQL*Plus wrongly displays both. Using iSQLPLus or SQLDeveloper does not show the "space" between the letters.
Here the data type mapping:
SQL> desc "movieclass"@mysql;
Name Null? Type
idClass NUMBER(3)
ClassName NOT NULL NVARCHAR2(50)
What's the exact version of DG4ODBC you're using? 11.1.0.7?
According to the listener file you're using DG4ODBC on Windows. There was a high/low byte issue in DG4ODBC for Windows. This issue is fixed in 11.1.0.7 and a certain patch. So I recommend you to get first the 11.1.0.7 patchset (if you don't already have it installed):
6890831 Oracle Database Family: Patchset
11.1.0.7.0 PATCH SET FOR ORACLE DATABASE SERVER 11.1.0.7.0
and then please apply also the latest patch:
8689191 Oracle Database Family: Patch
ORACLE 11G 11.1.0.7 PATCH 16 BUG FOR WINDOWS 32 BIT 11.1.0.7.0
There was a high/low byte issue
Edited by: kgronau on Aug 11, 2009 10:28 AM

HP 4600 connected to time capsule is NOT working after SL

As a background, I connect my HP Laserjet 4600 to my Time Capsule using ethernet. From my macbook connected via Airport to the Time Capsule created network, I was able to print.
However, once I upgraded to SL, despite adding the correct printer in the print dialogue, it does not work anymore. From the print queue it says "Network host XXX is busy,...." XXX is the hostname of the printer.
Please HELP!
Thanks to all in advance.

Have a Look at this Discussion...
https://discussions.apple.com/message/15428508#15428508

Internet Connection through 90% of applications NOT working :(

So recently alot of my internet applications have stopped working. I use airport. My internet is connected to my computer and I know this because firefox, ventrilo, and video games such as warcraft 3 work using internet connection and my network preferences says that I have an IP and full bars. So the internet applications that don't work are safari, itunes store, my sophos updates, my software update (I am missing like 6 months worth of updates), etc. When I try to use the internet with these applications it will just say to check my internet connection or that I am not connected to the internet. I thought maybe it was a virus even though I have not known anyone I know that has a mac to ever have had a virus yet. So I went out and bought norton anti-virus and it scanned my computer and found zero viruses. So my question is, does anyone know what is wrong with my computer or how on earth I can fix it? I don't know how to wipe the harddrive so if that's what needs to be done please instruct me to a page that shows me how or just tell me. Also my macbook is about 4 years old and the version, I believe, is 10.5.6? Sorry, I'm not on my macbook right now so I'm not exactly sure as to the current version but it should be around there. Thanks in advance for any help you guys offer!

HI and Welcome to Apple Discussions..
Sorry to tell you this but Norton anti virus software can actualy damage a hard drive.
Read the second post here by: "Klaus"1
http://discussions.apple.com/thread.jspa?messageID=10399395&#10399395
There are no Mac viruses in the wild... it's not a virus.
Before you erase the hard disk and reinstall the Mac OS X, run Disk Utility from your install disk.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If the hard disk appears to be ok and there's plenty of free disk space then do the Erase and Install, instructions here...
http://support.apple.com/kb/HT1544
Make sure and back up all important data BEFORE doing this.
If you are running Leopard, the most recent version is 10.5.8.
Carolyn
Message was edited by: Carolyn Samit

IPad connected to TV using dim not working with iOS 7.0.2

Since updating my iPad to iOS 7.0.2, connecting my iPad 4 using hdmi to my tv is not working.
In fact, when connected, everything on my iPad is in slow motion. The iPad moves in slow motion. And there is no image being mirrored on the tv. This use to work fine before the update. Any ideas?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Connecting ipod touch to computer not working

when i connect my ipod touch to my computer it says that the required software is not installed and that i nned to remove itunes and reinstall it. well ive done it about 5 times and everytime the same thing happens. it worked fine before. then one day i plugged it in and this happened. help! please!

If you don't have access to a computer
If you are using Find My iPhone, you can use Remote Wipe to restore your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode.
With computer:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

HT1414 how do I enable my ipod. I tried to put my password and it locked it. its telling me to connect to itunes and its not working. what do i do

Can someone helpme pleaseeeeeeeeeeeeeee

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Connecting ps vita to macbook not working

Similar Messages

Maybe you are looking for