Connecting QLE2562 Host Adapter FCode(SPARC): 2.03 06/30/08 to MDS 9513

Hi, Did someone knows what this event mean:" E_IPS_INIT_FAIL"? It appears when I try to connect "QLE2562 for SPARK" and I run the following command:
show hardware internal fcmac port 43 port-event
Regards
Eugene

bash-3.00# uname -a
SunOS sparky 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Blade-1000
bash-3.00#
bash-3.00# lsiutil
LSI Logic MPT Configuration Utility, Version 1.40, September 23, 2005
1 MPT Port found
Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev
1. itmpt0 LSI Logic SAS1068 B0 105 01120000
Select a device: [1-1 or 0 to quit] 1
1. Identify firmware, BIOS, and/or FCode
2. Download firmware (update the FLASH)
4. Download/erase BIOS and/or FCode (update the FLASH)
8. Scan for devices
10. Change IOC settings (interrupt coalescing)
13. Change SAS IO Unit settings
16. Display attached devices
20. Diagnostics
21. RAID actions
22. Reset bus
23. Reset target
30. Beacon on
31. Beacon off
60. Show non-default settings
61. Restore default settings
97. Reset SAS phy
98. Reset SAS link
99. Reset port
Main menu, select an option: [1-99 or e for expert or 0 to quit] 1
Current active firmware version is 01120000 (1.18.00)
Firmware image's version is MPTFW-01.18.00.00-IE
LSI Logic
x86 BIOS image's version is MPTBIOS-6.06.06.00 (2006.03.22)
FCode image's version is MPT SAS FCode Version 1.00.40 (2006.03.02)
Main menu, select an option: [1-99 or e for expert or 0 to quit]

Similar Messages

Introscope host adapter

Hi
I am using solution manager 7.1 sp10
While configuring our new server in managed system configuring on step 7 configure automatically I get error at introscope host adater as below:
CX_AI_SYSTEM_FAULT : SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_TIMEOUT")
CX_SOAP_FAILURE : Error when processing Web service call
CX_SOAP_CORE : Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_TIMEOUT")
I checked parameter icm/server_port_0 it has correct value PROT=HTTP,PORT=80$$,TIMEOUT=300,PROCTIMEOUT=600
Then I check other servers which were connected successfully now they all are showing error at this step
Anyone has any idea how to solve this issue and why this issue is started?

Hi,
Check the below notes,
1962821 - Introscope Host Adapter setup activity fails because of a timeout
Rg,
Karthik

Scriped Host Adapter in IDM

Hi,
I just want to know is Scripted Host Adapter In IDM is supported for AS400 Machine.
As i know AS400 is using TN5250 emulation but Scriped Host Adapter support TN3270 emulation.
If any body have any idea about it will be great help.
Thanx
Shant

Hi,
could anyone provide me sample resource action files for modify and delete action for a scripted host adapter which is used to connect an mainframe resource?
Thanks,

Connection to host (ip adress), service timed out

Hi ,
I am getting the below error in dev_server0 while deploying the SAPJTECHS.SCA file in SDM.
[Thr 267] * ERROR       connection to host 192.168.1.15, service sapgw11 timed out
[Thr 267] *
TIME        Mon Jan 24 10:51:24 2011
[Thr 267] * RELEASE     640
[Thr 267] * COMPONENT   NI (network interface)
[Thr 267] * VERSION     37
[Thr 267] * RC          -12
[Thr 267] * MODULE      nixxi_r_mt.cpp
[Thr 267] * LINE        1109
[Thr 267] * DETAIL      NiPConnect
[Thr 267] * COUNTER     11
[Thr 267] *
[Thr 267] *****************************************************************************
Kindly suggest.
regards,
Mahesh.N.R

And below is the error in SDM log.
Jan 24, 2011 10:40:10... Info: End of log messages of the target system.
Jan 24, 2011 10:40:10... Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
Jan 24, 2011 10:40:10... Error: Aborted: development component 'com.sap.engine.docs.examples'/'sap.com'/'SAP AG'/'6.4025.00.0000.20091105122001.0000'/'27', grouped by software component 'SAP_JTECHS'/'sap.com'/'SAP AG'/'1000.6.40.25.0.20091119165445''/'27':
Caught exception during application deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.engine.docs.examples..
Reason: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].; nested exception is:
     com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:120)
     at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
     at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:153)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
     at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3187)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.engine.services.servlets_jsp.server.exceptions.WebFileNotFoundException: Possible reason: file name is too long.
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:795)
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:113)
     ... 19 more
Caused by: java.io.FileNotFoundException: /usr/sap/PQA/JC50/j2ee/cluster/server1/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/apidocs/allclasses-frame.html (Permission denied)
     at java.io.FileOutputStream.open(Native Method)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
     at com.sap.engine.lib.io.FileUtils.writeToFile(FileUtils.java:159)
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:784)
     ... 20 more
', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Cannot extract WAR file [temp_default.war] of application [sap.com/com.sap.engine.docs.examples].
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:120)
     at com.sap.engine.services.servlets_jsp.server.container.DeployAction.deploy(DeployAction.java:124)
     at com.sap.engine.services.servlets_jsp.server.container.WebContainer.deploy(WebContainer.java:153)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606)
     at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
     at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3187)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
     at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:330)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:201)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.engine.services.servlets_jsp.server.exceptions.WebFileNotFoundException: Possible reason: file name is too long.
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:795)
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractWar(ActionBase.java:113)
     ... 19 more
Caused by: java.io.FileNotFoundException: /usr/sap/PQA/JC50/j2ee/cluster/server1/apps/sap.com/com.sap.engine.docs.examples/servlet_jsp/_default/root/apidocs/allclasses-frame.html (Permission denied)
     at java.io.FileOutputStream.open(Native Method)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
     at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
     at com.sap.engine.lib.io.FileUtils.writeToFile(FileUtils.java:159)
     at com.sap.engine.services.servlets_jsp.server.container.ActionBase.extractClasses(ActionBase.java:784)
     ... 20 more

New Host Adapter plugin for Illustrator CC 2014?

I'm seeing that the Host Adapter plugin for Illustrator CC does not work for Illustrator CC 2014. I've checked that the AIHostAdapater.aip file is installed in the correct AI CC 2014 folder. But calling AIEventAdapater.getInstance().pingPlugIn() always results in "pingTimedOut".
Is there a new AIHostAdapater plugin forthcoming for Illustrator CC 2014? Or is it available somewhere to download? It is not available as an update through Extension Builder.

Hi Brian,
You can download the CC2014 host adapter plugins for Illustrator from the following URL
https://github.com/timothybrandspencer/CEP-Resources/tree/master/host_adapters/illustrator
Worked for me(verified of 64 bit installation of Illustrator on WIN and MAC), hope it works for you as well
Thanks,
Manan

SUNW.gds for jboss + Load Balancing Group = Failed to connect to host ...

Hi all!
In a simple two node cluster (Solaris cluster 3.2) with quorum server I've created a resource for jboss 5.1.0 using SUNW.gds. It is supposed to be load-balanced. To achieve that I've followed instructions from [http://download.oracle.com/docs/cd/E18728_01/html/821-1258/gds-25.html]
The command I've used to create the resource was:
clresource create -g scalable-rg -t SUNW.gds -p resource_dependencies=vip -p Scalable=TRUE -p Start_timeout=400 -p Stop_timeout=400 -p Probe_timeout=30 -p Port_list=8080/tcp -p Start_command="/opt/jboss-5.1.0.GA/bin/run.sh -b 0.0.0.0" -p Child_mon_level=0 -p Failover_enabled=TRUE -p Stop_signal=15 -p Load_balancing_policy=LB_STICKY_WILD jboss-rs
The whole configuration seems to work, but when the second node joins cluster, resource with jboss can't bind to shared ip address. There are many entries in /var/adm/messages like:
Jan 19 13:46:35 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 141062 daemon.error] Failed to connect to host vip and port 8080: Connection refused.
Jan 19 13:46:35 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 805735 daemon.error] Failed to connect to the host <vip> and port <8080>.
Jan 19 13:46:37 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 141062 daemon.error] Failed to connect to host vip and port 8080: Connection refused.
Jan 19 13:46:37 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 805735 daemon.error] Failed to connect to the host <vip> and port <8080>.
Jan 19 13:46:39 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 141062 daemon.error] Failed to connect to host vip and port 8080: Connection refused.
Jan 19 13:46:39 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 805735 daemon.error] Failed to connect to the host <vip> and port <8080>.
Jan 19 13:46:41 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 141062 daemon.error] Failed to connect to host vip and port 8080: Connection refused.
Jan 19 13:46:41 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 805735 daemon.error] Failed to connect to the host <vip> and port <8080>.
Jan 19 13:46:43 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 141062 daemon.error] Failed to connect to host vip and port 8080: Connection refused.
Jan 19 13:46:43 play SC[,SUNW.gds:6,scalable-rg,jboss-rs,gds_svc_start]: [ID 805735 daemon.error] Failed to connect to the host <vip> and port <8080>.
However, after some time, it finally somehow binds to shared ip and port 8080.
Is this something I should be worried about? Or it is a normal thing, since e.g. it takes some time to bring the interface with shared ip up? I've never had to install such configuration, and I don't have neither intuiton, nor the experience. Any help would be very appreciated.
Thanks a bunch,
Bart

Hi, a couple of things to check:
- did you check that both JBOSS instances were up and running?
- can you check in the logs (on both nodes) when a message saying something like "service .... registered..." showed up. This should show up for both JBOSS instances. From the time of the second "registered" message, the load balancer should sending incoming requests to both instances using its distribution mechanism
- did you check the vip address on one of the nodes on an external interface and on lo0 on the other
- connection refused looks like a server problem; can you connect to the JBOSS instance locally?
Hth
Hartmut

How can get Dreamweaver to stop error message: an ftp error has occurred- cannot connect to host?

Dreamweaver is locking me out when I try to connect to the host via ftp. I get the error message: "An ftp error has occurred - cannot make connection to host". This error message started yesterday when I used the wrong host ftp address too many times. I have since received the correct ftp address from my website host, but the system won't even let me log in...it just gives me that error message when I click the connection button on the panel. My website host recommends that I uninstall Dreamweaver and re-install it again. My concern is, if I un-install the Dreamweaver app, which I downloaded from the Cloud, will the Cloud know I've un-installed Dreamweaver and allow me to download it again? Please help.

See my response in your most recent thread. Please don't double post like that - it can confuse things considerably when replies come in to both threads.

Connected Digital AV Adapter to HDMI HD TV. Photo slideshow works fine but cannot play iTunes playlist concurrently (with sound turned off on slideshow)

Connected Digital AV Adapter from my iPad (64 GB 4G) to my HD TV. Tried playing slideshow (with sound off) concurrently with playing iTunes playlist. Video plays fine but no audio. iTunes volume indicator not showing any volume.

Just following-up on this posting from a week or two ago and another a few days later about the problems with catch-up TV. We were disappointed with the lack of service, but as we can get most of the catch-up we want on the Sony Bravia TV, hadn't pursued it with BT perhaps hoping things would improve.
Got a phone call last week from BT asking if we'd been able to set up the YouView Box OK, which we had. Mentioned the unsatisfactory service. She immediately put me through to the BT technical call centre in India where I spoke to guy called Rajiv or something like that. Asked a few questions and then asked me to switch off the YouView Box (back panel switch) and do a hard-reset on the Homehub Router. Once this had been done, and the YouView box switched back on. The service ran fine and has done so since. I don't know if Rajiv did anything in the network or whether this is just some problem (he called it a "glitch") in the router/YouView box. Funny that that the speedtest and streaming to the Sony TV works OK.
He phoned back a couple of days later to see if we'd had any further problems. Overall good service. It would be interesting to know from a technical point of view what the problem was and how it was solved. It shouldn't be necessary to reset boxes in this way.

HP MediaSmart Connect x280n AC Adapter HELP PLEASE!

HP MediaSmart Connect x280n AC Adapter HELP PLEASE!
Please someone tell me where I can get an AC for this unit and if not, please tell me the part number of this AC Adapter if you own one of these please? I have iterally looked for over 15 hours the past 2 days and called HP only to be passed on from department to department with not one clue as to this part number or where I can obtain an adapter for my unit. I found only 2 on ebay that had visible markings on the AC in the pics but could make out neither of their text.
Thanks in advance for any help.

Did you ever get an answer to this question?
I'm about to be in the same situation, and have been trawling the web to try to find a specification for the power supply.
I can see that the unit requires 19V at 22W, but that's all.
I don't know the size of the DC connector that is required.
Thanks!

I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

An FTP Error occured - cannot make connection to host. No response from the server

"An FTP Error occured - cannot make connection to host. No response from the server".
As of today this is all i get when trying to connect to every single ftp account i have. It's not the server cause it's every one and there is several different. Tried passive and non-passive same result. I've connected fine with other FTP clients. So this must be another dreamweaver bug. Anyone know what to do?

Very hard to diagnose these problems, particularly as you can connect using a 3rd party program.
See if the 'timeout' issue could be at play here:
http://forums.adobe.com/message/708941#708941

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

Multiple host adapter framework caches in PI 7.1

When I go look at the caches in my PI system, I get multiple host adapter framework caches. That is, when I navigate to http/<host>:50000/dir, then select "Administration" in the upper right hand corner, and then select "Data Cache Overview" I see the following:
af.<sid1>.<hostname1>
af.<sid2>.<hostname2>
Integration server (ABAP) --> this is fine
Mapping Runtime Java --> points to <hostname1>
Mapping Runtime Java --> points to <hostname2>
I just did a system copy (export/import) and I changed all of the parameters. Unfortunately, not soon enough.
Any help is appreciated...

Dumb question:
Do you delete the integration server under the SLD technical systems? That is, "Integration Directory, Adapter Engine, Integration Repository, and RWB (these are all that shows up). If I delete the adapter engine there (it is assigned to the wrong domain), is that the right way?
Or do you do it in the "CIM Instances" --> Class --> XI Adapter Framework (3) entry for the wrong server domain?

SATA Host adapter issue

Hey guys, I Believe that I have found an issue with the SATA host adapter in a Pavilion p6210y desktop. I have having trouble restoring the system after a hard drive replacement and I discovered that if I have BOTH the hard drive and the CD-ROM drive unplugged then the machine will boot. If I plug in either the hard drive OR the CD-ROM then the machine will hang on the HP BIOS screen. Voltage output of the PSU is normal. I'm thinking the host adapter (motherboard) is toast.

If you already haven't tried, reset the BIOS to 'Default Values'.Or if that doesn't work, try clearing the BIOS entirely by using the Clear CMOS jumpers on the motherboard or removing all power and the CMOS battery for several minutes. Also, you don't need a CD/DVD drive to run a system diagnostics.If you don't have the most recent version of HP Vision Diagnostics, download the most recent version onto a CD or flash drive using the steps in the Creating HP Vision Diagnostic Media section.* HP Vision Diagnostics is supported by systems manufactured between Sept 2010 > June 2012. You can also try BIOS diagnostics.If the computer does not boot, and you do not have a Vision Diagnostics CD available, use the BIOS diagnostic tests. The HP Vision Diagnostics tests are built into the BIOS of your computer and are a quick and easy way to identify basic computer hardware problems. HP 3 in 1 Diagnostics USB KeyThe HP PC Hardware Diagnostics 3-in-1 USB Key includes the latest UEFI based diagnostics as well as the older HP Vision Diagnostics. In addition to diagnostics, it now supports the recovery of a corrupted BIOS on supported systems. Download (3-in-1 USB Key v.3.1.0.0) If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

Connecting QLE2562 Host Adapter FCode(SPARC): 2.03 06/30/08 to MDS 9513

Similar Messages

Maybe you are looking for