Connecting Samsung Note Book

I'm trying to connect a new Samsung NP N110 Note book running Windows 7 to my 1Tb Time Capsule, how do I connect, the note book connects to the internet fine but it can't detect the time capsule. Do I need to change settings on the time capsule. Thanks for any info and merry Xmas.

You can't connect a PC to Apple TC

Similar Messages

  • Problem connecting Samsung Galaxy SII to Mac book Pro

    Hello. I have issue with connecting Samsung Galaxy SII to Mac book Pro Late 2011! When i connect phone to Mac via usb, phone makes sound but nothing happens. Even if i open Transfet tool. Problem is not in Phone or wire as on another computers like my MinMac it works fine. Also on Windows side all is ok. Mac book Pro USB ports also are ok as it finds and open my iPhone5! Is there possibility that there is some faults with USB drivers in Mac book Pro! How can i reset or restart usb drivers if fault is there! What else you can suggest to try?
    Thanks!
    Best regards,

    i did went to Samsung Support: here is the result of it:
    Isabella: Hi, thank you for contacting Samsung Technical Support. How may I help you today?
    Visitor: Hello Isabella. How are you today ?
    Isabella: I am fine. Thank you for asking.
    Isabella: Please proceed with the query.
    Visitor: I hope you can help me fix connecting issue for Galaxy S II with my Mac Book Pro late 2011. It was working till some day and now it does not recognise it when i connect phone via USB. I should note that on Windows on same machine or on my Mini Mac it works fine. so it can't be problem in wire or usb ports. Could not find answer in Apple forums and in forums they did suggest to turn here! I hope you can help me!
    Isabella: I understand that you are finding difficulties connecting device to Mac. Am I correct?
    Visitor: yes. but only to one specific Mac. as to others it connects without a problem.
    Isabella: Thank you for the details.
    Visitor: i think problem is in driver only i can't find how to manually remove from Mac
    Isabella: May I know the model number of your phone? To know the model number of the phone, please tap on Home>> Applications>> Settings>> About phone.
    Visitor: GT-I9100
    Isabella: Thank you for the model number.
    Isabella: However as you are able to connect the device to windows and Mini Mac then there is no issue with the device. This seems to be an issue with the Mac.
    Isabella: However we in Samsung US do not have the instructions on uninstalling drivers on Mac.
    Isabella: I request you to contact apple for support related to Mac.
    Visitor: Yess it is probably issue with drivers on that particular Mac. Might be you can guide me to location where Kies or phone driver is stored on mac? I then will try to manually delete is from system or replace from another machine
    Isabella: The model number you have provided is an international model and we do not have any information on the device you are referring to.
    Isabella: I would have surely provided you with the information if we had the information available with us.
    Visitor: If you don't know might be you could escalate to some higher level ?
    Isabella: It was a pleasure assisting you. Thank you for contacting Samsung Technical Support. If you have a minute, please click on the blue “X close” button to receive a transcript of your chat and fill out a brief survey to help us serve you better. Have a wonderful day!
    Chat session has been terminated by the Samsung Agent.
    So i was terminated and left without answer. But i did not expect anything else from Samsung Support..
    So might be someone of you know where drivers are located? i could try to copy them from one machine to another manualy!!!

  • What cords should i get to connect my mac book to my samsung tv?

    what cords should i get to connect my mac book 2012 to my samsung tv?

    JShimazaki wrote:
    Macbooks never had HDMI ports so you will need to purchase a DisplayPort to HDMI adapter and a HDMI cable. For HDMI, any brand will do. Get the cheapest you can find because they are all the same.
    It's actually a Mini DisplayPort, so you'll want that type of plug on one end. Also, the cheapest is not always the best because it is possible to make a bad or outdated HDMI cable; if it's important that you have proper support for the latest HDMI standards with a high-end home theater you want to make sure the cable actually can do it. Monoprice.com has a couple of types of HDMI cables and even the better ones are still cheap.

  • HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

    Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
    <E-mail Edited by Host>

    It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
    I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
    So what to do, what to do.
    Well there is hope for you as long as the drive wasn't Filevaulted.
    I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
    When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
    Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
    The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
    It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
    So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
    The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
    So what you will have to do is this:
    Create a data recovery/undelete external boot drive
    or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

  • HT3805 buy book feature not working "a connection could not be established at this time etc...." How do I fix this? I am running Mountain Lion with Aperture 3.3.2

    I have the same problem as many of you on this forum,
    Aperture will not allow me to buy a book. It says a connection could not be established at this time.
    I have a 2011 17in MBP, running Mountain Lion, Apertaure 3.3.2 purcahsed from the App Store, a 100Mb network connection, based in Staffordshire UK. It acts the same over wifi or ethernet, e.g a connection could not be established at this time.  It makes no difference if I am signed into the App store or not.
    I have spent 5 days preparing my Wedding album images for a 30 page book with lots of adjustments, therefore, I am desperate to fix this and as I paid £55 for the software I want it to work.
    Can anyone help?
    Regards
    Tim

    I still don't know what happened to my test Aperture Library after the update to 3.4...Not only were my previews lost, but so were the original images!  Needless to say, I haven't bothered to update the main library on the Mac Pro because I don't want to deal with this level of uncertainty (even with backups in place).

  • Connecting Windows-based XP note book to printer

    I have a an Airport Extreme and configured network through my iMac. I can connect wirelessly to the internet with Dell Latitude note book no problem, but I want to be able to connect to the printer that's connected to the Airport Extreme. Can anyone help?

    Please check out the following iFelix articles to see if they can help:
    o Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
    o Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express

  • "A connection could not be established at this time."  Book Ordering Issue

    Since upgrading to Snow Leopard I have not been able to Buy a Book via Aperture. Whenever I click on the Buy Book Button I get the following error message:
    "A connection could not be established at this time. Please ensure your network connection is active and try again." The network connection is fine etc etc.
    I tried creating a new user account but this did not solve the problem. I have opened iphoto and the same problem exists there. Apple help desk want to charge me £180 to fix a problem which will allow me to spend more money ordering books with them. Any ideas how I can fix this?

    Apparently there's some extensive maintenance taking place which affects the ordering segment - I'm running into the same issue. I'm guessing it might be back up later this evening. Will try then.

  • Not able to connect Samsung Galaxy S3 to Mac Pro

    Hello Dude,
    I heade your help here .
    Last week I bought MacBook Pro notes and Samsung Galaxy 3 mobile.I have Installed OSX V 10.8.2 and Windiws 7.
    I'm able to connect Samsung Galaxy S3 when i login to Windows 7 and able to transfer files.
    The problem is I'm not able to connect Samsung Galaxy S3 moble when I login to Mac OS I insalled Kies and Android File Transfer softwares and tried .Stll not able to connect and not able to copy files into mac .
    Could you please help me to resolve this problem ..Thank you in advance..
    Best Regards.

    You'll have to take the issue up with Samsung etc.,  why their software is not working.
    you can run through this to see if it's your Mac that's a issue after that
    ..Step by Step to fix your Mac

  • Candy crush will not connect to face book

    Candy crush will not connect to face book

    I was able to use candy crush with facebook to receive more lifes and be able to play the game better. Now it will not what has to be done to fix something like this?

  • TS1347 How can I send my address book to my new samsung note 10.1 2014 edition?

    How can I send my address book to my new samsung note 10.1 2014 edition?

    Sync it to an app on your computer using iTunes, then sync your Samsung to the same app. Or sync your address book to gmail, yahoo or hotmail, then sync your Samsung to the same service.

  • Samsung Note 2 won't connect.

    Hi guys, I am trying to connect a Samsung Note 2 to my Macbook Air and the device is not recognised.  I have installed Android File Transfer and it still won't work.  Any ideas?

        JTJACKS, let's get you connected to WiFi. I recommend that you power cycle your phone off/on to soft reset it. Additionally, you will also need to verify that you've entered the correct WiFi password for the device in your house. Keep us posted.
    LasinaH_VZW
    Follow us on Twitter @VZWSUPPORT

  • Is there anyway I can connect my Mac Book Pro wirelessly to my samsung ES8000

    Is there anyway I can connect my Mac Book Pro wirelessly to my samsung ES8000?

    IOS?
    Do you mean OSX (or is there another device you have yet to mention)?
    If it is OSX connect the phone via Bluetooth and use the Browse Device command to access files. I have no idea whether this will work but it won't break anything.

  • I am not able to connect my Mac book pro with iPhone 6  using bluetooth

    Specification of my Macbook Pro :
    Model Name:                         MacBook Pro
      Model Identifier:                   MacBookPro11,1
      Processor Name:                Intel Core i5
      Processor Speed:               2.4 GHz
      Number of Processors:       1
      Total Number of Cores:       2
      L2 Cache (per Core):           256 KB
      L3 Cache:                            3 MB
      Memory:                              8 GB
      Boot ROM Version:             MBP111.0138.B11
      SMC Version (system):       2.16f68
      Serial Number (system):     C02M4ZD0FH00
      Hardware UUID:                  1D25A9C3-C1ED-550F-8743-FF6DEAD9A59D
    OS : Yosemite 10.10.1
    I am trying to Handoff between my Macbook pro with IPhone 6+, however it is not happening. Even the Bluetooth connectivity is not
    happening between the devices.

    Try going to System Preferences/Bluetooth and then turn it off, wait a few seconds, then turn it on.
    Bluetooth Quick Assist

  • Connecting Samsung Wireless Printer w/MacBook

    Im having great difficulty trying to set up wireless printing between my MacBook and a Samsung ML-2955DW wireless printer. I wanted to check in on these forums first, before calling Samsung, because, admittedly, I need help with the basics. And, I would like to gain a better understanding about what it is Im supposed to be doing before speaking with them.
    The "Players" are as follows:
    -MacBook 2GHZ Intel Core2 Duo... w/System 10.5.8
    -(2006) PowerMac G5... w/System 10.4.11
    -Samsung ML-2955DW Printer
    -Airport Express Brick 802.11n
    -Realtek WLAN Wireless Wifi USB Adapter
    My first question is... is this even possible with the set-up that I have? My G5 does not have Airport built in. I had to buy the Wireless Wifi USB Adapter to plug into the back so that my MacBook could link with it.
    I was going with the notion that it is possible and tried to set-up the printer according to what the Samsung instruction book calls an Infrastructure Mode Set Up; that is–connecting to the printer via a router. For this set-up they show a diagram where the supplied USB cable connnects directly into the back of the Desktop computer.  The directions continue with how to change the IP address, Subnet Mask, etc... and then they end. So am I to assume that if I am able to complete the installation process to my Desktop computer I will then be able to install the driver on my MacBook and be able to print wirelessly? I have tried this method with no success at all.
    The furthest I got with trying to get a connection was by following directions posted on MacRumors for another wireless Samsung model. They instructed connecting the printer directly to the computer with an ethernet cable (not sure if they meant to connect to the desktop or laptop, I connected it to my desktop, as it wouldnt work at all connecting it to the laptop). I was able to get the IP, Subnet, etc.. info from the printer by doing this and changing it to my network settings via their Sync thru Web method. However, in the end, I could not change the TCP/IP setting to DHCP or set up the wireless printing.
    Thank you in advance for any help with this, I can surely use it.

    This is for Snow Leopard, which you show you're using - might be of some help. I have a Canon MG8120 which I print to with ease (scan, too). During your setup, you should have had the printer 'seen' on the network.
    Regards,
    Clinton

  • Samsung Ativ Book 9 Plus 8GB i7 Core ultrabook, when?

    When will Best Buy offer the Samsung Ativ Book 9 Plus with 8GB Memory, 256 SSD, i7 Core processor?
    Samsung released it not too long ago, but I only see the one with 4GB, 128 SSD, and i5 Core processor on the Best Buy website.

    There is not that much activity here..
    I had some more time today to try fix the problem, I got some more data from dmesg that can be seen here:
    http://pastebin.com/Cdh7W7fL
    I also found this http://www.geekdevs.com/2010/04/solved- … -ehci_hcd/
    I am not sure that it is wise to disable ehci_hcd, but I found in the comment that one had a problem whit his webcam that is loaded by both ehci_hcd and uhci_hcd and therefore is switching between connected and disconnected, I am not sure about what is going on with my problem so some tips or help would be great
    UPDATE:
    If I run
    # modprobe -r xhci_hcd
    then the messages stop
    Last edited by SSTC (2014-05-20 02:21:41)

Maybe you are looking for