Connecting satellite system through Sol Man

Dear friends,
I am working on Sol Man 4.0 SP 12.
I have properly set the T-RFC roles to users in both satellite system as well as in Sol Man system.
Now i want to execute the transaction MM01 (creation of material master) from Sol Man. If i execute the transaction, i am getting the message that
"The new session will be created in SD1 system".
The SD1 system is my R/3 dev system. But the new session is not at all getting displayed.
I could not find the reason. If there is a problem in RFC, system will clearly tell the message.
Could anyone suggest me reason for this kind of system behaviour?
Regards
Senthil

Dear Senthil,
Have you defined any user for the RFC's specially the Trusted RFC ? If yes is it an Dialog user or an communication user ?
Also does the userid in Satellite system have the authorization to execute MM01 ?
Regards
Amit

Similar Messages

Generation of Configuration document through Sol Man

Dear Friends,
We are using Solution Manager for our R/3 implementation. In realization phase, we are capturing all transports in BC sets through Sol Man. Via Sol Man, i am executing t.code SCPR3 (Maintain BC set), after capturing all the confugurations in BC set, i am maintaining configuration related details in the same BC set, as below.
In SCPR3 t.code, in top menu,
Edit-----Add documentation.
Here i am maintaining all configuration related details. And saving as "Raw version".
The same way, for all the BC sets, i am maintaing the configuration related details within the same BC set itself.
My client requirement is:
1. Now i am calling all the BC set in Sol Man (t.code SOLAR02, "Configuration" tab, under "type" coloum, i am selecting, "BC set".
2. Now, if i generate "Configuration Guide", the system has to automatically pick the the configuration details, what i have maintained in the BC set (as Add documentation).
How to do this?
regards
Senthil

Dear Friends,
In SCPR3 t.code, in top menu,
Edit-----Add documentation. can we make this "Add documentation" to be mandatory? So without entering the details, one should not possible to SAVE the BC set.
Can we make any settings for this?
Thanks
Senthil

R/3 implementation through Sol Man

Dear friends,
We are doing R/3 implementation through Sol Man 4.0.
We have created the project in Sol Man. For all the consultants the direct access to R/3 Dev is blocked. They have to go to R/3 Dev via sol man only.
In SOLAR02 t.code, under configuration tab, we are requesting the consultants to capture the configurations under the type "IMG Object" & by giving the proper logical component, it is taking to R/3 Dev client. Then the consultants choosing the relevant IMG nodes. The same IMG nodes are getting saved in Sol Man with IMG object.
Now for example, for define order type dependent parameters, the system is capturing the IMG Object "PPPI_PO_212" .
But the consultants know very well the relavent t.code for doing the above same configuration is OPL8.
Like above, by knowing the IMG Object, can we find the t.code relevant for that IMG object?
Regards
Senthil

Hello!
In your Dev client,
Come to Display IMG screen thro' SPRO
From the menu choose,
Additional information>Additional information>Display key>IMG activity
Now the additional information column will give you the IMG object name followed by the transaction. Usually the last three/four characters.
Hope this helps.
Kathir

Step by step guide to connect Satellite systems to SOLMAN....

Hi all,
Can you provide a Step by step guide to connect Satellite systems like (SAP CRM, SAP ECC 5.0 Etc..) to SOLMAN and also what are the major config steps involved in connecting a satellite systems to Solman.
The connection is basically to monitor key performance issues of the satellite systems through Solman....
Need ur inputs on this...
Thanks and Best regards,
Subba

Hi,
In a system landscape you can only add logical components. Please double click on the name of the logical components. You will arrive in the maintenance area for logical components. There you can add systems to your logical components.
Check the following links also.
satellite system
Solution Manager - How to connect to satellite system ( refer this)
Re: Service desk RFC destination in the Satellite system
Re: Satellite Logon
Regards,
Note: Points always encourage me to reply !!

CHARM - diff between packages in file system vs sol man

Hi Experts,
We use CHARM to transport our Portal packages (e.g. EPA, KMC packages). My understanding is that these packages can be downloaded from the file system or through STMS in Solution manager. However, we noticed that for the same transport requests, it contains different packages in file system than in solution manager, which is perplexing. E.g. PD3K90009X has 1 EPA file in Solution manager while we see 3 different EPA files in file system. 1 of the EPA file matches the 1 seen in solution manager, the other 2 we found, belong to other transport requests. Any idea why for the same transport, it would contain different packages in the file system than solution manager?
Thanks,
ZM

The problem was resolved and it was largely due to missing prerequisites although the system met the required SPS17 requirement. The lesson learned here is that for newly built Sol Man 700 systems, it's best to do the basic configurations to get Maintenance Optimizer going so it can be used to select and download EHP1 packages. The traditional SMP SWDC packages selector via identification of source and target releases didn't give the complete prerequisite packages for EHP1 SAINT import.
Cheers
Ben Trinh

Error in Managed System Configuration - Sol Man 7.1

Dear Experts,
Whle configuring using solman_setup, I am getting below mentioned error in Managed System Configuaration:
Cannot retrieve CIM Instances from CIM Class 'SAP_DiagnosticsRelevantSoftwareFeature'!
Cannot retrieve all CIM Instances from CIM class name 'SAP_TechnicalScenario' via LMDB Mass Access API!
Cannot retrieve all CIM Instances from CIM class name 'SAP_DatabaseSystem' via LMDB Mass Access API!
Any suggestions??
Regards
Vivek

Hi Paul ,
Thanks for the note that you provided.
I am reconfiguring the LMDB and conteny Sync... The refresh will take 15-16 hours.. I am just waiting for the
sync to be finished. Let's see what is in the store for me
Keeping my fingers crossed untill then.
Regards
Vivek

Block direct logon to satellite system

Dear friends,
I am working with Sol Man 4.0 SP12.
I have connected R/3 with Sol Man. The user ID has been created in Sol Man As well as in R/3. (In both the systems the user ID is same)
Now the user can logon to R/3 system via Sol Man (T-RFC role has been assigned to him).
But still the user is logging into R/3 system directly & performing the configurations. We want to block this option. Without Sol Man, he should not able to get into R/3 system.
One work around might be, change the password & do not inform to the user.
But for our case, we having about 185 consultants to do the configuration.
If i lock the user ID in R/3, i can not logon through Sol Man also. So this option is invalid.
If i maintain him as "Service" user also, he can directly logon to R/3. So this option also invalid
If any other work around is available please guide me.
Regards
Senthil

Dear Senthil,
Your question is more from an Process point of view rather than Solution Manager.
I assume that you are using Solution Manager to implement your SAP solution.
There are 2 possibilities here :
1. Roll out an standard process for all the 185 consultants working with you and strictly instruct to perform the configuration using the Solman route. In case of violations lock the userid's and get your senior mangement involved.
2. Start using Change management. If you activate change management then no one can create an transport request in the satellite systems without routing it via an change request in Solution Manager. This way even if the consultant logs in to satellite system his work is useless and he is forced to follow the Solman Route.
I hope that the above tips helps.
Regards
Amit

Error while creating the support message through "Help" in sol Man system

Hi All,
I am creating the support ticket in solution manager system through "Help". After entering priority, short & long description, i am getting following error:
Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
Message no. BCOS088
Note: Component is getting defaulted.
Please guide me on this
Regards
Senthil

check this IMG activity
SPRO --> SAP Solution Manager Implementation Guide --> SAP Solution Manager -> Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Specify Satellite Systems Connection -> Define Service Desk Destination in the Satellite Systems
Define Service Desk Destination in the Satellite Systems
Use
In this IMG activity, you make the necessary settings in the satellite systems to enable users working in those systems to send problem messages to the central SAP Solution Manager system.
Requirements
Basis/ABA Support Packages have to be installed on the satellite systems. For further information, see the SAP Solution Manager Configuration Guide.
Activities
In the satellite systems :
In view 'Create Messages: Customizing' (Transaction SM30, view BCOS_CUST), make the following settings for the application OSS_MSG:
Column 1: Application: OSS_MSG
Column 2: + : W
Column 3: RFC Destination:
Column 4: + : CUST620
Column 5: + : 1.0
Note:
We recommend to use the back destination you have already created.
If you want to use a back destination you have created before SAP Solution Manager Release 3.20 SP05, proceed as follows in the SAP Solution Manager System:
Generate the following roles in transaction PFCG.
Assign the following roles additionally to the user for the back destination:
SAP_SUPPDESK_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN

Connection From Satellite System to Solution Manager for key users

Hi All,
Can anybody suggest which RFC connection/destination should be maintained in BCOS_CUST table under satellite system to connect to Solution Manager.
1. SM_SSMCLNT010_TRUSTED
2. SM_SSMCLNT010_BACK
I don't want user to Login to solution manager while creating a support message. They should create a support messsage seamlessly from satellite system.
Any help is greatly appreciated.
Thanks...

Thakur,
Sorry for the cryptic answer back there - read it myself and it didn't make much sense to me either so here we go with the seamless way to allow users to create service messages.
There are 2 ways to do this - 1 way is to use a connection like the 'BACK' connection but if you do this - all user tickets entered will have the username of the 'BACK' connection logon id as the message creator. The other way is to use the trusted connection so the userid of the person logging the message is transfered with the created ticket.
I will assume that you want to preserve the unique userid and use trusted connections. So here we go:
Step 1 - Go into BCOS_CUST on the Satelite and put in your TRUSTED RFC Connection as the detination for the Service Messages - either use the one that Solman created when generating or make your own ABAP Trusted Connection.
Step 2 - All users in Satelite and in Solution Manager need to have Authority Object S_RFCACL assigned to their userid's so they can use the Trusted RFC Connection (this is not in SAP_ALL or SAP_NEW).
Step 3 - All users that will use this method of creating service tickets need both a userID and a BP with the respective system keys to allow them to enter tickets for those Satelites.
That is all there is to it assuming that all issues with Trusted Connections have been worked through already (test this in SM59 by going to your 'TRUSTED' connection on the Satelite and execute the RemoteLogon button - you should be sent to the Solution Manager with out having to logon).
If this answers your question, please set this message to answered.
Edited by: David Milliken on Jan 25, 2008 1:55 AM

Problem in connecting to Sap R/3 system through Crystal Reports

Hi
while I am connecting to Sap R/3 system through crystal reports i am getting an error
(" you do not have a necessary rights to design reports against sap system ")
can anyone sort out this problem?
Thanking in advance

you need to add some transport files while installing the integration kit for sap solutions.check whether all transport files are added

Connecting to BW system through VPN in Design Studio

Hi Experts,
I tried to connect to my client BW system through VPN and used the URL in my Design studio, but when I connect like that the Design Studio is working very slowly and hanging several times, If I connect to the same system via Lumira it is working fast.
Can you please suggest me what are the cautions I need to take when I connect to BW system via VPN to make my Design Studio work fast with out hanging several times on my local system.
Thank you,
Hari

Hello Hari
remember that Design Studio is a live connection and in Lumira you can use a BW offline connection which downloads the data.
regards
Ingo Hilgefort, Visual BI

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

Connecting to R/3 System through Java Web Dynpro forms.

Hi,
I have a requirement in which I have to send data to R/3
from Java Web Dynpro screens.
I will design the Java Web Dynpro screens and write a RFC Model.
I will write a RFC in se37 which will connect to the RFC Model.
Before creating the RFC in se37, I will create ztables in se11.
I will write a ABAP Report to see that all data enters the ztables.
I need some guidance with regard to this.
Do, the RFC Model have the access of the ECC(R/3) System.
What are tasks to be told the Basis guy so, that RFC being called from through Java Web Dynpro?
Please provide me some documents with regards to this scenario.
Regards
Neha Singh

Hi Neha,
The steps you provided is clear enough to connect to a R/3 system through the WD forms.
On creating the model you need to give two inputs such as
logical system name for model instance
logical system name for RFC metadata
there will be 2 default values, also you can create your own JCOs in the <servername>:<port>/devinf of the server or u can ask your basis team also.
Before creating the JCO , the SLD (System Landscape Directory) needs to be configures, that your basis team will know.
other than that once you create the functional module in se37 make it RFC enabled , and once you import the RFC model , you can give your ECC system user name and password and search for RFC you have created from the list of RFC.
Regards,
Sam Charles J.

Connecting SLD to Sol Man 4.0

Hi all,
I am trying to push my sld data to Sol Man 4.0. I have set up smsy_setup and ran sldcheck and set up sldapicust and everything seems o.k. but when I try to execute the job to pull data (SMSY_SETUP) and I review the update log I see a message stating "the sld server is inactive" and I am not sure why. I can log into sld and it's up an running so I don't know where to turn next.
One thing I do get is when I run sldcheck there is a message saying "No business systems found"?
Thanks,
Rodney Miller

Hi Rodney,
is the SLD brigde also running?
Go into SLD -> Administration -> Data Supplier Bridge, set update local SLD to true and start the bridge.
Business systems are only needed for XI, but not for what Solman is using.
Regards,
Pascal

Connecting satellite system through Sol Man

Similar Messages

Maybe you are looking for